Image Charts not producing images

Hi all,
We are using Oracle8i 8.1.7 database on Sun Solaris 9 and Portal 3.0.9.8.4 on the same server, I am trying the Image charts, it is not producing images, any ideas ?

Hi,
Are you getting any errors in the log? Look for errors in the log file of jserv.

Similar Messages

CS6 Images saved not showing image in preview finder to upload or open.

When saving images in CS6 I can see them as preview icons of the image in finder by itself, but if I open a file in photoshop to find an image, i only have titles and not the images. ALSO when I go to upload an image to blog or facebook, again I have no image icon of what is there, only a blank space and a file name. I HATE THIS as it makes it takes too much time to figure out where the picture is. I am a graphic artist and a painter and I cannot work like this. HELP PLEASE. Does not matter what type of file.. tiff, png, jpg etc... there is no image to see when opening through photoshop or any upload situation. I am able to see the images from FINDER by itself or if I am placing them into MUSE or INDESIGN.
SO I am totally confused why I cannot see them to load on blogger or facebook or to open them in photoshop.
Mac OS X lion 10.7.4 NVIDIA GEforce 7300 GI 256 MB 2x2.66 GHx Daul Core Intel xcon 10 GB 667 mhz ddr2 fbdimm
Is this what you need?
Pace

Not sure if what you're seeing is related to the general problem being reported about missing thumbnails on Macs, but you might want to look through this (fairly long) thread:
http://forums.adobe.com/message/4425269#4425269
-Noel

Alias to Image does not display image preview icon (Regression!)

I noticed that an alias to an image no longer displays the underlying image preview in the icon, instead you get the standard "JPEG" icon.
I have turned on icon previews (since other images in the same folder are correctly displayed) and all that. Also if you press Space on the Alias, the fancy Preview window will open and show the correct image. The icon however is dead. I've tested this with many images and with both OS created Aliases and using "ln -s".
This seems to apply to all kinds of alises that in the past would show the icon of their parent, not only images.
The alias "arrow" overlay is enough to inform the user that the file is an alias, there is no need to display the standard "JPEG" icon, that is so passé.
Not very leopardy.
Message was edited by: zeraien

The same thing appears to be a latent bug from Tiger -- I am seeing this in 10.4.11, and as Rob notes, it's not always consistent.
What's worse, Rob's suggestion won't work for me... because the "Select New Original..." button is greyed out! I realize this is technically a Leopard thread, but I can't imagine this was deliberately changed between 10.4 and 10.5, so I would think it would be applicable pretty broadly.
Any ideas or suggestions would be very welcome indeed.
Thanks,
/H

Image Viewer not showing images

I have image viewer working successfully on several other
sites but I can not get it to work from this one.
I am trying to get a auto looping image show of 4 images.
I tried this initially with 4 images and nothing showed. I
deleted the Image Viewer and attempted it again using a single
image and still nothing shows. I know the image is there because it
appears on another page.
I have uploaded the javascript into a Scripts folder and all
appears fine but no image ever shows.
Can anyone tell me what I am missing? The page is
http://advancedptme.com/jp_test.html

In other words, it doesn't appear that your site is properly
defined in
Dreamweaver.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Ken Binney" <[email protected]> wrote
in message
news:g9j5dk$rep$[email protected]..
> Your page link points to gallery1 in the root folder of
your site, but the
> Scripts folder and the Spry assets folder links are
pointing to one level
> above the root.
>
>
> "D.Devito" <[email protected]> wrote in
message
> news:g9j1no$npv$[email protected]..
>> when i preview my image viewer from dreamweaver in
safari its all fine
>> but once
>> uploaded to the web its just blank
>> all the code is there.. can anyone help me.. please
>>
>> the page is
http://www.lisamoffattphotography.com/gallery1.html
>>
>
>

Image Field Not Displaying Images Properly

I am using LiveCycle Designer 7.0 for the sole purpose of having the ability to insert an image field on my documents. I have set up the image field so that an inserted image is scaled-to-fit and right-aligned. When I insert an image, it does insert scaled-to-fit; however, it is always centered. When my coworker inserts an image it is stretched-to-fit and centered. I have double- and triple-checked that I have formatted the image field correctly. It isn't working as programmed. Is this a bug with LiveCycle Designer or is there a way to fix the problem?

