Image is bigger on program monitor

How do I make the program monitor the same as the source monitor in a current project without starting over - I understand that a problem in the sequence project settings or mismatch in clips but I can't seem to change anything. My second question how do return or reset all the settings from the day I loaded Adobe premiere in my computer. I have about six project that I want delete.

At lower left of Program monitor window, there is a little box with a drop down arrow. You should set the option to "Fit" so you always see the entire image in the window. Sometimes you may want to "enlarge" the video to examine details and then you could choose 100%, 200%, etc from the list.
Not positive, has been covered here before, but I think if you hold "shift + F" while starting Premiere, it resets defaults. This does NOT delete any projects or media however.
Hopefully, when you started each new project, you created a NEW folder on your hard drive, and then saved the project and all related media, captures, renders to that same folder, then it is simple to delete the one folder and everything is gone for that project. If all assets from multiple projects are jumbled together in a common area, then it could get interesting, since you don't want to accidentally delete things used in current projects.
Not sure if there is an option in Premiere itself to delete an entire project including media. I think that would be dangerous. I know there is an option to "Consolidate" a project, which might discard unused assets, but I never use that and can't comment further, check the HELP files. Don't have access to Premiere machine right now to look.
Thanks
Jeff Pulera
Safe Harbor Computers

Similar Messages

  • Why does my video clip show in the program monitor only when it is playing (the program monitor is blank otherwise)?

    I am using WIndows 7 64 bit, and the most recent version of Premiere Pro CC on an I7 machine with 8GB of memory.  I have imported a HD .mov clip and placed it on the timeline.  When I press 'Play', it shows in the Program Monitor window.  When I stop the playing, the window goes blank.  I have rendered the clip (it has a yellow bar above it).  Even after rendering, the yellow bar remains and the sequence only displays when it is playing.  The source monitor has the same behavior. 
    Not being able to see where I am in a clip is making editing very difficult.  I have used Premiere Elements for five years, I have taken the Lynda.com course, so I have some familiarity with the program that suggests that the frame at the point of the CTI should show in the program and source monitors.
    What do I need to do to be able to see the frame in the monitors when it isn't playing?
    Update:  I spent 35 minutes with Tushar in a technical support chat (case number: 0186148124), during which time we deleted the contents of the Media cache folder in C:/Users/Your User Account/AppData/Roaming/Adobe/Common file (after using task manager to close coresync32.exe and creativecloud32.exe) and renamed both the Adobe folder and the 8.0 folder in Documents/Adobe/Premiere Pro/8.0.  This didn't get it, but was necessary for the next step:
    Going to the File menu, Project Settings, and selecting 'General Settings', Tushar had me change the Renderer to Mercury Playback Engine Software Only (I don't have a GPU accelerator video card yet).  I received a warning that all previews would be deleted, which I accepted.  That brought the image back to the Program Monitor.
    I've posted this for anyone who may experience a similar challenge in the future.  Despite a lot of Google searching before I contacted Tech Support, I didn't find anything even close to the description of the problem.  I hope this provides that source for future searchers.
    Jeff

    Thanks, Ann.  As I mentioned in my post, Tushar correctly pointed out that, without a GPU accelerated card (which I don't have - mine is a piece of junk which I will be replacing with a compatible one soon) you must use the software only settings.  I had changed my project over to the 'software only' setting, and I still had the problem.  The value Tushar added was the procedure for clearing the cache.
    What I did originally was a newbie error, no argument.  I posted it here for others who may fall in the same hole.  Your reply confirms that, without a GPU accelerated card, use the software only settings (sounds so obvious, yet I missed it.....).
    Jeff

  • Image / picture not showing up in source or program monitor

    I am working in Premiere Pro CC 2014. I cannot see the footage / images in either the source monitor or the program monitor. I can see the thumbnails in the bins but when I drag to the sequence or into source monitor, the picture does not come up in the monitors. I can see the images in AE and in Premiere Pro CC.
    I have reset workspace. I have restarted the computer. It does not matter what the file format is.
    Thoughts? Thanks.

