Image Not Found in Aperture

I just imported over 1,000 images into Aperture from a photo shoot. The first 680+ images imported fine. The rest appear as images in Aperture but when I try to make Adjustments I get the message "Image Not Found." I used "Show Package Contents" on the iPhoto Library and see that the first 680+ RAW files are located in the appropriate Masters folder. Apparently not all of the images were copied from the memory card; maybe I dismounted the CF card before all the processing was completed. I've tried repairing the database and the images are still not in the library. Ideally I would simply copy the missing RAW files into the Masters folder where they belong but it sounds manipulating files in the finder after using "Show Package Contents" is a bad thing to do. The missing files are located on the CF card, which I think is where the iPhoto library thinks they are located. I have since copied them to a folder on my hard disk.
My iPhoto library is located in the Pictures folder. I'm not using Referenced images but the badge image on the missing files indicates that "The referenced image’s master has not been found," a yellow triangle with a right arrow above it. Any suggestions for how to get the missing images into the iPhoto library?

The missing files are located on the CF card, which I think is where the iPhoto library thinks they are located. I have since copied them to a folder on my hard disk.
Then insert the card again, but do not import again.
Are the originals still reported as missing?
If not, select all images that are showing a problem and use the command "File > Consolidate Originals". 
When prompted, select to "Copy", not "to move". This will write the originals into the Aperture library.

Similar Messages

  • Managed image not found

    I was doing a relocate originals to get the masters out of my vault and into a backed up system.   After it was "done", there is one file that says "image not found".  However, I can find the image file.  How can I get Aperture to not see it as a managed image (that isn't in its vault) and instead to be a referenced image where I can point it to the file?
    Thanks in advance,
    Alan
    Aperture 3.4.4

    leonieDF wrote:
    The message in the vault panel can be misleading. It will also count files in the Photo Stream. Are you using Photo Stream?
    If Aperture relocated your images, you will be able to use the command "File > Show in Finder". Try that on some files in the project in question. If aperture still has the file indexed as "managed", the Show in Finder should be grayed out.
    If your files are truely managed, you will see them in the Library package. Ctrl-click the Aperture library and use the command "Show Package Contents". Open the folder "Masters" and navigate to the subfolder of the date, when you imported the project. Managed originals should be stored there.
    Regards
    Léonie
    Ah-ha! Yes, it's PhotoStream well, 155 of them are. The reast are in various sub-folders under Masters but they aren't the master files (those are definitely disk outside of the Library) and they are very small - <100k and the ones I've looked at are 720x540 whereas the originals were either 2048x1536 (iPhone 4S) or 3888x2592 (CanonEOS400D) so I don't know where they've come from The only clue is that the pixel size is the size of Std Def TV (UK PAL).
    I take it that PhotoStream images are Managed and can't be Referenced? Any idea where the others may have come from? I take it that it wouldn't be wise to go deleting them!!

  • Export/import of Project: Master Image Not Found? No Referenced Files

    I am using Snow Leopard and latest Aperture. I just exported a project from my Macbook and imported it on my iMac. All 200 images indicate that the Master Image Not Found and have the yellow triangle with the exclamation point.
    I have read about problems using Referenced files. These are not Referenced.
    What am I missing? Is this not the preferred way to move projects from machine to machine?
    Thanks for any help...
    Tom

    Tony -
    Just to close the loop. I discovered that some new RAM in the MBP was not good (it was OK, then didn't turn on - after a near heart attack, I tried taking out the new RAM and it was fixed!). It may be that the project export was corrupted by the bad RAM. I also disconnected the firewire drive, so that may also have contributed (even though the drive was not directly involved in any of the transfers).
    So I'm marking this 'Solved'.
    Thanks for your interest and help!
    Tom

  • "Image not found" message

    Whilst downloading pictures from a flash card I got a warning message saying that the device had been disconnected, and that my pictures hadn't been downloaded. I hadn't actually deliberately disconnected the card, but I had moved my computer and the connection has previously been rather sensitive to movement. The pictures I was trying to download couldn't be found on the card, and weren't in the Aperture album I was downloading to. However, when I opened the Trash they seemed to be in there. I dragged them to the relevant album. However, when I actually tried to open the images for editing, I got a message saying "Image not found". When I look at the thumbnails there is some sort of little icon in the bottom right corner, as you can see in the screenshot below. Have my images been lost? Can I get them back? I don't quite understand what has happened.

