Image Management System

Is it possible to employ photoshop album starter edition as an image management system for our College staff? The system would require to be searchable over out Intranet and contain many images.

It depends exactly what you want to be able to do. I doubt very much whether you could really get the functionality you'd need, as it's not was PSA SE 3 was designed for.
The paid-for versions have slightly more flexibility, but they are not designed to be multi-user. There are other products designed for such purposes, but they tend to be a little costly.

Similar Messages

Remote system image management

This is more of an image management than a package management question but the appropriate forum was read-only.
I'm looking into possibly using zen for managing software on an embedded system, but I have some requirements that I would like to know if zen is capable of handling.
The target system is a dual boot linux box. There are 2 bootable partitions, each with a different software version. I need to be able to upload and install a linux boot image to the non-active partition and update grub to allow access to the newly unpacked image. The user can then reboot into the other partition to activate the new software. If there's a problem they can reboot back into the previous version.
We've done this with home grown tools before but there is a desire for better integration with enterprise level management tools.
I'm not set on handling this exactly as described, so if Zen can manage something similar I would be interested in knowing how and would consider adapting our procedure to work with Zen.
Please cc any responses to bruce.edge<at>gmail.com
Thanks
-Bruce

bruceedge,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Trying to Create a Catalog file using WSIM (Windows System Image Manager)

I have been looking online for a solution to htis problem for days and come up with nothing so any help would be amazingly helpful.
I have created a Windows 8.1 image which I would like to role out to all users within my company but when trying to create a catalog file I am getting an erorr message saying "Windows SIM was unable to generate a catalog." It says "Mounting
Windows Image file......This might take a few minutes" and then fails after 6-7mins.
When opening the log file I get this:
10:00 : Cannot obtain read/write access for F:\sources\install.wim.
In order to generate a catalog file, you must have read/write access to the Windows image file and its containing folder.
10:13 :
10:13 : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows OPK or Windows AIK User's Guide.
10:13 :
10:13 : System.InvalidOperationException: The operation failed to complete. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentNullException: String reference not set to
an instance of a String.
Parameter name: source
   at System.Globalization.CompareInfo.IsPrefix(String source, String prefix, CompareOptions options)
   at ?A0xfe36268f.ConvertToNtPath(String path)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.CbsSessionAdaptor..ctor(String bootDrive, String imageWinDir, String servicingPath)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl.InitializePackages()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl..ctor(OfflineImageInfo imageInfo)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType)
   at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.Cpi.PlatformImplementation.CreateOfflineImageInstance(OfflineImageInfo imageInfo)
   --- End of inner exception stack trace ---
The one image that did work (LiteTouchPE_x64.wim) was from the OS I imported to Microsoft Workbench but the components are different to any that I have seen online when looking on how to do this.
I have made sure that the architecture is x64 and tried from ISO files I have on the system already but get the same error.
This is the first project I have been involved in and only ever done IT support before this.
Thanks for your help in advance.

Yes I am trying to capture a reference image that I have created on another machine and then reploy this through MDT. I am trying to open the Unattend.xml file because the "Capture and Sysprep" fails on the reference machine when trying to run
Sysprep. When I try to open the Unattend.xml file in MDT I get the error below:
Performing operation "generate" on Target "Catalog".
Starting: "C:\Program Files\Microsoft Deployment Toolkit\Bin\Microsoft.BDD.Catalog35.exe" "D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim" 1 > "C:\Users\*****\AppData\Local\Temp\3\Microsoft.BDD.Catalog.log"
2>&1
No existing catalog file found.
PROGRESS: 0: Starting.
PROGRESS: 0: Creating mount folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_Windows 8.1 Enterprise_njegg3ph.con.
PROGRESS: 5: Creating temp folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_temp_qj0x3ga5.obv.
PROGRESS: 10: Mounting Windows image: D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim. This might take a few minutes.
ERROR: Unable to generate catalog on D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim: System.ComponentModel.Win32Exception: The process cannot access the file because it is being used by another process
   at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PreCreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
   at Microsoft.BDD.Catalog.Program.DoCatalog()
Non-zero return code from catalog utility, rc = 2002

System Image Manager

Where can I download the Windows System Image Manager?
I want to setup a preinstallion image and I need to generate an answer file but I need the SIM.