    Hey!
    Have you tried changing the Video Renderer? If not, go to File > Project settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select "Delete Previews".
    Hope this helps..
    Rameez

  • Image Not Showing Up Properly In Program Monitor

    Hey guys, I am trying to do some animation with photographs. I was able to easily import them(they are in .jpg format)but when I drag them to the video section of the timeline. The image in the program monitor is only the very center portion of my image, and I can't figure out what is going on. Only an extremely small portion of the image shows up. It shows up fine in the source monitor but not in the program monitor. I tried changing views and everything but nothing worked.
    The resolution of the images are 3872 x 2592. I don't know if my resolution is limited or some settings are wrong or if I am doing something stupid... Any help would be greatly appreciated, thanks in advance!

    Use Photoshop to adjust the image size to reflect your project size. You can use actions to batch convert all your images in one go. That requires a new import of the adjusted images into your project. An alternative might be to rename the current image directory, start PP and when asked where the image files are, browse to the newly created directory with the smaller images.

  • Question:  How can I change still image sizes in Program Monitor

    All of a sudden, when I create a new title, it saves it as 1920 x 1080.  But my video is only 720 x 480.  I had hoped it was just the view in the Program monitor, but I saved the project, exported it and viewed it, and sure enough, my full page titles fill the entire screen, but my video is a tiny box in the middle of it.  I have tried to change the titles properties but can't figure out how.  I then changed the export size to 720 x 480, but it didn't help.

    Correct your sequence settings or create a new sequence with the correct settings and import your existing sequence into it.

  • Big Color Shift between exported H264 mp4 and Program Monitor

    I get a big Color Shift between exported H264 mp4 on Vimeo/Youtube and Quicktime X and Program Monitor.
    There are quite a few posts on Quicktime gamma issues, but there seem to be no solutions and the other editors I know don't seem to have this problem.
    I know there will be a bit of a shift but this is MASSIVE. At the moment I add a whole extra adjustment layer to all my clips to get it approximately right, but ofcourse this does not solve the issue nor does it give proper results.
    Please do not reply with the "You need a real reference monitor via SDI etc etc ..."
    By my logic on the same screen the program monitor should resemble what is going to be the final result in a relevant player like Quicktime X which all normal apple consumers use to watch their films.  I know VLC and Mpeg streamclip gives different results, but mostly when playing Quicktime/h264 files Quicktime will play it thus average users ( the people I'd like to downwload/buy my films )will watch it in Quicktime.
    Furthermore, Quicktime X's gamma/color looks very similar to the image I get on Youtube or Vimeo - which is where all my current work is going. I'm not outputting to boradcast or DVD etc.
    Strangely enough the MPEG 2 stuff I've done for DVD matches the Youtube output with the Program monitor.
    What am I doing wrong?
    I have a Dell 2711 wide Gamut Display which is calibrated with an SPyder 3 Elite using its full colour gamut ( close to 90% of Adobe RGB - thus bigger than sRGB or Rec709) Could Premiere be ignoring the calibration in the Program monitor and making the image values 16-235 and then Quicktime uses all  values 0-255? If so, how can I fix this?
    Any help will be much appreciated!

    I know this has been a while so hopefully you found some help by now, but maybe this will help anyone stumbling across this.
    What people seem to be missing in what you are asking is... this is the same file, on the same monitor, but with a different appearance in different software.  It is not a question of whether the overall monitoring is GOOD, and it is not a matter of hardware settings (as that would most likely propogate across all software) it is that it is not CONSISTENT side by side on the very same monitor.
    I had very similar issues that really seemed to get worse when we got new monitors, which is what lead me to chime in here.  The monitors were also wide gamut displays.
    The problem is likely this...
    1. The difference being shown are the difference between software that properly color manages (i.e. Premier or After Effects) and software that does not (i.e. Quicktime or some web browsers)
    2. The reason it is so severe is that the wide gamut monitors are able to show many more colors and thus the difference between the managed and unmanaged software is much more exagerrated than on regular gamut monitors.
    I found this great link that helped calm my nerves and helped me get handle on much of what is going on.
    http://www.artstorm.net/journal/2009/07/color-management-wide-gamut-dell-2408/
    Now that is not to say that the 0-255/16-235 issue is not also involved here.  It is definitely possible that a specific codec or compressor is part of the problem, but it sounds like it starts with the color management issue first.
    I hope this helps. 
    Andy