    I ran this and it turned out that the master files were still on the flash memory card, even though they hadn't shown up in the original index following my download failure.
    Hello David,
    So you got your images back ? Great!
    the difference between 'referenced' and 'managed' Library. What are these?
    Aperture has two methods to store the original master image files.
    Managed Masters, the default: Aperture stores the master image files inside the library package in a folder called "Masters". References masters are advantageous for small libraries - the masters are well protected, they are included in the vault backup, you can move your library by drag and drop.
    Referenced Masters: You chose a location for the master image files outside the library, and Aperture references the masters. It will be up to you to remember where your masters are and to ensure that they are neiter modified, moved, or deleted. Referenced Libraries are used for large libraries, if you cannot keep the whole library on the system drive. Then the thing to do is to store the masters on an external volume and only to keep the library and good quality previews on your system volume.
    You create a referenced library either on Import with the "Store Files" drop down menu in the "Aperture Library" brick by setting this to "In their current location" or to anfolder outside Aperture, or you use the "relocate masters" command from the "File" menu to move master image files somewhere else.
    Regards
    Léonie

  • Photo Booth won't open ... crash log says "image not found"

    I had a new hard drive installed on my MACBOOK. When i got it back, photo booth was not on my mac anymore.
    I got the app and put in on my mac and then when i try to open it, it doesnt do anything. THe crash log/console says:
    OS Version: 10.4.11 (Build 8S2167)
    Report Version: 4
    Command: Photo Booth
    Path: /Applications/Photo Booth.app/Contents/MacOS/Photo Booth
    Parent: WindowServer [81]
    Version: 2.0 (70)
    PID: 469
    Thread: Unknown
    Link (dyld) error:
    Library not loaded: /System/Library/Frameworks/ScriptingBridge.framework/Versions/A/ScriptingBridge
    Referenced from: /Applications/Photo Booth.app/Contents/MacOS/Photo Booth
    Reason: image not found
    And the Console log says:
    Library/Logs/CrashReporter/Photo Booth.crash.log
    dyld: Library not loaded: /System/Library/Frameworks/ScriptingBridge.framework/Versions/A/ScriptingBridge
    Referenced from: /Applications/Photo Booth.app/Contents/MacOS/Photo Booth
    Reason: image not found
    Jan 2 09:50:56 jamie-giglios-computer crashdump[470]: Photo Booth crashed
    Jan 2 09:50:56 jamie-giglios-computer crashdump[470]: crash report written to: /Users/jamiegiglio/Library/Logs/CrashReporter/Photo Booth.crash.log
    (timer):Null value
    [395] http://discussions.apple.com/resources/merge line 4046: ReferenceError: Can't find variable: tinyMCE
    Any help please?

    I got this same message from having installed Leopard (10.5)
    and then because the "great Check Point VPN" software doesn't support Leopard I reinstalled Tiger (10.4) from supplied CD's
    Yes, photo booth left on my machine was version 2.0.1
    and will NOT run under Tiger
    1) first, using Finder, locate your "photo booth" and rename it [or delete it]
    2) using Os X tiger cd 1 find the "Install Bundled software only" icon
    3) Pick "custom install", then expand the "Bundled Applications" until you see Photo Booth
    4) click ALL of them off, except leave Photo Booth flagged [when I pick it, office 2004 TEST drive turns on too, unflag that too]
    5) Press the Upgrade button [don't select easy install, as that will install EVERYTHING]
    6) Photo Booth shows in your Dock and it works

  • Idvd - image not found

    i just made a video with imovie and would like to burn it as a dvd. but my idvd is not there. i did not delete it. the icon is still there. i included the error from the problem report. i use ilife '08. please help.... sara
    Version: ??? (???)
    Build Info: iDVD-10910000~6
    Code Type: PPC (Native)
    Parent Process: launchd [1118]
    Date/Time: 2008-06-14 22:36:49.248 -0500
    OS Version: Mac OS X 10.5.3 (9D34)
    Report Version: 6
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000001, 0x000000008fe0105c
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: @executable_path/../Frameworks/DSPAsset.framework/Versions/A/DSPAsset
    Referenced from: /Applications/iDVD.app/Contents/MacOS/iDVD
    Reason: image not found

