Image expired error for CFChart on clustered server

Hello,
I noticed the following article that responds to a problem
we're having where our CFCharts occasionally aren't displaying due
to our clustered server environment forgetting where the chart was
created:
http://www.adobeauthorizations.com/cfusion/knowledgebase/index.cfm?id=tn_19328
Currently we're running CF 6.1. Does anyone know if an
upgrade to CF7 will fix this issue?
If not, can we reinstall CF with our CFIDE directory located
underneath the load balancing system? How would that work?
I know we can use CFFile to write the chart to another
directory and then display from there, but for now that solution
seems to be out, since we don't have write privileges to our
production server.
Anyway, I'm hoping that enabling sticky sessions on our web
server, or an updgrade to CF7 will fix.
Please, any comments or suggestions.
Thanks,
Peter

Hi Kalshetty,
Please check the following link for this error, it applies to CUPS 8.x
https://supportforums.cisco.com/document/109296/error-non-defined-ims-exception-cups-8x
HTH
Manish

Similar Messages

Session expired error for single user

Hi,
I'm getting a SessionExpiredLongJumpException in our prod portal but only for one single user.
All other users can access the same page.
The defaultTrace log has a specifric time in the error message saying
'...or session has expired before Sat Jun 26 16:44:18 BST 2010' This seems very specific.
Any idea why this is happeneing?

Check your browser settings for accepting cookies from this domain, you must have tried this by now clearing all your browser cache and cookies.
try solutions beacon site where they have Oracle Apps Demo Instances for Public
http://www.solutionbeacon.com/tools_vision.htm

Configuring UBBCONFIG for Tuxedo/Q-Error for rebuild message queue server

Hi..
Am using Tuxedo10g R3 on AIX 5.3..
Am using IBM COBOL..
I need to write a program with Queue Concept in cobol,so for that i created queuespace and queue using the qmadmin command..
While configuring UBBCONFIG file, as per the document which i referred:
http://e-docs.bea.com/tuxedo/tux80/pdf/usingq.pdf
i used (pg no: 28)
TMQUEUE SRVGRP="TMQUEUEGRP1" SRVID=1000 RESTART=Y GRACE=0 CLOPT="-s myqueuespace:TMQUEUE" in the servers section but while
booting TMQUEUE failed to start.. so i went for the alternative option provided in the same document as
buildserver -o TMQUEUE -s myqueuespace:TMQUEUE -r TUXEDO/QM \
-f ${TUXDIR}/lib/TMQUEUE.o
followed by
TMQUEUE SRVGRP="TMQUEUEGRP1" SRVID=1000 RESTART=Y GRACE=0 \
CLOPT="-A"
while rebuilding TMQUEUE am getting this error:
buildserver -o TMQUEUE -s myqueuespace:TMQUEUE -r TUXEDO/QM -f ${TUXDIR}/lib/TMQUEUE.o
ld: 0711-317 ERROR: Undefined symbol: .qs_tcm_setup
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
CMDTUX_CAT:1832: ERROR: can't execute cc -brtl -qstaticinline -qrtti=all -I$TUXDIR/include -o TMQUEUE BS-23f0be.c -L${TUXDIR}/lib
/usr/Oracle/Tuxedo10g/lib/TMQUEUE.o -brtl -qstaticinline -ltux -lbuft -lqm -ltmib -lfml -lfml32 -lengine -lpthread
can anyone help me in this??
Thanks in advance..

