Image Location - Unavailable

Recently I tried to consolidate a project into one location that did not quite have enough memory to do so. Also recently, Aperture crashed while trying to erase a media card. Since one of these two events, it's suddenly decided that about 160 images from that project (not ones from that media card) are located on a LEXAR MEDIA CARD rather than on the drive where they are, in fact, located. Is there any way I can re-map them somehow? They were never in the Aperture library since I was travelling with a laptop and larger external drive. I haven't done much editing, but had spent a lot of time assigning keywords to these pictures and don't want to have to start over if I can avoid it... or would re-importing also import their data? Thanks!

I seem to have solved the problem. It no longer believes that the files are on the Lexar Media Card. It now believes they are on the external drive that they are on, in the location that they actually are. Only it refuses to see that the drive is mounted. I can see it in the import pane, and if I select the Project and 'Manage Referenced Files...' it shows the drive TWICE, once offline and once online with 319 images on the offline drive and 647 on the online drive. The 'Verify' and 'Mount' options are greyed out if I select the offline drive. However, I was able to locate one of the images in the lower part of the panel and then 'Reconnect All' seems to have eliminated the 'ghost' offline drive. Thanks for the help.

Similar Messages

My location services is already on as well as with my facebook apps, but still i am unable to check in. what's wrong? even with my maps, it always say location unavailable. help please.

my location services is already on as well as with my facebook apps, but still i am unable to check in. what's wrong? even with my maps, it always say location unavailable. help please.

- The iPod uses the location of a nerby or connected router to determine it location based on a database of routers and their location. It appears that the routers near y are not in Appl'es database. As of yet, nobody here seems to know how to get routers added to the database.
- If you go to Strtbucks. McDonalds or another networks does the location show in the Maps app?

When i scan my ipod from the application named find my ipod touch 4 it simply shows location unavailable while that of my cousin's ipod touch exactly shows the same location..... Why does that happen???

When i scan my ipod from the application named find my ipod touch 4 it simply shows location unavailable while that of my cousin's ipod touch exactly shows the same location..... Why does that happen???

When you go to the Google Maps app on the iPod does it correctly find your location? The iPod's locations service uses the location of the a nearby wifi router to locate te iPod. However, not all routers are in Apple's database and as of yet nobody here knows of a way to add routers to the database.

Extract Image in thrid-party System using Image Location

Hi All,
I am working in an Interface project. I need your help in one of the requirement.
The data will flow from third-party system as an XML file and we are using Webservice to extract the data.
The requirement is the third-party system will send the image location in the XML file and we need to extract the Image stored in the third-party system using that Image Location.
Is this feasible and if so how?
With Regards,
Gurulakshmi

Hi,
No. We will store the image in Livelink(Third-party Storage Location) and attach that image against SAP Notifications which is created using T.code: IW21
With Regards,
Gurulakshmi

Acces images located on a static web applications

HI everybody,
I need to put images and html pages on IBM http server, I've created for that a web static application that I've deployed on the http server. I have also a dynamic web appliocation running on websphere 6 where I've puted all my jsp and servlets. I've instaled the IBM http plugin and both servers seems to be communicating correctly.
my first question is: what is the best practices to access the images located on the webserver from my jsp files, I dont like the idea to use the full url:http://webserverIPAdress:port/staticContext/imagesFolder, is there a way to map the images folder path in my websphere application, or to tell the jsp page to go to the http server to lokup the image?????
The second questions , do I need to do somethig to manage the redirection of the users requests: I'm planing to make my webserver as the front facade, I mean if a user asks for html page he will get it from the http webserver, but if he is requestiong a servlet how the request would be redirected to the websphere application????
regarding the plugin if alredy installed it and i have performed the snoopServlets test comming with the IBM http server documention , it seems to be working fine, it means that both servers communicate well. so what the convenience of generation plugin functionality which is on the sever page on the websphere admin console????, do I need to that also???
any kind of help would be appriciated , as you see I'm new with IBM servers.

