Image Issue (definitely not TV or cables)

How do u send it to Sony because that is the same thing that happened to ps4?

Hey there, I am pretty sure the answer is going to be that I have to send it in and incur the horrible out of warranty charge but here is my issue. Yesterday whilst mid game the screen just started doing this weird thing that looked like giant pixels flashing back and forth, and does it constantly. This doesn't look like the videos I have seen of people's display flashing, this is more extreme. I've done the usual TV and cable checks, and it does the same thing in 2 TV's, that both work with my PS3 and Xbox One, have tried HDMI cables which again work fine with the other consoles but not this one, and different ports etc.The thing that worried me most is that I connected to the console remotely with my Vita and it was still doing it when streaming to the Vita screen. So it definitely doesn't appear to be an issue with anything external, or any ports, it must be internal. The console is a launch model, it's never had a single problem, it gets played extensively and it hasn't been moved in months. There is no chance of accidental damage either. Any chance someone has had this issue and managed to fix it???????? Thankyou!!

Similar Messages

I have had over 5 time out err-3259 trying to update my Ipad 2 on my imac from last night and all this morning. Anyone else having this issue? It is definitely not my internet connection etc. Right in the end at 99% this error message comes out. Help

I have had over 5 time out err-3259 trying to update my Ipad 2 on my imac from last night and all this morning. Anyone else having this issue? It is definitely not my internet connection etc. Right in the end at 99% this error message comes out. Help

Hi, aliahfromauckland.
If you are still experiencing issues when attempting to update your iPad, see the article below.
iTunes Store reporting error - 3259
http://support.apple.com/kb/TS2799
Hope that helps,
Jason H.

ITunes Store image links do not display - previews & purchases do not work

PLEASE HELP!
Below are the images of what I am seeing.
And I promise you I have really made an effort to research and try to resolve this without success. I have even run iTunes on a completely seperate computer and a different login (both OS user login and iTunes store login) and have the exact same issue.
I have reinstalled with a reboot (several attempts), performed a winsock reset, followed procedures in TS4123 for LSP conflicts, I have cleared my cache, I have checked for Firewall issues, I have restarted my cable modem, I have copied iTunes store links to a browser to check that images are displaying - nothing resolves this problem.
Email support has only recommended what is already posted in communities forum and on the knowledge base.
I have seen that in past there have been posts related to this specific issue but were not answered (for what I found). It seems that unless you are having a complete white screen when accessing the iTunes store that there is no solution for a problem like mine??
Also only "Ping" will display all images for image links.
Thanks in advance for any help / feedback!
and
* .... I should reiterate that I can not make any purchases, save to wish list, watch or listen to previews.

Update:
Still trying to resolve this problem (been working on it for the better part of 2 days now)
KB - TS1379 ( http://support.apple.com/kb/TS1379 ) Also does not resolve this issue...
Still need help please.

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

Image resize quality not saved in Save For Web Preset?

L.S.,
I have been working on an Action to create 12 separate PNG's for further use in my icon-software. What I do is basically this:
Start out with a 256x256px image, save it for web four times in steps from 256, 48, 32 and 16px, (32-bit)
apply some masks / layers, save it for web again four times from 256-16px, (8-bit)
set the mode to indexed colour / apply other masks and layers, and save it for web again from 256-16px. (4-bit)
I let the sizing be done in the Save for Web step.
The 256-sized pics give me no problem as they are not scaled down.
The 32-bit pics give me no problem as they are scaled down, and antialias comes along, but they have 8-bit transparency: no problem.
In the 8-bit and 4-bit versions from 48-16px, I definitely want no antialias in the sized down versions. So I set the resize quality to 'Nearest Neighbor'.
However, Photoshop seems not to be able to remember different resize qualities in one Action.
In every Save for Web-action that I do, when I set it to resize, it does so. But the resize quality is not taken from the setting. It seems to be taken from the last used or recorded setting.
That is pretty annoying, because:
- When I let the downscaled ones of the first 4, be downscaled 'bicubic sharper'
- And I let the downscaled ones of the second 4, and third 4, be downscaled 'nearest neighbor'
Next time I run the Action, all downscaling is done by 'nearest neigbor'. That ruins my downscaled 32-bit icons - they get jaggy.
If I alter the steps in the action manually and set the first ones to 'bicubic sharper' again, suddenly all downscaled ones are done by 'bicubic sharper'.
That ruins my downscaled 8-bit and 4-bit icons: they get antialias, to lime green, and that shows...
I can save Presets in the Save For Web dialog, but as the groupbox already tells me: these presets only apply to the Image quality parameters, not to the sizing parameters. Those seem to be taken from the last run.
I have one alternative to this: before every Save for Web step, I downsize the image myself, and undo the history step after saving. It's quite some work and I would just rather see that the sizing parameters saved in the Preset!

