Image Date error on importing TIFF images from Disk

I have thousands of high quality (~100 Mb each) images in 20 folders on a 1 Tb hard drive. I have been using Bridge to manage the images, adding some metadata such as keywords and copyright data. I am considering importing all these images into Aperture and using it as the primary image management tool.
But I am concerned about an apparent bug in the way Aperture handles the "image date and time".
In Bridge (and GraphicConverter), the "image date" field is correct, directly from my CFV digital back on the camera and inline with the time of day the shot was taken (e.g. sunrise image at 6am). When I import the image into Aperture, the time gets shifted by 14 hours.
For example, an image in Bridge that correctly shows Date Created as 10/05/2009 7:36am gets distorted to 10/05/2009 9:36pm, exactly 14 hours later than the correct time. It was taken at 7:30 in the morning but, in Aperture, looks like it was taken in the late evening. It does not look like a time zone issue as the image was taken in the same time zone as my Mac Pro is set to.
I have tried deleting the masters and re-importing them with GMT +2 and GMT -12 in the two time zone adjustment fields. This gets the right time into the Image Date field but then the image has the wrong time zone data in the "Camera Time Zone" and "Picture Time Zone" fields.
I have tried running MetaData > Update Date and Time (with Master files ON) but it comes back with an error "no master files were adjusted ... because they have a format that does not permit modification".
I have tried running MetaData > Update Date and Time (with Master files OFF). It appears to work but I assume that the underlying file in the Aperture library still has the incorrect time.
Have others faced this problem? Is there a solution? Is it a known bug that Apple might fix one day?
Regards
Peter

I am seeing a very similar problem when importing TIFF files back to Aperture.
This is what I do and what I see:
1. I import RAW images from my camera into Aperture. They show the correct date and time.
2. I open an RAW image in Photoshop (CS4) directly from the finder. The image inside Photoshop (file/info) shows the correct date and time.
3. After editing I save my image as 16bit TIFF and it still shows correct date and time.
4. I import the new TIFF back into Aperture. The time is shifted back 15 hrs!
I can then go in and Metadata/Update Date and Time (no masters) and it works well, but it is a pain to do on each image I process.
In all cases camera and image timezone is set to US Pacific as it should be.
To me this seems like Aperture is somehow miss-interpreting the timezone when reimporting TIFFs.
I have not tried importing JPEGs or PSDs back but I will and will report back...

Similar Messages

Bad Image Data Error!

Hi,
I'm doing a project for a my class doing a simple sunrise/sunset program. I've noticed that if I either create simple images in fireworks and import them, or even images form the web, I get an error message saying "Bad Image Data Error!" and all the images turn to red squares.
Any ideas of how to fix this? I don't want to have create images in flash.
Thanks,
Avi

Oh and I forgot to add....I've experience this problem on both CS3 & CS4. Tried it on my desktop and laptop, both are Windows 7 64bit.

Importing .tiff images

I am importing .tiff images on multiple layers. How do I make the white background on each .tiff image transparent?

ASk in the Id forum and provide exact system info, versions of PS, details about your files and so on. There is an issue with legacy color profiles in some cases, but beyond that I'm not aware of other problems that may be relevant here.
MYlenium

Error while importing an RFC from R/3

Hello,
I am getting the following error while importing an RFC from an R/3 system in the Repository:
***Ready for import***
Import started...
/XXX/YYY_CREATE_NOTIFICATION:
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: PERMISSION_ERROR
Import failed with 1 error
Does any one know what is required? Is it missign authorizations on the R/3 side or on the XI side?
Thank you,
Sumant.

Hi,
please check your User (used for importing RFC) authorizations,
it should have RFC authorization .
Thanks,
Madhav
Note: Points If Useful.

