Image Class multifuntion Printer MF4150

Copy,Scan,Fax lights all on and cannot do anything. I can print from computer and receive faxs. Any suggestions other then buying a new one.
Thanks Glenn

Hi Glenn!
I will be glad to assist you.
It appears that one of the buttons on the control panel may be sticking and causing the error. I recommend powering off the machine and unplugging it from the wall. Once the unit is unplugged, press all of the buttons on the control panel, starting left to right, one at a time. Next, plug the machine back in and power it on.
I hope this information is helpful to you. If the error persists, I recommend that you contact us at 1-800-OK-CANON (1-800-652-2666) for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

My Image CLASS MF4350d printer is not recognized by windows 8-64 bit

My Image CLASS MF4350d printer is not recognized by windows 8-64 bit any help how can i fix the problem. I just bought new HP computer from Future shop and it came with Windows in it. but this windows8 doesnt have drivers for my printer Image Class MF 4350d. Now I hve no clue how can i fix this isue. Because I checked on Canon website for drivers and downloaded and run the drivers, but no solution for my printer at all.

Yes. I have the latest version intalled but this hasnt helped.
I thought it could be to do with the Shuffle not having enough of a battery charge.
So i plugged it into the wall charger and then tried this didnt work either.
It wont even play music for some reason. The only information I get in the earpiece when I turn it on is what the battery level is at.

Image Class 7470 printer won't power up

My Image Class 7470mf printer will not power up. Is there a power reset or is there a serice manual available (online preferred) where I can troubleshoot this problem?

Hazinpa, HP printers go to sleep if the printer is not active for more than 30minutes and however if the wireless radio button is ON and your network is installed fine then when you give the print command the printer automatically comes out of sleep mode to print.

Where can I download a WSD device driver for the Image class D1320 printer

Hope printing carbon good otherwise you try to use printing service.

You may try getting the driver you want from: http://www.officialdriverdownload.com/.Hope this could work for you.

Cannon printer/scanner image class mf4150

can I install my cannon printer/fax/scanner image class MF4150 to my IMAC OS X Mountain Lion?

Hi Glenn!
I will be glad to assist you.
It appears that one of the buttons on the control panel may be sticking and causing the error. I recommend powering off the machine and unplugging it from the wall. Once the unit is unplugged, press all of the buttons on the control panel, starting left to right, one at a time. Next, plug the machine back in and power it on.
I hope this information is helpful to you. If the error persists, I recommend that you contact us at 1-800-OK-CANON (1-800-652-2666) for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Setting Black and White as the default when printing to a Canon Image Class 4080i

Hi,
I've got two Canon Image Class 4080i's that we are printing to at the school I work at. I have installed the Canon UFRII V2.40 Printer Driver for Mac OS X and we are able to print to them fine through any macbook running 10.5 to 10.7. My question is, how do I make the default printer setting be Black and White instead of color? I know how to change it from Color to Black and White by navigating to the Quality menu through the Print screen but I have to do this every time I print. Is there a way to make black and white the default?
Thanks in advance,
Cheryll

You’re really going to take photos straight out of camera on a 5d3 and print them with a blindly applied B&W conversion from the printer? I would highly discourage that, but if that’s what you want to do I’m sure it’s possible. Sorry, I have no experience with that printer so I can’t help.
Do you have a laptop? My recommendation would be to use a photo processing software like Lightroom (if you don’t have it LR5 is ridiculously cheap right now), play around before the event to get a B&W conversion that you like – even the preset ones are going to be better than whatever conversion the printer does - and then print from LR. It’d hardly take any extra time, and you could get a brief review of the conversions on a laptop screen before printing.

Re-size an image in using the Image class?

Is there a way to resize an image using the com.day.cq.wcm.foundation.Image class? I wanted to extend the foundation image componet and have it resize to a specific height and width. Is there a way to change the size of the image before you call image.draw(out) ?

You also don't want to insert you resizing efforts prior to calling the image.draw method. The draw method doesn't actually render the image, it draws the HTML img tag that your components print out. If you were to use the ImageHelper to get the layer and resize it that would not actually change the size of the image.
Now that img tag will contain a URL to the image, and that URL will generally look something like this (unless you have customized your image components):
/path/to/your/page/_jcr_content/par/textimage/image.img.jpg/1323947520848.jpg
This URL is going to trigger a script or servlet that will be responsible for rendering the image. In the example above because the textimage component extends the parbase component and because URL includes the img selector it will end up triggering the servlet at /libs/foundation/components/parbase/img.GET.java. If you go into CRXDE Lite you can go to this file and look at the source code of this servlet and see an example of how it uses the layer to resize the image if that author edited the image in the smart image widget.
You can also see example of servlets that resize and image ot specific preset sizes (as you want to do) you can look at /apps/geometrixx-outdoors/components/product/image/thumbnail.GET.java and /apps/geometrixx-outdoors/components/product/image/nav.GET.java.
So what you would want to do is something like this:
Create your own component at /apps/mysite/components/foo
Create a servlet at /apps/mysite/components/foo/bar.GET.java - put your logic to resize the image here based on some of the examples
Create your component JSP at /apps/mysite/components/foo/foo.jsp
Create your component's dialog and in this dialog include a smart image widget - make sure you store your image on component node, not a sub-node. If you store your image on a sub-node you need to make sure the sub-node includes the same resource type as your main node).
In your component JSP when you create your foundation Image object make sure to image.setSelector("bar") before you call image.draw()
That should result in an image URL that looks like /path/to/your/page/_jcr_content/par/textimage/image.bar.jpg/1323947520848.jpg
Those steps aren't tested - so I may have missed something or mistyped something, but it should point you in the right direction.

