Image Capture does not have a 'Devices' option

I have a new scanner and I installed the drivers. It's showing fine in Photoshop CS3 but the window for it is awkward and small and barely has any features to it (there is no selection to for Advanced either). I figured I should try to use Image Capture instead, hoping to have better luck and more features. However Image Capture is not allowing me to go to 'Devices > Browse Devices' because there is no 'Devices' menu listed at all. I've restarted, unplugged things, plugged devices back in. It just says 'No Camera or Scanner Selected' ... the Command B is not even working either.
Has anyone ever had this happen, should I try reinstalling Image Capture?

As for the scanner - so is this new one wireless? When I hooked up my Epson All-in-One, I had to install it via USB first before I could install the wireless (per their instructions).  With Snow Leopard, I simply installed the driver and it covered and recognized both the print and scan function - not so in Lion; I had to go through hoops with the scanner part and it finally showed up as a separate unit. I thought that is silly, but - as long as it works.....  I'm trying to think of possibilities since I'm about out of ideas, so you might want to consider that (if it applies). The other troubleshooting suggestions usually include redoing the "add" function after a reboot.
As for Image Capture, I am out of ideas. FWIW, I never use it - in my workflow, there is no need for it. Not sure if this would have an impact, but make sure that you choose Image Capture in the CDs&DVDs Preference Pane (mine is set to ignore or ask purposely):
If that does not work, I'd suggest reinstalling the OS over the top of what you have.

Similar Messages

  • My Itunes page does NOT have a "device" option which is necessary to sync.  What to do???

    Hi ....I am trying to sync my Ipod to my computer.  I have downloaded the latest version on Itunes.  Problem?  Mu I tunes page does NOT have a "device" option which is necessary to sync.  What to do ???

    Verify you are syncing correctly witth iTunes 11:
    iTunes 11 for Windows: Syncing overview
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    Next try:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Plug in my iPhone to Mac; image capture does not appear

    Software  OS X 10.8.5 (12F45) on MacBook Pro
    iPhone: Version 7.1  (Is it an iPhone 5: LOL… I don't know! It's the newer taller, round one!)
    When I plug in my iPhone to my MacBook… my pictures do not load like usual.
    (Same thing when I put in a photo card)
    Sometimes the device will appear; but import is not an option to select.
    EVEN if I change the parameters down on the bottom left to Image Capture, iPhoto, etc.
    Usually, my phone will appear on the left hand side and I am able to click Import.
    However; this time NOTHING happens.
    Can someone please help?
    All the directions I have read through (dozens!) for the last 5 hours do not give the step on what to do IF the Image Capture does not work.
    Same thing in iPhoto.  Nothing. Nada.
    I have plugged and replugged.
    Tried different cords.
    OH, help! Please!

    Hi solutionfocused,
    Welcome to Apple Support Communities.
    It sounds like there is an issue importing photos with multiple devices and applications on your Mac. The article linked below provides a lot of great tips that may resolve the issue, like taking a screenshot to ensure there is a new photo to be imported since the previous import.
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/TS3195
    I hope this helps.
    -Jason

  • After upgrading to Lion Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    After upgrading to Lion, Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
    Didn't used to be this way before Lion/10.7.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • HT4623 how can i update my iphone 4 that does not have the update option in the settings?

    How can i update my iphone 4 that does not have the update option in the settings?

    From the article you linked, scroll down to the section "Update your device using iTunes"

  • Image capture does not recognize Canon Scanner

    I have two Canon Scanners, a Canoscan 8800F and a Canoscan LiDE 60. Image Capture does not recognize either of these. Both worked with Mountain Lion.

    This user found some success acutally using *older* drivers. While that sounds odd, it might be worth a try: https://discussions.apple.com/message/23759017#23759017
    I used to have a LIDE 60 - it is a great little machine. Good luck!

  • Image Capture does not recognize my Canon Pixma MP150 printer

    Image Capture does not recognize my Canon Pixma MP150 printer since I upgraded to Mavericks.

    To scan with Image Capture you need an ICA driver. Looking through the CanonDevices list in the /Library/Image Capture folder I cannot see an entry for the MP150. And I checked Canon Australia's web site and there is no ICA driver for the MP150. There is a scanner driver and MP Navigator for OS X 10.7. You may be able to install and use the driver and application on 10.9, although you will have to get past Gatekeeper to install both items as they are not digitally signed. To do this, you can hold down the Control key and click on the installer. A pop-up menu will appear and you can select Open. You will then be able to install the driver and then the application. If they do install then see if you can open MP Navigator and scan from the MP150.

  • TS1501 Image Capture does not launch when I connect my iPhone to my iMac and open iPhoto. No "Prefernces" is offered under Image Capture.  I cannot import photos to iPhoto.