ORA-29400: data cartridge error/IMG-00703: unable to read image data error

Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
ORA-29400: data cartridge error
IMG-00703: unable to read image data
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 75
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 65
ORA-06512: at "ORDSYS.ORDIMG_PKG", line 37
ORA-06512: at "ORDSYS.ORDIMAGE", line 927
is raised when the following trigger is processing certain JPGs (example). Other JPGs are handled as expected:
create or replace trigger photo_size_trg
before insert or update on photos
for each row
declare
photo_width integer;
begin
-- Check to see if the new photograph is different from the old one...      --
if dbms_lob.compare(:old.photo, :new.photo) != 0
then
    -- ...if so, check to see if it's wider than the desired 250 pixel        --
    -- maximum...                                                             --
    photo_width := to_number(ordImage.getMetadata(:new.photo)(1).extract('/ordImageAttributes/width/text()').getStringVal());
    if photo_width > 250
    then
      -- ...and if so, apply an image transform that will resize to the photo --
      -- to a maximum of 250 pixels wide, keeping the original aspect ratio. --
      -- There doesn't seem to be an elegant way of specifying a constraint   --
      -- in one dimension like this, so the height is specifed as a large     --
      -- enough value to cover all practical contingencies.                   --
      ordImage.process(:new.photo, 'maxScale=250 10000');
    end if;
end if;
end;Any thoughts/suggestions?

hi,
I am getting following error,kindly help me out to rectify this ..
thank you
ORA-29400: data cartridge error
ORA-00600: internal error code, arguments: [kokbCollTerminate], [13], [], [], [], [], [], []

Error while Importing .bmp Images

Hello All,
I'm getting an error when attempting to import a bitmap (*.bmp) image file into Flash Professional CS6. I tried both "Import to Library" and "Import to Stage" and they both throw the same error...
This is the Error I get when attempting the import:
"One or more files were not imported because there were problems reading them."
After searching around online I found a few examples of people getting similar problems when importing stuff but none of those were for impoting .bmp images.
Any idea why I can't do this?
Any thoughts or suggestions would be greatly appreciated!
EDIT:
I just tried downloaing a .bmp from the internet and was able to successfully import that, but still can't import the one I actuallty want. The bitmap that I want to import is one that I created using Gimp 2.8 and had to "export" it to .bmp format from Gimp's xcf file format...
Thanks in Advance,
Matt

Hey sinious, thanks for the reply!
Ok I'll just use the PNG format then... I was only trying BMP because I read that it had the bast image quality. I've been using PNG format for ALL my Frame's Backgrounds, but some of the Text that was part of the PNG Image (*i.e. part of the background image) looked choppy after importing it into my Library and setting it as the Frame's background. But it looks fine when viewing the image with any other "Image Viewer" type program.
Might be that it just looks a little choppy when "testing" the movie, by hitting Ctrl+Enter...
EDIT:
Ok, so I just Published it and viewed it on another PC (*I have it setup to be able to be viewed from anywhere in the network using the flashpolicy file stuff) and it seems to look better after its Published... Maybe the quailty isn't as good when debugging/testing the movie...?
Thanks Again for your reply, much appreciated!
Thanks,
Matt

Why am I getting data error lines in my image when it loads in LR 4?

I have LR 4. When clicked to enlarge an image (a RAW image) it took a moment to load, (as usual) but when it finished there were multicolored strait horizontal lines in it. What is not working correctly? Is it Lightroom? Is it my external hard drive? Is it my computer? I know there can be SD card errors, but I don't think that's it since I think it has happened to pictures that were okay on the card. I think it is happening between my computer, external hard drive, and lightroom since I think I have seen this error appear on photos I have viewed in LR pre-error, and then the errors appeared. If any one knows the source of this problem that would be appreciated! This could be a dangerous problem if it happened to a valuable photo.

The above muskrat photo was one of a series of 9. Just now I transfered the 9 from my external hard drive to my computer, and then imported them into lightroom. Now, of the 9 that I imported to LR from my computer (copies of the originals that are stored on ext hard drive) 3 of them have lines. Only one of the series have lines on my ext hard drive. So it it a growing issue inside my ext hard drive > computer hard drive> Lightroom system. Does that give any more helpful information to work on?