Lines in the file when I scan with the ADF in the Image Class MF4770

Hi.
I am the owner of a Mulifunction Printer Canon MF4770 Image class.
When I scan a document using the ADF, I get two lines along all the page digitalized.
Is there any way to clean the ADF scaner?
why do i get this line in the file ?
I attached an example in order to you can see what I'm trying to explain.
Regards

[topic moved to Reader Touch subforum]

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
It does not look like the Canon driver has change from Mavericks to Yosemite.
If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
If you have a new or clean install of Yosemite, see > OS X Mavericks: Set up a printer

OS X 10.8 not recognizing scanner on canon image class MF4270

I have mac OS x 10.8 (mountain lion), and canon image class MF4270. Printer works fine; won't recognize scanner. I've installed the latest driver updates for my image class MF4270 from canon website, both fax and UFR II printer driver v2.43. Also have MF toolbox and Canoscan Toolbox 5.0. Nothing is working. What do I do now?
Robin Kelson
[email protected]
THank you

There is no scanning support for this model.
MF ScanGear does not support the MF42xx series. And CanoScan Toolbox is just for the inkjet-based models and stand-alone scanners.
Also, there is no ICA driver for this model so you cannot use Image Capture.
And resetting the printing system will not resolve your issue.

Images still not printing

In my program, 5 images should be printed, but it only prints one image , the last image I create. I am not sure why this happens, please help.
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.io.*;
import javax.imageio.*;
import javax.swing.*;
* This class demonstrates how to load an Image from an external file
public class Image1 extends JComponent {
public Image1(String x, String y, int p) {
try {
    img[p] = ImageIO.read(new File(x + y + ".gif"));
} catch (IOException e) {
    e.printStackTrace();
BufferedImage[] img = new BufferedImage[6];
int z;
public void paintComponent(Graphics g) {
     for(int i = 1; i < 6;i++){
     g.drawImage(img, 0, 0, null);
g.drawImage(img[2], 100, 0, null);
g.drawImage(img[3], 200, 0, null);
g.drawImage(img[4], 300, 0, null);
g.drawImage(img[5], 400, 0, null);
public Dimension getPreferredSize() {
if (img[1] == null) {
return new Dimension(100,100);
} else {
return new Dimension(img[1].getWidth(null), img[1].getHeight(null));
public static void main(String[] args) {
JFrame f = new JFrame("Load Image Sample");
f.addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent e) {
System.exit(0);
          Card crd = new Card();
          crd.makeBlank();
          for (int i = 1; i<=5; i++){
          crd.makeCards();
          String y = crd.getSuitAsletter();
          String x = crd.getValueAsnumber();
          System.out.println(crd.getValueAsnumber()+ "," + crd.getSuitAsletter() );
          f.add(new Image1(x, y, i));
f.pack();
f.setVisible(true);

So why did you start a new posting? You already have a posting on this topic:
http://forum.java.sun.com/thread.jspa?threadID=5143911
People don't know what has already been suggested if you keep starting new discussions.

Am trying to insert new cartridge in Image Class D530. Toner cover will not close after insertion?.

I am trying to insert new toner cartridge in Image Class D530 laser printer. After insertion of cartridge, correctly I think, the toner cover will not close. What am I doing wrong?

Hi Sparrow.
What is the model number of the toner cartridge that you are experiencing issues with? The imageCLASS D530 supports the Canon Cartridge 128.
Please follow the instructions below to insert the toner cartridge. Ensure that both sides are level as you are inserting the cartridge in the machine:
1. Verify that the orange tabs and sealing tape have been removed.
2. Insert the toner cartridge.
Fit the protrusions (A) on each side of the toner cartridge into the guides located on each side of the machine. Slide the toner cartridge into the machine, until the toner cartridge meets the back of the machine.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon Image Class MF8180c

After a lifetime of PCs I have made the switch to an iMAC!! I just set it up and everything is pretty easy, however, I just encountered a problem. I have a CANON Image Class MF8180c that is a multi-function machine and less than a year old. I have discovered that this printer is not supported in the MAC OS system (I went to the canon site)
Does anyone know if there is some king of workaround?

Hi szfaber, and a warm welcome to the forums!
It looks like scanning is out...
http://www.hamrick.com/vuescan/vuescan.htm#canon
It looks like everything is out...
http://discussions.apple.com/thread.jspa?messageID=6209676

Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500. HP says to go through Preview, Image Capture, or Print/Scan in System Prefs. Still doesn't work. Any ideas/similar experiences?

Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?

Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell.
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here.

Can't get photoshop elements 12 to print multiple copies of an image with one print job? what to do?

Can't get photoshop elements 12 to print multiple copies of an image with one print job

How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.

Image Class multifuntion Printer MF4150

Similar Messages

Maybe you are looking for