Image from BLOB now showed when page cache set

Hello,
I have a page that display images from BLOB,
After setting page cache to 1hour, page load faster but images not showed.
Please help me on this.
Thank you.

Hi Halit,
For me i dont thing, this problem occurred. As i checked by setting the page cache to 1 hour. After that images loaded normally as usual.
I tried with my mozilla browser. In which browser you tried, may be your browser fault.
Kindly check it.
Brgds,
Mini
Mark Answers Promptly

Similar Messages

Help my image library is now showing errors

I have Lightroom 5 and have just upgrade with the latest updates. Now all the unkeyworded images have an error notice on them. How do I restore them to were there were yesterday? it looks like they are now only thumbnails as they are very pixelated. There is now image metadata showing at the side of the image either.
Any suggestions please?

Hi Keith,
if I view the library in the grid there is an ! mark next to every photo that I haven't given keywords to yet but if i view them in the Loupe window it has a label above which says There was an error working with the photo. There is no metadata showing next to it. The only thing I have done in the last few days to the computer is to run updates on my operating system. Actually Lightroom isn't then only thing not working, my accounting programme won't work at all now!
I am new to lightroom so not 100% sure what I am doing, any insight would be welcome.
Thanks
Date: Thu, 24 Oct 2013 04:06:21 -0700
From: [email protected]
To: [email protected]
Subject: Help my image library is now showing errors
    Re: Help my image library is now showing errors
    created by Keith_Reeder in Photoshop Lightroom - View the full discussion
What do you mean by "error notice"?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5784643#5784643
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5784643#5784643
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5784643#5784643. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem Displaying image from blob

Hi all,
I m using,
Database : 10g Rel 2
Frontend : DevSuite 10g
OS : WinXp
Browser : IE 6
Problem : In my forms i m displaying images from blob column but some of the images are not displayed. I have tried with all image formats available in combination with all available display quality but no luck. What could be the reason for it and how do i solve it?
Can anyone help me plz?
Thnx in advance.
Imtiaz

Hello,
It is very difficult for us to "guess" what images you can read and what others you cannot.
Maybe you could provide more information on images that are not displayed ?
What is their native format ?
Francois

Display image from BLOB field (png image)

Hello,
On my database i have a function which return BLOB (png image from a webservice)..
Is there some tutorial or sample code how to display a image froma blob field in oracle reports?
thank you

You can create a view and base your report on that view. The view would be something like:
create or replace view my_view as
select my_blob_function() image
from ...In your Report it would just be:
select image
from my_viewNow, I'm not sure if Reports supports png format, though.
There are many examples to be found, e.g.
http://download.oracle.com/docs/html/B10602_01/orbr_dyngraph.htm

How to load images from BLOB to javascript?

hi, Guys:
I need to load thumbnail images from BLOB to multiple markers' infowindow in Google map . I have implemented Google map in APEX. I load the data suchas text for every marker's infowindow from Oracle database table with PL/JSON, and infowindow works fine. Could anyone give me a suggestion or example so I know how to load images to javascript?
Thanks a lot.
Database: Oracle 11g R2
APEX: APEX 4.1
Thanks.
Sam

lxiscas wrote:
hi, VC:
Thanks for your kind reply. I need to render these images out of APEX session, actually in javascript that is related to Google map markers' infowindow.
I checked the documents of APEX_UTIL.GET_BLOB_FILE_SRC, but my impression is I need to use it in APEX instead of javascript if my understanding is correct. I already implemented a procedure with PL/SQL to load images from a BLOB column in Oracle database. But the problem is, how can I pass it to javascript code out of APEX to javascript (I could pass text or number from APEX to javascript with PL/JSON though,But I assume that still google map will be within a valid apex session? if so you should be able to use the above api.
Basically what this api does is generates a kind of url to each blob in the database, not sure how google api's deal with this though. Why don't you give it a try?
The other option is to make your pl/sql procedure public and then you can generate the json to include the images urls such as:
     "employees" : [{
               "firstName" : "John",
               "lastName" : "Doe",
               "imgSrc" : "http://somewhere/db_schema.your_download_proc?p_file=#ID#",
               "firstName" : "Anna",
               "lastName" : "Smith"
               "imgSrc" : "http://somewhere/db_schema.your_download_proc?p_file=#ID#",
               "firstName" : "Peter",
               "lastName" : "Jones"
               "imgSrc" : "http://somewhere/db_schema.your_download_proc?p_file=#ID#",
}And then you can use this new attribute to populate the images in javascript using standard img tag
See this tutorial http://docs.oracle.com/cd/E14373_01/appdev.32/e13363/up_dn_files.htm
I did not find any method in PL/JSON to pass image object)? So far I only found example to load images from local files to javascript.Hmm..I don't think you should load image objects.
Vikram