  • Sluggish timeline and glitching/freezing program monitor in Premiere Pro CC 8.1

    Hi all,
    I've recently switched from CS6 to the 2014 Adobe CC due to a student license expiring. I'm also somewhat new to r3d workflow so chances are I may be doing something wrong.
    I've worked on one other project with a mix of r3d and DSLR footage in CS6, but this is my first time cutting with red footage in Premiere CC.
    *Apologies in advance for the novel, but I figured I'd be as thorough as possible to hopefully help get this issue resolved for myself any anyone else who's experiencing this.*
    I'm cutting a 9:30 "party mix" in a music video style edit. So far I've had several (seemingly random) issues and glitches, that have been making my life exceptionally difficult and this 10/30 deadline exceptionally scary.
    I'm working with content that we captured using exclusively RED Epic Dragon, and Epic Mysterium cameras. We recorded with several different frame rates, with varying resolution, compression, and aspect ratios. Project was set in-camera to 23.976.
    Issue #1
    I've created a nearly two hour, organized roll of sub-clip selects in a RED R3D 2K 23.976 16x9 timeline, in which i'll use to browse my raw media when sequencing on a timeline stacked directly below.
    Often times when pulling clips from one timeline down to the other, the over-all responsiveness of the program will become ultra sluggish. Causing a clip (that's being dragged/placed) to lag heavily, maybe a couple seconds behind my cursor. This issue will often resolve itself after maybe 5 minutes or so, but makes fluid sequencing rather difficult.
    Issue #2
    The other issue I'm having is a glitchy or completely unresponsive program monitor. Again this issue appears to be totally random, and seems to happen most when I'm deep into some really intense sequencing/ clip arrangement, and scrubbing quickly.
    Usually a portion of a single clip (or sometimes a couple clips) will freeze up in the program monitor while I'm scrubbing over them on the timeline. This will sometimes cause them to freeze all together during playback as well as cause surrounding clips to lag a bit (maybe 4-8fps).
    I'll scrub back over the problem area and sometimes get a solid green bar halfway through my image, usually right before the program monitor just reads solid black throughout the entire timeline. This issue is temporarily resolved by restarting the program (about every 15-30 minutes).
    Issue #3
    As I'm scrubbing I'll also experience heavy glitching with both my image and the program monitor GUI itself. However, this issue typically wont affect playback.
    I've uploaded a quick camera-phone video of this issue as it's a little tough to describe Program monitor glitch - YouTube
    I know the timeline is un-rendered in this sample, (but this issue happens either way).
    Two painstaking weeks later, I've finally completed the first pass.
    Working on revisions now, and ultimately I'd like to copy paste the sequence into a 4K timeline for before After Effects work and export.
    I tried pulling it into a 4K timeline (with playback set to 1/8 res) and the issues stated above got 10x worse.
    Sticking to the 2K timeline for now (with playback at 1/4 res)
    P.S. I'm also cutting a much simpler corporate project with 5DMKIII footage and having no real issues.
    As for my rig,
    I'm running Adobe Premiere CC 2014 v8.1
    Freshly installed Windows 7 Professional SP1 PC Desktop
    Freshly installed Samsung 1TB SSD running my OS and Adobe CC
    Intel Core i7-2600k CPU at 3.4GHz (8CPUs) - Watercooled
    16GB Ram (3gb allocated for other programs)
    Nvidia GeForce GTX 570 4GB GDDR5 - 3.40.62 Drivers installed
    Pulling media from 2x 3TB Seagate Barracuda 7200RPM drives, striped at RAID 0
    Thanks for reading!
    -Sam

