Image from a camera using a video converter to USB

I tring to capture in my LabView app the alive image of a camera that is transmitted to a Tv tuner. I´m using a video converter to USB (PC) I don´t need to process the image I just want to see the image of the camera alive.
When I use a Microsoft LifeCam (usb) conected directely to the usb port I can see the image in my app.
When I use Windows Movie Maker to see the image of my remote camera I can see the image alive.
But, when I use my app with the remote camera it doesn´t work. I can´t see the image.
My app is is attached bellow. As you can see I´m usig Imaqdx and LabView Fall 2011.
Someone could help me?
Thanks in a advance.
Celia
Attachments:
CamTuner.vi ‏43 KB

Dear Christian,
I don´t know if my device is directshow compatible. May be not, because I tried to see the image using NI Measurement & Automation and I couldn't, besides the device appears in NI-Imaq devices list.
But before this Labview app I made the one that is attached, using labview 8.6 and Imaq for USB. It woked right but because of the property page object every time the app ran a window was open and no matter was checked ok or cancel it worked in the same way. I thought using Imaqdx objects I didn't have this undesirable window. Do you know why it worked using Imaq for USB objects and it didn't using Imaqdx objects?
Thanks in advance.
Celia
Attachments:
CamImaqUSB.vi ‏43 KB

Similar Messages

TS1587 Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick, my imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols, need h

Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????

It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

How can I see images from my camera using the HDMI cable? Is there an app to transfer jpgs?

I want to preview images from my Nikon DSLR on my ipad2. It would also be nice to see the same video when the camera is in live mode. I bought the Apple ipad-to-HDMI connector and an hdmi (camera to connector) cable. Everything hooks up but nothing happens when I take a picture or view a pictures on the camera.
Do I need an app for this?
I know there is a USB based camera connection kit too - however I was hoping to have the HDMI also for outputing to a projector

That cable set up you have is probably not going to work. The iOS devices seem a little sensitive to having the right connector for the right job. I have the USB connector (and the HDMI one too) which is in 2 parts: mini USB link and SD. My older Nikon D70s does not use SD cards, so I use the cable. When connected any images on the card (in the camera) are displayed in the built-in Photo app in an Imports album. Just touch the Import button and all are brought in. I use RAW and have found that the RAW images are transferred to the computer (MacBook Pro + Aperture) when I get home. A comparison (I kept the images on the card and imported from that too) shows that the resolution/size is identical. As an additional note as you mentioned this, video clips work the same.
With all the connectors, I carry a small bag for the devices I work with.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

I am downloading from a Canon 650D to Photoshop CS5.1 AND Adobe Bridge CS5.1 do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

I am downloading from a Canon 650d TO Photoshop CS5.1 and Adobe Bridge CS5.1 Do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

Please check the list yourself and co,mare the necessary CR version with the one your version of Photoshop utilizes.
If the version os higher than yours you can use the free DNG Converter – as to how to use it please read up on that.
Camera Raw plug-in | Supported cameras

Panasonic camcorder HDC-TM90 any experience using Pavtube Video Converter with Final Cut Pro X

Does anyone have any experience using Pavtube Video Converter with Final Cut Pro X for Panasonic camcorder HDC-TM90 shooting in 1080 P 60 ( mts file extension)

Don't use these generic offbrand converters to get footage into FCP X. they re-encode your video and cause loss of quality. If FCP X cannot import your video then use a utility that simply re-wraps it into a quicktime file with no transcoding or loss. I prefer Clipwrap which works great and is updated frequently but there are free alternatives like Media Converter or Rewrap.
But version 10.04 of FCP X should import it directly from camera as long as the folder structure is complete and you are not trying to merely import it from single mts files.

