Image Deployment Changes Windows Update from Windows and MS Update to Just Windows Only

Before capturing an image I make sure that Windows update is set to update "Windows and other products from Microsoft Update". After and capturing and deploying the image I notice on the client machine it has been set to Windows only. There
is nothing in the TS that I know of that would switch this....I am not running any updates or anything in the TS. Anyone have any ideas on this? Thanks in advance

Sysprep changes this setting before the image is captured. This is normal behaviour.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

Is there a way to remove installed updates from the App Store update window? I keep getting an alert that I have an update for Apple Remote Desktop. It says its installed, but the alert and the app keep showing up. Annoying!!

Is there a way to remove installed updates from the App Store update window? I keep getting an alert that I have an update for Apple Remote Desktop. It says its installed, but the alert and the app keep showing up. Annoying!!

Spotlight: How to re-index folders or volumes
http://support.apple.com/kb/ht2409
Mac App Store: Cannot update App Store purchases or updates do not seem available
http://support.apple.com/kb/TS4236
If re-indexing the spotlight doesn't fix it,we can try a few other tricks.

I try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?

i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
please what i do

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

HT3986 i purchased windows 7 from amazon and i just received it. they sent me windows 7 home premium "OEM System Builder Pack". the instructions say "Intended for system builders only". also says " must be per installed on the hard drive of a fully assemb

i purchased windows 7 from amazon and i just received it. they sent me windows 7 home premium "OEM System Builder Pack". the instructions say "Intended for system builders only". also says " must be per installed on the hard drive of a fully assembled computer system, using the OEM Preinstallation kit (OPK)."

System Builder - just be sure to get 64-bit version, no one needs or wants 32-bit today, and only comes with one, while retail ships with both 32/64-bit media.
you can't install it and activate on different hardware later is all, and by then for what you saved, so what, Windows 8 or SP2 will be out.
A few people had trouble with Windows 7 SP1 for some reason and not sure exactly why, changes to the boot loader on the DVD I presume.

[svn:osmf:] 14372: PARB changes: Remove metadata from MediaContainer and LayoutTargetSprite constructors.

Revision: 14372
Revision: 14372
Author:   [email protected]
Date:     2010-02-23 15:17:18 -0800 (Tue, 23 Feb 2010)
Log Message:
PARB changes: Remove metadata from MediaContainer and LayoutTargetSprite constructors. Instead, metadata is set on LayoutTargetSprite via a non-public setter used by the framework. Update a bunch of ASDocs, make some enum classes final, remove elementIDs from sample apps (since they rely on metadata, and we want to keep samples focused on the public API).
Modified Paths:
    osmf/trunk/apps/samples/framework/MediaContainerSample/MediaContainerSample.as
    osmf/trunk/apps/samples/framework/NestedMediaContainersSample/NestedMediaContainersSample .as
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as
    osmf/trunk/framework/OSMF/org/osmf/containers/IMediaContainer.as
    osmf/trunk/framework/OSMF/org/osmf/containers/MediaContainer.as
    osmf/trunk/framework/OSMF/org/osmf/elements/compositeClasses/CompositeDisplayObjectTrait. as
    osmf/trunk/framework/OSMF/org/osmf/layout/HorizontalAlign.as
    osmf/trunk/framework/OSMF/org/osmf/layout/ILayoutTarget.as
    osmf/trunk/framework/OSMF/org/osmf/layout/LayoutMode.as
    osmf/trunk/framework/OSMF/org/osmf/layout/LayoutTargetSprite.as
    osmf/trunk/framework/OSMF/org/osmf/layout/VerticalAlign.as
    osmf/trunk/framework/OSMFTest/org/osmf/containers/TestMediaContainer.as
    osmf/trunk/framework/OSMFTest/org/osmf/layout/TestLayoutRenderer.as
    osmf/trunk/framework/OSMFTest/org/osmf/layout/TestMediaElementLayoutTarget.as

[svn:fx-trunk] 8786: Minor updates from Sujata and Min for fxgutils.

Revision: 8786
Author:   [email protected]
Date:     2009-07-23 21:10:35 -0700 (Thu, 23 Jul 2009)
Log Message:
Minor updates from Sujata and Min for fxgutils. Addresses an issue where FXG files with a matrix display differently after running through FXG to FXG. Also includes a fix to stop processing of unknown fxg tags in skipped sections.
QE: No
Doc: No
Checkintests: Pass
Reviewer: Min and Sujata
Modified Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/filters/AbstractFilte rNode.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/transforms/MatrixNode .java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXGSAXParser.java
    flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXGSAXScanner.java

This is a duplicate post. This should be locked to avoid further confusion.
My CSS wont change
Nancy O.

My Photoshop Elements serial number is not working? The CD says it is for Windows XP/ WIndows VISTA...and my currest OS is Windows 7? Is that the issue

My Photoshop Elements serial number is not working? The CD says it is for Windows XP/ WIndows VISTA...and my currest OS is Windows 7? Is that the issue?

This is a question for the Photoshop Elements forum: Photoshop Elements. A moderator may find and move this to the correct forum for you.
Benjamin

I'm from India and after update i can't turn off my 3G or i have the option to turn on/off LTE only. I don't want to be always on 3G because my battery is running out of life.

I'm from India and after update i can't turn off my 3G or i have the option to turn on/off LTE only. I don't want to be always on 3G because my battery is running out of life.