Hi guys,
I'm also having this issue with Image Fields in Reader 8 - they skew no matter what setting you choose to display them as.
Anyone know of a workaround (maybe a javascript to force image proportionality?)? Image Fields are not very helpful if you require all of your users to download Reader 9...
Also, I'm aware that Image Fields work properly as long as you do NOT import a pdf as background artwork. So it could potentially work if you save your background pdf as an image and add it into a new Designer file as an image. But this causes loss of picture resolution...
Appreciate any help!

Printer not producing image despite ink being full

I am having trouble with my printer. although it is working it only prints very faintly - and in colour only the yellow. it tells me the inks are full and in fact ive not had this long so shouldnt think it needs new cartridges as y et. its an hp deskjet wireless model 3050A J611
THANKS IN ADVANCE FOR ANY SUGGESTIONS

Hello-
If you are using the cartridges that came with unit, they might be empty. Try to print a "printer status page" from the printer. This give more exact ink levels.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

Image Processor not closing Images

When I use the image processor from Bridge, I specify that I want it to process the images selected in Bridge, save as a PSD and run a set of actions. The files do get saved to a PSD folder, but they do not get closed, so they all remain open. This slows the process down dramatically and it used to close them all, as it should. Any help in getting it to close the files after processing them would be helpful!
Thanks!
Jamaica

Hi R_Kelly,
I am using CS6 (the newest version) and OSX v 10.7.5 currently.
I tried putting a save in the action, but since I'm batching raw files, it wants to pop up a save as box at the end of every image. No bueno.
I tried each of the three actions, that I have combined into one action, individually and the system closes them all just fine.
Here are a couple of screen shots to see what the error is, the PSDs are created and put into the PSD folder (great!), but they don't close!
The action is made up of several actions that I use. As I said, they all play fine individually and close as they should, but once they are all together, they won't close.
If you can figure it out, I'd be soooo grateful!
Thanks!
Jamaica

Library module: clicking on filmstrip image does not change image in loupe

LR 3.4.1, 64 bit, Windows 7
In the library module, clicking on an image in the filstrip does not update the image viewed in the loupe view. How do I get that behavior back?

Well, whatever it was, it went away with a reboot. Thank God.

Image Capture not finding images taken under iOS 4

After updating to iOS4 I'm not able to download images from my phone via Image Capture. Image Capture simply doesn't show the images taken since the update, in the browse window of the application.
So my question, with a conditioned subquestion is:
-> is there a fix for this issue?
->->if not: does anyone know of another way to get images and videos from the iPhone without going trough iPhoto.

Found the solution. For Lion, you need to install the Canon driver for Snow Lep 10.6 then reboot. Once that is complete, the scanner will show up as a valid device.

Jmagick produce image in memory??

Hi friends,
I want to produce image via jmagick. But I don't want to produce a real file. So I produce image which save in the memory. When jmagick process completely, image will transfer to client.
I wrote sample code, as follows:
ImageInfo info;
MagickImage image;
MagickImage scaled;
try{
System.setProperty("jmagick.systemclassloader","no");
info = new ImageInfo(request.getRealPath("/")+"Image/"+filename);
image = new MagickImage(info);
image = image.cropImage(new Rectangle(0,0,100,100));
scaled = image.scaleImage(200,200);
byte data[]=scaled.imageToBlob(new ImageInfo());
response.setContentType( "image/jpeg");
OutputStream toClient=response.getOutputStream();
toClient.write(data);
toClient.close();
     } catch(MagickApiException ex) {
                  System.out.println(ex);
     } catch(MagickException ex) {
            System.out.println(ex);
     } finally{//release memory
              info=null;
               image=null;
               scaled=null;
               System.gc();
      }But I found......
When many people connect to this webpage, my memoey will increase very fast. And jmagick will not produce image. I don't know how to solve this problem.
Please Help me...
Thank you very much..
Regards,

If you create a lot of images in memory then that will take memory. So memory will go up.
I have no idea what ou mean when you say the image isn't produced. Do you mean never? Then there is something wrong with your code here or you are not returning the correct thing to the clients.