Hi Todd,
Thanks for ur reply..
my sample program will fetch records from a table in a database and will store that in a queue and will retrieve that records from the queue.. i hope one queuespace is enough for this program.. while booting am getting these messages in the ULOG.. am i missing any step in the configuration??
230153.ibmsceai!BBL.2502724.1.0: 04-24-2009: Tuxedo Version 10.3.0.0, 32-bit, Patch Level (none)
230153.ibmsceai!BBL.2502724.1.0: LIBTUX_CAT:262: INFO: Standard main starting
230153.ibmsceai!TMS_QM.2019544.1.0: 04-24-2009: Tuxedo Version 10.3.0.0, 32-bit
230153.ibmsceai!TMS_QM.2019544.1.0: LIBTUX_CAT:262: INFO: Standard main starting
230153.ibmsceai!TMS_QM.2355258.1.0: 04-24-2009: Tuxedo Version 10.3.0.0, 32-bit
230153.ibmsceai!TMS_QM.2355258.1.0: LIBTUX_CAT:262: INFO: Standard main starting
230153.ibmsceai!TMS_QM.2568346.1.0: 04-24-2009: Tuxedo Version 10.3.0.0, 32-bit
230153.ibmsceai!TMS_QM.2568346.1.0: LIBTUX_CAT:262: INFO: Standard main starting
230154.ibmsceai!TMQUEUE.651302.1.0: 04-24-2009: Tuxedo Version 10.3.0.0, 32-bit
230154.ibmsceai!TMQUEUE.651302.1.0: LIBTUX_CAT:262: INFO: Standard main starting
230154.ibmsceai!TMQUEUE.651302.1.0: Q_CAT:1497: ERROR: xa_open() - no more process table slots
230154.ibmsceai!TMQUEUE.651302.1.0: LIBTUX_CAT:466: ERROR: tpopen TPERMERR xa_open returned XAER_RMERR
230154.ibmsceai!TMQUEUE.651302.1.0: Q_CAT:1630: ERROR: tpopen() failed, tperrno = 16
230154.ibmsceai!TMQUEUE.651302.1.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
230154.ibmsceai!tmboot.495778.1.-2: 04-24-2009: Tuxedo Version 10.3.0.0, 32-bit
230154.ibmsceai!tmboot.495778.1.-2: CMDTUX_CAT:825: ERROR: Process TMQUEUE at cicsapp failed with /T tperrno (TPERMERR - resource manager error)

How I fixed the "unsupported image format" error for RAW files

After deleting the .plist file stopped working, I decided to go ahead & reinstall Aperture and...voila--problem fixed. RAW files are again displaying without any trouble (just like they used to!)
G5 2.3DP Mac OS X (10.4)

Just an update. Restarted computer and attempted rebuilds of iPhoto library a couple more times and finally files and photos mostly recovered, except for those I had tried to open. Aperture seems to have a problem, or a host of them, dealing with RAW files, and there is no update yet for the Sony RX1R for Aperture or iPhoto. Lightroom 5, on the other hand, seems to work great with these files directly, so that will be where all photos go for now. Will iPhoto and Aperture just become old archives? It is so infuriating that Apple does not allow for simple importing and exporting compatibility with such an excellent program as Lightroom 5 just to protect their somewhat poorly supported Aperture. I've been a staunch Apple supporter and user since the 80's, but having more doubts about the direction this company is taking.

SQL reporting - An internal error occurred on the report server. See the error log for more details. (rsInternalError)

