"Image not found" message

Whilst downloading pictures from a flash card I got a warning message saying that the device had been disconnected, and that my pictures hadn't been downloaded. I hadn't actually deliberately disconnected the card, but I had moved my computer and the connection has previously been rather sensitive to movement. The pictures I was trying to download couldn't be found on the card, and weren't in the Aperture album I was downloading to. However, when I opened the Trash they seemed to be in there. I dragged them to the relevant album. However, when I actually tried to open the images for editing, I got a message saying "Image not found". When I look at the thumbnails there is some sort of little icon in the bottom right corner, as you can see in the screenshot below. Have my images been lost? Can I get them back? I don't quite understand what has happened.

I ran this and it turned out that the master files were still on the flash memory card, even though they hadn't shown up in the original index following my download failure.
Hello David,
So you got your images back ? Great!
the difference between 'referenced' and 'managed' Library. What are these?
Aperture has two methods to store the original master image files.
Managed Masters, the default: Aperture stores the master image files inside the library package in a folder called "Masters". References masters are advantageous for small libraries - the masters are well protected, they are included in the vault backup, you can move your library by drag and drop.
Referenced Masters: You chose a location for the master image files outside the library, and Aperture references the masters. It will be up to you to remember where your masters are and to ensure that they are neiter modified, moved, or deleted. Referenced Libraries are used for large libraries, if you cannot keep the whole library on the system drive. Then the thing to do is to store the masters on an external volume and only to keep the library and good quality previews on your system volume.
You create a referenced library either on Import with the "Store Files" drop down menu in the "Aperture Library" brick by setting this to "In their current location" or to anfolder outside Aperture, or you use the "relocate masters" command from the "File" menu to move master image files somewhere else.
Regards
Léonie

Similar Messages

Cannot open my excel sheet, the message saying library not loaded, image not found therefor the icon is showing on the screenrey

For the first time I cannot open my Excel. The report is saying:image not found, therefor the icon is showing on my desktop.
Before my Mac open with excel sheet, now it is not there anymore. I guess it it hiding somewhere. How to find it? As you can see I am not an IT . Please try to avoid hight tech wording.
Many thanks,
Eva

Hi Eva,
Open Console in Utilities & see if there are any clues or repeating messages when trying Excel.

How to repair this? Dyld Error Message:   Library not loaded: @rpath/MAAudioUnitSupport.framework/Versions/A/MAAudioUnitSupport   Referenced from: /Applications/GarageBand.app/Contents/MacOS/GarageBand   Reason: image not found

how do i repair this?
Dyld Error Message:
Library not loaded: @rpath/MAAudioUnitSupport.framework/Versions/A/MAAudioUnitSupport
Referenced from: /Applications/GarageBand.app/Contents/MacOS/GarageBand
Reason: image not found