Photoshop Elements 9 Editor not showing images in Project Bin

Yesterday I went though my PE9 Organiser and rearrange some of my files and made sure that it was more user friendly.
Today I went in to try and do some edits and not all of the folders are showing up in PE9 Project Bin. I can view some images, but not all images. I know that I can view some images that I move yesterday, but there are some that weren't moved that I can't see and some that I didn't move that i can't see.
When i go to my Organiser I can see that the images are tagged and in the folders - why can't PE9 Editor show them to me?

Hi,
Can you please tell where are folders visible in Project Bin?
I can't see folders in my PE9 project bin.
Thanks
andaleeb

Why item button only show #APP_IMAGES# image but not #WORKSPACE_IMAGES#?

Hi All, I have a item button with Button display attributes - Style as Image. I don't know how come it can only display #APP_IMAGES# image but not #WORKSPACE_IMAGES# image. Please help... Thank you in advance. :)
Chris

Hi All, I have a item button with Button display attributes - Style as Image. I don't know how come it can only display #APP_IMAGES# image but not #WORKSPACE_IMAGES# image. Please help... Thank you in advance. :)
Chris

Error -1074396120 IMAQ Get Image Info Error "Not an image"

Hello everyone,
I'm currently working on Machine Vision project. It has to measure distance of small metal elements, which moves on a conveyor. I've built and tested measurement algorithm in NI Vision Builder and it worked really cool. Today I tried to migrate inspection to LabVIEW in order to add features connected with sensors which I use in my project. When migration completed I run a VI, and suddenly got error:
Error -1074396120 occured at IMAQ Get Image Info
Not an image.
I use in my project Logitech Pro 9000, and I can see it in MAX. I acquire image in 640x480 resolution as RGB2. I read somewhere that it could be caused by RGB colors of image. In my algorithm after acquiring image is thresholded in order to get binary image.
Please tell me which block diagrams should I attach to this post to make it more understandable for you (if it is needed). Is it possible to fix this error ? Did anyone sorted it out already ? Thanks for any help.
Best regards,
Michael

First of all I would like to apologize for long delay in replying and thank you for your replies.
@toto26:
Yes, I used before threshold function a function you mentioned. The problem is that my algorithm works correctly in Vision Builder, but after migrating to LabVIEW, when I run a VI it doesn't work. It's strange for me.
The problem also occurs when I made my algorithm as simple as possible - now it includes two steps: acquisition and find edge function. After migration it still cannot acquire an image. Below I present an error and a place where it occurs (process ID already in use):
I think that it would be easier and faster when I understand IMAQ functions. I want to build my algorithm from the beginning in LabVIEW, because I would be aware of every part of my program. Please tell me if it is possible with my camera. Could you suggest me where can I find information about building vision application in LabVIEW for beginners. What keywords should I look for.
Thanks for any advice,
Michael

Not all images appear in browser?

Could someone tell me why this page shows some images but not all images? http://www.phyllisconnellphotography.com/MX_Supercross_2.html

Remove the special characters from your images. For example, the # in the image below...
mages/MX_Supercross-119-3_#409.jpg
For the names of images and pages, you should never use special characters like # or & (even spaces should be - or _ instead). Those items have special meanings in html and javascript and can cause problems. Luckily, you can kill two birds with one stone. Go into your images folder from within the DW Files tab and rename them there. That will then automatically update all of your links to the images. Reupload and you should be good to go.
On a side note, I notice a mailto: link with an email address in your source code. That's a very good way to get an email address harvested by a spam bot. You may want to look into a form to email script like formmail from http://www.tectite.com which will allow you to hide that address from spammers.

PIE Chart image si not displaying

i develop a pie chart using .net 1.1, crystal report.
when i run my application in my local meachine, the data is coming
but chart is not dispalying.
i am getting cross red mark in place chart and crystal report navigation button images are also not dispalying.
Thanks in advance.

Hi
Thanks for y'r response.
Data is correct, i am taking name as on change field value, and salary on show value.
i am not getting images of navigation buttons also.
i am doing my first application in piechart.
so i don't know how to check sort options?

Image Charts not producing images

Similar Messages

Maybe you are looking for