Image capture stucks when using Canon CanoScan LiDE60 scanner

Hi,
I tried to use Image capture to get an image from a book. I chose the following options :
600 dpi
Text
Save in : Desktop
File type : PNG
I started the scan, it scanned. But instead of putting a file on the Desktop and show it with the Preview application, it stucks there indefinitely. I have to close it down, but afterwards, the scanner does not scan anymore. It only works again by restarting the system.
Can someone have a clue of what's going on?
Thanks,
Frédéric Chiasson
MacBook Mac OS X (10.4.8)

Hi there,
The CanoScan toolbox application lets you set which application you use to scan a document and where to save a scanned document. If you haven't configured this, it will be impacting the operation of the scanner. Open the application and I would suggest you set Preview to be your scanning application instead of Image Capture. If you want to save to the desktop this is where you can set this also.
Paul

Similar Messages

Image Capture won't scan: Canon MP 610

Hello,
I experience a strange bug in Image Capture which I use together with my Canon MP610. When I put a document on the scanner Image Capture will show a preview and then scan the document. This works fine.
Sometimes I need to make some manual corrections by using the button "show details" and then resize the scan area after the program has analyzed the picture. After I made the corrections I hit the "Scan" button but Image Capture will return with the message "Scanner has reported an error" and "An error occurred during scanning".
I first thought it might be a driver related problem as I recently updated the drivers from the Canon site. Before I installed the Canon drivers and used the OSX drivers all worked fine.
So I removed all drivers from Canon and hoped the Mac would use the old drivers again. That didn't work either as the system couldn't seem to find any usable driver anymore. I reinstalled the Canon drivers and all works well again except for the Image Capture program.
As long as I don't use the "Show Details" button the scanner works just fine. But as soon as I make some manual corrections the scanner error message pops up and the scanner won't scan the adjusted preview.
So I know for sure the Mac sees the scanner and can control it as the scanner does deliver the images to the folder I specify, but I can't do any manual corrections.
I already deleted the file "com.apple.ImageCaptureApp.plist" but that didn't solve the problem. It appears to be a bug in the program itself or a conflict between the app and the drivers from Canon. How can I revert back to the drivers that my Mac used before I installed the Canon drivers?
Thanks!

Thanks PAHU that were a lot of drivers for sure in your link and I installed those. Unfortunately, nor the driver package nor the ICA driver did solve my problem. I'm beginning to think it might just be a bug within Image Capture, although Image Capture is stating the scanner is reporting an error. Strange thing is that Image Capture will work fine as long as I hide the details pane.
It seems to be an isolated problem too as I can't find any other subject on this on the net. I see more people having trouble to scan images with Image Capture but that's mostly related to not selecting the right part of the preview. I will see if I can reinstall Image Capture from the OSX dvd.

WDS 2012 Image Capture - Stuck at 50% "Capturing Windows image metadata..."

I have tried capturing a few images after running sysprep, and they are getting stuck at 50% completion, never moving past after hours of waiting. "Capturing Windows image metadata...". If I look on the WDS server I see that the file
hasn't been modified since it was actually capturing and moving the progress bar.
Has anyone ever experienced this, or have any ideas of how to troubleshoot?
Thank you!

Hi motenoob,
What system edition and MDT edition you are capturing? If it is Windows8 or 8.1, it seems is the know issue, you can refer the following KB:
Sysprep and Capture task sequence fails when it tries to capture Windows 8 or Windows 8.1 images
https://social.technet.microsoft.com/Forums/en-US/4e28cac0-29e4-4f24-a8f0-30d34d543a76/wds-2012-image-capture-stuck-at-50-capturing-windows-image-metadata?forum=winserversetup
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the Cannon website for the correct driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

Using Image Capture to scan with Canon Pixma MX700

I previously had trouble connecting my Canon Pixma MX700 to my MBP, but soon figured out that I needed a new high speed USB 2.0 cable, versus the old one I was trying to use it with. Doh!
So now it prints without any trouble at all, and I know that all its features - printing, scanning, fax, copier, are supposed to be compatible with Leopard.
However, I'm still having issues scanning. I Googled and found a comment somewhere that with this specific model, one has to use Image Capture for the scanning portion, instead of the Canon software.
Great, so that explained the problem I was having trying to figure out how to GET it to communicate at all with the MBP (downloaded the latest scanner driver from Canon with no result).
But it still will not scan with Image Capture. Communication is fine- the image is detected and I can see it perfectly in the Image Capture window, am able to change options, etc. Once I drag and select the image I want to scan and click the scan button, nothing happens. Or more specifically, the button will be click-able and for about two seconds it appears to be working (with the scan button substituted by a cancel button), but then the scan button will pop back up and nothing appears in the folder I specified the image to be saved to.
Now I'm completely stumped. What am I doing wrong?
Thanks!!!