    I think we are looking at re-installing your iDVD application. But let's do a few of the basics first.
    Have you Repaired Permissions on the boot volume? (if not, do so now)
    Drag and drop the plist for iDvd to the trash ..... looks like this:
    com.apple.iDvd.plist
    RESTART your mac.
    Now try iDvd. Hopefully this helped.
    But if not, read on .....
    http://docs.info.apple.com/article.html?artnum=306290
    Remember to run apple's Software Updater.
    http://www.apple.com/support/idvd/
    Message was edited by: SDMacuser

  • Image not found

    Hi everyone,
    I got this error message by opening my Application in folder Products ins Xcode.
    Dyld Error Message:
    Library not loaded: /System/Library/Frameworks/UIKit.framework/UIKit
    Referenced from: /Users/thomasschober/Excuse Me/build/Distribution-iphonesimulator/Excuse Me.app/Excuse Me
    Reason: image not found
    the application runs without error on the iphone simulator, but i cant open it this way.
    Thanks to all

    The answer is mentioned in a few other posts, but I thought I'd repeat it here, so that it's easier to find this solution in the future.
    The problem is that the application you built for the iPhone Simulator is NOT a real application, even though it looks like one. You need to run it from within Xcode.
    I got the same problem trying to build an iPhone-Simulator application using another build process -- in this case, Boost Build. When I tried to run the program, it gave me the same nonsensical dynamic-library error. In my case, I got around the problem by building the GLPaint sample using Xcode, copying over the executable it generated with the one I generated via Boost Build, then running GLPaint (actually my program now) from within Xcode. Then it worked.

  • "Image not Found" error with Show Thumbnails

    Using Dreamweaver's ADDT "Show Thumbnail" server behavior, I get an "image not found" error. The thumbnail has been created because I can see in on the remote server. I am new at this, please help!

    >>
    And If I change the "File List Recordset" to get images subfolders related to a rename rule, {dogs_images_recordset.id_dog) I get an image displayed, but its always the same image and corresponds only to one record (the first of the display list)
    >>
    I´m now trying to understand your scenario -- so if I get it right, the file list recordset retrieves the correct image folder
    (assuming you´re passing the dynamic folder name from e.g. an URL variable "id_dog"), but just displays one image rather than looping through all images in that directory ? However, can you please post the code of the page containing the file list recordset ?
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • IDVD doesn´t open - Image not founds - immediately  quits

    One week ago, i was building a DVD with iDVD. Everything worked just fine.
    But today iDVD immediately quits when i´m trying to open it.
    I am running MAC OSX 10.6.8 and installed the iPhoto and iMovie Update yesterday.
    The error-message of iDVD says:
    Process:         iDVD [1850]
    Path:            /Applications/iDVD.app/Contents/MacOS/iDVD
    Identifier:      com.apple.iDVD
    Version:         ??? (???)
    Build Info:      iDVD-11500000~31
    Code Type:       X86 (Native)
    Parent Process:  launchd [168]
    Date/Time:       2011-07-12 15:27:53.878 +0200
    OS Version:      Mac OS X 10.6.8 (10K540)
    Report Version:  6
    Interval Since Last Report:          148640 sec
    Crashes Since Last Report:           17
    Per-App Crashes Since Last Report:   13
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @rpath/iLifeSlideshowCore.framework/Versions/A/iLifeSlideshowCore
      Referenced from: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/Frameworks/iLifeSlidesh owProducer.framework/Versions/A/iLifeSlideshowProducer
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <67866EA0-11AD-E175-066C-48E996265855> /usr/lib/dyld
    Model: MacBookPro8,1, BootROM MBP81.0047.B0E, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK5065GSXF, 465,76 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8, 7,5 GB
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x8509, 0xfa200000 / 3
    USB Device: Hub, 0x0424  (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x821a, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0246, 0xfa120000 / 4
    USB Device: Hub, 0x0424  (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd110000 / 3
    How do i solve this error?
    Tried to reinstall iPhoto/iDVD with the Application DVD of my Mac but it didn´t work :/

    Just solved it. Deleted iPhoto, iDVD completly, installed them with the Application-DVD and updated both.

  • Cannot open my excel sheet, the message saying  library not loaded, image not found therefor the icon is showing on the screenrey

    For the first time I cannot open my Excel. The report is saying:image not found, therefor the icon is showing on my desktop.
    Before my Mac open with excel sheet, now it is not there anymore. I guess it it hiding somewhere. How to find it? As you can see I am not an IT . Please try to avoid hight tech wording.
    Many thanks,
    Eva

    Hi Eva,
    Open Console in Utilities & see if there are any clues or repeating messages when trying Excel.