HI everybody,
I need to put images and html pages on IBM http server, I've created for that a web static application that I've deployed on the http server. I have also a dynamic web appliocation running on websphere 6 where I've puted all my jsp and servlets. I've instaled the IBM http plugin and both servers seems to be communicating correctly.
my first question is: what is the best practices to access the images located on the webserver from my jsp files, I dont like the idea to use the full url:http://webserverIPAdress:port/staticContext/imagesFolder, is there a way to map the images folder path in my websphere application, or to tell the jsp page to go to the http server to lokup the image?????
The second questions , do I need to do somethig to manage the redirection of the users requests: I'm planing to make my webserver as the front facade, I mean if a user asks for html page he will get it from the http webserver, but if he is requestiong a servlet how the request would be redirected to the websphere application????
regarding the plugin if alredy installed it and i have performed the snoopServlets test comming with the IBM http server documention , it seems to be working fine, it means that both servers communicate well. so what the convenience of generation plugin functionality which is on the sever page on the websphere admin console????, do I need to that also???
any kind of help would be appriciated , as you see I'm new with IBM servers.

Dynamic Image Location in JRC

Hi ! We are interested in using so called dynamic image location future in JRC. So far we are unsucessful, so the question is, is it supported in JRC ? We are able to get dynamic image location future working in report designer, but when our report is exported there is no image only path to it. We use Crystal Reports 11 R2, Java Reporting Component in JSP version. Mac

I have a couple of reports working with dynamic images. CR4E doesn't support this (yet?!?), but you can still do it with the JRC. The big kicker is the syntax of your URL. If you're using a static image on a server somewhere, it should work with no problem. However, if you're using a generated image, it's a little trickier. I discovered this when I was creating a report with barcode labels. The barcodes were not getting generated. I turned on debugging and found that the JRC was screwing up my url. The url was as follows http://myserver/barcode?message=12345 67890&format=datamatrix.
In the logs, the JRC said it couldn't find an image at the url
http://myserver/barcodemessage=12345+67890&format=datamatrix. It was stripping out the ? in the url, which is kind of an important character to say the least. I messed around with it and eventually found that if I just put ?? instead of ?, the image would display correctly with the JRC. Hope this helps! If not, post what version of the JRC you're using and the URL you're using for the image location.

Showing image located in km folder

Hi, i'm trying to show an image located in a km folder, i do this binding source property of an image element to an string element in the context, and then i assign the path of the iresource to the context element.
    The problem is that when try to show the image it ask for a user and id, because it open it as a external link, its is posible to put in the source a relative path (i don't know if it fix the problem) or i must open the image and asign it by code? do you know any solution ?
thanks

i think that when access to the km need an user like that:
    IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
                 //establish resource context
                 IResourceContext resourceContext = new ResourceContext(ep5User);
                 //get a resource factory
                 IResourceFactory resourceFactory = ResourceFactory.getInstance();
but when puts in the surce property of the image ui it try to open without login, if i copy a link to an image an try to open in a new window is the same.

HT201493 Why do i get a Location unavailable message when trying to search for a friend?

When looking for only 1 of my 2 friends I get a location unavailable message.
Does anyone know why? He doesn't have me blocked

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Cookies#Removing_cookies

Image location in IDML file?

I am creating an IDML file by using the properties from a MIF file. I have an Image object in MIF file. Its location is represented by using Left, Top, Height and Width. But in IDML file location representations are different. How can I include Image location in IDML file?

Have you read the specification? Try example 15!
Have you exported an sample Indesign document?
Coordinates are pasteboard (not spread) coodinates in units of points,
per section 10.3.3. You need not apply any transformation and can use
the identity, ItemTransform="1 0 0 1 0 0." But you could do othre
things if you wanted to.
Your PathPoint anchors will correspond to the 4 corners. So you'll use
Left for the X values of the upper-left and lower-left corners, top
for the Y values of hte upper-left and upper-right corners, and
sum Left+Width for the X values of the right corners and sum Top+Height
for hte Y values of the bottom corners.
This is pretty well-documented stuff. Please take the time to read the
documentation before asking for help.