    So it seems to be behaving slightly better in "Software Only"
    Though slightly less frequently, I'm still running into the issues stated above, mostly issue #2.
    I also have a new problem to add to this thread as I'm starting to pull clips into After Effects.
    First being that (again, seemingly random) dynamic-linked clips decide not to show up on the timeline in AE, and then seem to vanish from the program monitor in Premiere as well.
    As you can see in the screenshots attached- After Effects see's the media itself from which the clip came from, however it won't show up in the monitor.
    I'm also having issues where I'll render the Premiere project with the dynamic linked clips that DO work, and then as soon as I restart the program, those previews are gone and I have to re-render the the AE Linked comps.

  • Lines and title flashing across the program monitor and in final export

    I'm seeing very thin lines flashing across the program monitor when playing a complex sequence with 7 video tracks. They draw at various angles and span the entire screen. There can be one or more showing at any time. They are colored and each line appears to be only one color, but different lines can be different colors. Some lines are solid, others are dashed. There is also a ghosty-white representation of one of my titles flashing around the screen for only a frame or two, then it flashes somewhere else.
    Sequences and Tracks:
    Base Sequence: AVCHD with disolves and color correction
    Next Sequence Layer: Base Sequence placed on tracks 1 and 2. Motion is applied to both tracks. LInearWipe and Opacity are applied to Track 2.
    (This creates an image in the center of the screen with a reflection.)
    Next Sequence Layer (1st track of the final 7): Animates Basic3D and Motion (position, scaling)
    2nd, 3rd and 4th of the seven are just like the1st. So there are 4 video screens flying around with reflections and perspective. Kind of like the iTunes album art widget - screen flies in, goes center stage, then flies back.
    Layers 5 to 7 are titles. They are also nested sequences having reflections and Basic3D, but their positions are not animated.
    My system:
    Phenom II x6 1055T
    8 Gb DDR3 1333
    3 Drives 7200 rpm (one program, one preview/conforming, one video)
    nVidia GeForce GTX 260 (3 fans attached)
    3 Case fans plus the side is open - running very cool
    MSI 890GXM-G65 Mobo
    My Project:
    Originated as a CS4 project, opened with CS5 and converted (did not import). Fixed all the title screwups, missing fonts, graphics, hooked up the off-line media etc etc. There are a couple of 1.5 hour nested AVCHD multi-camera sequences which look and play great. Then there are 2 of these monster sequences which are actually used as DVD menus and are about 44 seconds each. When I render these 7 layer menu sequences and play them back, these lines start flashing across the screen.
    Of course the GTX 260 has the GPU unlocked and that works great for the 1.5 hour programs. But if I attempt to render the 44 second monsters Premier stops responding and I have to EndTask it (all CPUs drop to idle while not responding). These monster sequences might test the power of the Quadro CX. So when I work with the menu sequences, I set Premiere to use software GPU and not MPE. Then I can render (2 hours render time to preview 44 seconds with six cores at near 100%). So it does render, slowly.
    I'm exporting an mpeg2 file now and will let you know if the lines show up in the final rendering. I can see the lines showing up on the MediaEncoder's small preview screen as it renders. Doesn't give me comfort.
    OK worst case scenario. The lines ARE in the final mpeg2 file. Makes the file unusable garbage...
    Is anyone else seeing flashing lines and titles?
    Here's a link to a still from the export to illustrate the artifacts.(face and name were blanked out by me)
    http://img23.imageshack.us/img23/5051/premierecs5lineandtitle.jpg
    Thanks

