Image in pdf is small and in the top left of page

I am creating a pdf from a tiff in Photshop CS5, windows xp. The file is a map that is 36x48" at 100%. When I create the PDF the map image comes out as and 8 1/2 x 10" image in the top left corner of a 36" x 48" page. Can't figure out why this is happening. Has anyone else had similar issues and anyone know how to fix it? This used to work and now it doesn't???

Hi
It's very simple, but what is the need to use <b>into table itab</b> in your select query.
Rather, define a variable
data: v_butxt type t001-butxt.
Select butxt into v_butxt from t001 where bukrs = pbukrs.
TOP-OF-PAGE.
write :/ v_butxt.
Regards
Surya.

Similar Messages

  • Go and use my phone and in the top left hand corner it says no service. i have tried restoring the pone, resetting the network settings and also a hard reset as well.

    I have an iphone 5s and updated it to the new 7.1 software. A day later I go and use my phone and in the top left hand corner it says no service. i have tried restoring the pone, resetting the network settings and also a hard reset as well. It gains service for a short amount of time but then it loses service. Everyone else on my plan has service and their phones are completely normal but they never did the update... what can i do to fix this problem?

    Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file, or maybe it's one of your apps causing the trouble. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

  • Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error ,

    Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
    This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
    (NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
    (NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
    (NAND) WMR_Start: 149 apple PNN  NAND Driver, Read / Write
    (NAND) WMR_Start: 174 FIL_INT (OK)
    (NAND) WMR_open :371 vfl_open (ok)
    (NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
    (NAND) WMR_open:420 FTL_open      (ok)
    (NAND)_publishServices:642 FTL capabilities: 0x00000001
    (NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
    (NAND)_fetchBorrowedList:881 number of borrowed blocks 16

    Hi Guys!
    I'm German, so my english writing might not be perfect
    I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
    It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
    I almost gave up, thought the Logic Board was bad.
    BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
    Long story short, on mine the front facing camera, and sensor assy were bad.
    Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
    If so, i can live without the sensor and front cam.
    Just wanted to share, good luck everyone.

  • You know how when your ipod touch 4th gen is turned on and on the top left corner it says ipod can you change that

    You know how when your ipod touch 4th gen is turned on and on the top left corner it says ipod can you change that'

    No.

  • Downloaded my itunes and on the top left hand corner the drop box doesn't show pictues/I can't import pictures from my dell computer to my iphone 4s 6.1.3

    downloaded to my dell computer(windows vista) itunes and on the top left hand corner when the drop box comes down it doesn't have pictures on it..I can't import pictures from my dell to my iphone 4s 6.1.3ios also added music to iphone but can't move songs to my ringtone on phone

    The battery alone is a $5 to $15 part.  Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more.  This article discusses the varying successes of third party drives on iMacs:
    http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs 
    The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

  • My iPad suddenly stopped receiving cell signal from Verizon and in the top left corner it says Invavid SIM where it used to say 3G

    MY 2 week old IPad 2 suddenly stopped receiving a cell signal from Verizon and in the top left corner of the screen it says Invalid SIM where it used to say 3G.  Why did this happen and how do I fix it?  Still works on WIFI...

    Why? Who knows. You could try reseating the SIM to see if this helps. If not contact Verizon.

  • How to display COMPANY CODE DESCRIPTION ON THE TOP LEFT OF PAGE

    How to display COMPANY CODE DESCRIPTION(Field BUTXT) ON THE TOP LEFT OF EVERY PAGE OF THE REPORT GENERATED.
       Actually I have collected BUTXT using
    'select butxt into table itab from t001 where bukrs = p_bukrs'
    where p_bukrs is the selection screen field.
    REQUIREMENT: Depending on what company code we give on the selection screen, corresponding company code description(butxt) should be displayed at the top left of every page. how would i display it in TOP-OF-PAGE EVENT.

    Hi
    It's very simple, but what is the need to use <b>into table itab</b> in your select query.
    Rather, define a variable
    data: v_butxt type t001-butxt.
    Select butxt into v_butxt from t001 where bukrs = pbukrs.
    TOP-OF-PAGE.
    write :/ v_butxt.
    Regards
    Surya.

  • One website appears small and in the upper left corner of the screen - how do I fix

    A website that used to appear normal on my screen now has shrunk and is at the upper left corner of the screen. It is too small for me to use. How do I get the website to appear normal size again? I already tried "Full Screen" option and that does not fix the problem. I am using Firefox 16.0.2 and Windows 7.

    @jack, resetting the zoom level is already covered in the help article ;-)

  • Pdfs with small text in the upper left margin

    When creating pdfs using X from Windows 2010, little bits of text get removed from the page, reduced to very mininscule text, and thrown up into the left upper margin of the page. Why does that happen? How do you stop it from happening?

    In LR Prferences try unchecking 'Use Graphics Processor.'
    If that works next try upgrading your graphics drivers via AMD, Intel, or Nvida webste for your graphics adapter model.

