Image colors depend on the computer that publishes my Domain file?!?!

Here's a weird one... First, the setup.
My site is published from two different computers both using iWeb '08, using the same Domain.sites2 file that's passed from computer to computer using my idisk. The Domain file is always copied down to a local computer before new changes are made and published. Recently, I've noticed, that publishing from one of the computers (but not the other) results in overly intense colors, especially in the red tones. This I tested by accessing my site with Safari and opening one of the overly intense images. Leaving the browser page open, I then republish my site using a different computer, accessed the page again... and the images is normal! On screen you see the previously published image beside the newly published image, and the color deffirecenes are obvious, even though the same file was being published without modification.
Can anyone think of why this is happening? I can't imagine iWeb treating the publishing of images differently from computer to computer, unless there is some other weird computer-dependent processing going on.
Thanks for any ideas!
John
aking the same Domain file, and without replacing the

Unfortunately, the issue is not with which pages get published (that works fine), but with the amount of color in the images that are published.
Imagine this...
You have a JPEG photo of a sunset that is stored on an idisk. The photo is downloaded to Computer A, placed onto a page in iWeb, and published to the web. Here, the photo appears on the web site as one would expect (blue sky, subtle oranges and reds, some purples). The Domain.sites2 file is then copied onto the idisk.
Now, on Computer B the Domain.sites2 is downloaded from the idisk, and opened in iWeb. A change is made to the page (not a change to the photo) and the site is republished. When visiting the site a sunset still appears, but the blue sky is now really, really blue, and the subtle oranges and reds are now intensely red. It would appear that a significant amount of contrast and saturation has been added to the photo.
Something about publishing is different on Computer B.
Here's some additional interesting data.
The original photo file is 1024 x 656 pixels and 391K in size.
The photo is sized in iWeb to be 605 x 388.
After the initial publishing from Computer A (the one in which the image looks fine), and upon investigating the Site folder created on MobileMe, the photo file has been resized to be 605 x 388 and now occupies 108K. After publishing from Computer B (where the image is contrasty and oversaturated), the dimensions of the file are still 605 x 388, but the size of the file when published from Computer B is 111K, so the file as published from Computer B is clearly different.
I'm guessing that this has something to do with how iWeb treats rescaling an image on one computer (or, maybe, version of Mac OS X or Quicktime?!?!) to another.
Does this sound familiar to anyone?
Thanks!
John

Similar Messages

  • Why are my movies not showing on my Mac Book, which is the computer that I used to purchase the movie, but showing on my IMAC at home...I am currently deployed.

    why are my movies not showing on my Mac Book, which is the computer that I used to purchase the movie, but showing on my IMAC at home...I am currently deployed so this ***** a bit. Also how do I keep this incedent from happending in the future?

    No, this is not the case. I know where i purchased the movie and I also know movies cant be added to the cloud such as music, TV shows can.  The instance happened during the dowload. I think that depending which computer is up and running and the bandwith allocated on either network, which ever computer that finishes first is the one that gets the movie. Just a thought. So next time I will ensure my IMAC is not running. I think that fixes it.
    Thanks

  • We are having some problems viewing wide format drawings in safari on the ipad - The images view fine on the computer... Any ideas?

    We are having some problems viewing wide format drawings in safari on the ipad - The images view fine on the computer... Any ideas?

    No, the site isn't Flash-based; it's a site I've visited on the phone dozens of times. This problem only started occurring a few days ago.
    I'm embarrassed to admit that the site is Popsugar.com, a celeb gossip site that I visit whenever I'm bored.

