Image is to fast and the sound is played correctly..........

I have a JVC GY100 HD camera and I want to import material onto Imovies HD but every time I try the video play to fast and the sound play correctly. I have tried to change the frame rate but this doesn´t make a difference ...... Please help!!!!

It sounds like the Audiobook's playback speed was changed. You can change it by tapping the audio book artwork, locating the speed control that can be found under the right side of the scrubber bar. Then adjust as needed.  The options as 1/2x, 1x, and 2x.
B-rock

Similar Messages

  • The sound on my iPhone isn't working I tried putting headphones in and it worked, but as soon as I take th out and the sound countinues playing the sound stops help please

    The sound on my iPhone isn't working I don't understand why it was working fine an hour ago I haven't dropped it or anything simply just out it on silent... The music I was trying to listen to didn't want to make a sound when I turned it in , I put a pair of headphones in and and it worked as soon as I took it off it completely stopped the music was playing still I could see it in the top column that  the play button was on ... Then I made a call an the same thing happened I turned it on speaker and then I could hear them... The sound is completely off even tho i looked at the seettings and put the volume on high noting is sounding on its own not even when i tap the buttons... I took it off the silent before I tried this stuff I don't understand please help !!!

    make sure that your head phones are not attached to the phone then use the volume buttons on the side, if when using them you see a pic of headphones on the screen, then you have some lint in the headphone jack, use some compressed air and blow it out.
    If you dont see that then try to reset the phone, hold down the home and power buttons for 20 seconds or untill you see the silver apple.
    If you are still having a problem restore the phone and set up as new to see if that clears it up.
    http://support.apple.com/kb/ht1414

  • Hey guys apple need to sort this issue people are buying new phones here and the sound not playing from there phones like alot of people are having the same problem apple are ignoring it. I went to an apple shop for them to want 150 pounds of me

    Hey guys apple need to sort this volume problem out soon like there is guys who have just bought new phones and it is happening to there's.i went to an apple shop for them to tell me I had to pay £150 to get it replaced I don't want a replacement so clearly they know what the problem is apple need to review this site and act fast before they loose alot of customers.

    If you just purchased your iPhone, it will still be under warranty and Apple will replace it at no charge assuming that there hasn't been any damage due to abuse. So anyone with a new iPhone will be taken care of. If your iPhone is out of warranty and it has a hardware problem, then you have to pay the replacement charge regardless of what the problem is. Apple does not repair individual iPhones, they replace them. If you want the iPhone repared rather than replaced, you'll need to send the iPhone to an independent repair shop.
    Since you don't say what "volume problem" you're referring to, though, we can't say whether or not this is indeed a hardware problem. Perhaps if you'll detail the problem and what steps you've taken to try and correct it, someone can offer advice.
    Regards.

  • TS1362 Please provide assistance with Itunes 10.7 and the songs not playing correctly-jumping and missing.I did not experience this with Itunes 9.2

    Please provide assistance and guidance as I have recently just downloaded Itunes Version 10.7(much to my regret!)and now experience all types of sound issue-problems such as jumping,skipping and generally poor audio.
    I have tried all the driver checks,music enhancer and equilizer de-activation on Itunes and defragmented my computer,but the issues are still there.
    I have had NO problems with Itunes 9.2 in the past and now when I tried to re-install 9.2.;the system will not allow me to downgrade.
    Is it advisable and poosible to downgrade without any loss of Itunes material?
    Any suggestions as to how are would be able to resolve this OR is this an issue that is widespread and Apple need to address in a further upgrade?
    Thank-you!
    Despondent

    To roll back to iTunes 10.7 first download a copy of the installer from here, uninstall iTunes. Probably best to also remove other suppporting software, e.g. Apple Application Support, Apple Mobile Device Support & Bonjour. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
    See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
    tt2

  • I rented a movie on iTunes (Fast and Furious 6) in HD and the sound quality is absolutely terrible the sound is like 4 seconds behind can I fix it?

    I rented a movie on iTunes (Fast and Furious 6) in HD and the sound quality is absolutely terrible the sound is like 4 seconds behind can I fix it?

    Hi jvito2869,
    Thanks for using Apple Support Communities.  This article has some steps you can try if your audio is out of sync with the video you rented:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    If your rental has already expired and you were not able to resolve the issue, you can report it to the iTunes Store as described here:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Cheers,
    - Ari

  • HT1657 I rented a movie and the sound doesn't work, how do I fix it?, who do I direct to for a complaint?