WSIM is part of the Windows Automated Installation Kit (WAIK). Download it here: http://www.microsoft.com/downloads/details.aspx?FamilyID=c7d4bc6d-15f3-4284-9123-679830d629f2&DisplayLang=en

Windows System Image Manager doesn't see any ISO image

I am training for the 70-680 and am trying to create an answer file in Windows System Image Manager. When I click "File" and try to select an ISO image, none of my ISO files appear although I can see the rest of the files in the share.
What am I missing?
I need a vacation.

You can see in the GUI for WSIM that you can only open .clg (catalog) or .wim (windows image) when opening a Windows image.

Windows System Image Manager (WSIM) fails to catalog

WSIM (version 6.3.9600.16384) from Windows 8.1 AIK does not work with Windows 10 Preview Enterprise. It fails to generate a catalog file for the Windows 10 .wim image.
Error message shown below
Log file
1:39 PM : This application requires version 6.3.9600.16384 of the Windows ADK.
Install this version to correct the problem
1:44 PM :
1:44 PM : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows ADK User's Guide.
1:44 PM :
1:44 PM : System.ComponentModel.Win32Exception (0x80004005): Unknown error (0xc1420117)
Server stack trace:
   at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PostCreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.CatalogCreatorImpl.CreateCatalog(OfflineImageInfo offlineImageInfo)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.ICatalogCreator.CreateCatalog(OfflineImageInfo offlineImageInfo)
   at Microsoft.ComponentStudio.CatalogGenerator.CreateCat(ProgressDialog pd, Object o)
WSIM Version
Surprising that it fails on the cleaning up portion, after mounting, serializing and un-mounting the Image.
Is there an updated version of AIK or WSIM that needs to be used?

It uses a new image format. The DISM and imaging api from even version 6.3.x (win 8.1) won't be able to access it.
But I think it's got some issues. I can do a get-windowsimage -ImagePath install.wim and see the images, but dism /image:install.wim /? says "Unable to access the image. Same with the boot wim.
Here's what dism.log says that is relevant:
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Loading Provider from location C:\Windows\System32\Dism\FfuProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Connecting to the provider located at C:\Windows\System32\Dism\FfuProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-10-09 13:25:29, Error                 DISM   FolderManager: PID=1724 base\ntsetup\opktools\dism\providers\folderprovider\dll\folderimage.h:190 - CFolderImage::CreateFolderImage(hr:0x80070032)
2014-10-09 13:25:29, Info                  DISM   DISM WIM Provider: PID=1724 TID=3028 [c:\temp\boot.wim] does not exist and is not a WIM mount point. - CWimMountedImageInfo::Initialize
2014-10-09 13:25:29, Info                  DISM   DISM VHD Provider: PID=1724 TID=3028 [c:\temp\boot.wim] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Getting Provider VHDManager - CDISMProviderStore::GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM VHD Provider: PID=1724 TID=3028 [c:\temp\boot.wim] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
2014-10-09 13:25:29, Info                  DISM   DISM Imaging Provider: PID=1724 TID=3028 The provider VHDManager does not support CreateDismImage on c:\temp\boot.wim
- CGenericImagingManager::CreateDismImage
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Getting Provider WimManager - CDISMProviderStore::GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM WIM Provider: PID=1724 TID=3028 [c:\temp\boot.wim] does not exist and is not a WIM mount point. - CWimMountedImageInfo::Initialize
2014-10-09 13:25:29, Info                  DISM   DISM Imaging Provider: PID=1724 TID=3028 The provider WimManager does not support CreateDismImage on c:\temp\boot.wim
- CGenericImagingManager::CreateDismImage
2014-10-09 13:25:29, Info                  DISM   DISM Imaging Provider: PID=1724 TID=3028 No imaging provider supported CreateDismImage for this path - CGenericImagingManager::CreateDismImage
2014-10-09 13:25:29, Error                 DISM   DISM.EXE: Failed to access the image folder or image's windows folder.
2014-10-09 13:25:29, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.