Work around for deleting images located on network

This may be obvious to some, but I thought I'd post it to help others...
You may know that Aperture refuses to delete images located on network shares. As far as I can tell this is due to the lack of a Trash on network volumes (being a safety feature in that your images are only REALLY gone once you empty the trash...)
Work around:
1. On a LOCAL disk, create a folder called "Delete_Me" (or similar
2. Select the image(s) you want to delete and choose File > Relocate Masters and choose your "Delete_Me" folder as the destination and click the "Relocate Masters" button.
3. Now with your selection still active, you can hit cmd + back-space, and the images will go to the trash.
Apple: A preference box something like: "Delete network files immediately" or even a hook that would check when you do the delete if the file is on a network share and then automatically do the copy and delete would fix this...
Mac OS X (10.4.8)

Many thanks, this has been an issue with my Solaris 10 file server.

Dynamic Image Location?

Hi Experts
How can I use Dynamic Image location in my Crystal Reports?
Thnaks in advance
AG

Techy Guy,
In the properties of your image, you can set the location as a formula. Here, you can set the path by IF-ELSE statements:
IF {letter.city} IN ["Arnemuiden","Kleverskerke","Middelburg","Middleburg","Nieuw- en Sint Joosland","Sint Laurens"]
OR LowerCase({letter.city}) LIKE "*joosland"
THEN ".\Middelburg.png"
ELSE
    IF {letter.city} IN ["Oost-Souburg","Ritthem","Vlissingen"]
    THEN ".\Vlissingen.png"
    ELSE ".\Middelburg.png"
In this formula, the logo will be depending on a the city the recipient is in. If the city is not in one of these two options, Middelburg.png will be used as default (to have at least a logo in the letter).
You could even use a field to define the image name:
".\Flags\" + {Customers_.Country} + ".png"
will point to the directory 'Flags' in the same directory as your report is. Here, it will locate the .png file having the same name as the country field in the customers database (i.e. France.png).

Splash screen image location

Where is the Photoshop CS6 splash screen PNG image located on Mac OS X?

If you just want the image, why don't you search for 'adobe photoshop splash image cs6' in Google images?
If you're looking at altering it (which I'm unsure is against EULA and Copyrights), you'll need a resource editor such as 'ResKnife' with which you have to open up
/Applications/Adobe Photoshop CS3/Adobe Photoshop CS3.app/Contents/Resources/Adobe Photoshop CS6.rsrc
Look for 'SplashBackground', select it and export it as .png on your system.
DISCLAIMER: Misuse of .rsrc file will cause your PS to crash/ not open. I'm really not sure if editing the SplashScreen is legal. I take no responsibility for any loss/ damage to your system that may result in doing this! Do it at your own risk (technical & legal)!

How to Retrieve all Azure Images located to "East Asia"

I'm using Azure Powershell to retrieve all Windows Azure VM Images, can I filter it to show only available images located in "East Asia"?

Hi,
Please have a look at below article.
#http://michaelcollier.wordpress.com/2013/07/30/the-case-of-the-latest-windows-azure-vm-image/
Here is a snippet.
modify the script to include logic to select images that are only available in the desired data center location.
$images = Get-AzureVMImage `
| where { $_.ImageFamily -eq "Windows Server 2012 Datacenter" } `
| where { $_.Location.Split(";") -contains "West US"} `
| Sort-Object -Descending -Property PublishedDate
Using the above snippet, only the most recent version of the “Windows Server 2012 Datacenter” image that is supported in the “West US” datacenter will be returned.
Hope this helps.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I cant find the copy image location pull down menu ???

I am trying to learn how to insert a photo in a blog. The instructions say if using firefox select copy image location. I can not find it on the pull down menu's ????

You can also see the locations of all images on the current open page in Tools > Page Info > Media

Are there any performance concerns when referencing an image located in a c

Are there any performance concerns when referencing an image located in a central location (example application server)?

Hi
Should not be an issue at all - we are only going to be limited by the network bandwidth
Regards
Tim
http://blogs.oracle.com/xmlpublisher

Image Location - Unavailable

Similar Messages

Maybe you are looking for