'image not available' when viewing ebay auctions. I can view auctions if I go through Windows Explorer. Using Firefox 3.6 & Windows XP. Please assume that I know Jack and at the same time that I don't know Jack when it comes to computers

I can't see any auction photos. Please be specific in any paths that I need to take to fix, like the LOCATION of each step of the way. Thanks

Even though the "option Load Images Automatically was checked, I had to uncheck and save the choice then go back and check it again before I could see eBay images.

Similar Messages

  • Can I listen to music from my Apple TV to self - powered speakers and watch regular tv at the same time? I don't have a central receiver that splits everything, just the apple tv and the speakers.

    Trying to play music from my apple tv directly to speakers and at the same time watch tv. Now I'm not that advanced at technology so I kinda need the easiest way to do this. Now I see that the Apple tv has an optical audio output. Can I set that optical out to self powered speakers and then have regular RCA cables set out from the tv to the same speakers and watch the tv on mute, unless I want to turn it up for a moment. I want to be able to airplAy music through my apple tv but also put a game on at the same time if I have guest. I hope my question was clear enough, but that's the best that I can explain it. Oh by the way, I do not have one of those centrAl hub receiver where all the speakers are plugged into and where you can set different inputs and outputs out of it. Everything would be a direct connection.

    yes. u dont need the tv. turn it off. 
    1. direct connection (optical or stereo cables) to your amplifier
    2. use mac to play to atv, or iphone/ipod touch to remote control the atv. (wifi)
    works as a charm, Ive done this for several years..

  • Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?

    Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?
    I already provided my 3 digit CVV number but Itunes again need to confirm the code whereas on my Office Computer I am purchasing Apps on Itunes without verifying my billing information again and again except once at the time of creation of account.
    Please help me as I am charging by my Credit Card bank by US$ 1 each time when I give verification code.
    Thanks
    Talat Khatri

    Try the following steps,
    Sign into your computer and removal of credit card information. Here are the steps:
    1) Open iTunes and sign in to the iTunes Store.
    2) Select "View My Account" from the Store menu.
    3) Enter your password and click the View Account button.
    4) Click the Edit Payment Information button.
    5) Select "None" as the payment type.
    6) Click the Done button at the bottom of the page.
    Reset your account password from the following link:
    http://iforgot.apple.com
    Phase 3:
    Download a free content on to get recognized in iTunes.
    To ensure your account is functioning, try downloading a free item from the iTunes Store. To do this, navigate to the iTunes Store main page by clicking the Home icon near the upper-left corner of the window. Scroll down and click the "FREE ON iTunes" link near the bottom of the main page, then select an item to download.
    After you are able to download the free App try updating the billing information as usual.

  • Create SP that returns value and at the same time displays query result in output window

    I would like create an SP which will return the records from the table and also return value to my c# client application.
    For Example:
    Select * from employee returns all the query results in output window.
    Now I want to create an SP
    Create procedure Test
    As
    Declare @ret int,
    Select * from employee
    set @ret = Select count(*) from employee
    if @ret > 0
    return 1
    else
    return 0
    The above algo should return 1 0r 0 to c# client application and at the same time display all employees in sql query output window.
    Can u pls help in this regard.

    The above algo should return 1 0r 0 to c# client application and at the same time display all employees in sql query output window.
    Why?  and No!
    Why?  Your procedure generates a resultset of some number of rows.  You check the resultset for the presence of rows to determine if "anything is there".  You don't need a separate value to tell you this.  Note that it helps
    to post tsql that is syntactically correct.   While we're at it, if you just need to know that rows exist there is no need to count them since that does more work than required.  Simply test for existence using the appropriately-named function
    "exists".  E.g., if exists (select * from dbo.employee). 
    No!  A stored procedure does not display anything anywhere.  The application which executes the procedures is responsible for the consumption of the resultset; it chooses what to do and what to display. 
    Lastly, do not get into the lazy habit of using the asterisk in your tsql code.  That is not best practice.  Along with that, you should also get into the following best practice habits:
    schema-qualify your objects (i.e., dbo.employee)
    terminate every statement - it will eventually be required.