Images are not showing when page load

Hello All
I am having lot of webparts on my page.
In two of them webpart i applied xslt and showing image of created by person in this
1)Announcement webpart(Wall updates)
2)Showing blog using content by query webpart(Blogs)
While page loading not able to load images in both webpart view.
But when i decreases webparts on page images rendered properly.
I think it is taking time to fetch images so timeout and showing default images.
Kindly suggest me some way to tackle and images will displayed properly
Thanks in advance
Varsha Patil

Hi,
According to this documentation from MSDN about
SharePoint Server 2010 capacity management: Software boundaries and limits:
“In SharePoint Server 2010, there are certain limits that are by design and cannot be exceeded”, “The default values for these limits were defined by testing, and represent the known
limitations of the product. Exceeding supported limits may cause unexpected results, significant decrease in performance, or other harmful effects”, “in most cases, operating at or near an established limit is not a best practice, as acceptable performance
and reliability targets are best achieved when a farm’s design provides for a reasonable balance of limits values”.
So it is not recommended to add many web parts into one page.
If there is a special need to display many web parts in one page, it is recommended to reorganize the content to minimize the number of web parts in use and customization will
be needed sometimes if the built-in web parts can’t meet the requirement.
Best regards
Patrick Liang
TechNet Community Support

Retreving Image from Blob in forms 6

I am using forms 6 and oracle 9i.i have an image item and on when_button_press trigger i insert an image into the image_item by calling the read_image_file function and then save that image into the database.it gives me a message that 1 transactoion applied and saved. now i want to to retrived that image from database into form.how should i do it.also how will i know whether my image has been saved or not.when i tried to execute query i got message query caused no records to be retreived.
my table name is test_images and i have one column image(blob)

your test_image table better to have another primary key item like file_id number with table trigger to sequence generating its value for IF INSERTING event, or it will have no handle to get the image back.

Is it possible to get the image from the i pad when mirroring via Apple TV to fill the screen instead of appearing as a screen within a screen?

When mirroring, is it possible to get the image from the ipad to fill the screen on the TV instead of appearing as a screen within a screen?

Welcome to the Apple Community.
No, the iPad has an aspect ratio of 4:3, a TV has an aspect ratio of 16:9, to fit one into the other is impossible without distorting the picture. If your TV has a zoom feature, you may be able to use this to fill the screen a little more to your liking, but this will result in cropping top and bottom.

Project Structure Images from css not showing in subfolders....

Hi, I'm a newbe to JSF but really want to learn how to use it as Im currently doing a college project with Hibernate, and the JSF managed beans seems ideal for projects like this, anyways here's my prob...
Im using Netbeans 6.8 for a web-project with the normal folder structure, so in the Web Pages folder, i've an
index.xhtml intro page
css folder
js folder
images folder
pages folder for rest of pages
and obviously to access the css in the index page i'd include:
<link href=css/style.css rel=stylesheet type=text/css />and then to access and add images to the index pages from the css, i the style.css file I have e.g.,
body{
     font-family:sans-serif, Ariel;
     font-size:12px;
     background: url(../images/bg.png) top left repeat-x;
} and so on for all the js and ajax stuff which all works fine.
However in the pages subfolder say I've a page called solar.xhtml well then while it is possible for to access the css's by using ../ as in
    <link href=../css/style.css rel=stylesheet type=text/css />which adds the colour scheme and font types etc.so it's 100% getting this, however the images from the images folder are not being displayed, which I really can't understand as if I change the page to solar.jsp then it works fine also all the files inthe js folder are being accessed from the subfolder with ../ just not the images.
Would really appreciate any help or advice you could give me....
Many Regards
Pat Nevin

Hi - I've found the solution, so thanks anyway for anyway who was gona help!

