Image cut off when printing from snipping tool

I am using the snipping tool that is part of Microsoft Windows 7. Thank you for your help.

Hey , Welcome to the HP forums! I understand that you are experiencing issues with cut off images on your Windows 7 PC before printing to your Envy 7640. I can help you with that, however I am not quite sure what program you are using that has your snipping tool. If you let me know what program you are using I can make sure we get you pointed in the right direction to resolve this.

Similar Messages

Top of image cut off when printed

I used Aperture to print a borderless 4x6 on borderless paper. In the print preview, the entire image was there (a close-up of Detroit Tiger Verlander with his hat on). Then I printed and the top 10-20% of his hat was cut off.
But then I ordered an online print through Aperture of the same photo just as I set up to print from my printer. The print was sent to me without being clipped at the top.
Anyone know why this clipping happens when I print the picture? I quadruple checked all the settings.

You may want to check on the printer driver and paper size selected

How do I get my watermark not to get cut off when printing from aperture?

When I export an image that I have put my watermark on and print it the water mark gets cut off in the printing

Aperture should scale watermarks down to fit the exported image. Perhaps it is scaling to one dimension and not both?
Have you tried resizing your watermark? I suggest creating a watermark for each commonly used export size. I use a wide and not tall watermark, in these widths (in pixels):
- 320
- 640
- 1024

Text getting cut off when printing to PDF from Excel

Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:20:28 -0700
From: [email protected]
To: [email protected]
Subject: Text getting cut off when printing to PDF from Excel
Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy
>

Image gets cut off when printing tiles

My InDesign file includes an 8" x 28" page containing a full-bleed image that prints as 4 tiles of 8.5" x 11". Whenever I print, the image does not print on the first tile. The foreground text and vector graphics print fine. The image is a PSD, but I've also tried flattened TIFs and JPGs with the same results. Even if I make the page twice as big so nothignbleeds, the image doesn't print on the first tile that should contain the image.
Any suggestions? Thanks

Thanks for the ideas.
I thought about printing from a PDF, but I couldn't find a way to print tiles in Acrobat. I'll see if I can print to tiles as a PDF. I also will see what happens if I place a PDF into the InDesign file, then print that.
I didn't log in as a different user, but I did open on another computer, with same results.
Never heard of .inx, but I'll try that too.
Some new twists:
1) When I flip the page orientation upside-down in the print dialogue box, the opposite happens - the last image tile doesn't print.
2) Today I printed the page at 50% and it worked fine with all image tiles printing correctly.

Notes cut off when printing, issue with margins

When I print a slide with notes, the notes complete cover the width of the page, flush left and right. My printer cuts the margins automatically (not a bleed), so those portions of the text in the notes gets cut off.
Any way to control the margins, left and right, when printing notes from Keynote?

Keynote print layout is a bit of a mess, and is well commented on by users, it prints differently than previous versions, eg in handouts the slide image is much smaller than previously, in grid, the slides are off the printable area on the left.
We are hoping this is fixed in the round of scheduled updates.

HP Laserjet P1102w - Right side margin cut off when printing in Internet Explorer 9! URGENT PROBLEM*

Hi,
I have just purchased a new printer (HP Laserjet P1102W), and when I print a web page in Internet Explorer 9, the footer (I set to the URL) does not print at all and the header will print though the right hand edge of my entire web page is cut off (including my top right header - Pages ? of ?).
I always use Print Preview first, and in the print preview it looks perfect. I always tick the box to enable shrink to fit too. Why will it look perfect in 'Print Preview' but yet when it prints, it cuts off the right hand side edge of the page and doesnt print the footer?? I have tried adjusting margins, etc... all to no avail.
I would like to check whether others have this same problem?
I spoke to HP (UK Printer Support) and they said it is Internet Explorer 9's problem. I have left a message on the Microsodt Web forum which you can see here. http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista/internet-exploer-9-not-printing-header...
I am hoping they may release a patch / hotfix - but this has to be affecting many other users of this printer too? The more of us that complain, the quicker it will get sorted.
Any others with the same problem?
Thanks.