  • Why are not all photos taken with an iphone available on the icloud, even that i made some fotos at the same time. Some of them are afterwards available on fotostream others not

    Hi,
    why are not all photos taken with an iphone available on the icloud, even that i made some fotos at the same time?
    Some of these photos are afterwards available on fotostream others not.
    Thx
    Markus

    If they are in photos view then they are in an event unless you have a corrupted library
    How are you"merging" the photos?
    most common issue is either bad sort (view menu ==> sort events) or bad camera dates
    select one and show event to see the event
    LN

  • HT201338 adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

    I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
    Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

    I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
    Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

  • How to create a proxy that accept requestes get/post in the same time?

    Hi everybody,
    I have two questions with Service Bus 11gR1.
    I have to create a proxy in https that accept request get/post in the same time, also this proxy should be able to recognize the common name of the certificate.
    Is it possibile?
    Thanks a lot.
    Ettore

    The approach I mentioned is part of correctly configuring client cert authentication. For client cert authentication to succeed weblogic expects the user derived from the certificate by the user name mapper class to exist ( just exist , it wont check the password) in its security realm. The problem you have mentioned is common for any type of 'authentication' and not just specific to this approach.
    The user name mapper class can be configured to accept any attribute in the certificate DN as the mapped user. Since the thread starter is interested in CN, then he has to set CN as the mapping attribute.
    Edited by: atheek1 on Nov 10, 2010 1:33 AM

  • How to fix wireless apple keyboard that ceased pairing with imac at the same time the keyboard on my ipad2 disappeared right after I updated osx vs. 10.8.5 sent out by Apple

    I updated to OSX vs. 10.8.5 sent out by Apple on Oct 4,2013. My wireless
    Apple keyboard is no longer paired to my imac and at the same time I noted that the keyboard on my ipad2 no longer exists. At first I thought it was an icloud issue but am wondering if anyone else has experienced this problem.

    I downloaded 10.8.5 Supplementary and this time there was a picture of my keyboard with the suggestion that I power it on, which I did many times. Finally re-booted my imac and shut down BlueTooth on my ipad. I now have a keyboard back on the ipad and my wireless keyboard on the imac is working.

  • Nsert/Update and Add Column at the same Table and at the "same" Time

    Hello,
    I want Insert/Update and Add Column at the same Table and at the "same" Time but in different sessions.
    Example:
    At first the "insert/update" statement:
    Insert into TestTable (Testid,Value) values (1,5105);
    After that the "add" statement:
    Alter table TestTable add TestColumn number;
    - sadly now I get the message: ORA-00054: resource busy and acquire with NOWAIT specified
    "insert/update" statement:
    Insert into TestTable (Testid,Value) values (2,1135);
    After that the execute commit.
    I don't know when the first session set the commit statement so I want that the DB the "Alter Table..." statement execute if it's possible.
    If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.
    Thanks for ideas

    Well I want to walk in the rain without and umbrella and still stay dry, but it ain't gonna happen.
    You can't run a DDL statement against a table with transactions pending. Session 2 has to wait until session commits or rollbacks (or until the session is killed). That's just the way it is.
    This makes sense if you think about it. The data dictionary has to be consistent across all sessions. If session 2 was allowed to change the table structure whilst session 1 has a pending transaction then the database is in an inconsistent state. This is easier to see if you consider the reverse situation - the ALTER TABLE statement run by session 2 does a DROP COLUMN TESTID rather than adding a column: now what should happen to session 1's INSERT statement? You have retrospectively invalidated a statement that was perfectly legal when it was executed.
    If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.Fnord.
    Cheers, APC

  • Ive just got a new iPhone4 and I am trying to get the App's ie games from my iPhone3 onto the 4 and retain the same levels that I have reached on the 3, The Apps have gone onto the 4 but its making me re-start everything from level 1?

    Ive just got a new iPhone4 and I am trying to get the App's ie games from my iPhone3 onto the 4 and retain the same levels that I have reached on the 3,
    The Apps have gone onto the 4 but its making me re-start everything from level 1?
    Ive paid $$ for the games and then more $$ within the games via iTunes for in game purchases and desperatly want the games on the 4 with the levels that I have reached on the 3!
    Can anyone help!! Please!!!! My Smurfs and Animals are starving Hahahaha

    Mate, it's good to hear that you have gotten the iPhone 4 but sorry to burst your bubbles. Not all games can have the "saved" data ported over.
    Normally when you save a game in iPhone, the memory used is in the flash memory of the device. Those that can be ported over, reason is due to the data being saved over the air and when you logged in on a new device, it recognises you via the userID.
    Maybe you can try to backup your iPhone 3, and restore the file onto your iPhone 4. Not too sure if that would brick your phone though.

