Image Capture shuts down scanner after every scan

Image capture could speed up the process of scanning old photos, but it insists on shutting down the Epson V100 scanner immediately after scanning. Have searched for a solution here and elsewhere; am I missing something to adjust the settings? This should be very easy, but I can not get it to work.
There are no control panel settings.
There is no preference panel for Image Capture.
There is no update for the scanner driver.
Epson scan will only scan one photo at a time, so it does not help.
Any suggestions?

Apple's official documentation only provides an information about printing by using this device - scanner is not listed. I would suggest to look for specific drivers on Canon's official webpage.
OS X: Printer and scanner software available for download - Apple Support

Similar Messages

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • Final Cut Express Shuts down right after capturing

    Hello all:
    I am using FCE 3.5. I have used this for about a year now and I have developed a problem with FCE shutting down right after I hit escape. I run a lab for a university and it is doing it on ALL of them so it isn't an isolated incident. I repair permissions, reset the PRAM, trashed the prefs and I don't know what else to do.
    I am running imac G5's using 10.4.11 and the new imacs running leopard. Both sets are doing it.
    Any help would be appreciated since our classes start soon.
    Thank you.

    Can you tie the crashes to a recent event: a software update, a new piece of hardware? What else is connected to the computers?
    (You have, of course, triple-checked that the FCE Easy Setup matches the footage you're capturing, yes?)
    After the program crashes, is the captured footage saved?
    What's the lab setup? Does each student have an individual user account? On each computer?
    Lots of questions, I know...
    Here's a suggestion:
    Use Disk Utility to repair permissions. Create a new admin account on one computer. Set the FCE Scratch Disk to the internal drive. Disconnect everything but the camera. Try to capture. See what happens.

  • I have a G4050 scanjet compatibility with Image capture... no way to scan 35mm rolls...

    my G4050 worked  "before" correctly to scan 35mm rolls, aso.  For months was not using such kind of scanning,     Recently after trying again such 35mm negs or transparency scans, NO WAY... 
    Image capture doesn't work  for such scan, probably because latest IOS updates  have changed the options. 
    HP years ago provided excellent software  for 35mm scanning with the 4050 but as Image capture is "now" indispensable to scan, but the incompatibility is evident.
    WHY ?
    Are we forced to use another "pro" stuff  ( like Epson 800,  f.i.) to keep scanning  rolls ?  
     Is there a problem inside the PC, the Image  Capture software, or where is the solution  ?   any option  to use other software welcome...

    Similar problem with a Photoscanner HPscanjet 4890 : all ok for doc's pdf pictures ... but no way to scan 35mm slides with the HP soft. The preview scan is OK, as well as the thumbnails of the16 scanned slides. As soon as I start to save those slides, I got a message that the scanner couldn't write the file.
    When scanning multiple slides or 35mm strips the scanner needs to write a text file to organize the separation of all the individual pictures. I saw this under SnowLeopard:the scanner writes a number of small temporary files in the root directory. Apparently, on Yosemite this is not allowed ...
    My work around (from last week) :
    If you have a possibility to boot up on good ol' SnowLepoard -  you can just scan your slides or strips as usual.
    What i did on Yosemite :
    Start the scan, on the sidebar it will show a scan with all individual pictures on it, and below all the single pictures.
    Now, delete all but one of these single pictures.
    Then, on the multiple view, extend the last only selected picture all over all the others, the individual one now shows you the whole assembly !
    Save it (its a single file with all on it, it can grow very large - mine was 1.5 GB)
    Then do the separating job manually, in Gimp i selected and saved picture after picture in individual files. After 50 or so pictures that procedure goes very fast

  • My ipad2 shuts down completely after I press the sleep button and does not start.... Help please

    My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
    This started since the latest update!!!!!!!!!!!!!!

    Hi Alkaf,
    Welcome to Apple Support Communities.
    It sounds like your iPad will not turn on. Take a look at the iPhone article linked below, it provides tips that will help resolve power issues for both iPhones and iPads.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    -Jason

  • Illustrator and Indesign shut down immediately after launching!!

