Image display QUALITY controll bar/change/modifi

Hello
the bridges display quality of jpegs and raw images is awfull!!!
i see blockiness in all of my images, how can i watch my photos like this??
there is no crispness!
u should made a picture display quality controll bar like speed-------quality
so the user can select!

Frosti,
This request has been made many times. The development team are aware of the need for 100% previews. However, such a feature, if provided, will not be available until at least Bridge 2. Based on previous upgrade cycles that would be late 2006, at earliest. In the meantime you might consider providing more information on the type of images you're trying to preview (i.e. Raw, JPG, etc).
Also, I would suggest that you soften the tone of your comments otherwise you'll find yourself with Read Only access.
IanLyons
Forum Host

Similar Messages

Image display reference control still not working

Has anyone looked at the Image Display referece control bug? I still can't pass an image display reference to a sub VI since the front panel control in the subVI generates this error:
"The control requires an external library for its operation. This library is not installed, is not installed to the correct location, or is not loadable, or the library's version is not high enough."
I know there's some cludgy ways around it (passing panel reference, demoting reference class to 'control' and back), but it seems like such a simple thing to fix that would already have been fixed unless no one's working on it.
Attachments:
ImageRefError.vi ‏37 KB

Hello eaolson,
Unfortunately, this bug (CAR# 3R1F8KRJ) has not been fixed in LabVIEW 8.5. The attached VIs, however, do provide a workaround. The main VI contains an Image control. The sub VI has a Generic Control Reference Input to which the Image Control Reference is wired. In the sub VI, a "to more specific class" function is used to get the full properties list for an Imagecontrol.
Please note that, according to R&D, this workaround is ineffective when built into an executable.
I apologize for the inconvenience this bug may cause. We are aware of the issue and working to resolve the problem.
Best Regards,
T. McCarty
Attachments:
Main.vi ‏40 KB
sub.vi ‏10 KB

Can I apply more than one keyword to images from the Control Bar?

I swear this used to work. I select multiple images in a project. I apply a keyword to the selection by clicking a keyword button on the Control Bar. It gets applied to all the selected images. I click another keyword - it gets applied to only the first selected image.

Michael, thanks for that quick response! Yes, that was it. Of course I don't know why I would have selected that option. It would seem to make sense to put this option in the Preferences instead of Edit - it would make it less easy to change accidentally.
Regards,
Francis.

Display quality in Editor

I am a new user of PSE 8 and
have the following problem:
The image display quality is noticeably poorer in the Editor compared with the same image quality in organizer and a number of other jpg display programs(eg. Windows live photo gallery, Canon editing software). The effect is slightly washed out and lower contrast images. This was particularly noticeable working with old scanned black and white photos.
I am running 64 bit windows 7, Nvidia graphics, 23 inch Samsung hi def LCD monitor.
Any suggestions?

Originally posted by: d.kleinrath.inode.at
Thanks Anthony,
You mean that implementing a way to save higher quality image files also=
=
means that the resolution of the diagram needs to be changeable as a =
whole? So one should be able to insert higher quality bitmaps into the =
diagram once this is fixed?
Dieter
> Hi Dieter
>
> This is https://bugs.eclipse.org/bugs/show_bug.cgi?id=3D139574
>
> Cheers...
> Anthony
>
>
> "Dieter Kleinrath" <[email protected]> wrote in message
> news:op.ujhu5xe8pj7es5@ben-f9ea5088efe...
>> Hi,
>>
>> Is there any way to change the resolution of a GMF diagram so I can
>> display and print high quality images in my editor?
>>
>> When I create a default editor the resolution of a Din A4 diagram see=
ms =
>> to
>> be about 1000x700 pixel (~85 DPI). This is a very low quality for
>> displaying/printing images so I'd like to use diagrams with 300 DPI o=
r
>> more in my editor.
>>
>> Thanks for your help,
>> Dieter

Keyword control bar disappears

I have been having a problem with the Keyword control bar disappearing every time I quit and relaunch Aperture.
When I enter the keyboard shortcut, it will reappear, but none of my custom keyword buttons show up.
If I go into "edit", my custom settings show up in the lists, and then they reappear in the control bar.
Is this a toss Prefs situation?
If I do that, what do I risk losing in the way of Library or Metadata information?
Any other ideas on how to get my settings to "stick"?
Thanks!