  • ColumnChart color depending on the value of the column

    Hi,
    I'va been trying for 2 days to change the colors of columnseries in a columnchart and it is actually awful. I've tried to do it inline without custom itemRenderer but I quickly understood that it is impossible. I then looked on the internet, and found that it was maybe possible by creating a custom itemRenderer class, extending ProgrammticSkin and implementing IdataRenderer.
    I have tried but am not at all able to retrieve the value of the column inside the itemRenderer. Even more, the so called _chartItem is always null and never never carries anything from anyparent.
    I'm a bit exhausted of trying and getting this value, so if you have some idea, i'll be very grateful.
    Here is the code for my itemRenderer class:
    import flash.display.Graphics;
        import flash.geom.Rectangle;
        import mx.charts.ChartItem;
        import mx.charts.chartClasses.GraphicsUtilities;
        import mx.charts.series.items.ColumnSeriesItem;
        import mx.controls.Alert;
        import mx.core.IDataRenderer;
        import mx.graphics.IFill;
        import mx.graphics.IStroke;
        import mx.skins.ProgrammaticSkin;
        public class ColorRenderer extends ProgrammaticSkin implements IDataRenderer
            public function ColorRenderer():void
                super();
            private var _chartItem:ChartItem;
            public function get data():Object
                return _chartItem;
            public function set data(value:Object):void {
                _chartItem = value as ColumnSeriesItem;
                invalidateDisplayList();
            private static const fills:Array = [0xFF0000,0x00FF00,0x0000FF,
                0x00FFFF,0xFF00FF,0xFFFF00,
                0xAAFFAA,0xFFAAAA,0xAAAAFF];
            override protected function
                updateDisplayList(unscaledWidth:Number,unscaledHeight:Number):void {
                super.updateDisplayList(unscaledWidth, unscaledHeight);
                var g:Graphics = graphics;
                g.clear(); 
                g.beginFill(fills[(_chartItem == null)? 0:_chartItem.element.y]);
                Alert.show(_chartItem.index.toString());
                g.drawRect(0, 0, unscaledWidth, unscaledHeight);
                g.endFill();
        } // Close class.
    } // Close package.
    Thank you

    It worked, thanks
    Date: Wed, 21 Apr 2010 09:03:14 -0600
    From: [email protected]
    To: [email protected]
    Subject: Flex ColumnChart color depending on the value of the column
    Have you looked at doing per-item fills?
    http://help.adobe.com/en_US/Flex/4.0/UsingSDK/WS2db454920e96a9e51e63e3d11c0bf69084-7c3f.ht ml
    This feature lets you define a function that customizes chart item fills based on their values.
    >

  • My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

    My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, I can't buy the app because it says we need to update the software. The thing is, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

    HELPPP ME BEFORE CHRISTMASS MORNING!!

  • The computer that I original used with my ipod touch is dead, so I am now synching and backing up to a new computer.  I had to restore the software to this ipod.  I can drop and drag my tunes back into the ipod, but not my apps.

    The computer that I originally used with my ipod touch is dead, so I am now synching with another computer.  I had to restore the software of the ipod, I am able to drop and drag my tunes back to the ipod but not my purchased apps.  I have no problem doing this with other ipods that I have synced and backed up to this computer.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Remote Desktop Connection cannot verify the identity of the computer that you want to connect to.

    I had a Windows 2008 server which was upgraded to 2012.  Now RDC doesn't work and I get the following message:
    Remote Desktop Connection cannot verify the identity of the computer that you want to connect to.
    RDC works on the server because I can reach it via other windows machines, just not my Mac any more.  I suspect it is a certificate issue but I can't find it in my key chain.
    Any suggestions?

    Hi,
    You might want to follow the below Thread which best suits the current scenario
    https://social.technet.microsoft.com/Forums/itmanagement/en-US/2bc873ed-6c11-4767-8ce3-4df8549aff20/remote-desktop-connection-cannot-verify-the-identity-of-the-computer-that-you-want-to-connect-to?forum=winservergen
    Hope this helps !
    Regards,
    Sowmya

  • The computer that I used to sync my Ipad with crashed.  How can I copy the pictures from my Ipad to my new computer?

    The computer that I used to sync my Ipad with crashed.  How can I copy the pictures from my Ipad to my new computer?  When I try to use Picassa to import them I can only see the 'Camera Roll; folder but I have several other folders with hundreds of pictures in them

    To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a PC you can use the windows camera wizard
    To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

  • The computer that I first used to download iTunes is no more. I have a new computer that I set my wife up on.  While I can see all my music in the iTunes library I cannot sync my iPod

    The computer that I first used to download iTunes, to buy songs and to sync my iPod Nano to iTunes is no more.  I have a new computer that I inadvertently set my wife up on.  When I sign in, while I can see all my music in the iTunes library, when I tried to 'sync', I have lost all my music in my iPod and I now have my wife's library on there instead.
    I subscribed to iTunes Match, thinking that this would help.  It hasn't and I'm not happy!
    I have arranged to take my iPod into an Apple store next Tuesday but isn't there something you can tel me to do that ties my iPod wth my music and leaves my wife's music for her iPod?  Please help, I am so frustrated and have wasted so much time on this, reinstalling iTunes, restoring my iPod....
    Can anyone help? 