That's never been saved as part of the S4W presets. Bloody annoying.

Gif image button/javascript not work in mac firefox

I have a GIF with an image map over it that launches a new
page with Javascript. It appears and workd fine in all browsers pc
and mac apart from firefox on a Mac where it does not appear.
Any ideas?
Thanks

Vasilius,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Error : oracle.jbo.NoDefException: JBO-25002: Definition oracle.apps.icx.por.schema.server.XXTBPoRequisitionLineEO of type Entity Definition not found

Hi, while extending EO, we are getting error "oracle.jbo.NoDefException: JBO-25002: Definition oracle.apps.icx.por.schema.server.XXTBPoRequisitionLineEO of type Entity Definition not found". We have placed class and xml files in respective folder, imported customization and bounced the system but still error did not go. Kindly help to trace the issue.

Can you elaborate how you deployed your custom code, were steps documented here followed ? Did you create a ADF library jar and copy it over to the application lib directory ? Please provide the exact steps done for deployment.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!

Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT5927 Using apple configurator with supervised devises, enabling iCloud/ find my iOS device (after being supervised), backing up that supervised / find my iPhone enabled image, --issue; unable to apply back up to any iOS device (including the orign. devi

Senario:
Need to manage 500 Enterprise iPads
Requirements;
1) Trackable via Find my iOS device (we have 500 iPads and with the 100 device limit per iCloud account for Find my iOS device limit we have 5+ iCloud accounts).
2) Individually named iPads for locating and sending commands to wipe, lost mode, etc.. on map per Find my iOS device (we uniquely name them in Apple Configurator either by using the "sequensetially numbering feature", or by creating individual back ups (yes, 450) with the name specified in the image).
3) Find my iOS device feature enabled in base Prepared or Supervised image (using one of our 5+ iCloud accounts) (image can be created during prepared stage, or in supervised stage) - tried both and have the same issue - which I am getting to...
4) VPP codes for paid apps (all VPP codes purchased with generic account which is the Apple Admin account for VPP purchases). Apple Configurator is set up under a different/ unique Apple account (i.e. not VPP admin account) and not logged into iTunes for any purchases/ services).
Issue: Can not do any following senarios;
A)
1) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Prepare stage (added during preparing stage)
2) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Supervised stage (added after supervising, and then backing up that supervised and iOS Find my iOS device enabled)
B) 1) Apply master image to any Supervised iPad (under senario step A) or senario step B)), including the (Supervised or/ Prepared iPad that was used to create the maset iOS 7 image
Result = fail with Apple generic code "4" ; This is obviously due to Find my iOS device feature enabled during image capture.
According to Apple (see Apple Config. Help) the 'Activation lock' (new feature in iOS 7) will not be enabled on a supervised device when an iCloud account with "Find my iDevice" is enabled. Their "help files" seem to imply after the device is Supervised, and a person (presumably and end user) adds thier own iCloud account with Find my iOS device enabled the activation lock is not enabled and erasing/ reconfiguring with Apple Configurator will not cause reimaging probhlems such as requiring the end user's credentials to reconfigure the device using Apple Configurator (i.e. you won't need the end user's credentials).
Needed: To be able to configure Supervised iPads with iCloud account (Enterprised owned iCloud account) configured on the basse image, which has Find my iOS device enabled, and to be able to apply that base image to all Enterprise iPads without generic apple error code 4 issue.

Hi all
I am trying to replicate these steps in my environment but I am having trouble getting an iCloud backup restored to a supervised device. Can someone clarify the steps? The parts I am unsure on are:
1) Do you Prepare in Configurator with all the institution owned apps? Or do you install them after restoring the iCloud backup?
2) After entering the personal AppleID to restore the iCloud backup, the setup wizard prompts for the Institution/Configurator AppleID, there is an option to 'Skip Now'. Do you enter in the password for the institution account? or do you skip that step?
3) What exactly is on the screen in the 'mini setup assistant' after the restore when you Refresh with Configurator?
Any help would be greatly appreciated!

Airport Extreme Base Station not cooperating with Cable Modem

The non-specific issues are by far the most frustrating and I can't make any sense of this. To be fair, this might not be a AEBS issue as much as a ISP issue, but any suggestions are much appreciated.
History: My setup has worked great for about 6 months, but recently I've been having intermittent problems (described below) that have been getting progressively worse and more frequent. The issues have not changed in relationship to firmware/software updates for the AEBS and airport utility.
Setup: Cable Modem (Time Warner Kansas City is ISP) --> AEBS (A1143 on the latest firmware) --> periodic wireless connection to imac, macbook pro and 2 iphones. A Time Machine (hard drive) is also connected to the AEBS via USB.
Symptoms:
-Intermittent disconnects and slowdowns over wireless
-Wired connections are completely unaffected.
-Loss of wireless internet connectivity is consistent through all devices.
-Time machine is unavailable when the internet is not accessible.
-During disconnects sometimes the router doesn't even appear, sometimes I can connect but can't reach my time machine or the internet, sometimes it won't accept my password and sometimes it times-out.
Sounds like the wireless transmitter is going out on the AEBS or something, right? Well, Apple was kind enough to replace my AEBS under warranty to try to solve this problem, but it hasn't gone away.
Could this be an issue with my ISP not distributing IP address properly or something? I'm not really very savvy with the way all that works.
Thanks for your help with this mess.