With my MacBook running Leopard, I had been able to successfully scan multiple images by pressing the MX7000 scan button and capturing the images with MP Navigator. The MX700 is networked over WiFi. Early on, I learned that it seemed to be more reliable to drive this process using the scan button, rather than trying to initiate the scan from the MP Navigator UI.
However, recently things stopped working, and after the first image was scanned, subsequent scans would fail, with MP Navigator complaining about not being able to connect to the scanner. This sounds similar to the problem described in the original posting.
I went to the Canon USA support site and downloaded /installed the latest versions of the MX700 scan driver (13.9.0) and MP Navigator (1.0.4), both available under the "Drivers and Downloads" section for the MX700 support page (be sure to select "Mac OS X" from the pull-down menu).
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDeta ilTabAct&fcategoryid=238&modelid=15651#DownloadDetailAct
The new updates seem to have solved the problem, and I can now scan multiple images one after the other. Again, I always initiate the scan from the button on the MX700, and always capture using MP Navigator, which has the really nice feature for creating and editing multi-page PDFs.
Message was edited by: donbondio

Image Capture not working with Canon LiDE 500F

Image Capture version 6.0.424 and CanoScan LiDE 500F 11.2.5.0 does not work properly.
Regardless the resolution, the resulted file has a very small size.
As a test I scanned a 9x20cm document at different resolutions and for all resulted files 'Get Info' reported small dimensions: 69x147 pixels. It is interesting that the size of the file varies with resolution, but when opened in Preview or Acrobat Reader, the small size is used.
As for other reports, CanoScan Toolbox works properly.
Regards,
Liviu

Hello Liviu,
There has been a couple of posts regarding the same issue with Image Capture. Have a look at this one for example.
http://discussions.apple.com/watches!add.jspa?forumID=1344&threadID=2272250
As I stated in this thread, I do not have this problem with Image Capture and my LiDE 200 or my MP980 AIO. So there must be something with the drivers used by these older model of Canon scanners when using Image Capture.
I haven't seen anyone provide a solution as yet so you may need to escalate this to Canon if you have a need to use Image Capture.
Pahu

Image capture does not recognize Canon Scanner

I have two Canon Scanners, a Canoscan 8800F and a Canoscan LiDE 60. Image Capture does not recognize either of these. Both worked with Mountain Lion.

This user found some success acutally using *older* drivers. While that sounds odd, it might be worth a try: https://discussions.apple.com/message/23759017#23759017
I used to have a LIDE 60 - it is a great little machine. Good luck!

Anyone been able to get OS Image Capture to remote trigger Canon EOS DLSR?

Hi
I am connecting my Canon EOS 50D DLSR to a MacBook using USB.
I am able to copy photos off the camera's memory card, however the built in OS X Image Capture software refuses to remote trigger the camera to take a picture.
I need to try get it working as being able to remote trigger the camera using the Image Capture software is a pre-requisite to using iStopMotion animation software which apparently uses the same Quicktime framework.
Thanks in advance.
Chris

iStopMotion fails to trigger the camera. I have been in contact with the developers and they say that iStopMotion uses the same Apple Quicktime framework as the OS supplied Image Capture software (which does have a Take Picture menu option)
So essentially if I can resolve the issue and get the Apple OS Image Software to trigger the camera it is a good indication that the issue is resolved and the iStopMotion software will also work.
I am using the Image Capture software to test the issue as my free demo license to iStopMotion has now expired and obviously I don't want to buy the software unless I believe it will work.
Any Canon EOS 50D DLSR owners out there who can test their camera with the Mac OS Image Capture Take Picture option?

IPhoto / Image Capture doesn't find Canon Powershot Camera

Since I upgraded to Lion, my Macbook no longer sees my Canon Powershot SD 1200IS camera. Tried using iPhoto and Image Capture (following someone else's suggestion). No SD slot on my Macbook. Is there another solution?

Since I upgraded to Lion, my Macbook no longer sees my Canon Powershot SD 1200IS camera. Tried using iPhoto and Image Capture (following someone else's suggestion). No SD slot on my Macbook. Is there another solution?

Problem capturing DV format using Canon HV40

Although I can capture HDV, when I play a DV tape back. no video is captured, although Premier Elements 11.0 indicates that it is capturing video. The HV40 automatically outputs DV when a DV tape is played back. I have tried specifying capturing from a DV device, but then Elements tell me that there is no device control. I tried specifying DV as the format, but that doesn't work either. Any advise will be appreciated. OS is Windows 8.

