Image Limit in Picture Frame iOS 6?
I have a rather large image folder (a few thousand images) that I use for Picture Frame on my iPad 2. Since upgrading to iOS6 I noticed that Picture Frame was only displaying a couple dozen pictures repeatedly, something that was not a problem previously. Is there now an upper limit on the number of pictures that can be displayed from an image folder? (I noticed the same issue with the photo screen saver in Lion.)
I also tried breaking the folder into sub-folders of a thousand or less pictures, and choosing them all in Picture Frame settings for shuffle. That seems to display more images, but only seems to choose from one folder at a time.
I realize that this isn't exactly a critical issue, but such a seemingly arbitrary limitation is aggrivating, and I am curious as to whether anyone else has even noticed the problem, or has a good solution.
For what it is worth, I've encountered exactly the same problem. It seems to only want to select pictures from one folder, no matter how much I fiddle with the settings. The same photo set works fine in iOS 5.
Similar Messages
-
Adding video to a picture frame ( jpg image ) masking question
Hi guys,
I have an image of a picture frame, and I want to add some video inside the picture frame, but don't want the video to be seen outside the picture frame.
How would I go about getting the video into the frame ?
I have tried adding the "simple 3D " preset to my footage, and have put the video footage ON TOP of the picture frame later ( a simple jpg )
Is there a correct proceedure to doing this ? or am I on the right track here ?
I also notice one thing, - when I applied the Simple-3D preset, I can do a simple perspective on it.
I applied a 22 degree "swivel" on the video footage, which correctly aligns the TOP of the video with the picture frame, however, the bottom of the video is out of whack slightly.
On the bottom left, the video is perfect ( in the lower left corner of the picture frame ) however, on the right side ( bottom right ) the video is angled too much upward, and so there is a space there, and doesn't look correct.
What do you suggest ?
In photoshop, I would simply cut out the real photo from the picture frame, and put another image UNDER the frame and apply a simple masking to it, and this way it would be perfect, however I don't think this is how we can do it in Premiere ( ? ) I'm fairly certain about this, but could be wrong.
If I am correct, then somehow I need to skew the video slightly ?
Thanks for any suggestions,
Dave.Hi Jim,
I had the video under the picture frame, but parts of the video are still visible, ( in Photoshop I would simply mask out the area outside the frame, and that's it, it's done, but it seems in Premiere there is no such thing as this type of masking (perhaps ? )
Hi Steven,
I don't understand what you wrote, if I crop either the picture frame or the video, it won't look right. However, if I tweek the video just a tad, it would fit pefectly, however, when I do this to the video, just a portion of it sticks out from the picture frame in one area ( in Photos hop a simple mask would hide this )
Dave. -
Need picture Frame feature back for iPad running iOS 7
I am a wedding photographer. One of the main purposes of my iPad is to provide m clients same day iPad slideshows. I had been running iOS 5 on my ipad2 but upgraded to ios7. Previously I would use the picture frame feature to showcase images from the day. This feature allowed a slideshow to be left unattended and guests could get into the iPad unless the pass code was entered. Now the picture frame icon is gone in ios7. I am left with the slideshow feature in photos. But if someone touches the screen with that one, the show pauses and doesn't restart on its own. So I need the old picture frame functionality back.
That did not work, I went into the clock app, it has the weather in its map, and it's on englosh measurements. The notifaction center is still saying metric units, not English units.
Any other ideas??? please help -
When I place images in iBook Author, they are automatically assigned these properties: "Object Causes Wrap" and a "Picture Frame" stroke.
I don't want that and couldn't find where can I change it in the Preferences. Anyone has an idea?I've sent a feature request for a new version of Author:
When I place images in iBook Author, they are automatically assigned these properties: "Object Causes Wrap" and a "Picture Frame" stroke.
It would be great if I could be able to change it in the Preferences to "No wrap" and "No Frame" so I don't have to manually adjust every single image of my book - there are lots of them.
It would be really nice if Author implements "Layer's" concept like almost all graphic programs like Photoshop, Flash, Illustrator, etc. -
Images with Picture Frame stroke not printing?
Does anyone have a known solution to an issue in which an image with a stroke of "Picture Frame" applied will not print?
More details...
- Created pages document (originally in '08 version of Pages, then upgraded to Pages '09 to see if that fixed it -- it did not)
- Printed document in both both Pages version. All assets within document printed correctly with exception of photos that have stroke of "Picture Frame" applied.
- Printed to PDF. Opened and printed from Preview. Again, all assets within document printed correctly with exception of photos with stroke of "Picture Frame."