    Hi, I rented warhorse HD, and the sound doesn't work, my itunes version is 10.6.1(7). How do I fix it or who do I direct to get my money back? Thank you

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    Will u help me or not?

  • I rented a movie on iTunes and the sound is out of sync and the movie has now been removed?

    i rented a movie and the sound was out of sync i reported  it and got no respone and now the movie has been removed, help please??

    Report it again using this link and ask for a credit.

  • I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions?

    I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions and not have to pay to have the entire main board replaced. Preferably something under $100.

    I don't think you're likely to find a set of external speakers that come with a microphone and plug directly into a USB port. There are USB audio cards that look like tiny flash drives but have microphone and headphone ports in them, to which you can connect a typical two-plug Windows PC headset with a microphone, or else you can connect external speakers and a stand-alone microphone. Those adapters typically cost under $10. I don't know anything about the quality of sound that can be expected from them.
    I have a Griffin iMic, which is much the same idea but larger, a bit more expensive (retail~$40), and perhaps delivers somewhat better sound quality (I hope so, but I don't know because I've never had occasion to try one of the little ones).
    http://www.google.com/products/catalog?oe=UTF-8&hl=en&client=safari&q=usb+sound+ card&um=1&ie=UTF-8&tbm=shop&cid=9618463009759678039&sa=X&ei=tgQoT5zYOMfZ0QHkiICw Ag&ved=0CHcQ8gIwAQ
    http://compare.ebay.com/like/320779457703?var=lv&ltyp=AllFixedPriceItemTypes&var =sbar

  • I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    The description says it all.    I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    Hi Normanwh,
    If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Regards,
    - Brenden

  • I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

    I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s.  Any ideas?

    Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
    http://docs.info.apple.com/article.html?artnum=42973
    http://www.kenstone.net/fcphomepage/idvd_6stone.html
    http://docs.info.apple.com/article.html?artnum=93006
    http://docs.info.apple.com/article.html?artnum=303550
    http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
    http://docs.info.apple.com/article.html?artnum=61636
    http://docs.info.apple.com/article.html?artnum=302925

  • I updated my ipad and the sound stopped working.

    I updated my ipad to IOS 8.1.and the sound stopped working. My sidebar buttons say soundeffects or soundeffects mute when I press them. On my control panel there is no sound bar. As you can see in this screenshot it is not showing a sound bar to adjust volume. HELP?!

    Update: Last night, I cleaned my headphone port & docking port. Reset Network Settings & General Reset all settings & reset ipad. Didn't work immediately & had some setbacks. I decided to wait to do the restore factory default for the next day, this morning. I decided to test the sound before proceeding. My sound is working correctly now & didn't need to resort to the restore factory default. All of the above worked but perhaps needed over night to really dry the rubbing alcohol used to clean the ports.?
    sound is working. Thanks so much for your help Diavonex!

  • HT3986 i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

    i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

    Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.

  • I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4

    I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4

    App Store->Purchased
    iTunes->Purchased->Download All

  • How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

    How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

    Try reset all settings.
    Settings > General > Reset > Reset all settings.  It won't delete any data.

Maybe you are looking for

  • How can I do a loop within a select statement

    This is my query Select distinct s.First_NM, s.Last_nm, s.Date_of_birth, i.Class_ID, i.Enrollment_begn_dt, i.Enrollment_end_dt, SUBSTR(TO_CHAR(i.Enrollment_begn_dt, 'MMDDYYYY'),1,2) AS MONTH, SUBSTR(TO_CHAR(i.Enrollment_end_dt, 'MMDDYYYY'),5,4) AS YE

  • Exporting raw files out of Aperture

    How does one go about getting the raw files back out of aperture? I know that when opening the external editor it opens up in Tiff or PDS. I want to get my original Raw file out to being working with out the processing of the raw file in Aperture. Ca

  • Camera profiles good, but not quite on?? D300

    At least with the D300 profiles. The in camera jpeg still looks better that the DNG rindered with the vivid settings in the camera profile. It is a much beter image than the ACR settings. Would there be anyway to get the settings out of the embedded

  • Does anyone know where I can get a .kdf file for a GPIB board?

    I have been unsuccessful at developing a .kdf file for an AT-GPIB/TNT board using a minimal operating system with no network on NT Embedded. I would like some help.

  • Oracle prefetch

    Hi, Q1>Whenever we execute some querries, there is a roundtrip time involved to get the desired data from server which is taking much of the execution time. Therefore we had to investigate on the problem and found out that ORACLE OCI allows prefetch