    The crop workaround was successful for removing the lines - worked great. There was the issue of the ghost text which you can see in the screenshot link provided above. This was not removed by crop. Crop removed the lines, but not the ghost. Thankfully, the 4 point garbage mask did work on the ghost and I was able to eliminate it. I had to apply the garbage mask on the sequence where Basic3D was applied not its parent sequence where VerticalFlip was used. The most important thing is that I've successfully migrated this CS4 project to CS5 and can now take advantage of 64bit processing (more RAM) to tame the beast. I'm using this sequence as a menu for a series of DVDs so my time expended will pay me back again and again.
    The asset generating the ghost was built like this...
    In the titler: Text was placed over a logo (.tiff file for logo and it was scaled and moved)
    Base Sequence: Title was brought to two, stacked tracks. VerticalFlip, and LinearWipe were applied to one which was then moved to look like a reflection of the other
    Next Sequence: Layed the Base Sequence down. Applied Basic 3D and moved it's XY position. (This is where I applied the GarbageMask to remove the ghost)
    I tried separating the logo from the text thinking that the logo feature of the titler might be the problem. So I used a separate video track and pulled in the .tiff file directly. It didn't eliminate the ghost. Applying the GarbageMask to the base sequence also didn't help. It was only after Basic3D was applied that the ghost would appear. And since I have Basic3D applied to other reflected text-only layers which do not exhibit the ghost artifact, the bug has something to do with the text/graphic combination with VerticalFlip and Basic3D.
    To top it all off, I can no longer recreate the problem. I've turned off the garbage mask and it's not showing up. While I was testing, the ghost was easy to recreate, but now I can't do it. So I don't appear to be able to drill down deeper. Perhaps it will come back at some point and I can test it further and update this thread.

  • Black Bars in Program Monitor - Why?

    Todd Kopriva, from Adobe, has just done a nice TUTORIAL, addressing "black bars," around the image in the Program Monitor. Todd uses PrPro CS 5.5 for his demo, but nearly everything, save a few mechanical differences, will apply to other versions of PrPro, and also PrE. The concept is exactly the same, really for almost any NLE (Non Linear Editor) program. If you get into the mechanics, and realize that you cannot find something that Todd mentions, it's either not in your version of Premiere (like Sequences in PrE - there, think about Project Presets instead), or is located elsewhere, and you need to consult your program's Help File.
    For a little more info on PAR (Pixel Aspect Ratio), that Todd touches on, see this ARTICLE.
    Remember, some of the mechanics might be different in your version of Premiere, but the concept is exactly the same.
    Hope that this explains those black bars, where they came from and how to address them.
    Hunt

    As Jim's answer indicates, some codecs enforce specific dimensions. Most relevant here is the fact that codecs intended for television are strictly constrained to the sizes for television standards. You have chosen an NTSC (National Televison Standards Council) codec in the Video Codec menu, which gives a rather strong hint that this is one such constrained codec.

  • Program monitor goes blank when editing certain clips

    A few days ago a 2 new problems occurred.
    1.
    The project I have is sett to 720, 24 fps.
    The clips I use is from 5D MK3, shot in 720, 50fps.
    Some of the clips I made duplicates of, and interpreted to 24fps for a slomo effect.
    The 24fps clips works fine on the timeline. But the one that still has 50fps will go black in the program monitor when I try to edit them on the timeline.
    It doesnt matter what I do, ripple edit or just shorten, still gets black. If I drag the marker over tha clips it shows fine though, but when editingt hem, just black.
    2.
    The second problem is regarding the very last clip in the timeline.
    The last frame, orjust some visual error after the last frame, now has the right part of the program monitor screwed up. A part of the screen is black.
    All this started like 2 days ago, after I upgraded my 2xSingle license to full CC. I had PS and PPro before.
    Whats going on?
    Some facts:
    - Premiere Pro CC 7.1.0 (141) - All updated
    - Win 7 64bit (all updated as of 2013-11-30)
    - 64 GB ram
    - Clips from Canon 5D MK3, 720, 50fps, IPS codec
    - No other software running, restarted several times
    - Geforce 480GTX, Asus P9X79, Intel Core i7 3820 3.6 GHz, Corsair 32GB (4x8192MB) CL10 1866Mhz
    - GeForce Drivers 331.82
    - Never had this problem before
    - Mercury Playback Engine GPU Enabled (disabled doesnt solve the problem)
    Please Advice
    // Magnus Svensson
    2 screenshots

