Image gets stretched when menu slides out on the iPad

I'm using this docking menu (http://www.jankoatwarpspeed.com/examples/AdvancedDocking/) with some small changes and running into an issue with the left menu stretching to the size of the 'dock' menu. I can only recreated it on the iPad and not with any browser on a pc. One odd part is that the entire left tab menu gets stretched out and not just the tab that is being hovered on. I'm fairly new to jQuery so I'm sure of its impact but haven't found this issue when looking around.
Any help is appreciated

Figured it out. The z-index on the slide-out menu was lower than the tabs which doesn't cause an issue anywhere else except the iPad. On the iPad the higher image (the tabs) basically stretches across both layers.
To fix it I simply gave the slide-out menu higher z so that it is always in front. It doesn't have the same aesthetic but is pretty close.

Similar Messages

  • Changing the font size when sending email out from the iPad with MobileMe

    Is there a way from the iPad, or from my MacBook to the iPad, that I can increase the size of the font when typing outgoing mail? I use MobileMe on both my iPad and MacBook. My sister has cataracts and she needs the type size larger than what is already set on the iPad outgoing mail. I can make the type size larger for my incoming mail - I guess I did it through iPad settings -but I can't seem to figure out how to make it larger for my outgoing mail. I would prefer to be able to answer her on my iPad than having to switch back to my Mac each time she writes. Thank you.

    I guess what I am looking for is a toolbar when I am sending email so that I can change the font size, change the typeface, make words bold, underline them
    I don't think you will find any app that does that, it's the kind of feature only Apple can add. You can tell them here:
    http://www.apple.com/feedback/ipad.html

  • When I copy a CD onto my macbook pro I sometimes get several songs that are "out" of the album.  How do I get them all together in one album?  Any help will be much appreciated!

    When I copy a CD onto my macbook pro I sometimes get several songs that are "out" of the album.  How do I get them all together in one album?  Any help will be much appreciated as I cannot seem to find the solution to this problem in the troubleshooting section of iTunes.

    Generally all you need do is give tracks from the same album a common Album Artist. See Grouping tracks into albums. The images need an update but the basic info. still holds.
    tt2

  • While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything.

    While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything. This is becoming incredibly frustrating. It happens at random time and a restart of the computer is all that helps, then with out any notice it starts to do this again.  Mac Book Pro i7 2.2 16 GB 1333 Ram, (2) 450GB SSD both internal to machine. At this point I am losing file because I am unable to save in the file type I need. Does anyone out there know how to solve this issue?
    Thanks
    phil

    I haven't been unify photoshop much in the past month, but I did try your suggestion and it seemed to work for a while. Today when i went to save a document the same thing happened: click on file>save at this point I can not click on save even though it is highlighted. Tryed to use command s that brings up the save dialogue box, but when I try to change file type I again cannot select it from the drop down menu.

  • How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend

    How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend the scale is reset to 1 = 1.

    Thank you for checking, Tom,
    I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
    Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
    My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
    On both error messages, the URL I was checking was:
    http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
    The last URL was, of course, the URL generated by iWeb.
    So, my question still is:
    HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
    Any ideas?
    GG

  • I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

    I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

    Hi
    My first thoughts are
    • iMovie ill behaving - Trash the iMovie pref file - use to set things right
    • in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
    Yours Bengt W

  • After editing an image in Photoshop it appears grayed out inside the media browser

    After editing an image in Photoshop it appears grayed out inside the media browser when I try to import into Facebook (ie.).
    What has to be done in order for me to be able to select my edited images from Photoshop whithin any media browser?

    function(){return A.apply(null,[this].concat($A(arguments)))}
    LarryM01 wrote:
    ...save it as sRGB?
    Would you care to comment on why there is an advantage to do this little extra job?
    Perhaps you don't want to hear from me, I don't know.
    I'll answer just this one little question.  Try to get your mind around what color management does, I promise it does make sense (outside of unexplained problems on particular computers).
    You want to save your web image with the sRGB profile embedded because some Internet browsers are color managed, and with an embedded profile it's more likely someone will see your image colors just as you intended.
    The assumption is that a lowly windows user with a cheap monitor and Internet Explorer will be seeing any image you save as "roughly" sRGB anyway.  Tagging the image with sRGB only affects those with color-managed browsers.
    You're looking for the most possible consistency for the viewing audience.
    -Noel

  • How do I shut off receiving phone and text messages when I a out of the country but instill want to send and receive emails emails

    How do I shut off receiving phone and text messages when I am out of the country.  I still want to be able to email and receive email on wifi

    Enable Airplane mode followed by turning on wi-fi access.