    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
    Check out the following KB Articles:  http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
    http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer

  • HT4113 I no longer have access to the computer that my ipod is sync'd to and my phone is disabled, having forgotten my password. What can I do to resolve?

    I no longer have access to the computer that my ipod is sync'd to and have forgotten my password so the device is disabled. How do I resolve this?

    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • I recently changed jobs and no longer have access to the computer that contained my Firefox bookmarks. I don't have a Firefox profile. Is there any way to find and transfer my bookmarks to my new computer?

    I recently changed jobs and no longer have access to the computer that contained my Firefox bookmarks. I don't have a Firefox profile. Is there any way to find and transfer my bookmarks to my new computer?

    If you don't have access to the old computer any longer, '''no'''. Unless you were using something like the Google Toolbar & Google Bookmarks or Xmarks, which would have your bookmarks in an online account that you could access. Firefox doesn't include an online storage feature for personal data, yet. That is coming in a future version.
    If you have a friend at your old job maybe they have access to that old PC and they could export your bookmarks to a file and email that file to you.

  • I have a nano 5th gen bought new. I no longer have the computer that I registered it w and created music library on. I want to allow my new computer and itunes to sync w my nano w/o losing the music on it. When I try it tells me i

    I have a nano 5th gen which I bought new. I no longer have the computer that I sync'd it with and created library on. I have new computer and Itunes library which I want to sync w my nano and songs on it. When I try it tells me I will loose all the songs on my nano bc Im already sync'd on a dif library. How do I keep from loosing all my songs?

    Your iPod is designed to sync with only one iTunes library at a time.  If you try to sync it with a new or different iTunes library, it will erase what is currently on the iPod and replace it with what is in the new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • HT1766 How can I backup the iPad to the non-C drive of the computer that runs the itune?   I have already setup the library at a NAS and seems only media file are stored int he library.  iPad backup still need to take use my C: drive that is running out o

    How can I backup the iPad to the non-C drive of the computer that runs the itune?   I have already setup the library at a NAS and seems only media file are stored int he library.  iPad backup still need to take use my C: drive that is running out of space

    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
     Cheers, Tom

  • If I upgrade to Mountain Lion on the computer that will install it, will my WIFI still work on the computer that cannot be upgraded? I know this is a very basic question

    If I upgrade to Mountain Lion on the computer that will install it, will my WIFI still work on the computer that cannot be upgraded? I know this is a very basic question. Trying to hold out as long as I can, but purchasing an iPhone for Christmas and new iMac next year when warrently expires.

    Thank U very much for the quick reply, I wanted to upgrade this weekend, but still on the fence. I can live with the software that is not compatible, they are on another compuetr, just didn't want the obvious stuff to stop working.

  • HT1212 i don't have the computer that my iPod was registered to and i forgot my password because i just found my phone after being lost for 2 years

    i don't have the computer that my iPod was registered to and i forgot my password because i just found my phone after being lost for 2 years. Idk what to do so i can access my ipod.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • Update object returned by a business method in stateful session bean

    I have a business method in stateful session Bean returning an Object "myObject getObject()". This object can be modified by the client. Is it necessary at the end to notify the bean about the changes with some kind of business method "setObject(Obje

  • Minimum requirements for home server

    I am looking to get a cheap iMac, Mini or iBook to use as a home server to run iTunes 24/7. I will be attaching an external HD for storage space for my media and will stream wirelessly to Apple TV over 802.11g using an Airport Express. What would be

  • 1163R... What is the best way to use the 1163R.

    I need to record voltage on the SCXI 1121 as soon as the 1163R is switched. What is the best way to do this.

  • How can i edit APN settings on 4s

    how can i edit APN settings on 4s

  • Magnetic Lasso Tool Question/Suggestion

    Hello: I've been suing the magnetic lasso tool to make a selection of a group of people; there is a lot of going between legs and over heads, etc.  But invariably when I get about half way through the selection the magnetic lasson tool acts as if I'v