Image Capture duplicated photos with iOS 8.1

Image Capture is displaying duplicated or even Triplicated photos when connecting an iPhone with iOS 8.1.
The photos on the iPhone are fine. I am using Mavericks.
Thank you.

I reinstalled iOS 8.1 on my iPhone using iTunes (restore), and the problem is solved.

Similar Messages

  • Image capture not work with ios5

    Image capture/iphoto couldn't recognize my iphone4 after update it to ios5.

    I WAS having the same problem. With the introduction of photo stream, Apple currently is not allowing you to use the photo stream option concurrently with the manual import option with Image Capture. You have to choose one. My situation was that I had old picture on my iphone which were not being streamed and I hate using iPhoto.
    This is what you have to do to use Image Capture on Mac... again...
    1. Disable photo stream on your iphone
    2. Connect iphone to mac
    3. Open image capture
    4. Your iPhone will show up under devices and proceed normally
    5. Voila!
    Rationale: Like I said, since Apple does not give you the option to use both features (manual import via Image Capture or photo stream) you have to choose one, and by disabling photo stream on iphone, it lets you import images via Image Capture as you would normally.
    You can use Keaggy's method, but I hate iPhoto. iPhoto does not let you choose your own directory which is annoying.
    So those who want to go back to your regular ways, use the method above.
    Message was edited by: schandi

  • The Mystery of the Duplicating Photos with Varying resolutions and Sizes by Sony Z1 Compact

    about the duplicating photos with varying resolutions and Sizes problem... I have a band-aid fix to this without deleting everything in your  phone. What you do is to find time to actually MANUALLY DELETE the extra photos. Don't delete it by Taping on the Album app and deleting everything on the home photos.
    Instead tap the album then on the UPPER LEFT CORNER (If you've updated the albums) tap the 3 bars beside the album icon to access the album menu, then tap the FOLDERS choice.
    You should see alot of folders with Thumbnails named with numbers and different resolutions. Delete all the folders labeled as Thumbnails or cache. *note that you cannot delete whole folders but the folder gets deleted automatically after all the contents inside it is deleted
    Afterwards, go to your phone's settings->App-> Album
    Then tap the Clear Data button
    After that restart your phone.
    This actually "fixes" the problem for a while but usually after a few restarts or Phone charge the folders comeback and you have to redo the whole process again. But the folders that are made becomes fewer than the 1st occurrence of this problem and deleting the photos shouldn't take as long as the 1st.
    Honestly i think this is definitely an Application bug and should be fixed by Sony, since you know its their built in app for Multimedia

    yea that also helps since it's a bug caused by the new update. I'm just waiting for Sony to fix the bug, i don't really mind deleting the thumbnails

  • Image Capture and photo/video syncing

    Whenever I connect the 3GS to my desktop for syncing, the Image Capture application opens up on my
    desktop and wants me to download the photos/videos I have taken with my iPhone camera..I have
    already downloaded them more than a few times, but the Image Capture application continues to
    open up..how do I stop that application and have only iPhoto open up when I want to sync photos??
    Thank you

    Open the iPhoto or Image Capture preferences and set them not to open when a camera is connected to the computer.
    (44897)

  • Image Capture not working with Canon LiDE 500F

    Image Capture version 6.0.424 and CanoScan LiDE 500F 11.2.5.0 does not work properly.
    Regardless the resolution, the resulted file has a very small size.
    As a test I scanned a 9x20cm document at different resolutions and for all resulted files 'Get Info' reported small dimensions: 69x147 pixels. It is interesting that the size of the file varies with resolution, but when opened in Preview or Acrobat Reader, the small size is used.
    As for other reports, CanoScan Toolbox works properly.
    Regards,
    Liviu

    Hello Liviu,
    There has been a couple of posts regarding the same issue with Image Capture. Have a look at this one for example.
    http://discussions.apple.com/watches!add.jspa?forumID=1344&threadID=2272250
    As I stated in this thread, I do not have this problem with Image Capture and my LiDE 200 or my MP980 AIO. So there must be something with the drivers used by these older model of Canon scanners when using Image Capture.
    I haven't seen anyone provide a solution as yet so you may need to escalate this to Canon if you have a need to use Image Capture.
    Pahu