Its gotta be the surrounding interference issue. I found a macworld article that refers to testing the different channels in the 2.4gHz range and finding some completely unusable (as you mention). If I didn't have a couple iPhones that can't run 5gHz, I'd certainly bump up to that because apparently that's where the performance is!
Here's a link to the article, although it's mostly a review, though information within is pertinent to our issue.
http://www.macworld.com/article/59923/2007/09/airportextreme.html

Can I place an image in the Note section of Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tr

I want to place an image in the Note section of my Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tried copying and pasting, dragging and dropping.

From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
http://discussions.apple.com/thread.jspa?messageID=8482110
http://news.cnet.com/8301-13924_3-10026010-64.html
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
That won't solve performance issues, but should work.
http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
"My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista

Oracle DB 11g Release 2 Installation in Solaris OS for SAP - issue: Files not found

Hello All,
Having problem during my installation of oracle DB.
the installer keeps on prompting that files not found and the directories and files permission seems different from expected
I attached the images of the files the installer is looking for and also the /oracle/<SID>/11ginstall_11202.log
I also attached the thing i put in ENV command
Not sure if its the issue in the oracle profile or installer itself or wrong input
please help

Hi Frogoso,
Please have a check on the known issues SAP note for Oracle installation.
Section G: is related to Solaris
1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
You may re-check whether all the Solaris related pre-requisites are met before executin RUNINSTALLER.
Suggestion here would be to go with latest available Oracle patch 11.2.0.4 as you are installing a new system.
Hope this helps.
Regards,
Deepak Kori

Report Definition not found - calling a report from JDev.

Hello,
I have the following on my local machine:
BI Publisher
Jdeveloper
I created a report in BI publisher called Test1, and now I am creating a web service in jdeveloper to call it.
I am having issues with calling it from my jdeveloper.
here is the code I am using to call my report (below).
Since BI publisher is installed on my local machine I tried both paths but neither are working
1- final String reportAbsolutePath = "C:\\Test1.xdo";
2 - "http://aramamni-us.us.oracle.com:9704/xmlpserver/~administrator/Learn/Test1/Test1.xdo"
I am sure 2 will not work since System.out.println("calling " + myPort.getEndpoint()); returns
"calling http://localhost:9704/xmlpserver/services/PublicReportService"
I know the problem is with this line of code but I can't figure it out.
repResponse = myPort.runReport(repRequest,username,password);
    public static void main(String[] args) {
        try {
            bip_webservice.proxy.PublicReportServiceClient myPort = new bip_webservice.proxy.PublicReportServiceClient();
            System.out.println("calling " + myPort.getEndpoint());
            // Add your own code here
             final String username = "Administrator";
             final String password = "Oracle123";
             //final String reportAbsolutePath = "/Web Service Test/HR Manager/Employee Salary Report.xdo";
             final String reportAbsolutePath = "C:\\Test1.xdo";
            // Testing runReport
            System.out.println("Testing runReport Service");
            ReportRequest repRequest = new ReportRequest();
            repRequest.setReportAbsolutePath(reportAbsolutePath);
            repRequest.setAttributeTemplate("default");
            repRequest.setAttributeFormat("pdf");
            repRequest.setAttributeLocale("en-US");
            repRequest.setSizeOfDataChunkDownload(-1);
            System.out.println("1111111111111");
            ParamNameValue[] paramNameValue = new ParamNameValue[1];
            paramNameValue[0] = new ParamNameValue();
            paramNameValue[0].setName("EMP");
            System.out.println("2222222222");
            paramNameValue[0].setValues(new String[] {"20"});
            //paramNameValue[1] = new ParamNameValue();
            //paramNameValue[1].setName("p_job");
            //paramNameValue[1].setValues(new String[] {"CLERK"});
            repRequest.setParameterNameValues(paramNameValue);
            System.out.println("3333333333333");
            ReportResponse repResponse = new ReportResponse();
            System.out.println("4444444444");
            System.out.println(username);
            System.out.println(password);
            System.out.println(repRequest);
            repResponse = myPort.runReport(repRequest,username,password);
            System.out.println("55555555");
            String contentType = repResponse.getReportContentType();
            System.out.println(contentType);
            byte[] baReport = repResponse.getReportBytes();
            FileOutputStream fio = new FileOutputStream("C:\\temp\\test.pdf");
            fio.write(baReport);
            fio.close();
        } catch (Exception ex) {
            ex.printStackTrace();
    }Output -> Report Definition not found
calling http://localhost:9704/xmlpserver/services/PublicReportService
Testing runReport Service
1111111111111
2222222222
3333333333333
4444444444
Administrator
Oracle123
bip_webservice.proxy.ReportRequest@8238f4
WARNING: The received SOAP fault contains non standard fault element: "{http://xml.apache.org/axis/}hostname". This element will be ignored.
javax.xml.rpc.soap.SOAPFaultException: oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport Failure: Due to oracle.apps.xdo.servlet.CreateException: Report definition not found:C:\Test1.xdo
     at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:565)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:400)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:113)
     at bip_webservice.proxy.runtime.PublicReportServiceSoapBinding_Stub.runReport(PublicReportServiceSoapBinding_Stub.java:3733)
     at bip_webservice.proxy.PublicReportServiceClient.runReport(PublicReportServiceClient.java:173)
     at bip_webservice.proxy.PublicReportServiceClient.main(PublicReportServiceClient.java:84)
Process exited with exit code 0.Thanks for the help - what can i do to solve this.
Edited by: Rooney on May 25, 2010 2:57 PM