I just tryed it and this what i get now,
Thread 0:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib            0x933efb7a __sem_wait_nocancel + 10
1   com.celemony.MelodyneEssentialRewireDevice    0x0c9211b4 GNCondition::waitForSignal() + 32
2   com.celemony.MelodyneEssentialRewireDevice    0x0c920d4f GNMessagePort::registerMessagePortWithName(GNString*, GNData* (*)(GNMessagePort*, GNData*), int, int, GNDictionary*) + 315
3   com.celemony.MelodyneEssentialRewireDevice    0x0c8c2dbe GNReWire2AudioDeviceHost::create() + 172
4   com.celemony.MelodyneEssentialRewireDevice    0x0c8c0f3f RWDEFOpenDevice + 89
5   se.propellerheads.rewire.library    0x0c84584e 0xc841000 + 18510
6   se.propellerheads.rewire.library    0x0c8459b8 0xc841000 + 18872
7   se.propellerheads.rewire.library    0x0c8488e0 RWPUnregisterDeviceImp + 5438
8   se.propellerheads.rewire.library    0x0c846689 RWM2OpenDeviceImp + 57
9   com.apple.music.apps.MAAudioEngine    0x02b1ac13 ReWireUpdateMIDIInfos() + 3427
10 com.apple.music.apps.MAAudioEngine    0x02b02e9f MD::Init(int, bool) + 2367
11 com.apple.music.apps.MAAudioEngine    0x02b0c852 GetCurrentCoreAudioDeviceNameFromUserDefaults(signed char) + 10514
12 com.apple.music.apps.Logic        0x00a7d59e CSong::GetAuConfPoint(TGInstID, SAUCONF**) const + 384926
13 com.apple.music.apps.Logic        0x00a7f5ac CSong::GetAuConfPoint(TGInstID, SAUCONF**) const + 393132
14 com.apple.music.apps.Logic        0x00cb7530 TaskCompleted() + 366032
15 com.apple.music.apps.Logic        0x009fe61b LgApplicationInit + 379
16 com.apple.garageband              0x00067621 0x1000 + 419361
17 com.apple.garageband              0x000667c2 0x1000 + 415682
18 com.apple.Foundation              0x9b887df1 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49
19 com.apple.CoreFoundation          0x95311903 ___CFXNotificationPost_block_invoke_1 + 275
20 com.apple.CoreFoundation          0x952dc688 _CFXNotificationPost + 2776
21 com.apple.Foundation              0x9b872fde -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
22 com.apple.Foundation              0x9b888272 -[NSNotificationCenter postNotificationName:object:] + 55
23 com.apple.AppKit                  0x98ab9df0 -[NSApplication finishLaunching] + 554
24 com.apple.AppKit                  0x98ab97c0 -[NSApplication run] + 142
25 com.apple.AppKit                  0x98d4aac5 NSApplicationMain + 1054
26 com.apple.garageband              0x0019cae0 0x1000 + 1686240
27 com.apple.garageband              0x0000311a 0x1000 + 8474

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

hello,
And thank you in advance.
I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP. I've ordered the Windows 8.1 backup media.
Any way to proceed?
Thanks Tim

download the win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
then start over. install on to your usb along with the support software.

Photo Booth won't open ... crash log says "image not found"

I had a new hard drive installed on my MACBOOK. When i got it back, photo booth was not on my mac anymore.
I got the app and put in on my mac and then when i try to open it, it doesnt do anything. THe crash log/console says:
OS Version: 10.4.11 (Build 8S2167)
Report Version: 4
Command: Photo Booth
Path: /Applications/Photo Booth.app/Contents/MacOS/Photo Booth
Parent: WindowServer [81]
Version: 2.0 (70)
PID: 469
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/Frameworks/ScriptingBridge.framework/Versions/A/ScriptingBridge
Referenced from: /Applications/Photo Booth.app/Contents/MacOS/Photo Booth
Reason: image not found
And the Console log says:
Library/Logs/CrashReporter/Photo Booth.crash.log
dyld: Library not loaded: /System/Library/Frameworks/ScriptingBridge.framework/Versions/A/ScriptingBridge
Referenced from: /Applications/Photo Booth.app/Contents/MacOS/Photo Booth
Reason: image not found
Jan 2 09:50:56 jamie-giglios-computer crashdump[470]: Photo Booth crashed
Jan 2 09:50:56 jamie-giglios-computer crashdump[470]: crash report written to: /Users/jamiegiglio/Library/Logs/CrashReporter/Photo Booth.crash.log
(timer):Null value
[395] http://discussions.apple.com/resources/merge line 4046: ReferenceError: Can't find variable: tinyMCE
Any help please?

I got this same message from having installed Leopard (10.5)
and then because the "great Check Point VPN" software doesn't support Leopard I reinstalled Tiger (10.4) from supplied CD's
Yes, photo booth left on my machine was version 2.0.1
and will NOT run under Tiger
1) first, using Finder, locate your "photo booth" and rename it [or delete it]
2) using Os X tiger cd 1 find the "Install Bundled software only" icon
3) Pick "custom install", then expand the "Bundled Applications" until you see Photo Booth
4) click ALL of them off, except leave Photo Booth flagged [when I pick it, office 2004 TEST drive turns on too, unflag that too]
5) Press the Upgrade button [don't select easy install, as that will install EVERYTHING]
6) Photo Booth shows in your Dock and it works