  • 2nd day w/my ipad2.  Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started."  I get music symbol when click ipod

    2nd day w/my ipad2.  Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started."  I get music symbol when click ipod.

    http://support.apple.com/kb/ts1567

  • After I hv upgraded os 6 on my iPhone 4, iPhone hung up at least one per day. After u press "End" 2 times( i used to do this in the old os) or when u slide to unlock - the screen suddenly enlarge . I need to reset the phone whenever this happen. Pls help

    After I hv upgraded os 6 on my iPhone 4, iPhone hung up at least one per day. After u press "End" 2 times at fast speed ( i used to do this in the old os without problem) or when u slide to unlock - the screen suddenly enlarge . I need to reset the phone whenever this happen. Pls help

    I Have fumbled all day to this resolved, I'll run the battery down and see what happens afterwards. This is not good !

  • Is it possible to get a camera memory card out of the cd drive, is it possible to get a camera memory card out of the cd drive

    Is it possible to get a camera memory card out of the cd drive

    http://www.youtube.com/watch?v=hpwDfpH4hR0

  • My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls

    My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls
    i have tried manythings but it doesn't work
    i put it in silent mode and i found my calls comes normaly and it works good but when i turn on ring mode it's back as it how can i fix that ?!

    Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device.  Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

  • HT201210 When I Restored my ipad 2, it will come out error [ The iPad "iPad" could not be restored. An unknown error occurred (-1). How can I do?

    When I Restored my ipad 2, it will come out error [ The iPad "iPad" could not be restored. An unknown error occurred (-1). How can I do?

    http://support.apple.com/kb/TS3694#error1
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice.

  • Why does my ITunes now get stuck when it can't find the album art?

    I've noticed since yesterday when I bought my new IPod Touch my ITunes on my computer gets stuck when it can't find the album art for some music I have. It gets to that album and won't do anything, won't let me skip it or anything ... Anyone else having similar issues and if so any workaround?

    Hi joanhello,
    I understand that you are seeing an issue with iTunes fetching information about CDs you are importing. Here is an article for you that explains how to troubleshoot this issue:
    iTunes 11 for Windows: If you don’t see song information
    http://support.apple.com/kb/PH12488
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • How to stop preview window from automatically getting focus when you move up/down the message list.

    Since updating (my TB was a few versions old) to 31.2, the preview window automatically gets focus when I move up/down the message list. I'm assuming this is a new "feature". Is there a way to shut this off and leave the focus on the message list so I can navigate up/down like before?

    You are referring to the 'Message Pane' which displays selected opened emails below the list of emails. It is not a 'preview'.
    When you select an email by either using mouse to click on an email in the list or using the arrow keys to select emails up and down the list, you are selecting an email to open and read. That is why it is being opened in the Message Pane so that you can read it.
    If you select an email in the list and then cllck anywhere else including in the Message Pane, then you will have moved focus away from the list and the strong highlight on email in list is reduced to paler highlight.
    When you click on an email in the list, the email becomes highlighted, at this point you can use eg: arrow keys to move up and down the list.
    If you are performing single left click on email in list and then do nothing else and the strong highlight auto changes to paler highlight.
    Check you do not have a conflict with an addon by starting Thunderbird in Safe Mode.
    Help > select 'Restart with addons disabled'

Maybe you are looking for

  • Modifying a filename using the first word contained in the document.

    Hi, I recovered around 2500 .doc files, lost in a drive fail (I know) and I've been trying to find a way to speed up the renaming process : I'm trying to create a macro that could grab the first characters, or first word of each file and replace Its

  • Application server problem after upgrade from 4.6C to ECC 6.0

    Hi all, We have recently upgraded our test server form 4.6C to ECC 6.0. In one of the programs we are using open dataset to write files to application server. This particular folder had been mapped through "Map Network Drive function" in windows. The

  • Interrupted my Restore iPhone 4 on my new handset and now I can't do it?

    I smashed my iPhone 4 a couple of weeks ago and got a brand new handset today in the Apple Store. The genius guy restored my contacts onto it so when i got home I connected it to iTunes, worked through the "get started" menu and opted for restore thi

  • Problem with CMS track for a SCA

    Hi, in my NWDI, I have a track which contains a SCA (for SAP_ESS), can i chekin that track in my local NWDS, modify that DC (the webDynpro project), and directly deploy it from my NWDS studio on a sap j2ee server, instead of cheking out and importing

  • XML parser fails to convert html encoded text nodes

    Under the strain of large documents this defect rears its ugly head more often. While parsing a text node containing html encoded chars i.e. < > &; etc... The parser will seemingly forget to change the chars at random, 99.9% of the time everything is