I managed to fix this problem (I hope) by adding a new keyword to an image using the control bar entry field.
When I did this, it said the keywords were locked, and did I want to unlock it and add it to my custom list.
Why Yes, I did.
Since then it has been working as usual.
I noticed there is also an icon in the editing dialog box which allows you to lock the list. It may be possible to accomplish the same behavior from in there.
I had never locked this manually, so assume it was changed during a Library rebuild, or update somehow.
Good luck!

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes how do I make the layers and tool bars bigger? Please help@

Windows will scale applications display or windows will not scale application display depending on how the application is coded. Photoshop is coded in a way that its display is not scaled by windows. Photoshop knows about your displays high pixel count not its resolution so it uses its pixels however it does not scale its UI to make it usable on your display. Other application let Windows scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels. The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays 2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
The reg update and external manifest file effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution. Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768. Photoshop UI would not fit on the Surface Pro 3 display..
Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display 3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimet

Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
Thanks

I have same issue - have you solved this yet?

Imaq Image Display Control - Zoom tool - zoom factor changes slowly

Hi at all,
we have a strange behavior with the zoom factor of the Image Display Control in an Labview executable.
Ususally by clicking into the image with the zoom tool activated, the zoom factor changes from 1,2,4,8,16, ... ("x2")
Now we have one PC, where it changes from 1,2,3,4,5,... ("+1")
Has anyone an idea on which windows setting this behavior depends on? The PC runs with Windows XP SP3, the LV-Exe was built
with LabVIEW 8.5.1 and the Vision Development Module 8.5.0. Is there any regsitry setting where I can adjust the "click intensity" or
something like that? Or can I set a property of the image control to force a specific behavior?
Actually I have never seen this behavior before, I only know the half/double mode.
In the software the operator has to search for fiducials on PCBs what means he has to click several times into the image.
Changing in the Mode "+1" instead of "x2" is not acceptable for him.
Thanks for your help!
Stefan

Hello Stefan,
thank you for posting at the National Instruments forum. The "Zoom Behaviour" was changed due to customer requests. I totally agree with you, that it is not the best solution to click 24-times to get the desired region of interest.
I created a small example for LabVIEW 2010, which uses a property node and event structure, to perform the zoom programmatically.
Best regards
MarianO
Attachments:
Calculate Zoomfactor.vi ‏21 KB
Image Example.vi ‏63 KB

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut of wacom pen click, i now have to click on the image title bar, how can i fix this please?

ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut or wacom pen click, i now have to click on the image title bar, how can i fix this ?

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

Video Control Bar in Flash Displays on HD but Not From Webserver

I am using Flash Pro 8 - putting FLV files in SWF files using
Flash Pro 8 and then "publishing" to Html and SWF to a location on
my hard drive.
When I display the webpage from my Hard Drive from where ever
on my hard drive I initially published to from Flash 8 Pro -
everything works fine - videos play and video control bar shows and
works.
When I publish this website to web server the video displays
and plays but NO Video Controller Bar (at bottom of the video)
shows at all.
Symptom: when I make an Html, SWF and FLA file into a folder
on my hard drive and display them in the browser the video control
bar shows. When I copy those three files into the hard drive
website in FrontPage, the video shows but the video control bar
does not.
So, I re-made the Html, SWF, and FLA files and put them
directly into the FrontPage website (on my hard drive) then
everything works fine when I use broswer (IE 6 or Firefox). z
But, when I publish the hard drive website to the remote
website hosting company, the video control bar disappears -
everything else works fine (video shows OK just no video controller
bar.)
My guess is that the SWF file has a non-relative URL
reference concerning the video control bar and when the three files
(Html, SWF and FLA) are moved to new location then that
non-relative address rears its head.
I should NOT publish from Flash 8 Pro directly to remote
webserver as it has FrontPage Extensions and does not like to talk
to FTP changes to website not coming from FrontPage client.
is my guess right? What to do?????
[email protected]