Windows System Image Manager Error?

Hi Everyone,
I am having an issue trying to create an answer file through the WSIM. I locate the .wim I need and attempt to create the catalog file it needs first to do the task. However when I do attempt to create this catalog file I get the following error message:
There was an error generating a catalog file for the image ********* in Windows image file G:\RemoteInstall\Images\*******\*******.wim
Keep in mind the *** are just substitutes for the actual names.
If I attempt to just create a new answer file I am prompted with the message box "Editing an answer file without opening a Windows Image will result in limited functionality. Do you want to open a Windows image file now?
I choose yes then open the image and am informed -
"The catalog file for ******** cannot be opened for the following reason: Cannot fine the catalog file associated with the Window image ****. You must have a valid catalog file to continue. Do you want to create a catalog file?"
I click yes and then I get the same message as list on top. I am an admin on this box. Any thoughts or suggestions?
Thanks in advance for your input.

Hi,
First I would like to confirm if you are using the latest version of WAIK –WAIK 1.1. If not, I suggest installing WAIK 1.1 from the following site:
Automated Installation Kit (AIK) for Windows Vista SP1 and Windows Server 2008
http://www.microsoft.com/downloads/details.aspx?FamilyID=94bb6e34-d890-4932-81a5-5b50c657de08&DisplayLang=en
In addition, please make sure you are generating a catalog file for a install.wim file. You cannot generate a catalog file for a boot.wim file.
Because of the changes in the servicing stack in Windows Vista with Service Pack 1 (SP1) and Windows Server 2008, Windows System Image Manager (Windows SIM) cannot create catalog files for some Windows images of different architecture types. The following list describes the Image Manager architecture types and catalogs that can be created for each one.
x86 Windows SIM:
Can create catalogs for x86, x64, and Itanium-based Windows images.
x64 Windows SIM:
Can create catalogs only for x64 Windows images.
Itanium-based Windows SIM:
Can create catalogs only for Itanium-based Windows images.
Please confirm if what version of Windows SIM you are using. I recommend installing x86 Windows SIM.
For more information, please refer to the following thread:
Parameter count mismatch - Windows SIM failed
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3066853&SiteID=17
Hope it helps.
Tim Quan - MSFT

Downloading Windows Update Packages for inclusion with System Image Manager

Is there a tool other than WSUS or SCCM that can download all Windows 8.1 updates for use with System Image Manager? I would like to deploy the updates along with the OS, custom drivers, and custom applications.
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Hi Sean Liming ,
The main purpose is to download all the updates for specific system version image ,right ?
I haven`t heared about such an official released tool to do this .
As for the API ,I have found a tool based on this API developed by our MSDN guys to install the updates ,but I am afraid it doesn`t meet your need.
Searching, Downloading, and Installing Specific Updates
https://msdn.microsoft.com/en-us/library/windows/desktop/aa387101(v=vs.85).aspx
Get-WindowsUpdates.ps1
https://gallery.technet.microsoft.com/Get-WindowsUpdatesps1-7c82c1f4
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

What/Where is the 32-bit version of Windows System Image Manager?

I'm running into the problem described as follows in the WAIK documentation: "Windows SIM fails to create a catalog for a 32-bit Windows image from a 64-bit version of Windows SIM. To workaround this issue, use the 32-bit version of Windows SIM to
create catalogs for your Windows images."
Question: Where is the 32-bit version of Windows SIM? I can only find a single download for "The Windows® Automated Installation Kit (AIK) for Windows® 7"
Or are the 32-bit tools included in that version? If so, how do I use those instead?