  • OpenCL warp stabilizer renders in a small box in the top left corner

    Hi everyone,
    I have just built a new computer with the following specs:
    Premiere 8.1.0 (81) build
    i7 4790s haswell-refresh,
    16gb Corsair RAM (4x4 DDR3 1600),
    Gigabyte Z97MX Gaming 5
    2x A-Data SP920 128gb SSD
    Sapphire Radeon HD 7750
    Windows 8.1 Pro CZ
    Now I know this is a very weak configuration compared to other builds here, but I had hoped it would work fine for my amateur Full-HD workflow of clips mostly under 30mins.
    The problem is; when I enable OpenCL acceleration, then all clips with warp stabilizer become about 1/4 of the preview window; it carries over to the final render. I have tried this both with the AMD card and without it (having OpenCL enabled with the Intel HD4600). No avail.
    Now the funny part is that I used to have this same card running in my previous system; running on an obsolete Gigabyte UD3 with Core i5 750 in it and... IT WORKED! It was with the same Premiere version, running on the same OS. I've ditched that computer just a few days ago, but my new computer has this inexplainable problem.
    The build is not the issue, as I had the computer tested and everything is stable with decent temperatures.
    I am also having quite a lot of crashes while editing, but I think that's due to the infamous RedGiant suite which as I read on the forums is likely to blame. It's ok, i just need to save often. Would Neat Video be better? Does anybody know?
    Another problem is the sluggishnes and lags when my clip reaches beyond 30 mins; I don't think that's ok, my videos produced with EOS M should not be anything demanding for this setup; when I monitor the ram usage, it never gets above 8gb (and yes, I have allowed CC to use up to 13gb of the total ram); also other resources are almost idle during editing.
    The sluggishnes and lag is however even worse in SpeedGrade; over there when I move any slider, I need to wait for seconds! It somehow improves over time, but again, I just have an opinion now that this software suite is very very badly made. I am happy I am not using this to make money...
    Please correct me if I'm wrong and any links that could help me resolve the problems are super-welcome.
    regards,
    Jan

    Thanks for the report. We believe we have identified the issue and are working on a fix. For now the workaround is rendering in Software mode.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • My ipad say no service in the top left hand corner, how can I get it to change

    I recently bought a new I pad.  I installed it and in the top left hand corner where it should say "ipad" it say "no service" how can I get it changed?

    Try going to settings. Tap Reset, tap reset network connection, wait until the apple goes restart your iPad,. Back to setting tap provider and put in your network password.

  • With brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    Having same issue here:
    https://discussions.apple.com/message/19043181#19043181

  • I have a small window quickly popping up and disappearing in the top left corner of my screen?

    I apologize in advance if this has been covered elsewhere, but I have been searching and haven't found anything yet. And thank you for any help you can offer, it is greatly appreciated.
    Every 15 seconds or so a small, empty window will pop up in the top left corner of my screen and then vanish instantly. It opens and closes in a blink, so quickly that I am not able to interact with the window in any way. However, it shows up momentarily as a firefox tab on my bottom panel, so I know it is a firefox problem.
    It is only an issue because whenever it pops up I am exited from fullscreen if I am watching a video online, and anything that I am typing while the window pops up will be ignored.
    I am currently running Linux Mint Olivia 15 Cinnamon. However, I had the exact same problem when I was running Windows 8. In both cases, firefox has been installed, uninstalled, and reinstalled, which does not fix anything. I have updated firefox since it started happening, which also did not fix anything.
    It was very tricky, but I did manage to get a screenshot of the box while it was open.
    The same question was asked here, but never resolved: https://support.mozilla.org/en-US/questions/953373

    Does this only happen on specific pages?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can try to disable notifications as a test (you may want to reverse this).
    You can try to set the dom.webnotifications.enabled pref to false on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config

  • I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies. My monitor is a 23 IN' acer s series.

    I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies(although I can't really tell. My monitor is a 23 IN' acer s series. I just installed the drivers for my monitor with no change. I think I have a CD somewhere for my monitor maybe it has some kind of program in there that can help me. I can post a picture if I need to. Thanks

    No work around that I know of.
    Apple Feedback http://www.apple.com/feedback/

  • Why does FireFox open as a very small box in the top l/h corner and i have to resize it every time

    Why does FireFox open as a very small box in the top l/h corner and i have to resize it every time this only occurs on the initial opening up of F/Fx after boot-up

    Open the system menu via Alt+Space and see if you can resize that window.<br />
    If that works then close Firefox (File > Exit/Quit) to save that setting.
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window
    If the above didn't help then see:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

Maybe you are looking for

  • Performance during Unicode Conversion

    Hello, currently we are planning to do a Unicode Conversion on a Linux/MaxDB System. The DB has a size of approx. 350 GB. The system runs on Fujitsu-Siemens FlexFrame hardware. One problem is that during a test conversion the export of the DB took mo

  • How can I get a screw kit for my SL510?

    Hey guys--your manual says that the hard drive is a customer replaceable unit. That makes sense. Your manual also cautions people repairing a machine not to re-use screws and says to use a new screw every time. Obviously, to get at my hard drive to r

  • Add BOM line items for printing those line items in  cs03 transaction

    User will display the BOM line items and when he go by menu path EXTRAS->More-> so at the end of sub menu we need to add one more option for View and Print for that we need to use the menu exit and accordingly we need to add code to capture the relat

  • Installing Flash Player with Windows Vista Home Premium

    I'm trying to install Flash Player on an older system running Windows Vista Home Premium. Do I need an older version of Flash Player?

  • Creating a "grid" or  "wall" of words

    I am just starting to learn a lot about expressions and their uses. I have been looking for a simple way to create an effect in one comp that I will then use inside another. The first effect I want to create is to take a word and duplicate it many ti