    As I wrote, " I can drag the ends of the in/out points, BUT I cant drag the selected area in the source monitor"
    Again, the source monitor was just a comparrison, to show that this wasnt a problem only with the program monitor. I posted the image since you didnt understand what I meant.
    There are apparent issues with inserting theese clips on the timeline or editing them. I'm sorry if my bad english messes this up
    I guess you'll have to include all the info I have written to get a grip of the situation, so I will try to clarify again for you, if you think it will help
    - The project I have is sett to 720, 24 fps.
    - The clips I use are from 5D MK3, shot in 720, 50fps.
    - Some of the clips I interpreted to 24fps for a slomo effect.
    - I have QT installed
    - All drivers updated
    - The interpreted 24fps clips works fine on the timeline.
    - But the one that still has 50fps will go black in the program monitor when I try to edit them on the timeline.
    - It doesnt matter what I do, ripple edit or just shortens/makes longer, it still gets black.
    - If I just drag the marker over the clips in the timeline it looks fine.
    - If I interpret to 1-48fps, it works fine. Only 49-50 fps screws it up
    - Some problems occur in the source monitor. I CANT drag the full grey selection with the handle in the middle I made with in/out points, as shown in the picture
    - I tried to make a new project, same problems.
    - Everything worked fine a cople of days ago
    I hope this makes it easier to locate the issue.
    Thanks

  • Source monitor smooth program monitor jerky

    Hi, just checking to see if someone will have an idea of why my video has a playback problem. It plays very smoothly in the source monitor but in the program monitor it is not very smooth at all. Even when I go to highest quality playback. It actually seems to run smoother on that Automatic quality. If I attempt to the shuttle button, it will advance the verticle time indicator, but the image in the window freezes.
    I'm using Premiere Pro CS4. I have 2 1tb hard drives, 2.1g processor, and 4gb of RAM. It has worked perfectly in the past. I haven't been editing video for about 2 months, and when I started editing again today, these things were noticed.   

    Hello Bill,
    Yes there was a red line above the clips in the timeline. I hit the enter key to begin rendering and when it finished, the video played smoothly in the program monitor and source monitor using all three available video qualities in each.
    The AV files were raw digital video downloaded to my computer hard drive from a 16gb class 4 memory card. It was shot using a Canon VIXIA HF200 using FXP mode. It was brought into Premiere as a DV- NTSC standard 48KHz preset.

  • Program monitor and source monitor display issues

    Hello, my program monitor is displaying strange colours (inverted?) when playing video. In addition, the source monitor will never display any video although audio plays back fine.
    I am running on a Lenovo ThinkPad X200 laptop with Windows XP 32-bit and an Intel X4500MHD video card with the latest Lenovo-certified driver version.
    From my testing, this problem appears regardless of project settings, file/footage settings, etc. I originally had the K-Lite codec pack installed although I have uninstalled that with no luck.
    This problem surfaced from the moment I opened Premiere after first installing it and I have tried reinstalling the program, my video card drivers, and uninstalling the previously mentioned codecs.
    Also I have a thread on this at the DVinfo forums which has had many responses although no working solution.
    http://www.dvinfo.net/conf/attend-world-premiere/141131-weird-problem-program-monitor-pict ure.html
    DxDiag file here - http://www.dvinfo.net/conf/attachments/attend-world-premiere/10719d1234000711-weird-probl em-program-monitor-picture-dxdiag.txt
    Images in this post - http://www.dvinfo.net/conf/991137-post2.html
    Thanks