This is the same as what happened to customers in most of the rest of the world in a past release, and it's because carriers want to stop supporting older transport methods.
There's nothing you can do about it other than complain to your carrier, as they're likely the ones who asked Apple to remove the option.

Three updates from the same Software Update Group showing as unknown, while all the others are showing as expected.

Hi
I have an issue from Septembers security updates where three updates from the same software update group are showing as unknown status rather than required / not required / installed etc.
There are multiple other updates in the same update group and they are all displaying correctly with the figures I would roughly expect.
I would have expected if something was wrong with the clients not returning software update scans that all the updates in this software update group (all deployed automatically as part of the same ADR) would show the same status of unknown, rather than just
three of them.
The updates in question are: KB2894842, KB2972215 & KB2977629 (First two .net 4.0 and last one IE11).
Now these updates would largely be not required in our organisation as for the most part we use different versions so I would expect them to show as not required.
Short of kicking off a mass software update scan cycle I don't know a) why this has happened b) if a scan cycle will fix it. Our clients scan every week and its been several weeks since the updates were deployed, that and the other updates have all reported
back in.
Anyone have any ideas? Its making the compliance results look quite poor :(
Thanks
Jonathan

Hi,
Is there any clue in the logs? Please review WUAHandler.log.
What is the code you get when you run compliance report, like that in the following thread:
http://social.technet.microsoft.com/Forums/en-US/becda545-4a5e-4ea3-bd83-8c7026767af5/software-update-compliance-report-showing-status-unknown?forum=configmanagerdeployment

No windows 7 or 8 on my Dell PC just windows vista. How do I download the free U2 cd with no icloud icon? Site says it requires windows 7 or 8??

No windows 7 or 8 on my Dell PC just windows vista. How do I download the free U2 cd without having windows 7 or 8? Site says icloud requires windows 7 or 8???

iCloud is a different set of features from iTunes in the Cloud.
To download your copy of the album go to iTunes Store > Quick Links > Purchased > Music > Not in my library. You should find the album there. Click the cloud symbol to download.
tt2

On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for ios4.3.3 but now the apps don't work at all after updating. They just flash on the screen but don't stay displayed. What is going on?

On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for IOS4.3.3 but when the update was complete the apps would no longer work. They would just flash when I tapped the screen to bring them up but will stay displayed. What is the problem?

I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3

Updated iPhone 4S and during update phone returned to factory settings

I Updated iPhone 4S and during update phone returned to factory settings

If you have a backup restore from that. read http://support.apple.com/kb/HT1766 on how to restore

I have an older iMac G5 I updated the computer and itunes updated now it doesn't work because it needs a newer version of quicktime and the computer won't let me Can anyone help

I have an older iMac G5. I updated the computer and itunes updated also. Now it won't come up It wants a updated quicktime. The computer isn
't letting me do that. I need an older version of itunes. can anyone help?

iTunes 10 works with Leopard on a PPC Mac if you have Quicktime 7.7 available here:
http://support.apple.com/kb/DL761

Download the Update from WSUS and install it while rebooting the Windows 7

HI All,
Do we have any command to install the
already Downloaded Update from WSUS while rebooting the Windows 7 client machine
As per the group policy it will download and notify the user to install, but we need the command or script to install it while rebooting
Any comments or Idea...?
Thanks
Balaji

Hi,
Please take a check into the following thread and see if the marked answer(the powershell commands) would help:
How to install approved WSUS updates via
PowerShell or other method.
Best regards
Michael Shao
TechNet Community Support

How to update from WSUS 3.2 SP2 running on Windows 2008 R2 to WSUS 4.0

Hello, with WSUS 4.0 already in the market, is it adviseable to update from WSUS 3.2 SP2? I am looking at a bare installation of WSUS 4.0 in Server 2012 R2, from basic looks I have not seen yet anything different. We have 12 WSUS servers
servicing a wide area, and before going ahead with any update of this infrasturture I would like to know of anyone has gone this upgrade path yet? Thanks
Shahidul

is it adviseable to update from WSUS 3.2 SP2?
I don't think it's critical to upgrade to WSUS v6 at this time, unless your WSUS v3.2 server is still running on a 32-bit system (or any form of WS2003). If you're running WSUS v3.2 on WS2008/WS2008R2 (x64), then those platforms will continue to be supported
until 2020, so there's no immediate need. However, if you're contemplating a major migration of all systems to Win8/WS2012 environments, then it makes sense to migrate the WSUS server also. If you expect to have Win7/WS2008R2 systems online for the foreseeable
future, then WSUS v3.2 x64 will continue to meet your needs.
I am looking at a bare installation of WSUS 4.0 in Server 2012 R2, from basic looks I have not seen yet anything different.
The most notable difference is a much richer PowerShell interface, so if you're inclined to use PowerShell to manage WSUS, that would be an advantage.
A notable disadvantage is that you can only partially manage a WSUS v6 system from a Windows 7 workstation: Local publishing requires that activity to be performed from the same generation of system. For example, WSUS v6.3 can only be published to from a
WS2012R2 or Win8.1 system; WSUS v6.2 can only be published to from a WS2012 or Win8.0 system. This is due to internal dependencies on the BUILD number of the WSUS API.
I suspect the dependency was a manifestation of protecting WSUS v2 and WSUS v3 systems back in 2007 (local publishing was first introduced in WSUS v3.0), but with SIX possible builds of WSUS now available, it's becoming a major PITA!
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Image Deployment Changes Windows Update from Windows and MS Update to Just Windows Only

Similar Messages

Maybe you are looking for