Feature Request: Functions to read image data, and write to tiff or jpeg.

Functions that render image data and make it available to plugins before writing to disk would facilitate writing plugins that take rendered image data into consideration. Also, if the aforementioned image data could be subsequently written to disk possibly after a bit of modification, it would open up a whole new world for plugins.
Plugins don't need to access the mid-rendering stages in the raw conversion / rendering pipeline, but having a shot at post-rendered, pre-written to disk image data would allow pixel manipulating export plugins to be written. A set of image file manipulation methods would be a decent work-around, providing the ability to read/write tiff/jpeg files.
Rob

Well, I'm replying to my own question!
I solved the problem by reading the data from my card, then using Flatten Pixmap to create a pixmap from my data array, then using Draw Flattened Pixmap to create a picture to send to a 2D Picture. This works fine.
Now, how can I change the Pixmap into Image so I can save to an AVI?

Error while importing Still image.

I searched the data base and found a similar question but it wasn't answered.
I'm running PE 10 on a Mac (O S 10.6.8) with 4GB of RAM and lots of disk space.
First attempt importing a stitched photo (panorama) from LR3 as a .TIF; got this error message - Error: The importer reported a generic error.
Went back to LR and converted to .JPG
Second attempt importing same photo as .JPG format; got this error message - Error: File video dimensions (width/height) too large.
Does anyone know what the limitations are for importing photos into PE 10? I've never had this issue with iMovie.
Thank you.

If you want PRE to be responsive you should follow Steves' recommendation to resize to 1000x750 (SD).
At the technical level I think the maximum allowable dimensions are 4096 x 4096 - but PRE will struggle with pictures that size.
Cheers,
Neale
Insanity is hereditary, you get it from your children

InDesign crashing when importing tiff images

I have upgraded to InDesign CC 2014. I have trouble importing some tiff images. InDesign crashes. Not all tiff images create problems. It depends on which version of Photoshop, they are saved in. If I open the image in Photoshop and saves again, there are not any problems. Our database is very large and contains several folders, so it is a big task to archive all images again, even if I create an action in Photoshop. I have searched, but I can not find any settings in InDesign that helps. Does anybody else has encountered this problem and found a solution?

ASk in the Id forum and provide exact system info, versions of PS, details about your files and so on. There is an issue with legacy color profiles in some cases, but beyond that I'm not aware of other problems that may be relevant here.
MYlenium

After 10000 images, Aperture begins to importing new images out of order

Hi All,
I'm at about 13,000 images and from time to time I noticed that whenever I imported images after 10,000...Aperture at that point had begun the numbering sequence over again, some of the images would wind up next to its identically numbered image say from a year ago. In other words, Aperture is sorting by image number instead of by date even though I've selected date.
Now it is happening all the time and all the new images (after 10,000) are finding their home somewhere within the catalog of images instead of at the very end.
I thought I was going to be able to resolve the issue quickly by selecting the 'sort by image date' but that does not fix it. I've tried sorting the dates in an ascending and descending order but nothing I try fixes the sequence. I desperately need to get my images back into chronological order. Any idea?
Thanks,
Tyler
Message was edited by: orehek

orehek -
Are you renaming the images on import? and if so, which preset are you using? Aperture doesn't have its own naming system otherwise. It uses the file names as the version name.
Also, as another poster asked, which view are you using to view them all at once? All Photos? You can't have more than 10K versions in a single project I believe but I don't see how that could contribute to the weirdness you are seeing.
As for why sort by date doesn't work, that makes no sense. Unless what you actually have is correct, ie, you have duplicate images in your library, that rightly have the same date and name, so the sorts reflect that. Or you have made new versions from your existing images - those would also sort like that. Can you give us some more details/examples?