Steve Grisetti wrote:
HDV is tape-based high-definition video. Are you capturing tape-based high-definition video over a FireWire connection?
Yes. HDV capture works fine. DV capture does not work
What model of camcorder is your video coming from?
Canon HV40
If you are getting DV from your camcorder, you must have it set to DV Lock. Is this your intention, or are you trying to capture high-def video?
The HV40 automatically outputs DV when a DV tape is played back. It cannot upconvert DV to HDV. Intention is to capture the DV as DV,
Have you ensured that you have the latest version of Quicktime, per the program's requirements?
Don't have Quicktime installed as far as I know. Will check.
Do you get different results if you use the free download HDV Split to capture your video?
I don't have a problem with HDV capture. Have not tried HDV Split

IPhoto & Image Capture don't detect Canon Ixus 850 IS in one identity

So, bear with me on this one, it's a long saga:
Canon Ixus 850is doesn't appear as a device to have photos imported from one identity on my iMac, but does work on others.
Symptom: Plug in the camera and it doesn't "switch" into computer mode (preview screen goes blank, card reader light flashing. It does this in another identity on the same computer. System profiler shows it connected to the USB port. Image capture -> Browse Devices shows the camera, but it's not "connected".
Things I've Tried:
PRAM reset
Permission repair multiple times
Removing all the user's start up items
clicking "connect" in Image Capture -> Browse Devices (nothing happens)
new USB cable
different camera -> I take this to mean it's not the camera's problem, but the mac. Another canon isus (different model) has the same problem.
iPhoto library rebuild
Removing image capture preference files
Multiple restarts
All software is up to date (OSX 10.5.7 & iPhoto 8.0.3)
Reinstalling canon software
I'm at a total loss. Any ideas (except for using a memory card reader
Thanks!
Matt

Ah ha! Interesting output. But I have no idea what it means
21/06/2009 08:29:45 PTPCamera[4191] * -[NSCFString unsignedShortValue]: unrecognized selector sent to instance 0x20f2b0
21/06/2009 08:29:45 PTPCamera[4191] * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSCFString unsignedShortValue]: unrecognized selector sent to instance 0x20f2b0'
21/06/2009 08:29:45 PTPCamera[4191] Stack: (
2454093995,
2422894139,
2454123178,
2454116524,
2454116722,
256656,
2482626051,
2482497525,
2482495254,
2482456086,
2482454392,
2484450193,
301501
21/06/2009 08:29:45 PTPCamera[4191] Stack: (
2454093995,
2422894139,
2454123178,
2454116524,
2454116722,
256656,
2482626051,
2482497525,
2482495254,
2482456086,
2482454392,
2484450193,
301501
21/06/2009 08:29:51 ReportCrash[4192] Formulating crash report for process PTPCamera[4191]
21/06/2009 08:29:51 ReportCrash[4192] Formulating crash report for process PTPCamera[4191]
21/06/2009 08:29:53 ReportCrash[4192] Saved crashreport to /Users/Matt/Library/Logs/CrashReporter/PTPCamera2009-06-21-082946iMac-3.crash using uid: 501 gid: 20, euid: 501 egid: 20
21/06/2009 08:29:52 com.apple.launchd[527] ([0x0-0x11a11a].com.apple.PTPCamera[4191]) Exited abnormally: Trace/BPT trap
So I looked at the logfile. It's huge, but here's the header:
Process: PTPCamera [4191]
Path: /System/Library/Image Capture/Devices/PTPCamera.app/Contents/MacOS/PTPCamera
Identifier: com.apple.PTPCamera
Version: 4.0.1 (4.0.1)
Build Info: ImageCaptureDevices-5750300~1
Code Type: X86 (Native)
Parent Process: launchd [527]
Date/Time: 2009-06-21 08:29:46.229 +0100
OS Version: Mac OS X 10.5.7 (9J61)
Report Version: 6
Anonymous UUID: EF8744D7-5A59-410A-962C-5736A20D96F0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Application Specific Information:
* Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSCFString unsignedShortValue]: unrecognized selector sent to instance 0x20f2b0'
Any thoughts?