Image Not Found in Aperture

I just imported over 1,000 images into Aperture from a photo shoot. The first 680+ images imported fine. The rest appear as images in Aperture but when I try to make Adjustments I get the message "Image Not Found." I used "Show Package Contents" on the iPhoto Library and see that the first 680+ RAW files are located in the appropriate Masters folder. Apparently not all of the images were copied from the memory card; maybe I dismounted the CF card before all the processing was completed. I've tried repairing the database and the images are still not in the library. Ideally I would simply copy the missing RAW files into the Masters folder where they belong but it sounds manipulating files in the finder after using "Show Package Contents" is a bad thing to do. The missing files are located on the CF card, which I think is where the iPhoto library thinks they are located. I have since copied them to a folder on my hard disk.
My iPhoto library is located in the Pictures folder. I'm not using Referenced images but the badge image on the missing files indicates that "The referenced image’s master has not been found," a yellow triangle with a right arrow above it. Any suggestions for how to get the missing images into the iPhoto library?

The missing files are located on the CF card, which I think is where the iPhoto library thinks they are located. I have since copied them to a folder on my hard disk.
Then insert the card again, but do not import again.
Are the originals still reported as missing?
If not, select all images that are showing a problem and use the command "File > Consolidate Originals".
When prompted, select to "Copy", not "to move". This will write the originals into the Aperture library.

Idvd - image not found

i just made a video with imovie and would like to burn it as a dvd. but my idvd is not there. i did not delete it. the icon is still there. i included the error from the problem report. i use ilife '08. please help.... sara
Version: ??? (???)
Build Info: iDVD-10910000~6
Code Type: PPC (Native)
Parent Process: launchd [1118]
Date/Time: 2008-06-14 22:36:49.248 -0500
OS Version: Mac OS X 10.5.3 (9D34)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/DSPAsset.framework/Versions/A/DSPAsset
Referenced from: /Applications/iDVD.app/Contents/MacOS/iDVD
Reason: image not found

I think we are looking at re-installing your iDVD application. But let's do a few of the basics first.
Have you Repaired Permissions on the boot volume? (if not, do so now)
Drag and drop the plist for iDvd to the trash ..... looks like this:
com.apple.iDvd.plist
RESTART your mac.
Now try iDvd. Hopefully this helped.
But if not, read on .....
http://docs.info.apple.com/article.html?artnum=306290
Remember to run apple's Software Updater.
http://www.apple.com/support/idvd/
Message was edited by: SDMacuser

Problem Installing Oracle Linux 6.3 - 'Disc not found message box'

I'm trying to install Oracle linux on a old laptop. Single disk drive.
I downloaded V33412-01Oracle Linux Release 6 Update 3 Boot iso image for x86_64 (64 bit)
burned it as an ISO image on a CD.
Inserted the CD,started the system, cd booted and the installation started.
Skipped the verify media (I verifed it during another installation try)
selected English
selected US
When prompted for installation method, I tried selecting 'LOCAL CD/DVD' since that's where my CD is at. I get a 'Disc not found message box'.
I've also tried to select the /dev/sda1, which the installation accepted, only to fail later saying it can't find the ISO image.
I also tried putting the ISO image and unzipping the contents of the file onto a USB stick and selcting this during the install - same error.
I tried putting V33413-01 onto the USB stick and selcting that - its too big to burn on a CD, that didn't work..
Any ideas here? Though this was a easy installation but I'm scratching my head as to how to continue?