- Tried modifying print settings to "fit in page" as well as color correction. Same symptoms applied.
- One solution (that's not the desired behavior but should be acknowledged) -- removing stroke allows images to print.
Other:
- Problem is reproducible across both versions of pages.
- Problem may be same as seen in other searches found here: https://discussions.apple.com/thread/3005994?start=0&tstart=0 & here: http://forums.cnet.com/7723-21571_102-378574/pages-09-printing-problem/ & here: http://www.mac-forums.com/forums/images-graphic-design-digital-photography/23980 6-framed-pictures-wont-print-iwork-pages.html
Set-up:
- iMac running 10.7.3
- Started with iWork '08, updated to Pages '09
- HP LaserJet CP1025nw
Any advice much appreciated!Thanks for all your help, fruhulda.
Tried:
deleting plist
uninstalling Pages
trying a different account
updating firmware
trying a different printer
The only thing that works -- which also worked for you -- was something other than this printer. And even with a firmware update, it's not working.
I'd say this is an HP CP1025nw problem, which kind of hurts given it's a newer printer for us.
Suppose it's best to consider this closed and unsolved. -
Centre aligning images within picture frame using XML file
Hi
I am using a flash file that uses an xml file to upload a
series of images one at a time into a picture holder.
There are two different widths of the images. The height is
always the same. Is it possible to set this up so every image that
the xml file calls is centre aligned within the picture frame.
At the moment when using the xml file to load the image it
always left aligns the image when it brings it into the picture
frame even if you change the alignment to centre align within in
the align panel.
Does anyone have a suggestion why this is happening or how to
fix it?
Thanks for the helpYou're welcome. Pleased it worked.
All it does is use the MovieClipLoader class to load the
images into your holder_mc. Because loading takes time, and because
you can't check or adjust the size or position of images until they
have loaded, the MovieClipLoader class gives you a handy option to
run some code whenever its finished loading something you told it
to load.
That's what the addListener instruction does... it says
whenever myLoader has something new to tell me about the status of
the load requests I ask it to do... make it run some related code
in the listener object (which is called loadListener in this
code... it could equally be called something else). You 'listen'
for different events or updates of status. All I 'listened' for
here was the onLoadInit event.
The onLoadInit is the 'final' status update after loading. It
occurs when something has loaded and its properties are accessible
(_x, _width etc). The target_mc that is an argument for the
loadListener.onLoadInit is a reference to the clip that was loaded
into.
The best way to learn about this stuff is probably to read up
on MovieClipLoader in the livedocs and try google to see if there's
an online tutorial somewhere. Then give it a try yourself in
another new fla.
cheers
GWD -
Question about image size, canvas size and Picture frame
Hi,
This has always been a little confusing so let me describe what my question is:
Assume I have a created a new PSD that is 8 1/2 x 11.
The canvas size is the same 8 1/2 x 11.
I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border.
Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2. Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame
I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
Hope I made this somewhat clear.
Bob1: Decrease the size as you describe.
2. Go to File>New or Ctrl N
3. Make the box 8.5x11. Make sure the other data conforms to your image.
4. Now,holding down Ctrl-Shift, Drag the image to the new box and release the mouse. Your image will be centered in the box.
Note: there may be a method to do this including any adjustment layers, but I usually only do this as a last step, flattening a copy of the working file. -
How to create a fancy picture frame border around an image
Hi there,
Does anybody know how to create a fancy picture frame around
an image that's inside an AP DIV? I want the image to look like
it's a picture hanging on the wall. Any of your guru's know how to
do that - eh then?
Thanks a mill for any help!Find or use your graphics program to create an image of a
frame you like.
Size it so its inside measurements match your picture.
Option 1 - Paste your picture image on the frame image and
insert in your container.
Option 2 - Place your frame image as a non-repeating
background for your container and then insert your picture. -
Picture frame to surround an image
Isn't there same clever picture frame app or plug-in that I can use to put around a photoshop image?
I've got CS3 and am placing some Photoshop images into an InDesign document.
It seems to me that I've seen what I need before in either InDesign or Photoshop, but now that I need it, I can't find it.
Any help would be appreciated.
JohnHuman Software has a whole collection of 'ClassicFrames' which is a PS plugin with ten different series of frame types. While the frames really are pretty good, there is one major drawback. Even though they offer portrait and landscape versions, as most images aren't perfectly scaled to their basic proportions, as soon as the sides vary from those, one pair of sides gets thinner than the other. If you are close to 3:4 or 4:3 they work well. If your image differs greatly what you have to do is a bit of makeshift cutting and pasting. I always thought that limitation was a little hokey but still have used the frames on occasion. They have a series of circular and oval frames which work very well.
http://www.humansoftware.com/pages1200/ClassicFrame/HSclafram11.html -
Will iOS 7 on the iPad have picture frame on the lock screen? Please answer?????????????????????