    Can't import photos from iPhone to iPhoto.  Image Capture does not launch when iPhone is connected to my iMac and iPhoto is open.  There is no "Preferences" option offered to click when in Image Capture.

    This helped me. It is advice I found from a user named Carlosmara. First make sure iPhoto is closed and your iPhone is not connected. Then, as Carlosmara stated in his post,
    "Go to your Library/preferences and delete the file com.apple.iPhoto.plist
    IPhoto should recognized the iPhone again."
    The file in question is under your user folder.
    I then restarted my mac and plugged in the iPhone so that it would sync. After the sync, when I opened iPhoto, my iPhone was recognized and I could download the photos perfectly.
    Hopefully this will help you as it helped me

  • HT4623 My iPad does not have Software Update option??  How do I update to iOS5?

    My iPad does not have Software Update option?  How do I update to higher versions???

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 4: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you are updating using wifi, locate your iPad close to your router so you don't get a wifi dropout (can cause update corruption).
     Cheers, Tom

  • Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?

    Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?

    The update to iOS 5.0 & higher is an erase/restore deal, so make sure you follow the directions here to update your phone:
    http://support.apple.com/kb/ht4972
    iOS 7.0.4 will be installed.

  • I want to import bookmarks from Safari on the Mac same computer. Firefox help says Menu Bar/File/Import. My Firefox does not have File/Import option. How do I import bookmarks from Safari to Firefox?

    I want to import bookmarks from Safari on the same Mac computer. Firefox
    Help says use Menu Bar/File/Import.
    My Firefox does not have File/Import option.
    How do I import bookmarks from Safari to Firefox?

    Import and Backup is the third (last) button on the toolbar in the Bookmarks Manager (Library) that looks like a star.<br />
    Other platforms show the text label, but on Mac you only see toolbar icons.

  • My Envy 7645 does not have the grayscale option in advanced set up to print in black and white

    My Envy 7645 does not have the grayscale option in advanced set up to print in black and white

    Hi , Welcome to the HP Forums! I see that your HP Envy 7645 does not have the grayscale option in advanced set up to print in black and white, on Windows 7. I am happy to help!  It is possible, that you may only have the basic driver installed, instead of the full feature software and drivers. I would recommend to try our HP Print and Scan Doctor first, to see if ti can resolve the issue automatically. Otherwise, please try the following steps:  Uninstall the software. Uninstalling the Printer Software.Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Turn Windows Firewall on or off.Create a new user account. Managing User Accounts and Logins (Windows 7).Reinstall using the HP Printer Install Wizard for Windows. Hope this helps!  “Please click the Thumbs up icon below to thank me for responding.”

  • HT201263 my iphone5 does not have passcode setting option. this is for auto-lock function

    my iphone5 does not have passcode setting option. this is for auto-lock function

    Hello SLLH
    You can find the settings for the Passcode Lock in Settings > General > Passcode Lock. If you are looking for Auto-Lock, then go to Settings > General > Auto-Lock. If you are not seeing these options then you may need to do a reset settings on your iPhone, which is located at General > Settings >Reset > Reset All Settings.
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT201342 unable to change e mail address to new iCloud address. When following change instructions the drop down on the SEND NEW MESSAGES ON does not have the iCloud option.  ( I have mountain Lion)

    attemped instructions in Mountain Lion to change my e mail address to the recommended i cloud.com address.
    The drop down  in the SEND NEW MESSAGES FROM does not have the i cloud e mail option.
    How do I change it??

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.

  • HT201263 My itouch does not have an update option for the os

    I am trying to set up icloud and it says I must have 5.0 on my device bt the itouch does not have the software update option shown it the directions on the apple website.

    Connect to your syncing computer and start iTunes. From the summary screen, check for updates. If you have a 2nd generation iPod, it can not be upgraded beyond 4.2.1.

Maybe you are looking for

  • Error message when copying a sapquery

    hello, I am trying to copy query me80fn to zne80fn so that I can assign a changed infoset to it. I seklect the me80fn and press the copy button. I am copying the new query to the user group /sapquery/me. I get the message "Object can only be created

  • GL Account text mismatch! - Help. FS00/MX60

    We have a GL Account set up with a specific text in FS00, and this text is not the same as that being shown when we run the MX60 report. Please point us in the right direction to check where the report is pulling a different text for this GL account?

  • Chque no. in Assignment column

    Dear Friends, As per my client requirement I want to config. the cheque no. in assignment column while running the Automatic Payment and also processing the manual payment with same number range and it pick in number in assignment column of the docum

  • How do I delete large amounts of photos from my ipad?

    a

  • ITunes 7 attempting to sync all Podcast episodes regardless of selection

    I don't know if it's just me, but iTunes 7 seems to be ignoring which podcast episodes I have selected to sync and which I haven't, instead attempting to sync them all then erroring. I can get it to work if I only sync new episodes, but I like to kee