I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
    <DataSource Name="DataSource1">
      <DataSourceReference>DataSource1</DataSourceReference>
      <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
    </DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
    <ReportParameter Name="machine_id">
      <DataType>String</DataType>
      <Prompt>machine_id</Prompt>
    </ReportParameter>
    <ReportParameter Name="from_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>From Date</Prompt>
    </ReportParameter>
    <ReportParameter Name="to_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>To Date</Prompt>
    </ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
    <ReportItems>
      <Table Name="table1">
        <DataSetName>Main_Report</DataSetName>
        <TableGroups>
          <TableGroup>
            <Header>
              <TableRows>
                <TableRow>
                  <TableCells>
                    <TableCell>
                      <ReportItems>
                        <Textbox Name="textbox2">
                          <rd:DefaultName>textbox2</rd:DefaultName>
                          <ZIndex>1</ZIndex>
                          <Style>
                            <TextAlign>Left</TextAlign>
                            <PaddingLeft>2pt</PaddingLeft>
                            <PaddingBottom>2pt</PaddingBottom>
                            <PaddingRight>2pt</PaddingRight>
                            <PaddingTop>2pt</PaddingTop>
                          </Style>
                          <CanGrow>true</CanGrow>
                          <Value>=Fields!syscode.Value</Value>
                        </Textbox>
                      </ReportItems>
                    </TableCell>
                  </TableCells>
                  <Height>0.25in</Height>
                </TableRow>
              </TableRows>
              <RepeatOnNewPage>true</RepeatOnNewPage>
            </Header>
            <Grouping Name="table1_Group1">
              <PageBreakAtEnd>true</PageBreakAtEnd>
              <GroupExpressions>
                <GroupExpression>=Fields!syscode.Value</GroupExpression>
              </GroupExpressions>
            </Grouping>
          </TableGroup>
        </TableGroups>
        <Details>
          <TableRows>
            <TableRow>
              <TableCells>
                <TableCell>
                  <ReportItems>
                    <Subreport Name="subreport1">
                      <Parameters>
                        <Parameter Name="machine_id">
                          <Value>=Fields!machine_ip.Value</Value>
                        </Parameter>
                        <Parameter Name="syscode">
                          <Value>=Fields!syscode.Value</Value>
                        </Parameter>
                        <Parameter Name="from_date">
                          <Value>=Parameters!from_date.Value</Value>
                        </Parameter>
                        <Parameter Name="to_date">
                          <Value>=Parameters!to_date.Value</Value>
                        </Parameter>
                      </Parameters>
                      <ReportName>Holding_Summary_Multi_Period</ReportName>
                    </Subreport>
                  </ReportItems>
                </TableCell>
              </TableCells>
              <Height>0.25in</Height>
            </TableRow>
          </TableRows>
        </Details>
        <TableColumns>
          <TableColumn>
            <Width>10.5in</Width>
          </TableColumn>
        </TableColumns>
        <Height>0.5in</Height>
      </Table>
    </ReportItems>
    <Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
    <DataSet Name="Main_Report">
      <Query>
        <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
        <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
        <QueryParameters>
          <QueryParameter Name="@machine_id">
            <Value>=Parameters!machine_id.Value</Value>
          </QueryParameter>
        </QueryParameters>
        <DataSourceName>DataSource1</DataSourceName>
      </Query>
      <Fields>
        <Field Name="syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>syscode</DataField>
        </Field>
        <Field Name="display_name">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>display_name</DataField>
        </Field>
        <Field Name="customer_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>customer_syscode</DataField>
        </Field>
        <Field Name="account_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>account_syscode</DataField>
        </Field>
        <Field Name="machine_ip">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>machine_ip</DataField>
        </Field>
      </Fields>
    </DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
    offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
    <ReportItems>
      <Image Name="image1">
        <Sizing>Fit</Sizing>
        <Left>8.875in</Left>
        <MIMEType />
        <Width>1.5in</Width>
        <Source>External</Source>
        <Style />
        <Value>bottom_right_logo.gif</Value>
      </Image>
    </ReportItems>
    <Height>0.5in</Height>
    <PrintOnLastPage>true</PrintOnLastPage>
    <PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>

i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this

I want to install Snow Leopard Server on our MacPro (2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need to purchase another copy of Snow Leopard Server?

I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need topurchase another copy of Snow Leopard Server?

The OS disks that are shipped with a particular product
are set up so that tey will only install on that product.
It will install on any Mini of that exact vintage, but that
is all.
This is to prevent people from doing exactly what you
are trying to do. The license for OSX shipped with any
is only valid for that product. Also, Snow Leopard,
including Server, is only permitted to be run on one
computer at a time. Bottom line, unlike Lion, legally
you cannot install the same copy on multiple
computers unless some "family pack" or site license
is purchased.
Yes, you need to purchase another copy.
The copy of Snow Leopard license is here:
http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf

