Image (Co. Logo) in Template header appears but not in Topic when viewing a topic which is attached to the Template

I have an image (Co. logo) placed in the header of a
template. Topics are attached to the template. I also have a
separate page that has hyperlinks to the the Topics in the several
books I have in the project.
When I generate (WebHelp) project and view the output, here
is what I see:
If I open any topic by directly going to a book and then
clicking on the topic, then I see the Co. Logo/image it is supposed
to be pulling from the Template. However, if I view the same Topic
by accessing it from a navigation page in which all the Topics are
hyperlinked then the top header does not show.
I am bit preplexed with these two separate displays of the
same topic. One showing the image in the header and the other not.
Any assistance would be greatly appreciated. Thanks.

Only you will know for sure what you are dealing with, but I do not see the same complete url code in the header of the page you say has a problem. I only see the page filename linked (not http:///www..., just home.html). It may be a case of those pages not using the same template.

Similar Messages

I pod touch 5th generation was working fine died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue if it on and the apple logo is about to appear but it never does nor does anyother picture. If i hold the

I pod touch 5th generation was working fine (Not sure what the last ios i downloaded was it should be ios 8 or higher). The battery died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue as if it's powering on and the apple logo is about to appear but it never does nor do any other type of images on the screen. If i hold the home button Siri will say "Siri is not available please connect to internet" but there is still no image on the screen. I've tried holding down the home and power button it restart it but doing this just gave me the same results. How do i fix this problem? What's wrong with my i pod?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

The Header in my home page is truncated. My home page Header is cut off. The header appears in Internet Explorer, but not in Mozilla Firefox 3.6.13. How to make the header display in Firefox?

The Header in my home page is truncated. My home page Header is cut off. The header appears in Internet Explorer, but not in Mozilla Firefox 3.6.13. How do make the header display?

(Images or animations do not show) worked well.

CDATA appearing but not rendering as html...

simple XML
<products>
    <product>
           <process>Preservation</process>
          <application>Crack Filling</application>
          <rank>100</rank>
          <productType>Viscosity Grade Asphalts</productType>
          <productName>AC-20 Asphalt Cement</productName>
          <suppliers><![CDATA[<a href="#">Indianapolis IN</a>,Des Moines IA,Laketon IN]]></suppliers>
          <pdf>AMI%202007%20AC-30,AC-20,AC-15,AC-10,AC-5,AC-25,AP-3,AP-5,OAF-1.pdf</pdf>
   </product>
</products>
in dataset
var ds1 = new Spry.Data.XMLDataSet("datasets/master.xml", "products/product", {sortOnLoad: "process", sortOrderOnLoad: "ascending"});
ds1.setColumnType("suppliers", "html");
coming out in a repeat table
<tr spry:repeat="ds1" spry:odd="blue">
        <td>{process}</td>
        <td><a href="{pdf}">{productName}</a></td>
        <td>{application}</td>
        <td>{suppliers}</td>
</tr>
ISSUE
The {suppliers} info appears but none of it is rendered out as HTML. Isn't the columnType="html" suppose to eliminate this issue? From reading the board it seems that people are talking about varying issues with different versions of SPRY. Any insight on what I should be doing different here? I have // xpath.js - version 0.7 - Spry Pre-Release 1.6.1

found, the issue - there was a section further down the XSLT file that needed the disable-output-escaping adding to (below is the original section) - once updated it worked like a charm - thanks
<xsl:template name="_LFtoBRloop">
    <xsl:param name="input" />
    <xsl:variable name="beforeText" select="substring-before($input, '
')" />
    <xsl:choose>
      <xsl:when test="string-length($beforeText) = 0 and substring($input, 1, 1) != '
'">
        <xsl:value-of select="$input" />
      </xsl:when>
      <xsl:otherwise>
        <xsl:value-of select="$beforeText" />
        <br />
        <xsl:call-template name="_LFtoBRloop">
          <xsl:with-param name="input" select="substring($input, string-length($beforeText)+2)" />
        </xsl:call-template>
      </xsl:otherwise>
    </xsl:choose>
</xsl:template>

Charging icon appears but not recognized by computer help!!!

Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
What's going on???
HELP!!!!

Have you tried a different cable?
This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
MJ

Drag and drop not working. When trying to move a cell or icon the shadow of the cell or icon being moved appears under the cursor but can't be released causing a freeze of function within the program. Happens in finder numbers and firefox

Drag and drop not working. When trying to move a cell or icon the shadow of the cell or icon being moved appears under the cursor but can't be released causing a freeze of function within the program. Happens in finder numbers, firefox, and when trying to move any file from the downloads folder.
This is a serious pain.
Please help.
WB

Yes, all I can tell you is that Finder does not have that function in ML. Your system is "working as expected".
You can file feedback here.

I have deleted my iCloud app from my iPad and cannot get it back. I've reset the home screen, everything else appears but not that

Not sure if I had to submit my question:
I have deleted the iCloud app from my iPad and cannot get it back. I've reset the home screen, everything else appears but not that

There isn't an iCloud app, I'm not sure what it is that you have deleted, but it isn't iCloud.

I can hear sound though my head phones but not though the speakers on my iPad how do I fix it

I can hear sound though my head phones but not though the speakers on my iPad how do I fix it

Or ... If you can hear music in the Music app without the headphones, you may have system sounds muted.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

HT201406 I purchased a new iPad 3. When viewing Facebook photos a white ring in the center of the photo appears randomly. I can move photo around with finger and one ring stays in center of screen even on blank part of screen. Help.

Has anyone experienced a white ring ( like a Cheerios or life saver candy shape) frozen in center of screen when viewing Facebook photos? You ca move the picture around with your finger, even minimize it and the ring is in the center of the screen. It is random not on all photos as you swipe through them. Could be on any profile photos. When you click done and go back into photos it disappears on the photo or photos that had it previous , but may sow up again on other photos . Again it's a perfect shaped white ring in center of screen. Only on Facebook.

Not familiar with that but it is worth trying a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

HT1338 I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system?

I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system? If they could not do it right the first time I do not have much faith in their advice.

Assuming you've done a system wide search for it including the Applications folder and it's not there......
I think you will need to address this with them - did you pay them for the application? Or was your purchase price to include it? And the question(s) to ask them:
If the app store states that it has been downloaded, ask them where it is and which Apple ID they used. (the store keeps track of Apple IDs and machine IDs on everything you download).
I have absolutely no faith in their advice; however, in this case, it's not so much technical advice, but an answer to your questions: you paid for something and it appears not to be there.

Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

I have ALL the exact same symptoms as on my home computer.
It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

Graphics convert but not text even when ocr is disabled

graphics convert but not text even when ocr is disabled

Hmmm... I seem to have found the plist file that is doing it. I was looking at /Library/Application\ Support/Apple/Remote\ Desktop/ before... looks like /Library/Preferences/com.apple.ARDAgent.plist is the culprit.
This plist is a binary, so I had to use plutil to convert to xml in order to make it human readable. I wonder if I can just hack this file up a bit and re-deploy it to each machine. Or I wonder if it would re-build if I simply remove it from each client. I will need to test to find out, seeing as though the task servers are listed in it, probably not a good idea to remove it all the way.

Image (Co. Logo) in Template header appears but not in Topic when viewing a topic which is attached to the Template

Similar Messages

Maybe you are looking for