Hi,
The issue should occurs when you install the WAIK on a 64bit Windows 7 machine.
You need install WAIK on a 32bit machine.
Different binary versions of Windows SIM cannot create catalog files for some Windows images of different architecture types. We recommend using the
32-bit version of Windows SIM to create catalog files because this version can create catalogs for all Windows image architecture types. The following list describes the Windows SIM architecture types and catalogs that can be created for each Windows
image architecture type.
x86 Image Manager. Can
create catalogs for x86, x64, and Itanium-based Windows images.
x64 Image Manager. Can
create catalogs only for x64 Windows images.
Itanium-based Image Manager.
Can create catalogs only for Itanium-based Windows images.
This article may helpful to you:
http://technet.microsoft.com/en-us/library/dd744249(WS.10).aspx
Hope that helps.
Regards,
Leo
Huang
Leo Huang
TechNet Community Support

How do I use copyprofile, image manager and create a wim file to Sysprep a reference Windows 8 computer.

Im trying to deploy a reference machine (configured) to other machines (exact or close image) with different hardware.
I have successfully used sysprep in out of the box, generalise, shutdown mode although i havent tried to deploy this to another device. Unfortunately it doesnt copy the profile to default.
I understand that I have to create an answer file using image manager based on that image, save it to a usb drive and attach this in the sysprep command line when sysprepping it.
My problem is I dont know how to easily capture an image of windows 8 into a wim file so that i can add this into image manager to create a answer file. Im also not sure what I have to do in image manager, is it a simple matter of creating and saving
the answer file or do i have to configure it to copy the profile specifically (theres only one account anyhow).
I also want to know if i have to attach the drivers or are all the standard drivers put into the sysprep image as standard. I would like the machine to be an exactly replica, same as doing a clone (but with the drivers for the new machine installed
so it will boot) same as doing a clone and then repair? If thats possible.
Any specific instructions on this would be helpful. I have read the microsft links but they are somewhat confusing.

I know this is a very late response but I thought I'd post for others who search.
The easiest way to create the .wim file is via WinPE, this guy's two YouTube videos explain the entire process in detail -
Windows 8 ADK Part 1: Capture an OS image - https://www.youtube.com/watch?v=XJ8zKX_8E9w
Windows 8 ADK Part 2: Windows Image Deployment - https://www.youtube.com/watch?v=HHIvoqSw_FI
Here's a quick rundown from my notes:
WINPE
Create WinPE via imaging tools command prompt
copype amd64 c:\winpe
makewinpemedia /iso "c:\winpe" "c:\winpe\winpe64.iso"
UNATTEND
Open Windows System Image Manager
Configure unattend.xml
Save unattend.xml to sysprep folder
Create script and save it to sysprep folder to launch sysprep with unattend
@echo off
cd C:\Windows\System32\sysprep
Sysprep /oob /generalize /unattend:C:\Windows\System32\sysprep\unattend.xml
SYSPREP
C:\Windows\System32\Sysprep
Run as administrator
OOBE/Generalize
Shutdown
CONFIGURATION of WINPE
Set IP - netsh int ip set address "Local Area Connection" static 192.168.1.2 255.255.255.0 192.168.1.1
Set DNS - netsh int ip set dns name = "Local Area Connection" source = static addr = 192.168.1.4 validate = no
Map Network Name - net use z:
\\WindowsADK\reflex\images password /USER:domain.local\username
DISKPART
diskpart
list disk
select disk zero
list partition
select partition 2 (OS partition #)
Assign letter=S (assigns drive letter to partition)
Exit
DISM
dism /capture-image /imagefile:z:\image.wim /capturedir:s:\ /name:"Windows 8.1 Custom"
Verify image is saved in the image share (z:)
http://www.microsoftfanboys.com

Lightroom image management - ready for professionals?