Error [hyt00] [microsoft][odbc sql server driver] query timeout expired

I have the below network setup:-
1. Its a simple network at my father's office at a small town called Ichalkaranji (District - Kolhapur, Maharashtra).
2. We are using private network range 192.168.1.xxx with two Windows Server 2003 Enterprise Edition with SP2 licensed copies and 15 local Windows 7 clients who are only using Server A.
3. The network is having a TP-Link Braodband Router Connected to internet with the IP 192.168.1.1.
4. Both there Windows Server 2003 Enterprise Edition with SP2 are running separate SQL Server 2005 Express with Advanced Services, you can treat them as Server A (Problematic Server with IP of 192.168.1.2)
and Server B (this is not having any issue with IP of 192.168.1.3).
5. Server A is also being used by 6 Remote users from our Kolkata office using DDNS facility through the NO IP client software which installed separately on both the servers. Kolkata remote users
do not use OR access the Server B.
6. Server B is being used by only 2 Remote users from our Erode office (Under Salem District, Tamilnadu) using DDNS facility through the NO IP client software which installed separately on both
the servers. Erode remote users do not use OR access the Server A.
7. The front end application which running separately on both the servers have been developed in VB by a local vendor at Ichalkaranji (District - Kolhapur, Maharashtra).
8. Both Servers are having the same database structure in terms of design and tables format. Only difference is that both the servers are being used separately.
9. This error OR problem is only related to Server A, where on the clients we get the message "error [hyt00] [microsoft][odbc sql server driver] query timeout expired" every now and then.
10. We have to frequently reboot the server whenever we get this message on the client machines. May be after rebooting every thing works perfectly for 2 hours / 5 Hours / may be one full day but
the the error will come back for sure.
11. Current Database back up size on Server A is around 35 GB and take around 1 hour 15 minutes daily to take the back up.
12. Current Database back up size on Server B is around 3 GB and take around 5 to 10 minutes daily to take the back up.
13. One thing I have noticed is that when ever we reboot Server A, for some time sqlsrvr.exe file will show memory usage of 200 to 300 MBs but it will start using slowly, what i understand is that
this is the way SQL Server works.
14. Both the Servers are also running Quick heal Antivirus Server Edition separate licensed copies also.
15. Server B is also running Tally ERP 9 Licenses copy which is being used locally by 15 users of Ichalkaranji (District - Kolhapur, Maharashtra) same users
Can any one help to resolve this issue. Any help will be highly appreciated.

The error message "query timeout expired" occurs, because by default many APIs, including ODBC only waits for 30 seconds for SQL Server to send any output. If no data has been seen for this period of time, they tell SQL Server to cancel execution
and return this error to the caller.
This timeout could be seen as a token that the query is taking too long time to execute and this needs to be fixed. But it can also be a pain in the rear parts, if you are content with a report taking five minutes, because you only run it once a day.
The simplest way to get rid of the error is to set the timeout to zero, which means "wait forever". This is something your vendor would have to do. This may, however, not resolve the problem, as the users may just find that the application is hanging.
To wit, there are two reasons why the query takes more than 30 seconds to complete. One is that there is simply that much work to do. This can be reduced by adding indexes or by doing other tuning, if the execution time is not acceptable. The other possibility
is blocking. That is, there is a process blocking this query from completing. This is much more likely to require attention.
It is not clear to me, whether the vendor has developed the database part as well. In this case, you should probably call the vendor's support desk to have them to sort this out.
Finally, I am little puzzled. You say that you are using Express Edition, but one of the databases is 35 GB in size. 35 GB is far above the limit for Express Edition.
Erland Sommarskog, SQL Server MVP, [email protected]

Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Serve

Hi
Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message.
Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
Server does not have a dependency on it.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
Any help please
kam
KAMEL

Hi Saurabh
Exactly I have SQL SERVER 2012
Failover Clustering in windows server 2012 with two nodes with
two instances and exactly I run them in the same server and each instance with
three drives Backup, Data and log.
KAMEL

Password expired error when connecting via AFP to a server.

Hello everyone, I am new to OSX server and have had much help from everyone here on many issues just be reading the posts. But now I have one issue that is driving me nuts and I cannot seem to fix it.
I have 10.5.8 with Open Directory and one shared folder on that server. Half the users that connect to the server via AFP (Because they have laptops and conenct remotely) get a password expired error. As a work around I have setup new accounts for them with different ID's which do work but no matter what I do, the old ones wont. I have also noticed that a user can try and connect just one time and thier account gets disabled even though we have it set to disable after 5 failed attempts.
Any help would be greatly appreciated. Thank you.

