Image Filters for InDeasin CS

I have been running InDesign CS 3.0 for years and suddenly it asks for Image Filters and Avast blocks these siting malicious files. Does anyone have a solution?
InDesign still runs on a computer that never sees the Internet.

You cannot attach to the forums, you need to come back to the web page and use the camera icon to embed the images in a post, like this:
I find it more likely thatyour unconnected machine is not suffering from Avast finding a false positive, either because it isn't running, or becasue it hasn't received the same defective update. ID would not be looking for new versions of image filters on startup. If there were any, they would only be installed as part of a program update, and there hasn't been one of those for CS3 for years. ID does load existing plugins into memory, though as it starts up, and it sounds like Avast has taken a dislike tothe image filter plugins.
In case you haven't caught the undercurrent of what I'm saying, the problem is most likely Avast, not anything to do with ID.

Similar Messages

Image filters for LabVIEW

Hi,
I'm looking for image filters in LabVIEW similar to PhotoShop or Paint Shop
Pro filters.
Do you know something about that?
Miguel.

Miguel,
The IMAQ Vision toolkit has some simple filters available. Most of them are also available in Vision Builder. However, any "high-tech" filters like the ones in PhotoShop would have to be developed from scratch.
I have some experience designing image filters. I would be glad to discuss any specific filters you are trying to achieve. I can be contacted at [email protected]
Bruce
Bruce Ammons
Ammons Engineering

Capcha image validation for registration.

can anyone help me regarding : Capcha image validation for registration in struts application using validators.

You could create a Java filter that would invalidate check-in (throw an exception). This filter could be bound to validateCheckinDate filter event.
Alternatively, you could also customize the front-end to filter files for you - see this thread UCM : filtering file formats in "primary file" check-in field

Colour filters for RGB separation?

I want to colour-separate an image to create false-colour - start with a UV-only photo matched with an RGB photo, then separate the B & G of the RGB so I can map UV to B, B to G and G to R as insects see things. The images are film, not digital raw.
First, I have to find colour filters for Elements 9, and there don't seem to be any installed. Any sources that others have used without problems?
I assume that converting each separated image to B&W then to the desired colour, then superposing as 3 layers will work, but is there a better way?

Thanks for the info -- it inspired me to experiment with this. I was amazed that I could separate the original colour image into 3 separate B&W layers and then recombine them into a full colour image. One thing I found is that the colourized B&W layers need to be combined using the "Screen" mode, not "Multiply".
Just for the helluvit, I faked an insect's vision of a flower using the OP's layer replacements. I don't have a UV image of the flower, so I used PSE's "Infrared effect" in the B&W conversion dialog. That effect is certainly not the same as a UV image, but will have to do for this experiment. When comparing my result with images on the Web that created a false colour image of insect vision, I saw that I needed to add a Brightness/Contrast layer at the top of the stack, with the Brightness set to -100 and the Contrast set to -50. Here's what I ended up with:
Original:
False colour (insect vision):
I, too, am curious to see the OP's results.
Thanks again for the inspiration!
Ken

Image Optimization for POD

Attempting to optimize a few images for a POD book, but consistency in image quality is the perrenial problem with POD. Received the first proof copy containing 24 black and white 7cm x 7cm images, all from the original publisher (we're doing a licensed translation) and seemingly of consistent qualitiy. 4 images turned out brilliant, and the rest, beyond mediocre, just inferior.
The photo files are EPS. All are showing as grayscale except for 2 which are color space RGB (Adobe RGB profile). Of those two, one is terrible like the majority (flat, washed out, looks almost solarized) and the other is brilliant. The other 3 images printing well, are in grayscale, so RGB doesn't seem to be conclusively part of the answer or problem.
All the rest are grayscale, and in ID the profiles show as NA.
Other than abandoning POD (impossible now, and past projects with similar images have turned out well), what can be done, what are the fundamentals of image optimization for this printing process?
Thank you for the input.
Luca