Error while importing the Entries from Payroll

Dear Guru's
For the First time we are Import the Entries from Payroll , Request End with the Warning message
when i check the Out Put file lot of Errors
eriod Error Codes
EP01 This date is not in any open or future enterable period.
EP03 This date is not within any period in an open encumbrance year.
EP04 This date is not a business day.
DOHA COA Journal Import Execution Report Date: 21-APR-12 10:16
Concurrent Request ID: 424967 Page: 11
========================================================== Error Key ===========================================================
Period Error Codes
EP05 There are no business days in this period.
Unbalanced Journal Error Codes
WU01 Warning: This journal entry is unbalanced. It is accepted because suspense posting is allowed in this ledger.
EU02 This journal entry is unbalanced and suspense posting is not allowed in this ledger.
EU03 This encumbrance journal entry is unbalanced and the Reserve for Encumbrance account is not defined.
Flexfield Error Codes
EF01 This Accounting Flexfield is inactive for this accounting date.
EF02 Detail posting not allowed for this Accounting Flexfield.
EF03 Disabled Accounting Flexfield.
EF04 This is an invalid Accounting Flexfield. Check your cross-validation rules and segment values.
EF05 There is no Accounting Flexfield with this Code Combination ID.
EF06 The alternate account is invalid.
WF01 An alternate account was used instead of the original account.
WF02 A suspense account was used instead of the original account.
Foreign Currency Error Codes
EC01 A conversion rate must be entered when using the User conversion rate type.
EC02 There is no conversion date supplied.
EC03 A conversion rate type or an accounted amount must be supplied when entering foreign currency journal lines.
EC06 There is no conversion rate for this currency, conversion type, and conversion date.
EC08 Invalid currency code.
EC09 No currencies are enabled.
EC10 Encumbrance journals cannot be created in a foreign currency.
EC11 Invalid conversion rate type.
EC12 The entered amount must equal the accounted amount in a ledger or STAT currency journal line.
EC13 Amount is too large.
ECW1 Warning: Converted amounts could not be validated because the conversion rate type is not specified.
Budget Error Codes
EB01 A budget version is required for budget lines.
EB02 Journals cannot be created for a frozen budget.
EB03 The budget year is not open.
EB04 This budget does not exist for this ledger.
EB05 The encumbrance_type_id column must be null for budget journals.
EB06 A period name is required for budget journals.
EB07 This period name is not valid. Check calendar for valid periods.
EB08 Average journals cannot be created for budgets.
EB09 Originating company information cannot be specified for budgets.
Encumbrance Error Codes
EE01 An encumbrance type is required for encumbrance lines.
EE02 Invalid or disabled encumbrance type.
EE03 Encumbrance journals cannot be created in the STAT currency.
DOHA COA Journal Import Execution Report Date: 21-APR-12 10:16
Concurrent Request ID: 424967 Page: 12
========================================================== Error Key ===========================================================
Encumbrance Error Codes
EE04 The BUDGET_VERSION_ID column must be null for encumbrance lines.
EE05 Average journals cannot be created for encumbrances.
EE06 Originating company information cannot be specified for encumbrances.
Reversal Error Codes
ER01 A reversal period name must be provided.
ER02 This reversal period name is invalid. Check your calendar for valid periods.
ER03 A reversal date must be provided
ER04 This reversal date is not in a valid period.
ER05 This reversal date is not in your database date format.
ER06 Your reversal date must be the same as or after your effective date.
ER07 This reversal date is not a business day.
ER08 There are no business days in your reversal period.
ER09 Default reversal information could not be determined.
Descriptive Flexfield Error Codes
ED01 The context and attribute values do not form a valid descriptive flexfield for Journals - Journal Entry Lines.
ED02 The context and attribute values do not form a valid descriptive flexfield for Journals - Captured Information.
ED03 The context and attribute values do not form a valid descriptive flexfield for Value Added Tax.
Miscellaneous Error Codes
EM01 Invalid journal entry category.
EM02 There are no journal entry categories defined.
EM04 The value in the ACTUAL_FLAG must be "A" (actuals), "B" (budgets), or "E" (encumbrances).
EM05 The encumbrance_type_id column must be null for actual journals.
EM06 The budget_version_id column must be null for actual journals.
EM07 A statistical amount belongs in the entered_dr(cr) column when entering a STAT currency journal line.
EM09 There is no Transaction Code defined.
EM10 Invalid Transaction Code.
EM12 An Oracle error occurred when generating sequential numbering.
EM13 The assigned sequence is inactive.
EM14 There is a sequential numbering setup error resulting from a missing grant or synonym.
EM17 Sequential numbering is always used and there is no assignment for this ledger and journal entry category.
EM18 Manual document sequences cannot be used with Journal Import.
EM19 Value Added Tax data is only valid in conjunction with actual journals.
EM24 Average journals can only be imported into consolidation ledgers.
EM25 Invalid average journal flag. Valid values are "Y", "N", and null.
EM26 Invalid originating company.
EM27 Originating company information can only be specified when intercompany balancing is enabled.
EM29 You do not have access to this ledger and account combination.
EM30 This balancing segment value is not valid for this ledger.
EM31 This management segment value is not valid for this ledger.
** Batches listed under "Unbalanced Batches**" have not been imported.
Edited by: 912775 on Apr 21, 2012 1:00 AM