  • How to collect form responses in adobe formscentral and at the same time receive form responses through email

    My client wants to have the form that I created in FormsCentral to be able to collect email responses. So to do this, I downloaded the form as PDF then imported it into Acrobat. I created a button in Acrobat (this will be for the email response part). I used this script for that function:
    // This is the form return email. It's hardcoded
    // so that the form is always returned to the same address.
    // Change address on your form to match the code below
    var cToAddr = "[email protected]"
    // First, get the client CC email address
    var cCCAddr = this.getField("ClientEmail").value;
    // Now get the beneficiary email only if it is filled out
    var cBenAddr = this.getField("BennyEmail").value;
    if(cBenAddr != "")
    cCCAddr += ";" + cBenAddr;
    // Set the subject and body text for the email message
    var cSubLine = "Form X-1 returned from client"
    var cBody = "Thank you for submitting your form.\n" + "Save the filled form attachment for your own records"
    // Send the entire PDF as a file attachment on an email
    this.mailDoc({bUI: true, cTo: cToAddr, cCc: cCCAddr, cSubject: cSubLine, cMsg: cBody});
    I got it from here: http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address
    I'm still kinda not sure how it works but I'm getting the idea. Now what I'm having trouble with is, how do I make it so that the user will be required to click on the scripted button and at the same time, also click on the FormsCentral's generated submit button? Because as I see it, the user can click on the scripted button but they can just close out the form without submitting it to FormsCentral.
    Is there any way to make my idea work?
    Any help is very much appreciated!
    Thanks!

    I do not know or have time right now to look up NDP format.
    To write to NTFS from Mac, you need a driver.
    And to write to HFS from Windows also.
    I strongly recommend Paragon drivers for both.
    That way you can access anything from any platform.
    Paragon Software for Mac

  • How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?

    How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?
    I use the Open Explorer Windows to drag and drop the files, but the metadata are not copied. Thanks.

    To maintain the metadata you'll need to use one of the third party tools that does this kind of migration.  Metalogix has a product with a free trial that we have used before.  (Don't remember whether the free version maintains metadata or not).
     You can read about it here:
    http://www.metalogix.com/Products/Content-Matrix.aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi

    Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi. I have already restored.

    This entire thing is a hair over four months old, I don't think it should be acting up this much. Plus, this problem happens only once out of every 40 or 50 times I start this thing up. It's very infrequent, but it's there, and it just bothers me, I guess.
    That said, I would try reinstalling, but I wouldn't be able to tell if it'd worked unless the problem never cropped up again in a long, long time. Sadly I also don't have access to my OSX discs at the moment (I'm out of the country).

  • How to bind to a dataset and at the same time trim the text?

    Hi,
    I want to bind a listbox to a dataset, and the text value in the dataset is not always trimmed.
            Dim dsCity as dataset = GetListOfCity()
            ListBoxCity.DataSource = dsCity
            ListBoxCity.DataTextField = "CityName"
            ListBoxCity.DataValueField = "CityID"
            ListBoxCity.DataBind()
    I would like to ask if there is any handy way for me to bind to the dataset and at the same time, trim the text "CityName" when we are binding to it?
    Regards,
    Xavier

    Hi Xavier,
    Just as Uri Dimant said, we can use the Trim or Replace function in the textbox to trim leading or trailing spaces of any string. For example, we can use those functions as below:
    =Trim(Fields!FieldName.Value)
    =Replace(Fields!FieldName.Value, "  ", "")
    Besides, those two functions can also be done in the query with SQL.
    Reference:
    http://venkateswarlu.co.in/MSBI/ssrs/SSRS_Common_Functions__Text.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Is there a way I can stream video from my 2012 AirMac to the Apple TV using airplay and at the same time stream the audio to an air speaker?

    Is there a way stream video from a 2012 MacBook Air to a TV using Apple TV and at the same time steam the audio to an air speaker. Also the same question but using an ipad

    You can try one thing. Follow these steps:
    1. On your Mac, turn on AirPlay Mirroring and connect it to the Apple TV, so audio and video will stream from the Apple TV.
    2. Turn off the sound of the TV where you have connected the Apple TV.
    3. Then, make sure that you have turned on the AirPlay speakers. Then, open System Preferences > Sound > Output, and choose the external speakers, so sound will stream from these external speakers.
    This should work correctly

Maybe you are looking for