  • Using Image Capture to scan with Canon Pixma MX700

    I previously had trouble connecting my Canon Pixma MX700 to my MBP, but soon figured out that I needed a new high speed USB 2.0 cable, versus the old one I was trying to use it with. Doh!
    So now it prints without any trouble at all, and I know that all its features - printing, scanning, fax, copier, are supposed to be compatible with Leopard.
    However, I'm still having issues scanning. I Googled and found a comment somewhere that with this specific model, one has to use Image Capture for the scanning portion, instead of the Canon software.
    Great, so that explained the problem I was having trying to figure out how to GET it to communicate at all with the MBP (downloaded the latest scanner driver from Canon with no result).
    But it still will not scan with Image Capture. Communication is fine- the image is detected and I can see it perfectly in the Image Capture window, am able to change options, etc. Once I drag and select the image I want to scan and click the scan button, nothing happens. Or more specifically, the button will be click-able and for about two seconds it appears to be working (with the scan button substituted by a cancel button), but then the scan button will pop back up and nothing appears in the folder I specified the image to be saved to.
    Now I'm completely stumped. What am I doing wrong?
    Thanks!!!

    With my MacBook running Leopard, I had been able to successfully scan multiple images by pressing the MX7000 scan button and capturing the images with MP Navigator. The MX700 is networked over WiFi. Early on, I learned that it seemed to be more reliable to drive this process using the scan button, rather than trying to initiate the scan from the MP Navigator UI.
    However, recently things stopped working, and after the first image was scanned, subsequent scans would fail, with MP Navigator complaining about not being able to connect to the scanner. This sounds similar to the problem described in the original posting.
    I went to the Canon USA support site and downloaded /installed the latest versions of the MX700 scan driver (13.9.0) and MP Navigator (1.0.4), both available under the "Drivers and Downloads" section for the MX700 support page (be sure to select "Mac OS X" from the pull-down menu).
    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDeta ilTabAct&fcategoryid=238&modelid=15651#DownloadDetailAct
    The new updates seem to have solved the problem, and I can now scan multiple images one after the other. Again, I always initiate the scan from the button on the MX700, and always capture using MP Navigator, which has the really nice feature for creating and editing multi-page PDFs.
    Message was edited by: donbondio

  • Image Capture not working with 10.6.6

    I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem. Despite conversations with a helpful Canon engineer they seemed unable to offer a solution. However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
    I can still scan by using the printer dialogue box but it is very long-winded and not very satisfactory. Is there any hope of me being able to use Image Capture again with my scanner?

    fordwich wrote:
    I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem.
    The MP Navigator application requires the [Canon MP780 scanner driver|http://support-au.canon.com.au/contents/AU/EN/0900205301.html] to be installed. The Canon driver update from Apple does not include this full scanner driver, only a mini driver that lets you use the scanner via Image Capture/Preview.
    However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
    The mini driver mentioned above is known as an ICA driver. Canon provides this package to Apple for software download and also has it for various models on their web site. Checking the Canon Australia web site, the MP780 does not list the ICA driver. And checking the Canon IJSCanner1 package located in Library > Image Capture > Devices, which is where this information gets copied to, the MP780 is not in the devices list. So this confirms what Apple has listed on the web but makes no sense how you were able to scan on 10.6.5 or how you are still scanning now via the Print & Fax section, which uses the ICA driver. I would not think that the .6 update would remove the MP780 from the device plist. I need to check a previous build when I get back to the office.
    But in the meantime if you can still use the MP780 in Print & Fax then this is the same as what you get in Image Capture. If you click the Show Details tab in the scanner preview window then this may be what you were used to with Image Capture.
    And I believe that if you install the full scanner driver then you will be able to use [MP Navigator v2.0.8|http://support-au.canon.com.au/contents/AU/EN/0900182001.html].

  • Image Capture stopped working with Lexmark Pro915.

    I use an imac (Late 2006) 2.16 GHz Intel Core 2 Duo. Mac OS X Lion 10.7.5 (11G63).  I use Image Capture to scan from a Lexmark Pro915 to my computer. I recently updated Image Capture to latest version and ever since when I try to scan to my printer I get the following dialogue box:
    Choosing your scan profile
    Follow the instructions to finish the scan job:
    1. Load the original document into the ADF or on the scanner glass.
    2. From the printer home screen, touch Scan > Scan Profile.
    3. Select "your computer name" to begin your scan.
    To cancel the scan job, click Abort.
    I contacted Lexmark customer support (from whom I downloaded the latest Image Capture Update), and they want to charge $119 to fix the issue, which they say is due to a missing file.
    Can anyone help please?

