Image not visible on remote site

HI,
I have a set of pages made with templates . There is a
problem however : certain images don't appear on the remote site
and are replaced by red crosses.
I send an example : when clicking on the image , a wider
version should appear but instead there's a little red cross . It
works fine on my preview browser. Do you know how to solve this ?
Thanks .
This is a link to the file, try to cclick on the image :
http://perso.wanadoo.fr/brunierbrunojulier/IllustrationsFrame-02monument1.html

You are linking to your template which you have uploaded (?):
<a href="Templates/IllustrationsFrame-02girlWaving.dwt"
class="navigation2">WavingGirl</a></td>
Jo
"bejim" <[email protected]> wrote in message
news:e389mc$1p5$[email protected]..
> HI,
> I have a set of pages made with templates . There is a
problem however :
> certain images don't appear on the remote site and are
replaced by red
> crosses.
> I send an example : when clicking on the image , a wider
version should
> appear
> but instead there's a little red cross . It works fine
on my preview
> browser.
> Do you know how to solve this ? Thanks .
> This is a link to the file, try to cclick on the image :
>
http://perso.wanadoo.fr/brunierbrunojulier/IllustrationsFrame-02monument1.html
>
>

Similar Messages

File does not exist on remote site, yet it does

I have been trying to understand how Dreamweaver handles remote files in CS5.
My server is setup as a remote server and a test server.
I open the remote file, it offers to get dependencies, so I click yes.
I click on Live view, then it tries to show me the following url
http://my_site.com/public_html/path/to/my/file/file.php
It should not put public_html in the path, and I did not specify this in my site setup. My root setting is /.
Anyway, If I change the url manually, then it shows correctly. Then it offers to discover dunamically linked files, which I agree to.
Now it tells me that 'Dynamically-related files could not be resolved because the site definition is not correct for this server'
If I try to open one of the files that it has discovered, I am told that it is not on the disk, so would I like to 'get it', so I agree.
Finally, I am told that 'Get operation failed since linked-file.php does not exist on remote site'
I suspect that this is all to do with my site definition, but I fiddled with the settings and can't resolve this. I think that the whole problem goes back to Dreamweaver's insistance on putting public_html in the path, but I can't stop it doing so.
Any suggestions?
Thanks
ian

Hi,
Well, yes I did manage to fix the dynamically linked resources issue. As mentioned above, I did need to mention public_html in my Root Directory setting in server setup (silly of me).
I had tried this at first, but it didn't work, as I had the server set as a test server and not a remote server, anyway, i now have it set as both and all is well.
Except that, the first issue that mentioned is still with me: namely, dreamweaver mentions the public_html in the url path when on live view, which is not correct and I don't know where it is inferring this from. I can change it manually, but this doesn't seem right to me. Am I still missing a setting?
In anwer to the questions:
1) My setting (now) in the Root Directory setting in DW is: /public_html/
2) My actual path on the server (that i mention in php scripts) is: /home/login_name/public_html//path/to/my/file/file.php
[In the advanced settings of DW site setup on the Local Info page I have set Links relative to Document option, although it does not seem to make a difference when I change it to Site Root.]
Any suggestions appreciated.
Thanks
Ian

I created a shared stream and selected publicwebsite, but pictures are not visible at that site. What can I do?

I created a shared stream and selected public website on my iPad air, but pictures are not visible at that site. What can I do?

it's rchrdsrw again-- previously visible photos on shared photos on website are also no longer visible.

GWTDOMAIN Service request not forwarded to remote site gwerrno(402019)