Hi
One thing you could try is to double-check the Self Signed Certificate has not expired. I've seen this cause similar problems to yours. If it has expired you'll see a Red Triangle by the side of it. Amend it and change the start date to the current date and the expiry date to sometime in the future. It makes sense to set it to 3 or more years from the set start date. There's no logical reason to leave it at the default 12 months. Especially as you'll probably forget this and not watch out for it when it's due to expire.
After you've done this you could set a Password Policy for your users to change their passwords at next login.
Tony

CFCHART only works for pie, invalid attribute: autoAdjust Error for all other types

CFCHART only works for pie, invalid attribute: autoAdjust
Error for all other types.
Im just trying to render a simple bar chart, and it works on
the developer server, but not in production.
Any tips?
Dave

It's 7.0.2
But I have not tried this yet...
ColdFusion MX 7.0.2 Cumulative Hot Fix 2
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400996
I'm worried that If I apply that hotfix, something else will
break :(
ANd I wont be able to un=do it, and I'm not able to
re-install CF if it all goes tits up.

Critical Issue - 500- Internal Server Error for request in User's Inbox

Hi,
We have developed and deployed SOA composite and custom task flow (For Customized Email notifications).[30.7.1.1 Creating a Task Flow with a Router - http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_designtf.htm#SOASE744]
When a request is generated it goes for an approval. In Approver's inbox in identity console you can see request is pending. When Approver clicks on that link to see request details error is displayed - "500- Internal Server Error "
In OIM logs I can see this:
oracle.adf.controller.ControllerException: ADFC-02001: The ADF Controller cannot find '/WEB-INF/oracle/iam/ui/soa/tfs/remote-taskdetails-tf.xml'.
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:466)
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.loadUnmutalbeMetadataResources(MdsMetadataResourceProvider.java:367)
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getResources(MdsMetadataResourceProvider.java:179)
        at oracle.adfinternal.controller.metadata.MetadataServiceImpl.getTaskFlowDefinition(MetadataServiceImpl.java:209)
        at oracle.adfinternal.controller.util.SecurityUtils.invokeURLAllowed(SecurityUtils.java:33)
        at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:210)
        at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.invokeTaskFlowByUrl(RemoteTaskFlowCallRequestHandler.java:99)
        at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.doCreateView(RemoteTaskFlowCallRequestHandler.java:64)
        at oracle.adfinternal.controller.application.BaseRequestHandlerImpl.createView(BaseRequestHandlerImpl.java:57)
        at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.createView(ViewHandlerImpl.java:95)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:831)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:422)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)
        at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
        at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
        at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/WEB-INF/oracle/iam/ui/soa/tfs/remote-taskdetails-tf.xml"
        at oracle.mds.core.MetadataObject.getBaseMO(MetadataObject.java:1408)
Screenshot of Error in Inbox:
This is critical issue for us and is showstopper for Go-Live. So any kind of help is highly appreciated.
Thank you,
Tanmay

If its Java only error then there wont be any dump in ST22.
Strange issue for you, in general if we get 500 error, there should be details of it in the same page.
You said this issue is occuring for only one user, is it getting replicated every time?
You are also seeing the same error when u login as that particular user?
Do one thing, assign him the Content Admin role and then do the preview of this iView form content admin and see if ur still seeing this error.
Regards
Yugandhar Reddy