    Hi John!
    I have an article here for you that can help you troubleshoot this issue with your printer/scanner:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    You may also need to look for the most up-to-date software for your printer/scanner using the following article:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Image Capture Lost Photos

    Well, the Photos app says 'Restoring...' and it has for four hours.
    I used Image Capture, like I have a million times, I selected the photos I wished to upload, up until the photos from last week, which we're of a very important trip. All the photos I selected, uploaded - I think - but here's the tricky part. The photos I didn't select, dissapeared from my phone completey. The albums are still there, and there are a few blank video files in each one, but my photos are gone.
    I didn't even select them, or anything.
    Please be gentle, but I asking, is there ANYTHING I can do, to find my photos. I didn't delete them, I didn't even touch them. They're gone. I'll pay, jailbreak, do whatever I have to do.
    The last few days documented, were beyond important photos. A trip I'll probably never be able to take again.
    Any help, is MUCH appreacited, and no, I did not backup.
    Again, please be gentle.

    A similar thing happened to me while using a Canon Rebel XSi. I used Image Capture to port straight to iphoto while clearing out the camera, Image Capture processed all the photos and removed them the camera, then iPhoto opened and began importing but it only imported about 20 photos ( of the 150 or so that I imported ).
    I can't find the images on the hard drive anywhere. It seems like Image Capture doesn't make sure the file is saved to the drive anywhere before it deletes it from the camera.
    I was pretty bummed to lose all my photos like that.

  • Camera to capture ID Photos with Live View tethering and Inexpensive.

    Need suggestions for a relatively cheap webcam or point and shoot camera I can hook to the MBP and control it with live view functionality. Needs to be able to take a stills suitable for ID Photos for a printed conference ID. It would be nice to be able to crop the image before saving it. This image file will be dragged into a FMP image box and the ID printer vis FMP. iSight is too low rez and can't be flipped over to capture away from the keyboard.

    some in http://www.mac-compatible-web-cam.com should be able to meet your needs for cropping (zoom.)
    A Mac compatible tape based, Firewire connected, miniDV or HiDef camcorder would be ideal and would not require any software beyond what comes with your OS X Mavericks (10.9.)

  • Sharing photos with iOS 6 via email

    Hi
    When trying to sent pictures from photos can select pics, then email appears with photos attached and when send there is a sent sound but mail is not received and also does not appear in sent folder. Even trying other email addresses for example gmail instead of iCloud results are the same
    Is there a fix for this? The problem appeared since iOS 6

    Open either or both the Mail app or Photos app and try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank. Be patient, the device will power ON again in the normal way. It is app and data safe!]

  • Photogene App crashes with some photos with iOS 8 update, not others when in edit

    SInce the iOS 8 update some when I select a photograph or when scrolling pictures in an Album, the App crashes.  This never happened before this new upgrade.  I've used it for months.  Any help appreciate.  With certain pictures, no problem.  I make personal cards for printing and this app has been great until now.  I go into one album, scroll, select a photograph p, work in it, no proble.  I move to another Album, and whil scrolling it crashes, repeatedly..  This app replaced the iPhoto App as that one was multiplying pictures like rabbits and alleged fixes and visits to the Apple Store did not solve the problem.  The Appke Store personnell were great but no one could fix that issue.  I deleted it.  Many, many others everywhere had that similar problem.  Any help with this crashing problem is appreciated. 

    Thank you, Ralph,  for your reply.  I'm a practical person so I tried trial and error.  It was recents ans larger Albums that the Photogene crashed.  I could make a card from my smaller Albums.  So I transferred a few photos from the ones that crashed to the successful Album(s).  I could edit, put Text, save, export to my library, e-mail and post on FaceBoo.  That worked for me.  A round about way, but it works.  Again, thanks.
    Dan

  • Some Photos with iOS 7 black or white screen

    Since I've downloaded the new iOS 7 several weeks ago, some of my photos using Apple's pre-installed camera app or other camera apps all totally white or black. While they appear fine in the thumbnail, when you go to view the full photo it's entirely black or white. This only occurs for some photos. I noticing this mainly with my iPhone 4S. Any suggestion to resolve?
    Thanks.