    I would try whether killing these processes will help. It may well be that when you kill them all you may encounter hangs, because one or more may be needed for your machine. I would start by killing all Lenovo processes. One would expect that one of these processes may cause your problems, but unless you try it, you can't be sure. Unfortunately I don't have a Lenovo, so I can only guess.
    Process PID CPU Description Company Name
    System Idle Process 0 75.00
    Interrupts n/a Hardware Interrupts
    DPCs n/a 0.74 Deferred Procedure Calls
    System 4 0.74
    DTS.exe 1868 Data Transfer Service
    ibmpmsvc.exe 1880 ThinkPad Power Management Service Lenovo
    AtService.exe 1912 AFSS Service AuthenTec, Inc.
    rapimgr.exe 4452 ActiveSync RAPI Manager Microsoft Corporation
    unsecapp.exe 4628 WMI Microsoft Corporation
    Smc.exe 712 Symantec CMC Smc Symantec Corporation
    SmcGui.exe 3640 7.35 Symantec CMC SmcGui Symantec Corporation
    S24EvMon.exe 764 Intel(R) Wireless Management Service Intel(R) Corporation
    ccSvcHst.exe 1416 Symantec Service Framework Symantec Corporation
    AcPrfMgrSvc.exe 1764 Access Connections Profile Manager Service Lenovo
    EvtEng.exe 396 Intel(R) PROSet/Wireless Event Log Service Intel(R) Corporation
    openvpnas.exe 796
    mdm.exe 1056 Machine Debug Manager Microsoft Corporation
    RegSrvc.exe 1432 Intel(R) PROSet/Wireless Registry Service Intel(R) Corporation
    Rtvscan.exe 2104 Symantec AntiVirus Symantec Corporation
    tvt_reg_monitor_svc.exe 2136 ThinkVantage Registry Monitor Service Lenovo Group Limited
    TPHDEXLG.exe 2164 ThinkVantage Active Protection System - HDD Logger Module Lenovo.
    TpKmpSvc.exe 2176
    tvttcsd.exe 2212 tvttcsd Application Lenovo
    rrpservice.exe 2228 rrpservice Module
    rrservice.exe 2256 Rescue and Recovery Backup Service Lenovo Group Limited
    tvtsched.exe 2268 ThinkVantage Scheduler Lenovo Group Limited
    UpdateMonitor.exe 2292 Fast Restore Application Lenovo Group Limited
    WLKEEPER.exe 2384 Intel(R) WLANKeeper SSO Service Intel(R) Corporation
    AcSvc.exe 2428 Access Connections Main Service Lenovo
    SvcGuiHlpr.exe 3204 Access Connections SvcGuiHlpr Application Lenovo
    PWMDBSVC.exe 2504 PWMDBSVC Module
    SUService.exe 2656 ThinkVantage System Update Service Lenovo Group Limited
    PresentationFontCache.exe 4940 PresentationFontCache.exe Microsoft Corporation
    tp4serv.exe 3316 PS/2 TrackPoint Daemon Lenovo Group Limited
    TPOSDSVC.exe 3444 On screen display message generator for ThinkPad Lenovo Group Limited
    TPONSCR.exe 3108 On screen display drawer Lenovo Group Limited
    TpScrex.exe 3144 ThinkPad UltraZoom Lenovo Group Limited
    ACTray.exe 3100 Access Connections Tray Application Lenovo
    tpfnf7sp.exe 3368 Presentation Director Fn+F7 handler Lenovo Group Limited
    TpShocks.exe 1184 ThinkVantage Active Protection System Lenovo.
    LPMGR.EXE 3928 ThinkVantage Productivity Center Manager Lenovo Group Limited
    LPMLCHK.EXE 732 ThinkVantage Productivity Center MailChecker Lenovo Group Limited
    Amsg.exe 992 Message Center LENOVO
    ccApp.exe 2960 Symantec User Session Symantec Corporation
    scheduler_proxy.exe 3028 scheduler_proxy Application Lenovo Group Limited
    cssauth.exe 3060 CSS Authentication Provider Lenovo Group Limited
    igfxtray.exe 2992 igfxTray Module Intel Corporation
    hkcmd.exe 2272 hkcmd Module Intel Corporation
    igfxpers.exe 1048 persistence Module Intel Corporation
    jusched.exe 824 Java(TM) Platform SE binary Sun Microsystems, Inc.
    ZCfgSvc.exe 912 Intel(R) PROSet/Wireless Zero Config Service Intel(R) Corporation
    iFrmewrk.exe 1296 Intel(R) PROSet/Wireless Framework Intel(R) Corporation
    wcescomm.exe 1844 ActiveSync Connection Manager Microsoft Corporation
    ONENOTEM.EXE 364 Microsoft Office OneNote Quick Launcher Microsoft Corporation
    PWMUIAux.EXE 5144 Power Manager Lenovo Group Limited
    7zFM.exe 2820 7-Zip File Manager Igor Pavlov