Not very clearly - for me at least.
Not sure - and not sure where to find instructions on how to do this.
It mentions that you don't need the source CDs
Oracle Linux Release 6 Update 3 source DVD 1 V33413-01 3.1G
Oracle Linux Release 6 Update 3 source DVD 2 V33414-01 1.7G
Not sure what to do with these anyway.
Installation
To install Oracle Linux 6.3 from DVD media, follow the following steps:
1. Download the compressed binary DVD images
Download Oracle Linux 6.3 DVD from the Oracle Software Delivery Cloud.
You do not need to download source DVDs to install Oracle Linux.
2. Verify the downloaded media
Verify the downloaded file by comparing its sha1sum or md5sum with the published
sha1sum or md5sum.
3. Write the DVD image to DVD
Use your favorite cd burning software to write these images directly to DVD.
You should not simply copy the files onto the DVD. You must use a DVD burner
that can accept an ISO image as input, and which can create a bootable DVD
from it. To test if you have burned the images correctly, insert a burned
DVD and ensure that multiple files and directories are visible.
6. Insert the DVD, and boot
Insert the DVD into your system, boot from DVD, and follow the on-screen instructions
to deploy Oracle Linux!

Managed image not found

I was doing a relocate originals to get the masters out of my vault and into a backed up system. After it was "done", there is one file that says "image not found". However, I can find the image file. How can I get Aperture to not see it as a managed image (that isn't in its vault) and instead to be a referenced image where I can point it to the file?
Thanks in advance,
Alan
Aperture 3.4.4

leonieDF wrote:
The message in the vault panel can be misleading. It will also count files in the Photo Stream. Are you using Photo Stream?
If Aperture relocated your images, you will be able to use the command "File > Show in Finder". Try that on some files in the project in question. If aperture still has the file indexed as "managed", the Show in Finder should be grayed out.
If your files are truely managed, you will see them in the Library package. Ctrl-click the Aperture library and use the command "Show Package Contents". Open the folder "Masters" and navigate to the subfolder of the date, when you imported the project. Managed originals should be stored there.
Regards
Léonie
Ah-ha! Yes, it's PhotoStream well, 155 of them are. The reast are in various sub-folders under Masters but they aren't the master files (those are definitely disk outside of the Library) and they are very small - <100k and the ones I've looked at are 720x540 whereas the originals were either 2048x1536 (iPhone 4S) or 3888x2592 (CanonEOS400D) so I don't know where they've come from The only clue is that the pixel size is the size of Std Def TV (UK PAL).
I take it that PhotoStream images are Managed and can't be Referenced? Any idea where the others may have come from? I take it that it wouldn't be wise to go deleting them!!

Image not found

Hi everyone,
I got this error message by opening my Application in folder Products ins Xcode.
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/UIKit.framework/UIKit
Referenced from: /Users/thomasschober/Excuse Me/build/Distribution-iphonesimulator/Excuse Me.app/Excuse Me
Reason: image not found
the application runs without error on the iphone simulator, but i cant open it this way.
Thanks to all

The answer is mentioned in a few other posts, but I thought I'd repeat it here, so that it's easier to find this solution in the future.
The problem is that the application you built for the iPhone Simulator is NOT a real application, even though it looks like one. You need to run it from within Xcode.
I got the same problem trying to build an iPhone-Simulator application using another build process -- in this case, Boost Build. When I tried to run the program, it gave me the same nonsensical dynamic-library error. In my case, I got around the problem by building the GLPaint sample using Xcode, copying over the executable it generated with the one I generated via Boost Build, then running GLPaint (actually my program now) from within Xcode. Then it worked.

IDVD doesn´t open - Image not founds - immediately quits

One week ago, i was building a DVD with iDVD. Everything worked just fine.
But today iDVD immediately quits when i´m trying to open it.
I am running MAC OSX 10.6.8 and installed the iPhoto and iMovie Update yesterday.
The error-message of iDVD says:
Process:         iDVD [1850]
Path:            /Applications/iDVD.app/Contents/MacOS/iDVD
Identifier:      com.apple.iDVD
Version:         ??? (???)
Build Info:      iDVD-11500000~31
Code Type:       X86 (Native)
Parent Process: launchd [168]
Date/Time:       2011-07-12 15:27:53.878 +0200
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          148640 sec
Crashes Since Last Report:           17
Per-App Crashes Since Last Report:   13
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @rpath/iLifeSlideshowCore.framework/Versions/A/iLifeSlideshowCore
Referenced from: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/Frameworks/iLifeSlidesh owProducer.framework/Versions/A/iLifeSlideshowProducer
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???) <67866EA0-11AD-E175-066C-48E996265855> /usr/lib/dyld
Model: MacBookPro8,1, BootROM MBP81.0047.B0E, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5065GSXF, 465,76 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8, 7,5 GB
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0246, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3
How do i solve this error?
Tried to reinstall iPhoto/iDVD with the Application DVD of my Mac but it didn´t work :/

Just solved it. Deleted iPhoto, iDVD completly, installed them with the Application-DVD and updated both.