I spoke with Microsoft technical support via phone today. Between us - we seemed to have found the problem.
It's to do with the DPI (the font size) settings in Windows!?
I have mine set to 188% on my Windows Vista mahcine and 200% on my Windows 7 laptop.
From my Printing tests in Internet Explorer 9...
at 100 % DPI – it prints perfectly
at 150% DPI – it prints perfectly
at 200% DPI – the right side of the margin is cut off, and no footer is printed – despite it looking perfect in the Print Preview.
I am using http://uk.msn.com/ as my test print outs.
This indicates when the DPI is changed above 150%, IE9 doesn't print properly – though other browsers like Safari or Firefox do print correctly. This surely has to indicate a bug in either the Windows operating system or Internet Explorer 9?
Microsoft are going to run their own tests and phone me back tomorrow...hopefully with a solution!
Hope this helps any others with the same problem at the moment!
Would be great if HP could provide a soloution asap - surely a tweak to the Printer dirvers will fix the problem?

Photo getting cut off when printing

I am trying to print a 6x4 photo with my HP Photosmart B8550. Everytime I go to print it, it cuts off part of the picture. I created the picture in Photoshop at 6x4 and saved it as a jpg. In the preview it shows up fine but it is NOT right when it prints. Please advise.

StephF wrote:
I am trying to print a 6x4 photo with my HP Photosmart B8550. Everytime I go to print it, it cuts off part of the picture. I created the picture in Photoshop at 6x4 and saved it as a jpg. In the preview it shows up fine but it is NOT right when it prints. Please advise.
The edges of your image will be cut off by a printer that can’t print all the way to the edges of the paper. In order to prevent this, go to the Image Size menu again and decrease the height by 1 inch (thus also reducing the width). When printed, the image will be centered on the paper. You can also choose “Scale to Fit Media” In Page Setup.
Although I am an HP employee, I am speaking for myself and not for HP.

Left side of reports are being cut off when printed.

The leftmost character is being cut off some reports when printed. I have added the following to the registry on the report server but it still is cutting off the the left side of some reports.
REPORTS_ADD_HWMARGIN = YES
I am also getting a blank page after each printed page.
Edited by: user1065650 on Jun 22, 2010 11:35 AM

Any change the OS changed?
For example we were running 6 and everything was Windows.
On 10 the Report Server in on Linux and we had to play with the Fonts some to make it work.
We change the uifont.ali file
Its a long shot but in that file under these sections here what I have it it helps (Please make a copy first)
In the file /u01/app/oracle/product/midtier/guicommon/tk/admin/uifont.ali there are several issues.
First under “Mapping from MS Windows”
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
Arial = "arial.ttf"
#Arial = helvetica
"Courier New" = courier
"Times New Roman" = times
Modern = helvetica
"MS Sans Serif" = helvetica
"MS Serif" = times
"Small Fonts" = Helvetica
The lines in bold have been added.
Next under “Support for Far Eastern Languages”
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
#itcadvantgardegothic = arial
#"ITC Avant Garde Gothic" = arial
#itcadvantgardegothic = Arial
#"ITC Avant Garde Gothic" = Arial
itcadvantgardegothic = Helvetica
"ITC Avant Garde Gothic" = Helvetica
# Required
#itcadvantgardegothic = Arial
#"ITC Avant Garde Gothic" = Arial
The lines in bold have been added
Finally under “PDF:Subset” everything is commented out.

How to make images searchable (OCR) when printing from Word 2007 to PDF with Acrobat 10

Good Day, I have checked several forums and the help file, but I can't seem to get a straight answer on this issue.
Our office creates many documents in Microsoft Word 2007 that contain both typed text AND images. For example, I have a document with a summary section and then a .jpg of an event from Facebook. We usually Print the document using Adobe PDF and the resulting PDF is searchable with the Find tool. The problem is that the images contain text and we want that to be searchable as well. I found posts saying to take the PDF and Print it again as an image and then run the Recognize Text tool. I have tried this and it does indeed work, although the resulting PDF is grainy looking (even at 600 dpi).
What I would like to know is if there is a way to get the images to be searchable during the conversion from Word to PDF. I could educate my co-workers on how to do this and save the trouble of having to touch each document more than once. Also, I do not like the graininess of the image nor the extra steps involved to convert each document. It will require a lot more hands on maintenance than I have time for.
Any assistance or clues you can provide on this topic would be appreciated. Thank you in advance, Paula C.