  • Source monitor displays a different size to Program monitor in CC2014

    I have imported a clip and the source monitor displays a different size in the program monitor?
    Thanks Chris

    It looks like your sequence is set up for the wrong size. Select a video file and right click 'New Sequence from Clip' see if that helps. I see that your video material is HD did you set up the sequence to match the earlier stills? that might be bigger than HD? If that is the case make a sequence the size for the video and use 'scale to frame size' for the stills.

  • Program Monitor Problems

    I'm new to CS4 & NLE altogether. I am working w/RED source footage on an iMac; have the RED Codec; set res to half.
    THE PROBLEM: Tho I have set the view in the Prog. Monitor to "fit," it changes with every clip I bring into the timeline. Sometimes it fits, other times it shows up a tiny rectangle with a black pasteboard around it, even tho the setting is still "fit." Or the rectangle will be larger but still framed in black. I have discovered resizing the image, but it often goes back to another size. This is ungodly frustrating.  Help!

    Can't say I've ever seen the behaviour where a timeline clip affects the view magnification of the Program monitor.
    Care to post say 1 or 2 seconds of RAW footage so we can try it in our versions? If you don't have a file-drop, I'm happy to loan mine.
    MP

  • PP Program Monitor displays with a color cast

    Hi all,
    Having trouble with the display in the Program monitor. I'm working with still images at the moment. All the images have a strong blue cast when previewing. They look fine when exported, or if you click on the image to reposition, the color seems to correct, but as soon as I play the sequence the color cast comes back. Also, getting the same cast with .AVI video.
    I am only having this issue on my laptop, all works fine on my desktop PC. Both machines are PC's running vista. I've also tried clearing my preferences and reinstalling PP. No luck.
    I'm working in NTSC DV now, but have tried creating projects in HDV and others, and still have the problem.
    Also, I've tried resizing the images, changing color spaces, etc, nothings worked. The images now are jpegs.
    On another side note, opening the reference monitor causes PP to have an unexpected error and crash. Every time. Although this is not really the issue I am worried about at the moment, it might be relevant?
    I've posted a sample of what the preview looks like here: www.jessicamans.com/PremierProCS4Issue/index.html
    Thanks in advance for your help!
    Jessica

    Sounds like an overlay issue. Video card and drivers?

Maybe you are looking for

  • Htmldb page with 'File Browse' hang on submit change

    I have a htmldb page with 'File Browse' item. With File Browse empty, on pressing submit button with which has 'SQL UPDATE' action and returning to same page branch, the page hangs. It also happen on File Import page of htmldb application itself with

  • What media player for Mac has Speed Control and can open WMA?

    Hello, I recently changed from PC to Mac and I am working on my thesis transcribing interviews that come in a .wma format. So I need a media player for Mac that has both Speed Controlers (so I can slow down the audio to transcribe them) and can open

  • Cost estimate component qty is zero

    Dear experts, I have one Raw material is assigned to many finished products, When I try to calculate the cost estimates for the finished items, The calculated qty for my raw material appears for some finished items and some is not appear (zero). And

  • Want to load OSX.4 from iBook into my G4 Powerbook

    I purchased an iBook with OSX.4. I took the install disks and went to install OSX.4 onto my powerbook and an ALERT came up saying I cannot USE THE DISKS.... WHY????? Is ther a way to OVERRIDE THE ALERT or is OSX.4 ibook install disks only for iBook?

  • Problem with using Photoshop Elements as external editor

    I am currently trying out Lightroom 4 prior to (maybe) buying it. I have set PhotoshopElementsEditor.exe as my external editor preference, but when I try to use it, I get the following eror message:- Unexpected error performing command; bad argument