OATS - OLT : Request error : agent image not found on disk: empJAgent.exe

Hello folks,
When i am trying to run a OLT scenario using localhost as VU Agent, i get the following message. Although using other VUAgents the test works fine.
"Request error : agent image not found on disk: empJAgent.exe"
OLT Version : Oracle Load Testing 12.1.0.1.0 build 383
Any help regarding this would be helpful.
Regards,
Nishant

I eventually figured this out - it was that the portal management agent hadn't been created yet, I had to create it.

Not able to view the Spaces home page; getting Page not found message

Hello All,
I seem to have a problem trying to access the Spaces Welcome page. I get a page not found message trying to access.
When I look into the logs -
[2010-07-08T08:32:32.137-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Factory Finder is already initialized, hence quitting
[2010-07-08T08:32:32.152-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Cannot locate the document 'oracle/webcenter/webcenterapp/extendingspaces/extending-spaces-properties.xml'.
[2010-07-08T08:32:32.347-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.spaces.search] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] MDS_QUERY: List size: 0, forAdmin true, isTemplate true, rowsRestricted false, Time Taken : 192
[2010-07-08T08:32:32.376-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Found the scope spacetemplate/Basic is viewable to authenticated role, setting the flag to true and returning.
[2010-07-08T08:32:32.402-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Found the scope spacetemplate/CommunityOfInterest is viewable to authenticated role, setting the flag to true and returning.
[2010-07-08T08:32:32.430-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Found the scope spacetemplate/ProjectSpace is viewable to authenticated role, setting the flag to true and returning.
[2010-07-08T08:32:32.431-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.spaces] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Templates Application Regions initalized Sucessfully. Templates list has 3 Published Templates list has 3Initalization took 277 ms
[2010-07-08T08:32:32.550-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.page] Relationship Service is already registered: oracle.webcenter.page, ignoring...
[2010-07-08T08:32:32.601-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.calendar.personal] Relationship Service is already registered: oracle.webcenter.collab.calendar.personal, ignoring...
[2010-07-08T08:32:32.611-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.calendar.community] Relationship Service is already registered: oracle.webcenter.collab.calendar.community, ignoring...
[2010-07-08T08:32:32.616-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.list] Relationship Service is already registered: oracle.webcenter.list, ignoring...
[2010-07-08T08:32:32.618-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.list.data] Relationship Service is already registered: oracle.webcenter.list.data, ignoring...
[2010-07-08T08:32:32.666-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.doclib] Relationship Service is already registered: oracle.webcenter.doclib, ignoring...
[2010-07-08T08:32:32.695-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.announcement] Relationship Service is already registered: oracle.webcenter.collab.announcement, ignoring...
[2010-07-08T08:32:32.714-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.note] Relationship Service is already registered: oracle.webcenter.note, ignoring...
[2010-07-08T08:32:32.727-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.relationship.url] Relationship Service is already registered: oracle.webcenter.relationship.url, ignoring...
[2010-07-08T08:32:32.751-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.forum] Relationship Service is already registered: oracle.webcenter.collab.forum, ignoring...
[2010-07-08T08:32:32.983-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.framework.service.EclipseLinkLogger] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] 2010-07-08 08:32:32.982--ServerSession(7507840)--PersistenceUnitInfo ServiceFrameworkPUnit has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored
[2010-07-08T08:32:32.986-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.framework.service.EclipseLinkLogger] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] 2010-07-08 08:32:32.986--ServerSession(7507840)--EclipseLink, version: Eclipse Persistence Services - 1.2.0.v20091016-r5565
[2010-07-08T08:32:32.989-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.framework.service.EclipseLinkLogger] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] 2010-07-08 08:32:32.989--ServerSession(7507840)--webcenter-oracle.webcenter.framework login successful
[2010-07-08T08:32:33.618-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.adf.mbean.share.connection.ConnectionsMXBeanImpl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Registering Connection Runtime MBean
[2010-07-08T08:32:35.174-04:00] [WLS_Spaces] [WARNING] [ADF_FACES-30163] [oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] The application is running with the new window detect flag off. It is highly recommended that this flag be turned on to ensure proper functioning of your application when new browser windows are launched. In web.xml set the context parameter oracle.adf.view.rich.newWindowDetect.OPTIONS to 'on'.
[2010-07-08T08:32:38.963-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.collab.forum.internal.model.gateway.ForumGatewayManager] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] oracle.webcenter.collab.forum.ForumException: no connections available for: Discussion Forum
[2010-07-08T08:32:39.435-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.collab.forum.internal.model.gateway.ForumGatewayManager] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] oracle.webcenter.collab.forum.ForumException: no connections available for: Discussion Forum
[2010-07-08T08:32:39.951-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.collab.forum.internal.model.gateway.ForumGatewayManager] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] oracle.webcenter.collab.forum.ForumException: no connections available for: Discussion Forum
[2010-07-08T08:33:10.320-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] Spaces request : #Request URL = http://192.168.0.140:1527/webcenter/spaces #QueryString = null #Encoding = UTF-8 #lang = null
[2010-07-08T08:33:10.321-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] Spaces request : #Request URL = http://192.168.0.140:1527/webcenter/spaces #QueryString = null #Encoding = UTF-8 #lang = null
[2010-07-08T08:33:10.633-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.jbo.uicli.mom.CpxUtils$Visitor] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] jar:file:/wbc/web_logic/user_projects/domains/kbace_domain/servers/WLS_Spaces/tmp/_WL_user/oracle.webcenter.framework.view/9rmhle/WEB-INF/lib/conference-view.jar!/oracle/webcenter/collab/rtc/conference/view/DataBindings.cpx
[2010-07-08T08:33:10.926-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.adf.model.servlet.HttpBindingContext] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] Application error handler: oracle.webcenter.webcenterapp.internal.view.error.WCErrorHandlerImpl
Any help would be appreciated on this.
Thanks in advance.
Nachi