Hi
I have a client, which is doing professional gardening photography for various magazines in this topic. Her business ranges from magazine reports about individual gardens to delivering single images to different publishers as requested (for example by flower type, color etc.). The main thing is that her image portfolio isn't organized so much in individual shoots or contracts. An image can be sent to many publishers at any time. She needs to kepp track of this. She needs to know, which image has been published when and where.
Before moving to digital recently, she kept track of here jobs with cumulus, which had more database capabilities, but much less possibilities in image adjustment. Shooting only raw with a Canon 1 series camera, she choosed Lightroom as here image editing and managing tool. Beeing pleased with the friendliness of the user interface and many of its image editing and managing capabilities, she (actually we) are astonished, that even in a version 2 it is still not really possible to keep track of what happens to the images in a professional environment (despite the claim of Adobe that the product is made for professionals).
In essence the program isn't really capable of managing image data, which has a one to many relationship to the image (i.e. the instances of cases an image is sent to a customer). We experimented with virtual copies, which can carry individual metadata, collections (which cannot carry metadata) or storing the required data in the large description field. None of these possibilites were really satisfying. The most promising solution in using virtual copies, ended up in a maintenance nightmare, because it was too easy to forget, where to do which data management (at the master raw file or at the virtual copy).
Then, I learned that with Lightroom 2 there is a possibility to extend metadata, but, unfortunately with the usual limitation of not supporting one to many data (in the SDK-documentation called "spreadsheet type data"). The rest of the SDK documentation did not reveal any other helpful way of solving the problem as the SDK deals mainly with export plugin programming or web stuff, which is of no use to the client. It is rather disappointing that Lightroom's extensibility is still so limited. Where is the programming interface, that allows the development of complete new modules?
Given the slow pace, Lightroom development takes (I can expect that "breakthrough" extensions to the SDK will take even longer), I guess that my client can wait for another 3 or 5 years until anything close to true image management will come up.
So we have to look for some intermediate solutions. Whereas other software (expression media, idimager, cumulus) may have better database capabilities, they lack in raw editing completely and are often more awkward to use. Therefore, I would like to ask the community here, how they handle the tasks described above with Lightroom or with other tools? Perhaps we have overlooked a Lightroom capability?
One thing I thought of is to develop a special keyword hierarchy for contracts, but this also would not allow, all the images tracking needed.
Any ideas? I guess there aren't any plugins, which can deal with one to many data.
Kind regards
Thomas

Actually, we haven't ruled out keywords yet, in fact, at the moment it seems to be the only realistic possibility. However, I wonder if a growing keyword hierarchy can become unwieldy at the end, so I am sceptical, if this idea would deliver.
In general, I think that Lightroom should more move into the direction of beeing a platform for other vendors. The limitation to web stuff and export solutions isn't enough. I hope to see third party vendor modules, eventually one which provides more professional image management and tracking capabilites, exploring the fact that Lightroom has a database underneath it.
I would like to see a DxO raw conversion module or a lens correction module, fields where I think Lightroom and ACR are still not the best in its class (I think LightZone and DxO are the better raw processing engines).
Unfortunately, I do not see Lightroom going much into this direction. Probably this is already too late for the version 3 release, due in 2010 (?), so we need to wait until v4 (in 2012 ?) until the situation improves?
I believe many customers (especially professionals with precious time) need a fully integrated system, which can do image management and image adjustment at the same time. Lightroom is the right platform for it, if Adobe let it be.
Kind regards
Thomas

OLE2_OBJECT AND DOCUMENT MANAGEMENT SYSTEM (DMS)

Hi Experts.
I'm trying to make a excel inform like a catalog with materials and images which are in a Document Management System.
I'm using OLE2_OBJECT to make the inform in EXCEL, because I'm trying to do it with SMARTFORMS, and I cannot because I need to resize and put ok the images and with SMARTFORMS I cannot.
To see the information I have a ALV Objects with a custom container with the information to the database..., material, price, etc..., and in other container when you click in a row I show the picture which is in the DMS.
To do it, I use this method to get the URL to the image.
CALL METHOD cl_dms_thumbnail_display=>get_url
EXPORTING
i_doc = ls_doc "IMPORTING
e_url = g_graphic_url.
And after I call the method of instance of class cl_gui_picture to show the picture in the cl_gui_alv_container
CALL METHOD g_picture1->load_picture_from_url
EXPORTING
url = p_graphic_url
IMPORTING
RESULT = p_result.
In the code to excel print to insert the picture if I put this URL to my local pc, it's ok,
CALL METHOD OF picture 'INSERT'
EXPORTING
#1 = 'C:Documents and SettingsadministradorMis documentosMis imágenesprueba.bmp'.
but the URL of the g_graphics_url it's
SAPR3://SAPR3CMS/get/200/ZAFD_5F100/DC99BBC5172158F18A14005056C00008/DSR_20DEP_202_20BANDAS_20BROWN_20389_2020070719.JPG
and this URL it's nothing if I put in the internet explorer...
What can I do to do this??
If you have another idea I appreciate it.
Thanks.