Yes, unfortunately apple did get rid of picture frame with ios7 and a lot of people are complaining about it. Pretty annoying cos I like to use my iPad to display photos. Now we have to rely on third party apps.
I've tried quite a few and found that Picmatic is the one I like the most, plus there's a free version. You can get it here: http://goo.gl/rLOU1 -
Hi
Can anyone tell me how to enable the picture frame feature on the iOS 7??
I use this feature a lot whilst the iPad is charging. Thank you.
John SharplesOk tried it on your advice seeing as it updated October 9th. It is a bit better yet still not as esthetically pleasing as the pictureframe discontinued by Apple. The oragami transition on random fodlers was a great presentation. Music option was disppointing. To play music you have to go in, choose a playlist and choose each song you want or it just plays same one over and over. Odd dev choice to have a playlist then have user spend time making another playlist from the existing one. If I was using this for display in an office I would be annoyed after making multiple lists and folders depending on what I wanted to use it for then have to duplicate the effort again within the app.
One of my peeves is how 'improvements' typically create more time spent on part of the user from what was previously a simple, easy function. Looking at the upgrade options don't really see a benefit to going pro. Filters are cute but the layourt formats seem static. Maybe they are more dynamic but you couldn't tell from the info provided. If there was a screensaver just like the Apple one they got rid of I would pay for that. -
Can anyone tell me if I can get picture frame mode back on my ipad? Since downloading iOS 7 it's disappeared :(
You can't but you can set up a slideshow and your pictures. In that you can pick the pictures that you want, the duration each picture shows, and put it in a loop so it will repeat.
-
Digital Picture Frame- Some images are saying "Not Support"
Hello there, I recently purchased the Digital Picture Frame (DPF 10") for a gift. As I was setting it up by placing some photos on it with my USB drive. Some of the photos worked, while the others had a black screen that said "Not Support". I read some past forums on this issue, but it doesn't aid me. I was wondering if it is the size of the photo, the format of the photo, or even my laptop since its been holding these photos. Please and thank you.
i,
Please put the USB stick to you laptop and check them to see which format they are ? Many picture frames only support one or two formats.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Does anyone know how I might be able to access Picture Frame while being in Guided Access mode..?
I don't exactly understand your issue but if your stuck in guided access press and hold the power and home until you see your device turns off keep holding then when you see the apple startup logo let go (this is called a hard reset or a respring) this will force you out of guided access and into the home screen where you can unlock the device with out being stuck in guided access
If this does not help you please ignore this comment -
Error in Preferences.app - picture frame
I got a strange problem in my iPad 3rd gen. Since a couple of days the preferences settings page for picture frame is totally empty. At the lockscreen the picture frame button is still there but without any function.
Any ideas?Ummm,
The Preferences of iChat or Messages can start up the camera you have if the Preferences were left on the Video and Audio pane. It takes the title of the pane.
If the Preferences window shows the Video and Audio pane it has a Preview of what the camera sees.
Under this is a green response bar for the audio (your In Audio).
It has drop downs for the Mic selection, the camera if you have two cameras, a BlueTooth headset option and the Bandwidth Limit.
Example Pic
The man in the pic and the background may vary .
7:33 PM Saturday; May 11, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously
Maybe you are looking for
-
How come I can't print a full page using the fire fox "print" mode /
When printing, even in the print preview mode it only shows the middle of the page and I cannot print the entire width of the page ??
-
Walkman App Version 8.3.A.0.54
Is there a way to create a shortcut on your play lists? As opposed to opening the app, swiping right, selecting play list and the shuffle. On the previous version you could make a shortcut to your Favourites for example. Solved! Go to Solution.
-
Is there any function module to get the top or root org unit id? thanks!
-
When I open Chrome it opens VMware
So this has just happened recently, when I open Chrome instead of Chrome actually opening up it opens up VMware. It was working fine up until a couple days ago. Any help on how to fix this would be great or info on why it happned or how.
-
Creating an interactive dashboard in OBI with some specific criteria
we are new to OBI and want to create a dashborad which has two drop downs.. selection of the first value in the drop down list limits the values in the second drop down. and finally on the cilck of GO button, some metric has to be displayed. metric i