Image capture NOT THERE!

Image capture has been recommended in this forum for downloading videos from my Digital camera. Alas, it´s not there! I have installed Mac OS X 10.4.5. Can anyone help?

It should be in your Applications folder, unless you moved it elsewhere like a subfolder.

Similar Messages

Image capture not working in lion

Well! After 10 years or so of OS X my Kodak DC 5000 no longer works in image capture after upgrading to OS X Lion. After connecting the camera and trying to import images, Image Capture says "no device connected".
Went to the loca shop and using the same camera and cable, successfully imported picts to the desktop under Snow lepard, so I know it's not the camera or cable. Been a mac user for decades! never had a problem with "plug and play" until this update!
Do I need to get a card reader now? New camera? Not happening as long as this one works(ed). Already lost Photoshop, but didn't mind as I bought Pixelmator. However, the Image Capture not working is a showstopper. Is this Apple's version of Vista? Help please!

Yes, I have iPhoto 9.1.5, I also used the prefs and this still is not working. The upgrade to OS X Lion broke my driver and I am not able to do transfer any pics from the camera.
I assume I will now need to buy a card reader.

Image capture not recognizing itouch

image capture not recognizing itouch. it did once until i rebooted

Eject, disconnect and then reconnect the iTouch to your iMac.
Dennis

Image Capture not working with Canon LiDE 500F

Image Capture version 6.0.424 and CanoScan LiDE 500F 11.2.5.0 does not work properly.
Regardless the resolution, the resulted file has a very small size.
As a test I scanned a 9x20cm document at different resolutions and for all resulted files 'Get Info' reported small dimensions: 69x147 pixels. It is interesting that the size of the file varies with resolution, but when opened in Preview or Acrobat Reader, the small size is used.
As for other reports, CanoScan Toolbox works properly.
Regards,
Liviu

Hello Liviu,
There has been a couple of posts regarding the same issue with Image Capture. Have a look at this one for example.
http://discussions.apple.com/watches!add.jspa?forumID=1344&threadID=2272250
As I stated in this thread, I do not have this problem with Image Capture and my LiDE 200 or my MP980 AIO. So there must be something with the drivers used by these older model of Canon scanners when using Image Capture.
I haven't seen anyone provide a solution as yet so you may need to escalate this to Canon if you have a need to use Image Capture.
Pahu

Image Capture not finding images taken under iOS 4

After updating to iOS4 I'm not able to download images from my phone via Image Capture. Image Capture simply doesn't show the images taken since the update, in the browse window of the application.
So my question, with a conditioned subquestion is:
-> is there a fix for this issue?
->->if not: does anyone know of another way to get images and videos from the iPhone without going trough iPhoto.

Found the solution. For Lion, you need to install the Canon driver for Snow Lep 10.6 then reboot. Once that is complete, the scanner will show up as a valid device.

Image Capture not working with 10.6.6

I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem. Despite conversations with a helpful Canon engineer they seemed unable to offer a solution. However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
I can still scan by using the printer dialogue box but it is very long-winded and not very satisfactory. Is there any hope of me being able to use Image Capture again with my scanner?

fordwich wrote:
I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem.
The MP Navigator application requires the [Canon MP780 scanner driver|http://support-au.canon.com.au/contents/AU/EN/0900205301.html] to be installed. The Canon driver update from Apple does not include this full scanner driver, only a mini driver that lets you use the scanner via Image Capture/Preview.
However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
The mini driver mentioned above is known as an ICA driver. Canon provides this package to Apple for software download and also has it for various models on their web site. Checking the Canon Australia web site, the MP780 does not list the ICA driver. And checking the Canon IJSCanner1 package located in Library > Image Capture > Devices, which is where this information gets copied to, the MP780 is not in the devices list. So this confirms what Apple has listed on the web but makes no sense how you were able to scan on 10.6.5 or how you are still scanning now via the Print & Fax section, which uses the ICA driver. I would not think that the .6 update would remove the MP780 from the device plist. I need to check a previous build when I get back to the office.
But in the meantime if you can still use the MP780 in Print & Fax then this is the same as what you get in Image Capture. If you click the Show Details tab in the scanner preview window then this may be what you were used to with Image Capture.
And I believe that if you install the full scanner driver then you will be able to use [MP Navigator v2.0.8|http://support-au.canon.com.au/contents/AU/EN/0900182001.html].

Iphoto and image capture not recognizing kodak camera

Hello!
I am having trouble uploading photos from my Kodak easyshare dx4530 to iphoto 6.0.5. This is a new thing as I have uploaded many times before. The camera is not recognized by iphoto or by image capture when the usb is connected. The camera and usb work fine when connected to my husband's ibook G4.
I tried moving the preferences to the trash (com.apple.iphoto.plist and com.apple.imagecaptureapp.plist) and this did not work. There is only 1 account on the computer and it is the admin account.
Thanks in advance for any help offered.

pb35:
Welcome to the Apple Discussions. Is the camera recognized by System Profiler? Did you run any updates before this problem began? A first cut would be a reinstall of the 10.4.9 COMBO updater followed by a permissions repair.
I'd create a second, non-admin, very vanilla account and see if the camera is recognized there by iPhoto or IC. A second plain account is a very good troubleshooting tool to see if the problem is with what's been added to the primary account.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Why does Image Capture not see my scanners?

I have two multi-function printers - a Canon MF4350d and a HP Officejet J4550 - both connected to my iMac and both printing properly. But when
I open Image Capture it does not see either device. How do I get my scanners functional?