    Illustrator and Indesign shut down immediately after launching!!
    What do I do?!

    Hi Taranwadikwa,
    What operating system are you using? What troubleshooting have you tried already?
    - Dave

  • TS3276 Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

    Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

    Will I lose my emails I have on there? I have numerous client email files and can't afford to lose any of them. I do have everything backed up but I'm fearful of losing important client info. What if something happened during the back up and it doesn't have my files?

  • Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • Macbook shuts down unexpectedly after an hour of use

    I've had my MacBook since 2006, and I've had some minor problems now and then.
    But since few days ago, my mac shuts down unexpectedly after I use it for about an hour.
    at first I thought that maybe it's the fan, cause I've never cleaned the fan since the day I've bought it and my mac gets pretty hot after a while. but it used to work just fine when it got even hotter.
    now I'm guessing maybe it's the battery? I've also never replaced the battery to a new one, cause I've almost always used power adapter instead of using battery alone. but I think I've heard it somewhere that the battery still dies even when you only use power adapter. is this true?
    I usually just turn mac right back on when it shuts down, and it goes well for about 30 mins and then it shuts down again.
    could anyone please be kind enough to tell me if it is the battery that's causing this such a frustrating problem? I don't know if this would help figure out the problem, but this is what battery info says,
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 3674
    Remaining Capacity (mAh): 3648
    Amperage (mA): 0
    Voltage (mV): 12443
    Cycle Count: 105

    Thank you so much for answering! I've actually read your answer to other similar forum, and have just installed iStatPro. it says that my fan is "exhaust" and at 0rpm. do i HAVE to replace the fan to a new one? can I just open up my mac and clean out the fan? if so, would you recommend this instead of buying a new fan? one last thing, if I buy a new fan, is it easy for me to replace it by myself? again, thank you so much for your answer.

  • Facebook shuts down unexpectedly after a few minutes.

    When using Facebook on Safari, Google Chrome or the app it shuts down unexpectedly after a few minutes.  I tried restarting my iPad, reloading the app & deleting the cookies.  It's frustrating.

    Gilroy4 wrote:
    Just this evening, my new 23" Intel i3 Mac starts randomly shutting down after a few minutes each time. Thoughts?
    Humm.... my first thought is that the new iMac's only come in 21.5 and 27" and the second is that your not giving us much to go on. You know things like, it ran fine for the first hour, day, week, month, I checked the power cord to make sure that the connections are tight, I followed the User's Guide, it was working fine until I upgraded the RAM, plugged in my printer, an External Hard Drive, I started having this problem after I downloaded xxxx, it fell off the desk, I dropped it down the stairs on the way from the car to the house, the UPS driver kicked it off the back of the truck, you know the basic stuff like that.

  • My calendar just shuts down immediately after opening.

    Hello,  My calendar just shuts down immediately after opening.  I reset the ipad and it still isn't working  Any ideas? iPad 2

    I only kow how to disengae yahoo but maybe the process will help for other email accounts linked to ipad calendar.  Just remeber to go to email accounts and shut down any associations with other programs.
    Here is what I did in yahoo.mail
    Went to My Yahoo
    selected quicklinks (on top left of page)
    Calendar was not shown , so I selected more yahoo services at bottom of list.
    Candar was among many and I selected it.
    You then see your calendar with a margin on left that probably shows a checked box of te name of you calendar.  Uncheck it.
    Also check the subscriptions.  You must decide what makes sense for you there.
    To be more sure,  delete any recent calendar entries in your yahoo calendar or ipad calendar that might have cuased the problem.  that's what happened to me.  I noticed the problem right after I accepted a ics invitation from some else.  I think the ics invitation that I accepteed from my email was the real culprit but who knows.  All I know is that all these things combined solved my problem.
    Close the My Yahoo
    Remeber to check your ipad for any associations and eliminate them and point the ipad calendar to icloud.
    Reboot you ipad
    Check for results
    I hope this helps

  • TS1717 iTunes shuts down immediately after opening (Windows 7)

    I'm having trouble with iTunes shutting down immediately after opening. I've tried reinstalling iTunes and QuickTime, but I'm still having the same problem. Any suggestions? I have a 64 bit version of Windows 7, and the iTunes installer file has "64" in the name, so I think it's a 64 bit version as well.

