Image capture doesn't see the photos on my iTouch

I've got a 4th gneration iTouch with 6.0.1 and an iMac. The applications suggested by Apple for importing iTouch photos don't seem to see the photos (iPhoto and Image Capture). Any thoughts? Thanks!

@august1851 -- I had the same issue: took 84 photos on the iPod Touch but couldn't get ImageCapture.app or iPhoto.app to recognize that there were images on the device.
My solution was to (a) install Dropbox on the iPod, (b) log in to Dropbox using my existing account, and (c) telling Dropbox to sync photos from my iPod to my Dropbox account.
The entire upload process took about an hour, but now I have access to my photos!

Similar Messages

Iphoto & Image Capture doesn't see Iphone, Itunes Does?

Iphoto & Image Capture doesn't see Iphone, Itunes Does.
I am able to do everything as normal in itunes but cannot import photos using Image Capture(my prefered way to get my images) as it does not see my devise. Same for iphoto it doesn't see my iphone, please help.
Thank you

paulcb wrote:
It's generally recommended not to use a USB hub with the iPhone. I've used one with no problems but many have reported solving sync problems just by eliminating the hub and plugging directly into a USB2.0 port.
I'm sure.
The trouble is that there are too many bits of hardware that are recommended not to use a hub with. I have a PhoneValet (which won't work at all with a hub) and a set of first generation Harman-Kardon speakers (ditto). Then I need a USB port to plug the hub itself into, and that's my three USB ports used up.
Martin

Since upgrading to the new firefox, pictures on facebook do not load automatically. I have to click on the frame and select view image in order to see the photos. Do you have a solution to make the photos autoload?

Since upgrading to the new firefox, pictures on facebook do not load automatically. I have to click on the frame and select view image in order to see the photos. Do you have a solution to make the photos autoload?

https://support.mozilla.com/en-US/questions/891839

IPhoto and Image Capture does not see the iPhone as a camera

Whether I launch iPhoto or Image Capture, in both cases the iPhone is not recognized as a camera. I am running firmware 1.1.1. I am afraid up upgrade to 1.1.3 because I do not want to lose my pictures. This was working at one point, but now it is not. I have no problems syncing music and video content within iTunes. I recently used migration assistant to move my home folder to my new Mac Pro running leopard. I am not sure if this is when it stopped working. I also tried using the Tiger machine at work, but the same thing happens there as well in both apps. Is there anything anyone can suggest?

This helped me. It is advice I found from a user named Carlosmara. First make sure iPhoto is closed and your iPhone is not connected. Then, as Carlosmara stated in his post,
"Go to your Library/preferences and delete the file com.apple.iPhoto.plist
IPhoto should recognized the iPhone again."
The file in question is under your user folder.
I then restarted my mac and plugged in the iPhone so that it would sync. After the sync, when I opened iPhoto, my iPhone was recognized and I could download the photos perfectly.
Hopefully this will help you as it helped me

Image Capture doesn't see or download my photos taken since update to iOS4

Hi!
I updated my iPhone 3GS to iOS4 a couple of days ago. Since then, Image Capture stopped seeing (and therefore can't download either!) the photos I've been taking, which are stored in my camera roll. It can still see those taken before the update.
Any idea...?
Help would be much appreciated!

@august1851 -- I had the same issue: took 84 photos on the iPod Touch but couldn't get ImageCapture.app or iPhoto.app to recognize that there were images on the device.
My solution was to (a) install Dropbox on the iPod, (b) log in to Dropbox using my existing account, and (c) telling Dropbox to sync photos from my iPod to my Dropbox account.
The entire upload process took about an hour, but now I have access to my photos!

Image Capture doesn't see my printer/scanner

iMac 27 / OSX 10.9 (Tried updating and there aren't any available) / HP 6500 e709a printer all-in-one 9USB connected)
I went to scan something this evening, clicked Image Capture and it open but didn't show any devices or option to add one. System preferences sees the device pius an additional printer I have connected. They both print or at least did. It was suggested that I delete the 6500 and re-add it. When I do that it says there isn't any software available at this time. Ugh!
Any thoughts? Thank you, CJOB

Install drivers from this link:
HP_Lion_Ink_SW_v12.13.2.dmg
Then one labelled HP from Apple:
HP
If that doesn't work, look at Image Capture's preferences and enable TWAIN.
If that doesn't work, try
Vuescan
Silverfast
these scanners available to the Mac using SANE drivers from open source SANE developers

After Udateing to IOS 5 my Windows Explorer doesn't see the photo folder on my iPhone

I use my iPhone at work to take pictures and upload grab them off the phone folder. I can charge my phone using the USB connection But I'm not allowed to install iTunes on my work computer and I do not wish to use iCloud at this time. Now that I've upgraded to IOS 5 Windows explorer doesn't see a folder for photots?! How can I restore the ability to grab photo's off my phone using the Windows explorer?

I can't see Calendars list (iPad-1)
...invitations/download button on the lower right.
where this buton?
Lower right. The downward arrow pointing into the horizontal brackt that looks like
this on its side: ]

Image Capture can't see scanner

I upgraded to Mountain Lion and while the printer function of my Canon MP 180 is working, the scanner is not working now. Image Capture doesn't see the scanner. Following advice on this forum, I deleted the printer in system preferences > print&scan and the reinstalled it a few times. I also downloaded the 2 available (but old) drivers from Canon. Still nothing works. Can anyone help?