Check this thread: https://discussions.apple.com/thread/5540452?start=0&tstart=0
It would seem there are updated drivers for (some) HP scanners. Doesn't appear to be the case for Canon.

Preview and Image Capture Not Recognising Scanner

Preview and Image capture have stopped recognising my networked Canon MX350 scanner. It seemed to occur after I used PhotoScore to scan some sheet music but that could be coincidence. I deleted the scanner driver and reinstalled it from the Canon website together with the MP Navigator software, and I am now able to scan from MP Navigator but not Image Capture or Preview. I have run Software Update but no updates are available.

Apple's official documentation only provides an information about printing by using this device - scanner is not listed. I would suggest to look for specific drivers on Canon's official webpage.
OS X: Printer and scanner software available for download - Apple Support

Everything correct, but the images are not there

Ok, with the podcast I do, All Things Gaming throught www.upstatefighting.com, I went throught and added the album art for the cast in the feed that we use. I checked in the store, and the image shows up. But when I resubscribe to the podcast, the album art does not show up in my iTunes browser. When I check the file info for a podcast, the album art is not there. Do I have to embed the file in the music file before uploading, or do I just used the url for the image and it auto embeds when the podcast is uploaded.
I did check the forums here for any similar problem one might have, but nothing seemed to fit what I was dealing with.

XelNaga wrote:
Will that also take care of the image that is listed under the title of the podcast?
Not sure whether you're referring to the Store or subscribing, which are quite different. On the Store page the image is referenced in the feed, in the 'itunes:image' tag. When subscribing, the image which appears at bottom left is embedded in the episode, so it can be different depending on which episode is selected: if you have 'grid view' selected the image which appears in the top section is that embedded in the top episode.

Image capture not work with ios5

Image capture/iphoto couldn't recognize my iphone4 after update it to ios5.

I WAS having the same problem. With the introduction of photo stream, Apple currently is not allowing you to use the photo stream option concurrently with the manual import option with Image Capture. You have to choose one. My situation was that I had old picture on my iphone which were not being streamed and I hate using iPhoto.
This is what you have to do to use Image Capture on Mac... again...
1. Disable photo stream on your iphone
2. Connect iphone to mac
3. Open image capture
4. Your iPhone will show up under devices and proceed normally
5. Voila!
Rationale: Like I said, since Apple does not give you the option to use both features (manual import via Image Capture or photo stream) you have to choose one, and by disabling photo stream on iphone, it lets you import images via Image Capture as you would normally.
You can use Keaggy's method, but I hate iPhoto. iPhoto does not let you choose your own directory which is annoying.
So those who want to go back to your regular ways, use the method above.
Message was edited by: schandi

Image Capture not working anymore

I use Image Capture to get photos off my Canon XSi. Lately, it hasn't been working. Image Capture shows 26 CR2 icons (without the camera even being plugged in), but won't show their thumbnail previews. It won't download them, and I can't delete them, either. It also won't recognize any new photos I've taken with the camera when it is plugged in. The only thing I've done recently that might have caused this is I installed a new scanner (Epson V300). I've tried deleting the Epson scanner driver, deleting Image Capture's preferences, and even deleting Image Capture and reinstalling it using Pacifist. The 26 ghost icons still haunt me. Furthermore, I still have device windows for the Epson scanner (two of them, for some reason) even though I uninstalled all the Epson stuff. Any other ideas?

Yes, I have iPhoto 9.1.5, I also used the prefs and this still is not working. The upgrade to OS X Lion broke my driver and I am not able to do transfer any pics from the camera.
I assume I will now need to buy a card reader.

Updating the camera's clock with "Image Capture" not working

In Mac OS X 10.4 I used the application "Image Capture" to synchronise the camera’s clock with the clock of my Mac.
Since updating to Mac OS X 10.5 this feature isn’t working anymore. I still get the option in the options panel for the camera, but the time isn’t updated.
The camera is correctly set up, as it still works with my Mac OS X 10.4 iBook.
Is this a problem with my Mac or is this a bug in Mac OS X 10.5?
Is there a way to fix this problem?

What camera? I have had the same problem with a Nikon D70. Nikon Transfer has the same feature, and I can't get it to work on Leopard either.

Image Capture not detecting Scanner over Network

I have an Epson Workforce 610 which is installed as a network printer (wired ethernet) in my Home Office. OSX Mavericks will find and load the ppropriate drivers for the printer, and printing is fine. However Image Capture does not show the scanner portion in its window. Devices read as (0).
If I connect via USB cable the Scanner shows up with no problem. Disconnect USB no scanner.
Has anyone got a workforce 610 successfully scanning over ethernet?
Thank,
Douglas McLean

DougMcLean wrote:
The problem occurs when trying to use it via the network connection, at which point the printer shows up only as a printer. and can't be "added" as a scanner.
Doug
On the network computer, does System Preferences save it as a Shared Printer?
The reason I ask is that I can't.
I can select and save as follows:
But when I re-open System Preferences, the system has de-selected it:

Why does image capture not recognise mac camera

When i go onto image capture, it says there are no camera's or scanners. How do I find the original camera that came with the mac (there is definitely a camera on the mac)? Is this possible?

Image capture is for importing/copying images off a camera memory card or from a scanner. It doesn't activate the built in camera. For that open Photo Booth.

Image capture NOT THERE!

Similar Messages

Maybe you are looking for