Hi,
May be try this way . ( I am not 100% sure about this)
data : g_picture   type ref to cl_gui_picture.
data : g_thumbnail type ref to cl_gui_custom_container.
CALL METHOD cl_dms_thumbnail_display=>get_url
EXPORTING
i_doc = ls_doc "IMPORTING
e_url = g_graphic_url.
if not g_graphic_url is initial.
create object g_thumbnail
      exporting container_name = <Your container name>.
create object g_picture
       exporting parent = g_thumbnail.
call method g_picture->set_display_mode.
endif.
aRs

Integrated Document Management System

Hi,
We are considering Oracle IFS as part of an Integrated Document
Management system with the following functionality:
1. Document/Image Capture
2. Document Storage & Retrieval
3. Processflow/Workflow
IFS meets the requirement for the point 2 above. However, we are
looking for a Image Capture/Processing solution that will
provide scanning and OCR/ICR functionality. Are you aware of any
such solution that can easily be integrated with IFS, so that
scanned documents/images can be directly stored in IFS document
repository.
Thanx & Regards,

Hi,
We are a Kofax Partner and have used Kofax Ascent Software to
integrate with iFS. Essentially what we have done is the
following;
- We do not use the WebUI interface and have created our own
user interface with additional functionality for users.
- As part of the process we needed to scan documents into our
implementation of iFS and also provide the ability to associate
Meta Data with each image captured.
- In our opinion Kofax Ascent software is about the best on the
market for document/image capture and therefore we use this to
place the scanned images into a folder in iFS using the SMB
protocol.
- To read the images into iFS we have two method, a manual and
automatic interface.
- To manually pull the documents into iFS we created page which
requests certain information from the user and then reads the
scanned images and places them into the relevant folder in iFS
programmatically with the associated meta data. This is a Java
Bean which we have created for that purpose.
- To automatically pull the documents into iFS we created an
agent which is time based. At predefined time intervals it goes
to read the source folder and if anything is in there then it
will copy the files into the relevant folders in iFS again with
the associated meta data.
- To keep things as flexible as possible we have a property file
which provide certain generic information so that it can be
adapted to meet various client needs.
Naturally I do not want to go into the specifics of the Java
Beans that we have developed as this took a bit of time to get
right.
Hope this helps, if not give me a shout,
Regards,
Bernard Wright

Using PSE as a document management system

I used a program on my old computer with Windows Vista to file and organize scanned pdf documents. I could readily assign tags to a document, and then find the document using the tags. The tagging worked well. It was quick and intuitive.
I now have a new computer with Windows 7. I now realize that the program I used to tag documents will not run under Windows 7, and cannot be relied on to be useable in the future under Windows 15 or 20. So, I'm looking for a different system to file my electronic, scanned pdf documents that will be durable and long-lived, but not overly complicated or expensive. I'm dreading converting (probably meaning rekeying) approximately 1,500 documents filed in the old computer to a new filing system.
It occurred to me I could use Elements as a document management system. I could create a separate catalog for the filed documents, and use Elements to tag and find tagged documents. It wouldn't be as easy as the tagging system I had on my old computer, but my guess is that Adobe and Elements will be around for many years and are more likely to be functioning 5, 10 or 20 years from now. If it disappears, there is enough of a user base of Elements users that it seems likely there will be some means to convert from Elements documents to some other application using tags and captions.
Does this make sense? Has anyone else traveled this path?