Hi
my tuxedo sometime take errors as followed:
084405.guzqz2!GWTDOMAIN.11056: LIBGW_CAT:1029: ERROR: Service request not forwarded to remote site:"TPESVCERR - server error while handling request" gwerrno*(402019)*
084521.guzqz2!GWTDOMAIN.11056: LIBGW_CAT:1029: ERROR: Service request not forwarded to remote site:"TPESVCERR - server error while handling request" gwerrno(402019)
OS: SCO Open Server506
tuxedo version: 6.5
patchlev: 455
it will come OK each time 10-20 minutes after it take such errors.
I checked the pq and IPCs . there seems to be no blocked process or queqes .
have anybody solved problem like this?
Please help. Thanks a lot
=======================================
pq
Prog Name Queue Name # Serve WkQueued # Queued Ave. Len Machine
C00000 00001.00015 1 0 0 0.0 SITE1
BBL 140000 1 0 0 0.0 SITE1
DMADM 00001.00010 1 0 0 0.0 SITE1
WSL 00001.00005 1 0 0 0.0 SITE1
GWTDOMAIN gwgrp 1 0 0 0.0 SITE1
C00000 00001.00011 1 0 0 0.0 SITE1
B31296 00003.00060 1 0 0 0.0 SITE1
GWADM 00001.00020 1 0 0 0.0 SITE1
================================
IPCS
ipcs -a
IPC status from /dev/kmem as of Thu Sep 25 09:03:30 2008
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 16141 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:32
q 27406 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:32
q 21263 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:32
q 22288 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:32
q 4881 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 11055 11054 23:11:32 23:11:32 23:11:32
q 8466 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 11054 11055 23:11:32 23:11:32 23:11:32
q 22291 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 11065 11056 9:01:36 9:01:36 23:11:32
q 13588 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 11056 11059 9:01:33 9:01:33 23:11:32
q 277 0x00000000 rw-rw-- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:32
q 24854 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 11059 11062 10:53:01 10:53:01 23:11:32
q 18711 0x00000000 rw-rw-- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:32
q 24856 0x00000000 rw-rw-- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:32
q 29465 0x00000000 rw-rw-- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:32
q 11546 0x00000000 rw-rw-- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:32
q 29467 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 11059 11063 9:01:26 9:01:26 23:11:33
q 15132 0x00000000 rw-rw-- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:33
q 15133 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 11057 11064 16:04:23 16:04:23 23:11:33
q 6942 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 11059 11065 9:01:33 9:01:33 23:11:33
q 29471 0x00000000 rw-rw-- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:33
q 11040 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:33
q 29473 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:33
q 15138 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 11059 11068 11:09:39 11:09:39 23:11:33
q 15651 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:34
q 7460 0x00000000 -Rrw-rw---- rmtsrv informix rmtsrv informix 0 0 32768 0 0 no-entry no-entry 23:11:34
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
m 0 0x000018e5 --rw-rw-rw- root sys root sys 2 23228 547 549 11:44:34 no-entry 11:44:34
m 12307 0x0002c309 rw-rw-- rmtsrv informix rmtsrv informix 23 791012 11049 11150 8:59:50 8:59:56 23:11:30
m 12308 0x00000000 rw----- rmtsrv informix rmtsrv informix 4 1568 11050 11053 23:11:32 no-entry 23:11:32
m 12309 0x00000000 rw----- rmtsrv informix rmtsrv informix 2 69967 11055 11056 23:11:32 no-entry 23:11:32
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 26009 0x0002c309 ra-ra-- rmtsrv informix rmtsrv informix 3 9:03:21 23:11:30
s 26010 0x00000000 ra-ra-- rmtsrv informix rmtsrv informix 243 no-entry 23:11:30
s 26011 0x00000000 ra-ra-- rmtsrv informix rmtsrv informix 243 no-entry 23:11:30
s 13012 0x00000000 ra-ra-- rmtsrv informix rmtsrv informix 243 no-entry 23:11:30
s 26013 0x00000000 ra-ra-- rmtsrv informix rmtsrv informix 243 no-entry 23:11:30
s 26014 0x00000000 ra-ra-- rmtsrv informix rmtsrv informix 28 7:55:00 23:11:32
Edited by: user7335851 on 2008-9-25 上午2:19

There's a similar case to that in which the solution was to upgrade the patchlev of Tuxedo software. The latest RP for Tuxedo 6.5 resolve some issues related to GWTDOMAIN process.
501. CR266129 Tuxedo 6.5 RP496: LIBGW_CAT:1029 Service request not forwarded - TPELIMIT (S-34477)
517. CR342496 Tx 6.5 [propagation] pq in tmadmin report too large number for GWTDOMAIN, not match ipcs results (S-42376)
Many things related to domains have been fixed.
I hope that solves your problem.
Regards.

SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

All:
Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
SharePoint" link is visible.
The issue has be confirmed in 5 servers across two farms
DEV, QA, and PROD on client recently updated
DEV and PROD in a completely separate client farm
I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

Hi.
We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
not defined an "AltText"/"Alternate Text" the problem seems to occur.
In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
I don't know if this may be the case for everyone else, but give it a try.
From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
Below is a copy of the working solution:
function ASO_UpdateButtonsAndPanels()
{ULSuBa:;
var hasContent=!!this.AssetData.AssetUrl;
//SharePoint 2010: ManageLinkDisplayText is always "True"
//var hasContent=!!this.AssetData.AssetUrl;
//if(this.AssetData.ManageLinkDisplayText)
//hasContent=hasContent && !!this.AssetData.AssetText;
//SharePoint 2013
//var a=!!this.AssetData.AssetUrl;
//if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
//Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
if(this.SelectorType!=ConstImageSelectorType)
if(this.AssetData.ManageLinkDisplayText)
hasContent=hasContent && !!this.AssetData.AssetText;
if( hasContent )
if (this.ClearAssetButton !=null)
this.ClearAssetButton.EnableButton();
this.GetAssetSelectedPanel().style.display="inline";
this.GetEmptyPanel().style.display="none";
else
if (this.ClearAssetButton !=null)
this.ClearAssetButton.DisableButton();
this.GetAssetSelectedPanel().style.display="none";
this.GetEmptyPanel().style.display="inline";
I hope this helps anyone else struggling with the same problem.
Thanks!
Øyvind

Images Not Visible but Loading within Spry

I've built out a site using Spry numerous times and never had
any problems. But the below site I'm having issues with in that it
works fine in Safari but the images load within the Spry region set
(div id="mainContent") but are not visible. The images are
definately there as they can be viewed in a seperate window or
downloaded to the desktop.
w/w/w/./sl/im/press/./com (ignore / for domain name)
I've tried commenting out various elements in the css and
html and nothing seems to remedy this problem. Any help would be
super appreciated as I'm super stuck on this! The images don't load
in Firefox or Explorer. Thanks!