I assume that by POD you are referring to Print On Demand?
Quite frankly, the “problems” would seem to be more an issue of GIGO – Garbage In, Garbage Out – than anything to do directly with the file format of the images, especially if those images are monochrome.
I would strongly agree with Bob Levine in terms of EPS (Encapsulated PostScript) being an archaic file format. That having been said, a properly prepared photographic image with proper exposure, contrast, and resolution saved as EPS from Photoshop and placed in InDesign should render no differently than a TIFF, JPEG, or PDF (depending upon the compression used in the EPS) image without any ICC profiles placed into an InDesign document. I seriously doubt that simply converting your EPS files to TIFF would help in any way whatsoever, although in the process of simply opening the images in Photoshop, you might see what the real quality (or lack thereof) of the images is.
Many problems associated modern day monochrome images today is the fact that most such images were shot digitally as color images as opposed to being shot on black and white film. Unfortunately, there is no single conversion of color to monochrome that is optimal for all images. Much depends upon the exposure, light contrast, and especially the color contrasts within the original color image. In the days of analog film photography, professional photographers often used color filters with black and white film to deal with the issues of color contrast (for example, yellow and orange filters for outdoor scenic shots to provide for a darker sky with deeper contrast with the clouds, the “big sky” effect). Converting color digital images to monochrome by using the simplest Photoshop tools without regards to image content will definitely yield many suboptimal, washed-out looking images.
Also, after applying one or another of the Photoshop conversions to monochrome, the image usually is still RGB. One needs to then convert the image that looks grayscale to actual grayscale. Otherwise, you end up with an RGB image for which for every pixel R=G=B, a situation which could lead to some “interesting” and likely undesirable printed output, especially if printed on a color device.
Another issue to consider is one of color management. Whether one wants it or understands it, color management is really always on in Adobe applications. If you don't use profiles and the wrong assumption is made with regards to the color space of content, you can get suboptimal results, in grayscale such results being muddiness, poor contrast, etc. And to get back to the file format issue, EPS doesn't support ICC color management directly.
- Dov

IMAGE STABILIZER for FCP

Does anyone know of a good Image Stabilizer (and image tracker) for FCP? I have tried the demo of CHVelectronis, and I couldn't figure it out. Avid has one that is extremely intuitive *but, obviously, it doesnt work with FCP).
Any of you worked with an easy to use one for FCP?
Thanks,
David

a stabilizer is built in ... the effect is called SmoothCam (Effects > Video Filters > Video > SmoothCam)
its best to export just the portion of the clip you want to stabilize as a standalone movie file before applying the effect to it as this will minimize the processing time
http://audiovideoproducer.digitalmedianet.com/articles/viewarticle.jsp?id=165367
for tracking you could use Lyric's Motion Tracking Kit
http://www.lyric.com/fcp-plugins/tracking.htm
but I would use Motion's Match Move
http://www.motionsmarts.com/tutorials/matchmove1/mm1.html

Filters for FCP

Are there any sites that I could download filters for FCP such as grainy old film look, and a way to put a black halo around the video like you may see in the movie The Illusionist. The edges fade to a black and its in a oval shape around the video. Let me know.

A shaped soft edge vignette (as opposed to a simple
round darkening of the extremities) can be prepared
in Photoshop to the pixel count of your image.
I'm doing this in HDV a lot recently.
In that frame size, I make a 1440 x 1080 pixel
rectangle and have PS adjust it for HDV aspect. There
are quite a few ways of shaping the frame. Paint,
blur selection and invert, etc.
When you have a frame you like, import it into FCP as
a JPEG or as a PS layer with a Blending mode already
in place. Float that above your image or sequence and
make the Blending mode Multiply, for instance.
Instant shaped frame.
A similar path can matte fancy titles, crawls and
stuff.
Thanks Peter. I had an idea similar to that just was too lazy to do it. Thanks I will take your advice and make a vinette in photoshop. Do you have a link where I could preview your videos? You can see my videos at web.mac.com/sxeseis

Faster image filters

Hello,
As the VolatileImage class allow us to render images faster than BufferedImage,
I wanted to know if there was a way to filter images faster than with ImageFilter classes.
I ask that beacause I want to create some image effects for video game programming,
and I find the ImageFilter classes are time consuming.
Thank you in advance

Miguel,
The IMAQ Vision toolkit has some simple filters available. Most of them are also available in Vision Builder. However, any "high-tech" filters like the ones in PhotoShop would have to be developed from scratch.
I have some experience designing image filters. I would be glad to discuss any specific filters you are trying to achieve. I can be contacted at [email protected]
Bruce
Bruce Ammons
Ammons Engineering