  • OATS - OLT : Request error : agent image not found on disk: empJAgent.exe

    Hello folks,
    When i am trying to run a OLT scenario using localhost as VU Agent, i get the following message. Although using other VUAgents the test works fine.
    "Request error : agent image not found on disk: empJAgent.exe"
    OLT Version : Oracle Load Testing 12.1.0.1.0 build 383
    Any help regarding this would be helpful.
    Regards,
    Nishant

    I eventually figured this out - it was that the portal management agent hadn't been created yet, I had to create it.

  • IDVD crash "image not found"

    I recently had a bad computer crash and had to reinstall the operating system. Amongst the issues of resetting a few things, the one of most concern is iDVD. I was right in the middle of some projects when the crash occurred. iDVD projects have a blank document icon and iDVD won't load. Here is the crash report:
    Date/Time: 2008-08-10 20:43:38.407 +1000
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    Command: iDVD
    Path: /Applications/iDVD.app/Contents/MacOS/iDVD
    Parent: WindowServer [106]
    Version: 7.0.2 (1100)
    PID: 525
    Thread: Unknown
    Link (dyld) error:
    Library not loaded: /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
    Referenced from: /Applications/iDVD.app/Contents/MacOS/iDVD
    Reason: image not found
    Model: PowerMac7,2, BootROM 5.1.5f2, 1 processors, PowerPC 970 (2.2), 1.6 GHz, 768 MB
    Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
    Memory Module: DIMM0/J11, 128 MB, DDR SDRAM, PC2700U-25330
    Memory Module: DIMM1/J12, 128 MB, DDR SDRAM, PC2700U-25330
    Memory Module: DIMM2/J13, 256 MB, DDR SDRAM, PC2700U-25330
    Memory Module: DIMM3/J14, 256 MB, DDR SDRAM, PC2700U-25330
    Modem: MicroDash, Australia, V.92, 7.0, APPLE VERSION 2.6.6
    Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    Network Service: Bluetooth, PPP (PPPSerial), Bluetooth-Modem
    Network Service: Built-in FireWire, FireWire, fw0
    PCI Card: AlchemyTV, tv-card, SLOT-3
    Serial ATA Device: ST380013AS, 74.53 GB
    Serial ATA Device: ST3500630AS, 465.76 GB
    Parallel ATA Device: PIONEER DVD-RW DVR-111D
    USB Device: iP4200, Canon, Up to 480 Mb/sec, 500 mA
    USB Device: Keyboard Hub, Apple, Inc., Up to 480 Mb/sec, 500 mA
    USB Device: Apple Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
    USB Device: Apple Keyboard, Apple, Inc, Up to 1.5 Mb/sec, 100 mA
    USB Device: TVMini2, Miglia, Up to 480 Mb/sec, 500 mA
    USB Device: Hub, Up to 12 Mb/sec, 500 mA
    USB Device: Bluetooth USB Host Controller, Up to 12 Mb/sec, 500 mA
    USB Device: USB-IR, Keyspan, Up to 1.5 Mb/sec, 500 mA
    USB Device: Studio Display, Up to 1.5 Mb/sec, 500 mA
    I hope someone can help me with this.
    Thanks.
    Mark.

    I was right in the middle of some projects when the crash occurred.
    If the crash was bad enough that you had to reinstall your OS, I can only imagine what it did to your iDVD projects.
    Somebody in the Tiger forum may be able to offer more suggestions. I'll try to have the thread moved there.

  • LR4 opens as lr2 and images not found

    LR4 opens as lr2 and images not found, can anyone help me please, I'm hopeless.
    LR4 just uploaded as upgrade.

    Thanks dj, what happens is when I click on the LR4 shortcut  LR4 window starts to open, flashes momentarily as LR4 then buggers off before fully opening my old LR2.
    I have removed the LR4 installed yesterday, and reinstalled, but same problem. Also the installation process now seems to never stop cycling. It goes through the full installion cycle, then starts/repeats again. I have followed the prompts and run through it 3 times before giving up.
    Any more clues on what I have done wrong, or now need t do please.