Canon Australia is hosting a scanner driver for 10.8 and MP Navigator v3.0.5 for your MP180. Install the scanner driver first and then MP Navigator.
Note that Canon is not hosting an ICA driver for this model, which is used by Image Capture and Preview. So this would explain the lack of the scanner entry in the KB article that Clinton has mentioned (the vendors make the drivers - Apple just hosts them).

I have prepared a book on iPhoto, ready to buy book. There is amessage above about half the pages that says "drag photo to place in background" as if it doesn't see the picture there. Its a MAC 08X 10.6.8 and iPhoto '08 7.1.5. I have made iBooks before b

I have prepared an 82 page book on iPhoto, ready to buy. There is a message over about half the photos saying "drag photo to place in background" as if it doesn't see the photo already there. I have spent over 20 hours getting to this point and can't bear to start over! Its a Mac 08X 10.6.8 and iPhoto 08 7.1.5. I have made other iBooks on this software and computer with no problems. Help please!

Look for a page that has a similar layout:
The one photo per page layout is the easiest to miss. Just click on a background color to remove the problem.
OT

Image Capture doesn't recognize my Built-in iSight Camera

I'm trying to use Image Capture but when I open the application is shows the following message:
"No scanner or camera connected".
It's supposed the camera is connected because I'm also using Skype video call (not at the same time I'm trying to use Image Capture) and there's no problem with it.
Image Capture was working perfectly couple months ago, now it isn't.
Does somebody know what the problem might be?
Thanks for your comments and opinions.
Sebastian.

image capture doesn't use the isight, it's for other digital cameras & scanners. use the screen capture ability. hold, command shift, press 4 & tap spacebar to see a camera icon. click on an open / active window when it's lighted in blue, click the mouse. saves the pic as a png on your desktop.

IPhoto doesn't see new photos in iPhone

Trying to import new photos from my iPhone. iPhoto doesn't see them. I tried quitting both things, but still doesn't see them - now what?
Using iPhoto 9 - version 8.1.2
iPhone version 3.1.3

Computer sees the iphone, it just doesn't see the photos. This happened once before and I spent more than an hour with tech support fixing it - a real pain..... I'm hoping there is a quicker fix.

Image Capture doesn't recognize my Canon device camera (it has before). I made a copy of the Image Capture app by mistake. What do I do?

My Macbook doesn't have iPhoto installed. ?? I don't know why, because it used to be installed.
I have been able to download photos from my camera using Image Capture, but now Image Capture doesn't show my camera in the Devices window. It did yesterday.
Ideally, I would like to install iPhoto again, but how do I do it without having to purchase the app again?
This might also be relevant:
I wanted to add an Image Capture icon to my dock, but I inadvertently made a copy of the app (called Image Capture copy). When I tried to erase the copy, I couldn't. Image Capture copy is in my Trash and the Image Capture app is in my Applications folder. I tried opening the app from both the Trash version and the app version, but it doesn't help.
Please help!
Sue

Use the disks that came with your Mac to do a custom install of the software you need, i.e. iPhoto. The disk should look like #4 in this screenshot:

Image Capture doesn't recogonize camera

Up until today, iPhoto 2.01 would automatically see and import photos from my Nikon CoolPix 4800. After trying all the iPhoto fixes, rebuild library, removing preferences, etc. I even used a new interface cable, and different USB ports, but nothing. I then tried Image Capture 2.1.0 (v183) and it doesn't see the camera. This leads me to believe it's the camera, however I can connect the camera to a TV with an audio/video cable and see the photos.

Thomas:
Welcome to the Apple Discussions. Some cameras have two selectable protocols for conntecting to other devices. I don't remember what they are called but check the menu's in the camera or, heaven forbid the manual-but don't let anyone see you reading it, to see if your camera has that option. If so then change to the the other one and see if that won't fix it.
Also, with the camera connected open the System Profiler (select About this Mac in the Apple menu and click the More Info button) and see it it can recognize the camera in the USB section.
OT

After updating iPhoto to 9.2 Photoshop CS2 doesn't display the photo I have opened. The photo shows in the Navigator on the side panel, but not on the screen. MFF

After updating iPhoto to 9.2, Photoshop CS2 doesn't display the photo on the desktop screen, even though the image is shown in the Navigator pallet well to the right.

No, that is the problem. I don't see how it should be, but that is what happened after I did the upgrade, which was for iPhoto 9.2. The upgrade then required that the Library be upgraded. Then CS2 stopped showing the photo when I opened CS2. Maybe there was a system upgrade for the whole system, that went along with 9.2. Before the upgrade CS2 worked. I even tried photos that I had on backup disks, and they wouldn't show in CS2 even though I had draged them to the PS icon in the dock. These photos were not on my computer when the Library was upgraded. I even tried photos fresh from the camera. Elements 9 does work to open the photos.

Image capture doesn't recognize iphone

OS X 10.7.4, iphoto 11, iphone 4, ios 5.xx
-I have photos on iphone that are not in photo stream, and videos as well, that I want to download
-image capture does not recognize the iphone as a device when I launch it. It does not autostart even though I set the IMAGECAPTURE option in iPhoto preferences
-itunes does see the phone
-iphoto does not see the phone and does not have the missing images - I cannot manually import anything from any device
-Activity monitor shows a new copy of ptpcamera each time I plug in the iPhone to the USB cable
-restarting iPhone/iTUnes/iPhoto/Mac have no effect
Something changed with the latest iPhoto/iTunes combination

Found the resolution in another thread. Have to go to iPhoto preferences and set Image Capture to open when a camera is plugged in. Then it should auto start.

Image capture doesn't see the photos on my iTouch

Similar Messages

Maybe you are looking for