Hi All,
I am facing this peculiar issue.
Post installation of webcenter, I can access the Webcenter Spaces homepage.
I log into webcenter as admin and configure a Mail Connection. I start and stop the Webcenter Spaces deployment. Now I don't see the Webcenter spaces Home page.
Error on page -
Page Not Found...
The page you requested is not found.
Click here to go to home
Click here to go to list of accessible pages
When I check the Logs on the server; I see -
#SEARCH_CRITERIA
#     START_TIME: 2010-07-29T05:12:22.740-04:00
#     END_TIME: 2010-07-29T06:12:22.740-04:00
#     MESSAGE_TYPES:INCIDENT_ERROR, ERROR, UNKNOWN
#SELECTED_TARGETS_LIST
#     /Farm_base_domain/base_domain/WLS_Spaces/webcenter:oracle_webcenter
[2010-07-29T06:09:27.910-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [host: kbace-hpbs0201.kbace.com] [nwaddr: 127.0.0.1] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000IcTfOu8Fw000jzwkno1CK78x00003V,0] [APP: webcenter] Factory Finder is already initialized, hence quitting
[2010-07-29T06:09:27.933-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [host: kbace-hpbs0201.kbace.com] [nwaddr: 127.0.0.1] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000IcTfOu8Fw000jzwkno1CK78x00003V,0] [APP: webcenter] Cannot locate the document 'oracle/webcenter/webcenterapp/extendingspaces/extending-spaces-properties.xml'.
#MESSAGE_COUNT: 2
Any light in this regard is much appreciated.
Thanks in Advance.
Nachi

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

"Image not found" message

Similar Messages

Maybe you are looking for