Ie9 flash object not showing when wmode is set

I'm searching and searching but do not find any solution for this.
We're having a flex web application that is working fine until now. We're using until recently the google maps flash api, unfortunately this is already deprecated and will disappear completely in september 2014. Therefor we moved the whole integration to the js v3 api, which is working fine. The whole thing is an overlay over the application, since everything is moved to js, I added the property wmode to the object in html and set it to opaque in order to be able to layer everything. It's working fine for most people, but some (including my boss) are seeing a blank screen. Seems that nothing happens (although the swf loads), and I can not figure out why. Same browser (ie 9 or 10), same flash player version (11.6.xxx). Browser cache cleared, flash player cache cleared...
Somebody having a clue? Removing the wmode-property solves the issue, but then I'm not be able to get my map on top of the application.
The swf is definetly loading since I see calls made to the server in order to login etc. It's also not a flash player issue. The swf-file is directly accessable and rendering if done so.
Thanks
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">

<head>
    <title>${title}</title>
    <meta name="google" value="notranslate" />
    <meta http-equiv="X-UA-Compatible" content="IE=10; IE=9;"/>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    
    <style type="text/css" media="screen">
        html, body { height:100%; }
        body { margin:0; padding:0; overflow:hidden; text-align:center;
               background-color: ${bgcolor}; }
        object:focus { outline:none; }
        #flashContent { display:none;}
    </style>
    
    
    
    <script src="PlusOptixSync.js" language="javascript"></script>
    
     <script language="javascript">
        function getEIDxml()
          var strXML = document.MirageApplet.readCardAsXMLString() + " ";
          return strXML;
        function setOuterSize()
            var nomWidth = 1280;
            var nomHeight = 800; // 786 viewable in fullscreen
            var actWidth = nomWidth;
            var actHeight = nomHeight + 150 - 30; // fullscreen change coeff (ruimte die we winnen door f11) - taakbalk
            window.resizeTo(actWidth, actHeight);
            //window.outerWidth = actWidth;
            //window.outerHeight = actHeight;
            //script die de F1 help functionaliteit van de browser afzet. Dit is nodig omdat IE de F1 functionaliteit van de flex applicatie onderdrukt
            document.onhelp=new Function("return false");
            window.onhelp=new Function("return false");
    </script>
    <script type="text/javascript" src="swfobject.js"></script>
    <script type="text/javascript">
        // For version detection, set to min. required Flash Player version, or 0 (or 0.0.0), for no version detection.
        var swfVersionStr = "${version_major}.${version_minor}.${version_revision}";
        // To use express install, set to playerProductInstall.swf, otherwise the empty string.
        var xiSwfUrlStr = "${expressInstallSwf}";
        var flashvars = {};
        var params = {};
        params.quality = "high";
        params.bgcolor = "${bgcolor}";
        params.allowscriptaccess = "sameDomain";
        params.allowfullscreen = "true";
        params.wmode = "transparent";
        var attributes = {};
        attributes.id = "${application}";
        attributes.name = "${application}";
        attributes.align = "middle";
        swfobject.embedSWF(
            "${swf}.swf", "flashContent",
            "${width}", "${height}",
            swfVersionStr, xiSwfUrlStr,
            flashvars, params, attributes);
        // JavaScript enabled so display the flashContent div in case it is not replaced with a swf object.
        swfobject.createCSS("#flashContent", "display:block;text-align:left;");
    </script>
      
      <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/2.0.0/jquery.min.js"></script>
      <script src="http://code.highcharts.com/highcharts.js"></script>
      <script src="http://code.highcharts.com/modules/exporting.js"></script>
      <script type="text/javascript" src="../js/util/Namespace.js"></script>
      <script type="text/javascript" src="../js/util/mirage-services.js"></script>
      <script type="text/javascript" src="../js/util/mirage-binding-utils.js"></script>
      <script type="text/javascript" src="../js/util/mirage-event-dispatcher.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-constants.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-theme.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-config.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-factory.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-zoomer.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-formatter.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-prototype.js"></script>
      <script type="text/javascript" src="../js/groeicurven-events.js"></script>
      <script type="text/javascript" src="../js/groeicurven-controller.js"></script>
      <script type="text/javascript" src="../js/groeicurven-flex-bridge.js"></script>
      <script language="javascript">
            initGroeicurvenFlexBridge("${application}");
      </script>
    