Hi Bharat17an,
Please provide the detail information when create the MySQL connection in your PowerPivot model. Here is a good article regarding "how to Use MySQL and Microsoft PowerPivot Together" for your reference, please see:
http://www.datamensional.com/2011/09/how-to-use-mysql-and-microsoft-powerpivot-together-2/
If this issue still persists, please help to collection windows event log information. It maybe helpful for us to troubleshoot this issue.
Regards,
Elvis Long
TechNet Community Support

Error in importing the tables from database

HI ,
while importing the table from the metada by using OCI call 10g/11g i am getting the below exception:
*"Some objects are not imported because of invalid names : (DESCRIPTION =(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)))"*
i am getting this exception after selecting the objects which i want to import from the database.....it first imports the tables and the throws the above exception and then removies from the repository view.
How can i get this resolved???

Hi,
I'm also hitting this problem, did anyone solve this, I'm not able to import any data to the repository, error message is: -
*"Some objects are not imported because of invalid names"*
Thanks,
Mike

Error when importing IDOC structure from SAP - Control record missing

Hi!
We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: <b>Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found</b>. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, Duncan

Hi Duncan,
Taka a look at these threads which address similar issues:
Error during import of FIPARQ01 Idoc
Error during IDoc Import
Importing idocs:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
Hope these help!.
Cheers,
Chandra
Message was edited by: chandravadhana gopalakrishnan

Error when importing CO Hierarchies from R/3 DEV to R/3 QAS

Dear SDN,
I am getting the following error when importing Cost center and cost element hierarchies from R/3 DEV to R/3 QAS...
Object OSOA 0COSTCENTER_0101_HIER has not yet been imported successfully
Object OSOA 0COSTELMNT_0102_HIER has not yet been imported successfully
Ended with Return code ===8...
But The two hierarchies were available in R/3 QAS and also i am able to utilise..
My doubt is if i transport these hierarchies from R/3 QAS to R/3 Production any major issues...
Now i want to test a data in BW DEV from R/3 Production data...
So, I am planning to transport These hierarchies from R/3 QAS to R/3 PROD...
Here we do not have BW QAS...So, getting data from R/3Production to BW DEV and testing...
After testing Directly use in BW Production...
So, Please suggest me why when importing these hierarchies errors occuring???
Help will be greatly appreciated with points...
Thanks in advance...

Hi Venkat,
Please go through the following threads...
Hierarchy Transports
Transporting cost center and profit center standard hierarchies
/community [original link is broken]://Transporting a hierarchy
Transport Hierarchy
Khaja

Image Date error on importing TIFF images from Disk

Similar Messages

Maybe you are looking for