Bobh123us wrote:
I used a program on my old computer with Windows Vista to file and organize scanned pdf documents. I could readily assign tags to a document, and then find the document using the tags. The tagging worked well. It was quick and intuitive.
Now can you tell us what this program was called so that we can tell you if there is an update for it to run on Windows 8.1.
PSE13 is for photos/images and it can tag them and sort them and you can do wonders with it but the learning curve is quite steep especially if you are not computer geek. If you want to try it before spending any money then I suggest download a full trial version and run it free of charge for 30 days. You can post questions here if you get stuck with it and people will try to help you with it.
The trial can be downloaded from this link:
<http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us>
Direct link is here:
<http://trials3.adobe.com/AdobeProducts/PSE/13_0_esd/win64/PhotoshopElements_13_Trial_LS25_ win64.exe>
Good luck.

Managed system Configuration : The JMX metrics of this Host / Byte Code Adapter are missing

Hi Friends
While Configuring EP system with SOLMAN 7.1 SP12 it is giving below message in self Diagnosis Phase.
1. Solman system is already having ISAGENT version 8 and 9 installed (but Managed system is having 8)
2. I have followed the automatic Process as below
==========================================
Automated Installation of the Introscope Agent via SMD
The Solution Manager provides an application that performs the setup of the Introscope
byte code agent for Java automatically. This section explains the steps to run the setup.
Before you can run the Introscope agent setup, the setup wizard for the managed system
must have been executed.
1.
2.
3.
4. Launch the Introscope Setup application: SAP Solution Manager Configuration 
Managed Systems Configuration  Step 7 Configure Automatically  Automatic
Activity “Byte Code Adapter Installation”  “Open Java URL” (only available in edit
mode). Your screen will look similar to the image below:
5. Check the Enterprise Manager Settings at the top of the screen. These are the
connection parameters that will be used by the agent to connect to the Enterprise
Manager.
6. In the pane Introscope Agent Setttings, select the system that you want to instrument
with the agent. Check “select all” and click “Retrieve Current Settings”. This will display
the current status of the agent setup.
7. To initially setup or update the agents, click Setup Introscope Agent …. This will open
the setup dialog as shown below. Select the desired agent version (by default only one
available) and choose the profile. Next, check the desired instrumentation areas, and,
in the case of AIX, review the AIX settings to match your environment (J9 or classic
mode).
8. Finally, hit Apply to perform the necessary changes in the agent configuration. Agent
config files will be adapted and the Java VM parameters will be set as required for the
managed system.
================================================================
3. Restarted SAP but error still present.
Please help to resolve the issue.
Thanks

Found the solution :
1819577 - Workload Analysis data missing for Java systems when using ISAGENT 8.2.4.0
Cause
l This issue has been identified as product defect and documented in note 1273028
Resolution
l As mentioned in note 1273028, update to ISAGENT 8.2.4 Patch 1 timestamp: 2012-06-26, please proceed as described below)
1. Enable the Maintenance Mode in the Agent Administration UI (http://solmanserver:port/smd/AgentAdmin)
2. Deploy the file to the Solution Manager JAVA stack using the Software Deployment Manager (SDM)
3. Disable the Maintenance Mode in the Agent Administration
4. Execute again the activity 'Byte Code Adapter Installation' of the step 'Configure Automatically' in the 'Managed System Configuration' for the
affected systems. This activity will deploy the new version of the
Introscope JAVA agent in the managed system servers and reconfigure the JVM parameters to use the new version of Introscope JAVA
Agent;
5. Check from Introscope Agent Admin if "IS Agent State" contains value "Running but needs restart"
6. Restart the affected managed system(s)
Finally Solution is update your SOLMAN system patch ISAGENT 8.2.4.0 from patch 0 to 1 via SDM.
Thanks
Mukesh

Image Management System

Similar Messages

Maybe you are looking for