    <link rel="stylesheet" href="../css/google-maps.css">
    <script src="http://maps.googleapis.com/maps/api/js?sensor=false"></script>
    <script type="text/javascript" src="http://google-maps-utility-library-v3.googlecode.com/svn/trunk/styledmarker/src/StyledMarker.js"></script>
    <script type="text/javascript" src="../js/util/cvi_busy_lib.js"></script>
    <script type="text/javascript" src="../js/google-maps-events.js"></script>
    <script type="text/javascript" src="../js/google-maps-controller.js"></script>
    <script type="text/javascript" src="../js/google-maps-mediator.js"></script>
    <script language="javascript">
        function openMaps(data)
            document.getElementById('mapsContent').style.visibility ="visible";
            document.getElementById('optionsList').style.visibility ="visible";
            document.getElementById('activeCheckboxDiv').style.visibility ="visible";
            document.getElementById('mapsContent').style.zIndex = 100;
            onLoadHandler(data);
        function adresFoundHandler(marker, filtereEnabled){
            document.getElementById('mapsContent').style.visibility ="hidden";
            document.getElementById('optionsList').style.visibility ="hidden";
            document.getElementById('activeCheckboxDiv').style.visibility ="hidden";
            document.getElementById('activeCheckbox').style.visibility ="hidden";
            document.getElementById('mapsContent').style.zIndex = 0;
            clearLocations();
            ${application}.responseGoogleMaps(marker, filtereEnabled);
    </script>
    
</head>
<body scroll="no" onLoad="setOuterSize();">
    
    <div id="flashContent">
        <p>
            To view this page ensure that Adobe Flash Player version
            ${version_major}.${version_minor}.${version_revision} or greater is installed.
        </p>
        <script type="text/javascript">
            document.write("<a href='http://www.adobe.com/go/getflashplayer'><img src='get_flash_player.gif' alt='Get Adobe Flash player' /></a>" );
        </script>
    </div>
    <noscript>
        <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="${width}" height="${height}" id="${application}">
            <param name="movie" value="${swf}.swf" />
            <param name="quality" value="high" />
            <param name="bgcolor" value="${bgcolor}" />
            <param name="allowScriptAccess" value="sameDomain" />
            <param name="allowFullScreen" value="true" />
            <param name="wmode" value="transparent" />
            
            <object type="application/x-shockwave-flash" data="${swf}.swf" width="${width}" height="${height}">
                <param name="quality" value="high" />
                <param name="bgcolor" value="${bgcolor}" />
                <param name="allowScriptAccess" value="sameDomain" />
                <param name="allowFullScreen" value="true" />
            
            
                <p>
                    Either scripts and active content are not permitted to run or Adobe Flash Player version
                    ${version_major}.${version_minor}.${version_revision} or greater is not installed.
                </p>
            
                <a href="http://www.adobe.com/go/getflashplayer">
                    <img src="get_flash_player.gif" alt="Get Adobe Flash Player" />
                </a>
            
            </object>
            
        </object>
    </noscript>
    <noscript>Your browser does not support JavaScript!</noscript>
    <applet
      id ="MirageApplet"
      codebase = "AppletLibs"
      archive = "kg-eid-tools-2.6.jar,beidlib-1.1.jar,jdom-1.0.jar,joda-time-1.6.jar,commons-lang-2.4.jar"
      code     = "be.kg.mirage.MirageApplet.class"
      name     = "MirageApplet"
      hspace   = "0"
      vspace   = "0"
      style="width: 0px; height: 0px;">
        <param name="Reader" value="">
        <param name="OCSP" value="0">
        <param name="CRL" value="0">
        <param name="DisableWarning" value="true">
    </applet>
    <div id ="mapsContent">
        <h3 id="typeLabel">Google Maps</h3>
        <select id="optionsList"></select>
        <input id="searchInput" type="text"></input>
        <div id="activeCheckboxDiv">
            <input id="activeCheckbox" type="checkbox"></input>
            <label for="activeCheckbox">Toon enkel actieve locaties</label>
        </div>
        <button id="searchButton" type="button" class="secondElementButton">Zoeken</button>
        <button id="annuleerButton" type="button" class="annuleerButton">Annuleer</button>
        <ul id="locations" class="thirdElement"></ul>
        <div id="canvasMap"></div>
    </div>