How to embed image in html when using JTextPane, HTMLEditorKit, JavaMail

I am developing a specialized e-mail client that has to be able to send e-mail messages (in html format with images and attachments) that can be read by standard e-mail clients, and receive similar messages from standard e-mail clients.
I have everything working except for embedding images.
Images are to appear in the document mixed in with the text, but that's not what I mean by "embed". By "embed" I mean that the image itself is encoded within the html.
Here's a bit of code to set the context.
JTextPane bodyPane = new JTextPane();
bodyPane.setEditorKit(htmlEditorKit);
bodyPane.setTransferHandler(new DropHandler());
bodyPane.setDocument(new HTMLDocument());
In the DropHandler I have the following:
HTMLDocument htmlDoc = (HTMLDocument) bodyPane.getDocument();
HTMLEditorKit htmlKit = (HTMLEditorKit) bodyPane.getEditorKit();
int caretPos = bodyPane.getCaretPosition();
At this point get "filename", the full path to an image file that has been dropped onto bodyPane.
String htmlString = "<img src=\"file:///" + filename.replace("\\","/") + "\">";
htmlKit.insertHTML(htmlDoc, caretPos, htmlString, 0, 0, HTML.Tag.IMG);
This works just fine. The image is displayed in the document at the point of insertion.
However, the image itself is an external file. I need to send an e-mail with this image and could send the image file as an attachment, but I obviously can't assume that the recipient of the email is going to save the attachment into the proper location.
What is the best way to do this?
There is a technique for embedding the actual image in the html, using this syntax:
String htmlString = "<a href=\"data:image/png;base64,---mimed png image here--\" alt=\"Red dot\"></a>";
I can't get this to work in JTextPane, so perhaps it's not supported. Also, there may be limitations on the size of an image. And apparently Internet Explorer doesn't support this.
From what I read, using a "content identifier", that is, "cid:" and adding the image as another part of the e-mail message is probably the thing to do. I haven't taken the time to explore this yet.
Does JTextPane support cid? Is that a nonsense question? I suspect what I need to do when the message is being composed is use absolute paths to local files with the images, and then when assembling the e-mail, attach the files and rewrite the html to build in the cid linkage. Similarly, when reading a message with cid's, the thing to do is save the body parts as files and rewrite the cid to point to the actual file.
I have seen others ask similar questions, one as recently as last December, and the reply was to refer to a Sun tutorial. But that tutorial doesn't address the full problem of 1) inserting an image into a document (instead of attaching an image to a component) and 2) sending it as an e-mail message.
I have yet to see an example that shows the complete package.
Am I right that the data option I mentioned is not going to work?
Am I right that cid is the best approach, and do I understand how to use it?
Is there something else?
Thanks
John

Hi Rocky,
Are you using the DC?
if yes then you need to put the image inside the component folder. after that close the application
& reopen. You will get the image.
In case this does not work then try refreshing the portal through server side. Once the cache is cleared, it will be up to view.
Also check the Activity list you have created. It should be added to the dtr properly or else it wont be reflected once reimported the configurations.
Regards
Chander Kararia

Alt key stuck when using mouse in flash CS5.5 on os x lion. sucks. please help.

Hi there,
since I've updated to lion flash cs5.5 is utterly unusable. The alt key is always stuck in this app when I use the mouse. So if I select something then try to move it, it copies it (as if I was holding down alt key). It basically means I can't use flash for anything..
Has anyone else had this issue and resolved it?
I saw similar forum posts for photoshop cs5 and snow leopard, and even tried the utility provided on those forums. Didn't work.
I removed my wacom tablet driver,
I reinstalled flash,
I shut down EVERYTHING except flash. Nothing works - alt key is always active in flash.
Is this some kind of bad joke from Adobe? Is there really no fix for this? I can't believe it - honestly...
Additional note - in the key remapping page - it reckognizes the alt key normally, and all other key combinations - it is only when using the mouse that the alt key is stuck.
El mensaje fue editado por: georgecookontheroad

Hello,
I was having the same exact problems with Flash Professional after upgrading my OS X to Lion. (Alt/Option key seems like it's stuck / Duplicating objects on stage just by clicking and moving the object.) My main problem was not being able to curve a straight line with the Arrow tool. Instead it would create a corner point as if the Alt/Option key was being held.
I stumbled upon this thread before finding my solution so I thought I'd share what worked for me.
Here is the thread I found with the solution that worked:
http://forums.adobe.com/message/5222999
Basically I had a program called AirDisplay installed. AirDisplay allows me to use my iPad as a second monitor for my Mac. So if you have this program installed, or one similar to AirDisplay, uninstalling this program may get your Flash Professional to work correctly again. It certainly did for me to my amazement.
Hope this works for you or anyone else who is experiencing this weird and frustrating problem!

Capture setting when using a firewire and camcorder

does anyone know the capture setting I use when importing from a dvc camcorder using a firewire

Typically it would be DV/DVCPro (NTSC or PAL), 48khz, 16 bit.
-DH

Image capture stucks when using Canon CanoScan LiDE60 scanner

Similar Messages

Maybe you are looking for