500 Internal Server error for WD applications

Dear All
I have a very strange situation and I don´t have any idea of what to do.
Basis took the backend R/3 system down for some reasons and made it up again after some time. But now they have locked all users in our backend R/3 system as Basis is performing some task on the server.
This has resulted in all web dynpro applications that are using RFC's throwing 500 Internal server error.
All other web dynpro applications that are not dependent on R3 system are working fine.
We also have restarted the EP server as we deployed one WD application.
I'm not sure how the situation was before the restart of EP server.
In NWA i can see many error for ACCESS.ERROR: Authorization check for caller assignment to J2EE security role service.jms.default.authorization : administrators referencing J2EE security role .
Also
application Processing HTTP request to servlet finished with error. The error is: com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type is.eimskip.keywordsearchmodel.types.Zotkey could not be loaded: com.sap.dictionary.runtime.DdException: failed to create provider: User is locked. Please notify the person responsible
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:449)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:387)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:416)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.getDataNode(MappingInfo.java:83)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.initMapping(MappingInfo.java:125)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:121)
at com.sap.tc.webdynpro.progmodel.context.MappedNodeInfo.doInit(MappedNodeInfo.java:215)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:449)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:387)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:416)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.getDataNode(MappingInfo.java:83)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.initMapping(MappingInfo.java:125)
at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:121)
at com.sap.tc.webdynpro.progmodel.context.MappedNodeInfo.doInit(MappedNodeInfo.java:215)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.doOpen(WebDynproWindow.java:295)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.show(ApplicationWindow.java:183)
at com.sap.tc.webdynpro.clientserver.window.ApplicationWindow.open(ApplicationWindow.java:178)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:364)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.dictionary.runtime.DdException: failed to create provider: User is locked. Please notify the person responsible
at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:254)
at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:146)
at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:97)
at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:79)
at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
... 61 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedConstructorAccessor525.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:229)
... 68 more
Caused by: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: User is locked. Please notify the person responsible
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015)
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
at com.sap.dictionary.runtime.mdi.DataProvider.(DataProvider.java:123)
... 72 more
I believe that error will get resolved once the users are unlocked in R/3 system.
But the stituation is, we will get the system back on monday morning and I'll have no time to do anything as the business will be back in 1 hr when we get the system back.
Can you please help me to identify the tasks that I can perform and be sure that all will be normal on Monday (and I'll still be in job.)
Request your help and support.
Thanks
Vineet
Edited by: vineet vikram on Apr 19, 2008 12:41 PM

Hi vineet,
Check the following things:
(1) Specify the user names in Capital letters and try. This will help you. (this could be the problem)
(2) Test the RFC destination using the tCode SM59 and try to remote login from there.
(3) If the user is locked, you can unlock using the tCode SU01.
Regards
Vinod V

500 internal server error for only single user

Hi Experts,
Pls help me that
I am getting the problem of 500 Internal server error for a single user .
Except that user remaining users are not getting this error, They are working fine
i.e it is ESS & MSS Package all other application working fine , this iview came from Webdynpro .
Regards
Krishna

Hi Arun,
where can i check with that whether in DEV/PROD system...?
I don't have access to PROD system and SU01 system too.
Can you please guide me with the steps to get it done.
Please check the below log which is getting displayed for the User, when he is logging in.
Error summary
While processing the current request, an exception occurred which could not be handled by the application or the framework.
If the information contained on this page doesnu2019t help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUSage.java:348)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java.245)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
u2026 59 more
Please provide me any help.
Thanks in advance.
Regards,
Ponneswari A.

Timeout expired error when inserting into a mirrored server

We have 3 SQL Server 2012 servers.
All 3 SQL Server has the same database, ie myDB.
In 2 of the servers (say server A and B), myDB is mirrored, and on the 3rd server myDb is NOT mirrored.
When the program calls a stored procedure to insert a record into a table in the database, on the mirrored servers (server A and B) sometimes it takes up to 7 seconds and gave an error "Timeout expired. The timeout period elapsed prior
to completion of the operation or the server is not responding. This failure occured while attempting to connect to the Principle server." This doesn't happen all the time, but happens often enough throughout the day.
The 3rd server (that is NOT mirrored) never gives this Timout expired error.
Will mirrored server cause slowness in writing, thus causes the Timeout expired error ?
Thank you.

Since we can live with some missing data, I think we should use asynchronous mirroring instead of synchronous, do you agree ?
That may be an options, provided that you are on Enterprise Edition. As I recall, Standard Edition only has synchronhous mirroring.
There are caveats with asynchronous mirroring. One is data loss in case of a failover, which you say that you can live with. There may be more caveats, though. Unfortunately, since my role is more of a developer than a DBA, I'm not too well versed in
the details. Maybe someone else can fill in?
Can a firewall issue cause mirror latency, that in turn causes the delay in writing to the principal database ?
Firewalls and other network hiccups certainly can cause a latency.
Erland Sommarskog, SQL Server MVP, [email protected]

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

Image expired error for CFChart on clustered server

Similar Messages

Maybe you are looking for