Photo images from dig. cam [one is error and other won't open] questions

My wife inserted the sd card in the card reader and copied about 70 photo image files to the Mac. The camera that took all the 70 photos was a Panasonic DMC-LZ5 but I don't think the camera model matters much here.
For the first time, 2 of the many images seem to be corrupt. Mac X reports one photo image has an error while trying to open and reports the second image won't open.
My main concern is whether or not to just delete the two error/corrupt jpg images. My other main concern is that I don't want to keep the two images if it could affect or corrupt my hd or Mac system in some way.
I normally just trash corrupted files; however, in this case I went ahead and attempted to open both of the 2 troubled files myself later and they both opened up in Preview and didn't report any error or corruption. However, one of the jpg images defintely is corrupt when viewing it as the bottom of the image is definitely messed up. However, the other image now opens perfectly and looks fine to the eye as if nothing is wrong with it.
Here is a link to the one photo image that isn't quite right [note the obvious distortion at bottom of image]. Link is http://mysite.verizon.net/vzenvo78/question595.jpg
Further very relevant information: The SanDisk sd card that all the 70 images were on is a 1 gig card and the sd card seems to be a total loss. The sd card can't be initialized/formatted by disk utility and furthermore the sd card is no longer recognized by the Panasonic camera - the Panasonic camera won't even preview the images off the card or allow me to format the card even from the camera.

Hello,
I see what you are talking about. I just discovered this same exact problem on a friends G5 after he uploaded pics from his Leica.
This is what I did: I ran Disk Utility from the system restore disc to verify and repair the drive. DU reported Volume Bitmap problems. DU was able to repair the disc. Next, I created a new user account and tried uploading the images from the camera to the G5 and it worked just fine. The images loaded like they should.
I also reinstalled the drivers that came with the camera.
Delete any files that your Mac reports as a problem. It's just not worth leaving them on the drive.
So...... run Disk Utility from your system restore disc. If it reports errors, hopefully DU can repair them. If not, one option is to get DiskWarrior here:
www.alsoft.com or TechToolPro4 here: www.micromat.com
One other idea is how old is the card?
Next idea is to create a new user acccount: System Prefs/Accounts. Try using that account to upload the same images. See if they upload as they should. If they do, then the issue isn't system wide, it's just in the other user account.
Remember to always back up your images/audio/data often as you never know when you might need to do either an Archive or Erase and Reinstall.
Carolyn

How to view tagged images from the camera in Lightroom?

How do I see a tagged image from the camera (tagged using the lock button, to remind me of a image I want to find quickly) once imported into Lightroom? This is possible to do in Photomechanic, as I can see all of the tagged images from the camera once opened in Photomechanic. Yet so far I have not found a way to allow me to do this in Lightroom so far. Any solutions welcome please.

There isn't a way to do it that is part of Lightroom. There is a plug-in that might help you, though. Check it out here: Locktastic
It doesn't say if its compatible with LR4, but you can try it to find out.
Plug-ins aren't usually as efficient as built-in functionality (like PM), but it might be a solution for you.

HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?

No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
I've loaded thousands of photos on my IPad and never have had that problem.
Don't blame a moment of carelessness on your device.
If you want to make such a suggestion to Apple use http://apple.com/feedback

How to Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER in VC++ ?

Hi,
I have : - IMAQ1394 2.0.1
              - NI Vision 7.1
In VB, I can Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER :
    Dim Image0 As New CWIMAQImage
    imaq1394SnapCW(sid0,Image0)
    CWIMAQViewer1.Attach Image0
Now,How can I do this in VC++6.0?
    I tried:
              C_CWIMAQImage m_imgViewer1;
              m_imgViewer1 = m_CWIMAQVision1.CreateCWIMAQImage();
              m_CWIMAQViewer1.Attach(m_imgViewer1);
              imaq1394SnapCW(Sid,m_imgViewer1); <--there is no "imaq1394SnapCW "function in VC++,why?
    Please help me!
    Thank you!