quote:
1. When I encoded the video in flash I selected one of the
pre-packaged control bars (so the user can control basic
functions). I then published an HTML and a .swf. The HTML works
perfectly however when I use Dreamweaver to insert the .swf it does
not carry over the control bar. I have tried pulling over the
control bar .swf and placing it under the video file but a HUGE
object is imported with a bunch of controls that do not work (bunch
of controls = play/pause/etc).
make sure the component skin is uploaded in same directory as
swf, movie, html
quote:
The second issue is this; the user still has to click once on
the video to use the controls... does anyone know what I am doing
wrong on the video file?
Follow directions
HERE
for getting rid of ActiveX control

Flash Player not displaying control bar: pause, stop, full screen, etc

How do I change settings to allow the control bar to appear?
Thanks.

Controls are in the "interface" embedded into the pages containing the Flash content. Flash Player doesn't "create them". It displays them based on the code received from the page. If there's a problem with the page code, or the browser isn't reading the code properly, the controls may not display.
Basically, you can't fix the web page from the player.
Does this happen with ANY videos or just certain sites or a specific saite?

Ps CS6 Request: User control over display quality versus performance (modified request)

It would be great if there was user control of the zoom threshold at which display quality is sacrificed for performance.
I mean the threshold which determines the maintaining of bit-depth in the calculation of the composite which is displayed when working with 16-bit documents, and the accuracy of displayed layer effects in documents with any bit-depth.
The threshold currently seems to be approx 64% zoom - not much of a zoom out when dealing with large images destined for print.
Please provide a control for that threshold in Preferences > Performance.

Thank you for posting, conroy. I have an example of the inconvenient effects of Photoshop CS6 allowing the zoomed-out composite to be innaccurate.
Here's a real-world application for everyone to see.
In my below example you're not seeing a 16-bit doc, just 8-bit, BTW.
Top C has Layer Styles. Bottom C is a copy that's been merged with a blank layer, to effectively "collapse" it's Layer Styles into a normal single pixel layer.
The difference is staggering. This file is a massize 28x36 300DPI (8,400px X 10,800px) poster.
So on something like this, while working and tweaking everything you work worked zoomed out so you see enough of the document to be able monitor it's evolution.
I was working at 25% zoom (depisted above) for a quite a while. Got everything good, but then zoomed in only to see that each letter actually looked like pretty bad compared to what the zoomed composite was telling me.
I had to revise all letters.
For hi-res print I guess I better get used to zooming in and out constantly, so I know what to trust.
I wonder if this issue will ever be rectified. Like Conroy suggests, maybe a setting that allows users to voluntarily sacrifice performance in favor of a more accurate composite?

Camera Image Display - changing width and height.

Ok, so I wrote this simple program, but for some reason i cant control the offsets, width and height (attributes related to the image display on front panel). When i go to MAX, i am able to change these attributes, why cant i do it in labview? Any ideas?

You need to put the width and height controls inside your loop to adjust while running.
From the image you provided, the width and height are set once outside the loop, and then you sit in the loop, so they can't be adjusted again.

I have selected not to load images automatically in OPTION of firefox, and i want to keep this option as it is. now can i display images of particular page without changing DONT LOAD IMAGE AUTOMATICALLY?

i have selected not to load images automatically in OPTION of firefox, and i want to keep this option as it is. now can i display images of particular page without changing DONT LOAD IMAGE AUTOMATICALLY? for example if i trust that image on particular page doesnot contain any adult material and safe to see that page from home, can i temparory view image on page?

-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to Tools Menu -> Options -> Content -> click '''Exceptions...''' button infront of '''Load images automatically''' -> type the address of the website on which you want to load images e.g. yahoo.com and click '''Allow''' button -> click Close
-> Click OK on Options window -> Restart Firefox
Check and tell if its working.

Image display QUALITY controll bar/change/modifi

Similar Messages

Maybe you are looking for