  • How to repair this?  Dyld Error Message:   Library not loaded: @rpath/MAAudioUnitSupport.framework/Versions/A/MAAudioUnitSupport   Referenced from: /Applications/GarageBand.app/Contents/MacOS/GarageBand   Reason: image not found

    how do i repair this?
    Dyld Error Message:
      Library not loaded: @rpath/MAAudioUnitSupport.framework/Versions/A/MAAudioUnitSupport
      Referenced from: /Applications/GarageBand.app/Contents/MacOS/GarageBand
      Reason: image not found

    I just tryed it and this what i get now,
    Thread 0:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib            0x933efb7a __sem_wait_nocancel + 10
    1   com.celemony.MelodyneEssentialRewireDevice    0x0c9211b4 GNCondition::waitForSignal() + 32
    2   com.celemony.MelodyneEssentialRewireDevice    0x0c920d4f GNMessagePort::registerMessagePortWithName(GNString*, GNData* (*)(GNMessagePort*, GNData*), int, int, GNDictionary*) + 315
    3   com.celemony.MelodyneEssentialRewireDevice    0x0c8c2dbe GNReWire2AudioDeviceHost::create() + 172
    4   com.celemony.MelodyneEssentialRewireDevice    0x0c8c0f3f RWDEFOpenDevice + 89
    5   se.propellerheads.rewire.library    0x0c84584e 0xc841000 + 18510
    6   se.propellerheads.rewire.library    0x0c8459b8 0xc841000 + 18872
    7   se.propellerheads.rewire.library    0x0c8488e0 RWPUnregisterDeviceImp + 5438
    8   se.propellerheads.rewire.library    0x0c846689 RWM2OpenDeviceImp + 57
    9   com.apple.music.apps.MAAudioEngine    0x02b1ac13 ReWireUpdateMIDIInfos() + 3427
    10  com.apple.music.apps.MAAudioEngine    0x02b02e9f MD::Init(int, bool) + 2367
    11  com.apple.music.apps.MAAudioEngine    0x02b0c852 GetCurrentCoreAudioDeviceNameFromUserDefaults(signed char) + 10514
    12  com.apple.music.apps.Logic        0x00a7d59e CSong::GetAuConfPoint(TGInstID, SAUCONF**) const + 384926
    13  com.apple.music.apps.Logic        0x00a7f5ac CSong::GetAuConfPoint(TGInstID, SAUCONF**) const + 393132
    14  com.apple.music.apps.Logic        0x00cb7530 TaskCompleted() + 366032
    15  com.apple.music.apps.Logic        0x009fe61b LgApplicationInit + 379
    16  com.apple.garageband              0x00067621 0x1000 + 419361
    17  com.apple.garageband              0x000667c2 0x1000 + 415682
    18  com.apple.Foundation              0x9b887df1 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49
    19  com.apple.CoreFoundation          0x95311903 ___CFXNotificationPost_block_invoke_1 + 275
    20  com.apple.CoreFoundation          0x952dc688 _CFXNotificationPost + 2776
    21  com.apple.Foundation              0x9b872fde -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
    22  com.apple.Foundation              0x9b888272 -[NSNotificationCenter postNotificationName:object:] + 55
    23  com.apple.AppKit                  0x98ab9df0 -[NSApplication finishLaunching] + 554
    24  com.apple.AppKit                  0x98ab97c0 -[NSApplication run] + 142
    25  com.apple.AppKit                  0x98d4aac5 NSApplicationMain + 1054
    26  com.apple.garageband              0x0019cae0 0x1000 + 1686240
    27  com.apple.garageband              0x0000311a 0x1000 + 8474

  • Applescript Studio app crashes with link error (dyld) image not found

    I've built a small Applescript studio app that works fine on the development machine but when I run it on other machines it crashes with a dyld error, specifically:
    Link (dyld) error:
    Library not loaded: /System/Library/PrivateFrameworks/ZeroLink.framework/Versions/A/ZeroLink
    Referenced from: /Volumes/Discover Your Mac Spotlight movie/Table of Contents Viewer.app/Contents/MacOS/Table of Contents Viewer
    Reason: image not found
    Does any one know why this happens and how I can fix it?
    Thanks very much in advance...
    iMac G5 20   Mac OS X (10.4.2)  

    Rick,
    looks like you built the application in "Development" mode - switch the build style to "Deployment" and most probably things will be fine in the other machine.
    Andreas

Maybe you are looking for