For people looking back at these old posts regarding
CWIMAQViewer - it was not made to be used in the C environments and is made
for VB.
Refer to the following locations for displaying images in C
environments:
Start»All Programs»National Instruments»Vision»Documentation
Start»All
Programs»National Instruments»Vision»Text Based Examples
Make
sure that you look at the examples and documentation that is in
reference to the C environments not the VB environments
Vince M
Applications Engineer

How can I download automatically only new images from my camera?

Hello,
I can not download only new images from my EOS 450D-camera with Elements 10-Photodownloafer (Mac os).
Each time I use Photodownloader it downloads all images , also those that were downloaded preveously
How can I set photodownloader?
Thanks for your advices

I share my card with my wife and she likes to download our images also on her PC, so erasing all images is not an option.
It seems that earlier version of adobe photo downloader has the feature "copy only new files" , but V10 does not.
Thanks for your answer
Mikele
Op 10-jun.-2012, om 15:33 heeft 99jon het volgende geschreven:
Re: How can I download automatically only new images from my camera?
created by 99jon in Photoshop Elements - View the full discussion
Don’t you format the card in the camera after each download? That will wipe all images and prepare the card for a fresh shoot.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4480409#4480409
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4480409#4480409. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have an Air running Mountain Lion. I also have a digital point-and-shoot camera, but have never downloaded any images from the camera to this Air. If I connect the camera to the Air, what might I expect? Will connecting the camera to the Air by a cable

I have an 11" Air with lots of remaining capacity running Mountain Lion. I also have a digital point-and-shoot camera. I have never downloaded images from the camera to this Air. However, if I just connect the camera to the Air's USB port, with the camera's available cable, and the Air is open, will a program like ImageCapture or iPhoto, auomatically come up, and I can begin to download wanted images? Or, will this sort of connection delete or fry everything on the Air? Do I need any other software on board? Will current Apple onboard programs allow me to download images from my camera and not destroy everything else?

Answered. Thanks.

Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"

Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
Everything is fine.
-They are the right format
-Quicktime is updated
-I have tried simply dragging them into the 'movie' library
-I have tried going to file<add file to library
Nothing works, has anyone else had this problem and found a way around it?
Any and all help appreciated.

In addition to Mike's suggestions, you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.

Can you move a video taken on the iPad from the camera roll to 'Videos' without syncing through iPhoto?

Pretty simple question that I can not figure out the answer to. Can you move a video taken on the iPad from the camera roll to 'videos' on the go?

I can do it on my iPhone and, according to the iPad manual (p. 58), you can do it on an iPad.
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Why can't i download e-mail attachments and images from the web using firefox browser

i am using a Mac laptop.
when i try to download my e-maill attachments, the Download tab appears. but when i click the download "key", nothing happens.
i also can't save images from the web using firefox. the Save this Image tab appears but when i try to save, nothing happens.
when i check on my Downloads folder, only unreadable files like these appear:
1ttOnsY3.doc.part
2Sf9jyNT.doc.part
62+fxHoe.doc.part
ASx1ZO9N.xls.part
BtRlxR4R.exe.part
dZmKC1nU.doc.part
ehmb9rox.doc.part
FJx+ku02.doc.part
FSR7ckkV.doc.part
hvlqg5Qy.exe.part
JwVExec0.doc.part
KEBM+klW.doc.part
but when i try to use my Safari browser, download is successful.
ive tried reinstalling my Firefox (version 3.6) but to no avail

Not all 10g links are wrong however a number of them are as follows:
Oracle ADF Installer (10.1.3.2) (Version 10.1.3.2, build 4066)
Oracle ADF Installer (10.1.3.1) (Version 10.1.3.1, build 3984)
Oracle JDeveloper 10g (Version 10.1.2.3, build 1936)
Oracle JDeveloper 10g (Version 10.1.2.2, build 1929)
Oracle JDeveloper 10g (Version 10.1.2.1, build 1913)
Oracle JDeveloper 10g (Version 10.1.2, build 1811)
All update this post once resolved.
Thanks for the notification

Image from a camera using a video converter to USB

Similar Messages

Maybe you are looking for