    Do you get an error message when iTunes shuts down? If so, what does it say? (Precise text, please.)

  • PPC MacMini shuts down immediately after boot, LED blinks

    A client gave me his PowerPC MacMini which boots up but then shuts down after a few seconds. Unfortunately, there's not enough time to open the system preferences between booting and automatic shutdown.
    I've tried to boot the computer from a system DVD and with "T" pressed for target mode, but it always boots up completely from the internal drive. Booting with "Shift" pressed boots in safe mode, but the machine still shuts down after a few seconds.
    Interestingly, the power LED blinks about once per second. I wasn't able to find anything about this on the Net.

    AndyO wrote:
    If, on the other hand, the mini is starting up, and then failing, and the light isn't so much blinking as pulsing, then the system may be suffering protective shutdown as a result of overheating. That can be tested by seeing whether it runs longer after being left unplugged for several hours, thus being cold, than it does if it's been running (or attempted to be run) for some time, and is thus already warmed. In that event, the mini will need to be disassembled to some extent to try and identify whether the fan is running, the CPU heat-sink is firmly attached and the thermal pad which is squeezed between the underside of the logic board and the base of the system is replaced.
    I have a Mac Mini Intel Core 2 Duo that is suffering almost the same symptoms (shut-down almost immediately after startup); however, it DOES appear to be for a variable length of time based upon how much time I let it sit and 'cool' down; therefore, I believe I'm experiencing an over-heating issue.
    I've installed a matching 1GB pair of RAM about 1.5 months ago and all has been fine until now. The unexpected (which is now expected) shutdown after startup is occurring on both Mac OS X 10.5.2 and Windows Vista (on Boot Camp partition) ... of particular note ... the Windows side shuts down more quickly (likely due to it not having the same system monitoring/energy handling tools that would be available to the Mac OS X side ... so I would suspect it to over-heat sooner on the Windows side).
    Successfully completed Hardware tests (simple & extended) reported memory and other system hardware was fine. 'Check/Verify Disk' on Mac/Windows side reported no issues with either partitions.
    Attempts to reset the PRAM and SMC have not solved the problem.
    There was one instance, after startup, that the fan ran at full speed continuously and noticed that the power light was not on at all ... at the time, I was on the Mac startup disk and it stayed up and running for about 20 minutes or more until I decided to shutdown and test the Windows side. Upon restart, the fan did not run continuously, and the Windows side shut-down shortly after start up.
    Overall, I'm fairly convinced it is an over-heating problem. If anyone has any ideas or reference material to confirm or how-to-do "the CPU heat-sink is firmly attached and the thermal pad which is squeezed between the underside of the logic board and the base of the system is replaced" that would be greatly appreciated.
    I am not ruling out sending the machine into the retailer for servicing/diagnostics; however, if there's a relative quick fix so that I don't have to identify and remove confidential/sensitive info first, that would be preferred.
    Thanks.

  • Viber shuts down / close after i open it , tried reinstall

    Viber shuts down / close after i open it , tried reinstall .. Deleting and installing again ..
    Can too much groups cause this ? ..
    What to do ?
    I have iphone 4s 5.1.1
    Thank you .

    Hi guys!
    This is a member of the Viber Team.
    Please contact our support team for further assistance at: http://helpme.viber.com/index.php?/Tickets/Submit/RenderForm/13
    Please feel free to let us know your thoughts, questions and comments, we'd be happy to assist.
    Thanks,
    Viber Team

  • My mac book pro shuts down just after it is started

    My MacBook Pro shuts down straight after it has been started. A bar appears at the bottom of the screen that I've never seen before! A tiny part of it is filled, it disappears and the machine shuts down.

    My suggestion is to work through the options here -> If your Mac won't turn on - Apple Support

Maybe you are looking for