    Hi kclh87,
    It looks as if you have turned on one of the Accessibility features - Grayscale. To turn it off, go to Settings > General > Accessibility > Grayscale and slide the switch to the right. See this manual -
    iPhone User Guide
    Page 151 contains the information.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Image capture and send with post

    Ok, like the title suggests, I have a lil paint function
    drawing on a canvas in flex 2. What I need is to get that image all
    captured and bundled up to send to asp.net VB. The site is here:
    we are UNLIMITED .com Click on
    start, then Draw, and you will get to play with that canvas. You
    can draw all day, different brush sizes, colors, and erase. I need
    a capture button there to get the image off the canvas into BYTE
    format. Mainly what i need help on is sending that byte array from
    flex to asp.net VB, and REALLY need help on catching that byte
    array in asp.net VB and getting it to the point i save save it to
    the server HDD via the file I/O. I have already been able to save
    XML docs to the HDD with asp.net VB to be read by flex via the file
    I/O. I really just need some asp.net vb code to do the "POST" catch
    (or request), and get the image to PNG? format to be saved. This is
    going to be a small paint program in flex, members can use to
    create their avatar. I will be implementing say a crop, copy/paste,
    drag and drop, resize and what not, to give my users more
    flexability as far as what their image looks like. I'd really like
    it to be as close to a basic "windows paint" program. But that's
    another story. For some reason every time I look up passing
    variables from flex (flash) to asp.net vb, it's POSTing form vars,
    and really none of it has dealings with images. I know it's
    probably really the same, but like I was trying to say, I just get
    all kinds of confused with working with byte arrays and asp.net vb
    and flex. I was actually supposed to have this site up and running
    this past Aug, but with the swap to flex, the pains of membership
    between flex and asp.net vb, and my general newbie beginnings of
    this whole aspect of computers. Let's just say it's taken a bit
    longer than expected.
    So to recap from all my babbling:
    I need to:
    (flex)
    Capture the image on that canvas (see link)
    load to asp.net VB (pref. using POST)
    (asp.net VB)
    create an asp.net vb page to receive/request that image
    reformat that image ( pref. PNG )
    save the formatted image to the server HDD
    This should be fairly simple, and I'm almost embarrassed to
    ask for help. I've just been trying to work through this muck for
    way too long, and I really need to get past this.
    code snippets would be great, although just some good
    resources to look at would be great too. I do entirely appreciate
    any help in this matter.
    Daniel Keeney
    WebMaster
    we are UNLIMITED .com

    You've probably already worked this one out but I thought I
    would post my solution - not elegant but it works
    I spent two days trying to find an asp.net solution in VB.net
    to no avail so here goes:
    Actionscript:
    var bitMD:BitmapData = new BitmapData(this.width,this.height)
    bitMD.draw(this);
    var _PNG:ByteArray = PNGEncoder.encode(bitMD);
    var U:URLRequest = new URLRequest
    U.method = URLRequestMethod.POST
    U.data = _PNG;
    U.contentType="application/octet-stream";
    U.url = "
    http://localhost/CARTO/image.aspx";
    var UR:URLLoader = new URLLoader
    UR.dataFormat = URLLoaderDataFormat.TEXT
    UR.load(U);
    ASP.NET
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As
    System.EventArgs) Handles Me.Load
    Dim b() As Byte = Request.BinaryRead(Request.TotalBytes)
    Dim ms As MemoryStream = New MemoryStream(b)
    Dim img As System.Drawing.Image = Bitmap.FromStream(ms)
    Dim bmp As Bitmap = New Bitmap(img)
    Dim tempStream As New MemoryStream()
    bmp.Save(tempStream, System.Drawing.Imaging.ImageFormat.Png)
    Dim fs As New
    FileStream(System.Web.HttpContext.Current.Server.MapPath("test.png"),
    FileMode.Create)
    tempStream.WriteTo(fs)
    tempStream.Close()
    fs.Close()
    End Sub

  • RAW files in Photos with iOS 8

    Has anyone found a solution to the way iOS 8 has slowed down the rendering of RAW files in Photos? This used to be one of the main ways in which I used my iPad and on photo shoots it was very impressive. Now I cannot use it to any effect. I've tried rebooting the iPad and closing apps, and while this initially improved it a bit, it is still not smooth as it was before iOS 8.

    The documentation for Photos does not explain at all, how RAW files are rendered in Photos.
    In iOS 7 it was documented, that RAW files were not rendered at all. iPhoto and Photos simply edited the embedded JPEG from the RAW file. And I strongly suspect, that that is still what happens. Have you changed the settings in your camera to a different RAW compression and are now using a different RAW format than previously?

Maybe you are looking for