Thanks so much for your reply.
Paula F. Cutrone
Lead Crime Analyst
Onondaga Crime Analysis Center
511 S. State Street, Room 205
Syracuse, NY 13202
tel (315) 442-5645 x5062
fax (315) 442-5646
***CONFIDENTIALITY NOTICE***
Information contained in this e-mail is confidential and may be privileged and exempt from disclosure. If the reader of this message is not the intended recipient, the reader is hereby notified that any dissemination, distribution, or copying is strictly prohibited. All information contained within should be considered law enforcement sensitive unless otherwise noted. If the reader has received this in error, please immediately destroy all copies and attachments and notify this office by replying to this e-mail or by calling (315) 442-5645.

Color off when printing from iPhoto if photo was scanned in.

When I scan a photo to a file or into an application and try to print from iPhoto, the colors are off. Usually darker than they appear in the photo. If I do a direct print from the scanner to the printer the colors look normal (OK). Any idea if there is some type of adjustment for this?

What color profile do the pics have? Is the printer set to the same profile?
Regards
TD

16:9 video sides cut off when exported from After Effects

When I export a 16:9 video from After Effects, the sides are cut off in the exported clip. I've tried different export settings and and my composition settings are correct, from what I can tell. Does anyone know why this could be happening?
Thanks!

and my composition settings are correct, from what I can tell.
But are they really? We cannot know, because you don't say anything about your exact render settings and comp settings, which is what is required here. You could be using an unsuitable CoDec or even crop your output inadvertently by using a specific output module setting....
Mylenium

Apple TV Cuts off when streaming from iTunes

Since a couple days ago, when I stream a TV show I have brought from iTunes directly to watch it works fine but every 8 - 9 minutes, without fail it will cut off and say the iTunes store is not avaliable. I then simple press play again and it starts again, but then 8 - 9 minutes later the same thing happens? Does anyone know a way to fix this?? It's very frustrating when you're watching an hour long TV show and it cuts off 6 or 7 times!!
Thanks.
P.S. It worked fine until a couple days ago.

its something on itunes part, like lantzn said we all been trying to get them to help us
if you stream from your library---- works fine
if you stream from netflix-----all is fine
if you stream from itunes store ----whatever you are watching will cut off after 8min 59 sec
you can resume but just 9 min later the same thing happens again.
I have spent 2 days trouble shooting the issue with Apple care, I even opened a new Apple tv I got for my family room which is doing the same thing, I reset my settings, I refreshed my network still the same problem
today on a return call I got from apple care they agree its on itunes end, so he made a call or chat whatever they did to the tech support at the itunes store dept and they gave him the same as I got from express lane, everything is fine on their end....its not!
they told him to tell me its my network ...its not! I have 2 xbox consoles and they both work fine when I stream videos, I have no issue with anything on my Apple tv such as youtube or netflix or my library
jus the store.
there are so many complaining on this exact issue and they need to understand
the coomon issues we all have
started on the 19th of this month
itune store cuts off after 8min and 59 sec
it can resume but will cut off after 8min and 59 sec
can watch netflix with no problems
can use my library to stream with no problems
it could be a server issue or update but the new apple tv I opened was 4.4.3 and it had the same issues as the one I been using which is 4.4.4
The only thing I can suggest is if you have the Apple care on your Apple TV is to call over and over and let them know this is happening because if they get the calls then hopefully someone will keep contacting the itune store support and fix it.
itunes support told apple care to go to a store and have them test it on their network
Honestly, I can not make it to the genuis bar at a apple store for a bit because I was in a car accident and can't walk on my leg, so trust me I was looking forward to watching a bunch of movies, I could but the resuming after every 9 min blows.
so frustrated but im calling apple care again in the morning.

Brochure template right-side edge gets cut off when printed

its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
comments are hidden (that helped a little)

With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
MacBook Pro Mac OS X (10.4.9)

Header cut off when printing

Whenever I print a document, the header is cut off. How do I fix this?

One thing you might want to do is to update software i.e. - 10.6.8 is the latest version of that software and now there are more current updates for the OS.
Did you drag it to the print module as I remember all you need to do is click on print (upper right)
Make sure you are using the right paper and setting all the way thourout the chain.

Image cut off when printing from snipping tool

Similar Messages

Maybe you are looking for