This means that the SWF is written so that it only works when
embedded in a web page. When you add the SWF to the stage as a
stand-alone display object using addChild() it is not being hosted
in the web page.
You have 2 options:
1. Modify the SWF code (if possible) to remove the
ExternalInterface requirement. You can write code in your AIR
application javascript to subscribe directly to events from the SWF
using addListener() and call functions directly on the SWF object
(Flash/Actionscript is not my primary development environment... so
if I have gotten the terminology wrong I apologize, but I HAVE
written a flash application that worked as I describe). My SWF
actually works embedded in HTML or not using the code "if
(ExternalInterface.available) {
ExternalInterface.addCallback("setIsPlaying", setIsPlaying ); }"
2) Somehow add a HTMLLoader in a new child window (with
transparent = false) to the stage as a new child. I have not yet
figured out exactly how to do this, so If anyone can provide
information on how to do this, I too would be appreciative.

Online banking site now shows login page as text-only; on different computer it still shows page with images and clickables -- is there a fix?

Previously when I logged in to my INGdirect online bank account, the login window came up showing images and clickable hotspots. Recently, the login window changed to a text-only version. On two different computers running Firefox, the login comes up in the previous version, with images and clickable hotspots. I'm unaware of having done anything to change my settings either in Firefox or on the banking website. Because it seems to be localized on this computer, I've tried downloading latest version of Firefox, but got no change, login still comes up in text-only format.

Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.

Transaction details is not showing when page is opened from alert mail

Dear all,
Hope you are well enough.
I am facing a problem that i have a search page and after searching i am opening the details page.
There are many region for different type of data and all are showing accurately.
But the problem is that i am also opening this DetailsPG.xml from workflow mail where a link is give of that particular transaction.
When the page is opened then all sections are showing the data correctly except one region.
But i have done the following task in ProcessRequest() method
1.Get the transaction id.
2.Execute the view for that particular transaction.
3.Correctly mapped the attributes.
Is there any checking needed that from which responsibility the page is opening?

You need to have a JFrame to add your components to.
For example, make your class extend JFrame and set your main panel the ContentPane (assuming that all your components have been added to this panel).
public class SimpleSender extends JFRame {
this.setContentPane(JPanel1);
this.setVisible(true);
}

How to display images from BLOB column via APEX 4.0

Hello,
I did the following in order to display images of two Oracle records on the APEX page. I am using APEX Version : 4.0.1.00.03 , Oracle DB Version : 10.2.0.4.0.
1. Created An oracle table TEST_FORM
with 3 columns
( ID number, MIME_TYPE varchar2(255) , Image BLOB )
2. Inserted two records
10001, image/gif, ( actual image1)
10002, image/gif, ( actual image2)
3. created an Oracle procedure
CREATE OR REPLACE PROCEDURE show_my_form ( p_image_id IN test_form.id%type) AS
l_mime test_form.mime_type%type;
l_length NUMBER;
l_file_name VARCHAR2 (2000);
lob_loc test_form.IMAGE%type;
BEGIN
SELECT mime_type, IMAGE
, DBMS_LOB.getlength (IMAGE)
INTO l_mime, lob_loc, l_length
FROM test_form
WHERE id = p_image_id;
owa_util.mime_header(l_mime, false);
htp.p ('Content-length: ' || l_length);
owa_util.http_header_close;
wpg_docload.download_file (lob_loc);
END show_my_form ;
4. In Apex 4.0
step1. Created an interactive report on a new APEX page
step2. Specified the following in the Region Source
select id, mime_type, '<img src="#OWNER#.show_my_form ?p_image_id=#ID#" />' photo
from TEST_FORM
The column result shows as <img src="CCS.show_my_form?p_image_id=#ID#" />
I am unable to display the column image as a link to a proper image photo.
Could you please advise me if I missed anything ?
Thanks a lot.
Regards
Susanna
Edited by: user10318332 on 13/12/2010 15:51
Edited by: user10318332 on 13/12/2010 20:10