How to apply filters for union all report in OBIEE 11g

Hi All
Can we apply saved filters to union reports in obiee 11g?
I am able to apply saved filters for normal reports but not for union reports.
The catalog pane is blank, when i click on result columns or each criteria.
The only option i see is to manually create the filters for each criteria, dont i have any choice to use a saved filter for union report?
Is this a bug or something i am unaware. Please guide me
Thanks

Hi manu,
Filter is created based on subject area.we can't use save filter in any other subject areas.
now we can use new filter for union reports.
if Helps please mark as correct.. :)

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%) If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see? There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light. MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
If "open in low resolution" is unckecked the appearance is good but the very small size.
See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

Trying to upgrade my ipad mini to ios7 get error 3014 .have tried most of suggestions , ipad has image asking for connection to itunes. and around and around I go

Trying to upgrade ipad mini to ios7. extracts software but wont restore it . error message 3014..ipad no longer working, just image asking for connection to itunes.Have tried all the troubleshooting suggestions I am capable of. ((((((

There is some troubleshooting for error code 3014 on this page : http://support.apple.com/kb/TS3694
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Recommended Image Size for Contact Pictures?

Hi All,
I want to edit up some family members to attach thier images to my iPhone contacts... Does anyone know what the preferred resolution size is for the iPhone for optimal appearance?
I've tried to do this with outlook before, and I hate the way it dithers the images to a low quality.... I'm hoping that the iPhone doesn't do this and so I wanted to experiment with how they would appear...
But instead of making the images just any random size, I wanted to crop them to the preferred image/pixel size so that my photoshopped images look like what I expect them to show up like...
If you could advise with the documented or known pixel resolution size used by the iPhone it would be appreciated!

Thanks, but I don't believe that the contacts come up full screen do they?
Usually there is a optimal image size for certain things like contact photos and I am just trying to help ensure that all my photos are the same size and don't vary...
I might be a little carried away with how I am formatting them, but just hoping someone already knows this answer!

Providing sorting filters for a table in webdynpro java application

ho to provide sorting , filters , for a table in webdynpro java application .

Hi Pradeep,
Please go through the following article on implementation of filtering and sorting:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f024364b-3086-2b10-b2be-c0ed7d33fe65
The article contains a link to a sample application using the TableSorter and TableFilter Class.
The same classes can be used by any other web dynpro application. Download the sample application and copy the classes. In case of a specific requirement, modify the TableSorter and TableFilter classes.
Regards,
Kartikaye

I would like to be able to size images by kilobytes instead of pixels--is this possible? I use I-Contact which requires a maximum of 70kb per image. For best quality I want to make the images as close to 70 as possible. Currently I choose a size of 300

I would like to be able to size images by kilobytes instead of pixels--is this possible? I use I-Contact which requires a maximum of 70kb per image. For best quality I want to make the images as close to 70 as possible. Currently I choose a size of 300 pixels on the shortest side but sometimes this gives me an image of slightly greater than 70kb and sometimes the image is just 30-40kb. Is there a way to be more precise in reaching but not exceeding 70 kb?

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
You can opnly resize using the available options and file size is not one of them
LN

Help- how do I make images ready for web gallery??

Hi,
I am trying to create a photo gallery of images within Bridge using the Adobe Web Gallery feature. I have the images I want to use in a folder.What steps do I need to take to get the images saved in the correct format and file size? Also, what files sizes do you recommend for a web gallery? I need to make medium to large thumbnails & large images (when clicked). Here's what I am thinking I need in terms of getting this right:
use Adobe Photoshop/Bridge to create the gallery
jpg for photos
gif for solid colors
file size under 2MB (full image), under 20-30K for (thumbnails), total size of all images under 50K (no more than 50 sec. to download)
screen size: 984x728
screen resolution: 72dpi
If you could help me in any way, shape or form concerning making my images ready for a web gallery that would be most helpful. And if you can refer me to any resources on making a web gallery that'd be awesome. Thank you!
ashmic19

Thanks for the link Curt Y that video is really helpful. After looking through some materials I had I figured out how to optimize my images. So I don't need any help anymore. But thanks to all who viewed this and thanks Curt Y for the video!
ashmic19

Image Filters for InDeasin CS

Similar Messages

Maybe you are looking for