I tried to follow the suggestions provided in the earlier post and called the BI report from SOAP UI
but i am getting an error
oracle.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport for reportAbsolutePath [/users/weblogic/Sample/Training.xdo] failed: due to oracle.xdo.servlet.CreateException: Report definition not found:/users/weblogic/Sample/Training.xdo [username=weblogic]
I am not sure what is the issue.
Can you please guide me on the same?
Regards
AR

Frozen rogue image on macbook air: synced iphone, was asked to download from itunes, to restart, did this. when restarted there was photo of chocolate saying 'love you'. never seen image, it will not delete, the techs at work tried too. No luck.Virus?

frozen rogue image on macbook air: synced iphone, was asked to download from itunes, to restart, did this. when restarted there was photo of chocolate saying 'love you'. never seen image, it will not delete, the techs at work tried too. No luck.Virus? any ideas?

I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform.

IPhoto and/or Image Capture do not recognize iPhone 3G and/or 4

SYSTEM DETAILS:
Operating System: Snow Leopard - 10.6.6
iTunes 10 - 10.1.1 (4)
iPhoto '09 - v8.1.2 (424)
Image Capture - 6.0.1 (428)
iPhone (3G and 4) - iOS 4.2.1
OPEN USER ACCOUNT 1:
When connecting iPhones to Mac the following actions take place:
iTunes auto-opens
iPhoto auto-opens
iTunes begins synchronization
iPhoto recognizes iPhone and any existing photos on iPhone
Manually launching Image Capture recognizes iPhone and any existing photos on iPhone
OPEN USER ACCOUNT 2:
iTunes auto-opens
iPhoto DOES NOT auto-open
iTunes begins synchronization
iPhoto DOES NOT recognize iPhone
Manually launching Image Capture DOES NOT recognize iPhone. Image Captures gives following message: "No camera or scanner connected."
INTERNET SEARCH RESULTS:
Internet search results discuss restoring iPhone to factory defaults - Tried this - did not work
Internet search results discuss powering off/on iPhone - Tried this - did not work
Internet search results discuss deleting ~/Users/username/Library/Preferences/com.apple.iPhoto.plist - Tried this - did not work
ANALYSIS:
Based on this information, this is an issue isolated to the User Account #2. Recreating User Account #2 is not an option.
Any suggestions on how to reenable ability to transfer photos from iPhone to iPhoto and/or Image Capture appreciated.
Thanks.

I am having the identical error. I have an iPhone 4 and 2 macs, the phone is managed from an old G5 PowerMac and images are saved from it to Aperture for photos and videos go to iPhoto 11. The Mac is running 10.5.8. I last appear to have downloaded movies from iPhone4 to mac in December , the oldest video being 10 Dec 2010.
This week I was going to back up a handful of images on the phone but after connecting it to the mac, something that happens several times a week to sync to itunes for app updates etc I found it did not list for import options in iPhoto nor in Aperture. I looked at Image Capture and that tells me no device is connected.
I have no problems taking images off the phone using a MBP which has 10.6 and Image Capture recognises the phone.
I have tried the following after reading through all the discussions on the topic of which there appear to be many with this problem.
Restore the iphone then update settings from archive. - did nothing
Closed apps reconnected iPhone started apps... - did nothing
Switched phone off then on then connected to mac then opened apps - nothing
This Mac seems happy to communicate t othe phone though iTunes but appears to have lost the way when it comes to getting images off the iPhone. Any help keenly appreciated.
regards
Adrian

Image Issue (definitely not TV or cables)

Similar Messages

Maybe you are looking for