Maybe the space you have before the ? is causing issues. there shouldn't be any space.
Your procedure looks to be much the same of one that I have.
Have you granted execute on your procedure?
Also, what version DB are you running? This could be another issue: http://daust.blogspot.com/2006/04/xe-calling-stored-procedures.html
But anyway, you don't need to create your own procedure these days. You could do the following:
in your query, have a column: dbms_lob.getlength(blob) photo ; save, then in column attributes for that column, apply a format mask. There is usually a link below the text box for the format mask - BLOB Download Format Mask, which will help you build the format mask. But it is documented here: http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/advnc.htm#BCGGJHEF
Ta,
Trent

CRXIR2 image from blob field and some fonts not displaying in PDF export

I used CRXIR2 developer edition to create a report linked to a SQL 2000 database table. There is a blob field containing a JPG image that is different for each record in the table. I am using VB.NET code with ASP.NET 2.0 to programmatically change the temp file to a local folder for easy cleanup, open this crystal report with the 11.5.3700.0 version of the assemblies, set the datasource to a DataTable extracted from the DB, and then export to a PDF file.
The code for creating the PDF is:
        Dim TempRoot As String = MapPath(".") & "\temp\"
        Dim oldTmp As String = System.Environment.GetEnvironmentVariable("TMP")
        System.Environment.SetEnvironmentVariable("TMP", TempRoot)
        Dim objReport As New ReportDocument()
        objReport.Load(MapPath(".") & "\CReports\" & ReportName)
        For lnX As Integer = 0 To objReport.Database.Tables.Count - 1
                objReport.Database.Tables(lnX).SetDataSource(resultTable)
        Next
        Dim objDestinationOptions As New DiskFileDestinationOptions()
        Dim objExportOptions As New ExportOptions()
        Dim objFormatTypeOptions As New CrystalDecisions.Shared.PdfRtfWordFormatOptions()
        Dim pdfName As String = "test.pdf"
        objDestinationOptions.DiskFileName = MapPath(".") & "\temp\" & pdfName
        objExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
        objExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
        objExportOptions.ExportDestinationOptions = objDestinationOptions
        objReport.Export(objExportOptions)
        objReport.Dispose()
        System.Environment.SetEnvironmentVariable("TMP", oldTmp)
When I run the site locally in VS2008, everything works fine and a PDF contains the graph and all the fonts are correct.
However, when I run the exact same site from a web server running IIS6, the PDF generated does not have the image, and some of the fonts are substituted (all of the necessary fonts are installed on the IIS server).
Please help!

Hi Don,
I am able to see the image and export from the CR Designer on my machine running XP. However, I installed the designer on our IIS server running Server 2003, and the image does not show in the designer preview on that machine.
I found another forum thread that you are involved in (1902383) that seems to be dealing with this exact issue, and it looks like there may not be a resolution.
I am going to try a different route - instead of pulling in the SQL Image field directly, I am going to write it out to a temporary file and pull it in by altering the graphic location of the picture object in the report.
I'll let you know how that works.
Pete

How can I copy text&image from a website to Apple Pages at once?

I'm using Apple Pages 9.1, I can't copy text and images to pages at once. When I paste the copy contents to it, it just only shows text. With Safari, this functionality seems normal. I could copy and paste what I want to the pages.
What can I do now? I don't want to open Safari just only to copy and quit it after that. :D

Does it matter how widely you select? Firefox may be somewhat stingier in what it includes in a selection than other browsers. For example, I suspect you would have better results if you select the entire page and copy and paste it compared with a section of the page. But that's just a guess, I've never used Pages (or any of iWork).

Image from BLOB now showed when page cache set

Similar Messages

Maybe you are looking for