Hi bkerkay,
first try a rebuild of the library.
Try this:
Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
Close iPhoto
Duplicate the iPhoto Library folder
Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
iPhoto 4 or later: Rebuilding the iPhoto Library
Get back with results.
Lori

Exchange 2010 Free busy not working from remote site to main site "exception message is: Could not find a base address"

Hi all , I have an exchange 2010 SP 2 environment with 2 sites , the remote site FL free busy has NEVER worked and I get this error on the remote site , is this related ?
thanks
Log Name: Application
Source: System.ServiceModel 3.0.0.0
Date: :
Event ID: 3
Task Category: WebHost
Level: Error
Keywords: Classic
User: SYSTEM
Computer: FL-CAS1.WOMBAT.LOCAL
free bust works from WITHIN the remote (FL ) site , but NEVER to the main (WASH) site , it has Never worked ,I am thing that this error is related
thanks I have no idea how to fix
Description:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/17256489
Exception: System.ServiceModel.ServiceActivationException:
The service '/EWS/exchange.asmx' cannot be activated due to an exception during compilation. The exception message is: Could not find a base address that matches scheme http for the endpoint with binding CustomBinding. Registered base address schemes
are [https].. ---> System.InvalidOperationException:
Could not find a base address that matches scheme http for the endpoint with binding
++++

Hi
This issue could be with corruption in Autodiscover and web services virtual directory
Replace Web.config file for Autodiscover and web services virtual directory from the other working site
Delete and Recreate Autodiscover and web services virtual directory
Do this only on the affected site
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Fill Image not visible with iOS (ipad/iphone)

Hi
I created a website with Adobe Muse and I have an issue when surfing with ipad or iphone.
When you have a coloured rectangle and add a fill image to it, it's perfectly visible with any type of browser on a desktop pc.
Yet, when using iOS7 the image is not shown, I only see the coloured rectangle.
This issue only concurs when I use parallax layers. The moment I add a movement to the image, it's not visible on ipad.
What I exactly do:
image fill: adapt to fill (in dutch: aanpassen aan vulling) and centered
movement: start movement up and right both on 0. after movement: up and right both on 0. This way I can create a parallax effect.
You can look at the example: http://balratmort.businesscatalyst.com
There are 4 image's not shown.
Strange thing: the first image with the brazilian flag has the same settings as the others, and the image is visible!
Could someone please help me in this?

I found the solution/error!
my main position in the movement tab was set to 0px.
So the movement starts when i'm at the top of the page.
when i reach the image it's already scrolled out of focus.
I need to set this to the pixel where my rectangle starts, not 0px.
and that's why the first image with the brazil flag, worked correctly!
I hope it's clear, since my muse is dutch, not english.

Links not changed on REMOTE site

I posted a message similar to this one, but for some reason I
can't get to my message and reply.
I created a site and upon finishing the webpages I 'put' the
files to 'remote' site.
Not a single link has changed to the remote URL.
It shows all 'local' links and naturally it don't work. I
have no idea what I missed but doing it several times and even
re-creating everything ... same results. This is such a simple
automatic thing with any cheap editor, but DW it's a MAJOR problem
and so complicated that it takes more time to upload then create
the whole site.
Please send me a message if possible, because I am not able
to see my own message at Adobe for some reason.
thanks :)

DW doesn't change links when it uploads. If the links are
broken locally,
the will be broken when you upload. Conversely, if they are
broken when you
upload, that means that they are broken locally too. To see
that they are
broken locally you will need to look at the code - an
absolute file:/// link
*will* appear to work locally, but it is still broken.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"webkruzer1" <[email protected]> wrote in
message
news:f4esj0$oq7$[email protected]..
>I posted a message similar to this one, but for some
reason I can't get to
>my
> message and reply.
>
> I created a site and upon finishing the webpages I 'put'
the files to
> 'remote'
> site.
> Not a single link has changed to the remote URL.
> It shows all 'local' links and naturally it don't work.
I have no idea
> what I
> missed but doing it several times and even re-creating
everything ... same
> results. This is such a simple automatic thing with any
cheap editor, but
> DW
> it's a MAJOR problem and so complicated that it takes
more time to upload
> then
> create the whole site.
> Please send me a message if possible, because I am not
able to see my own
> message at Adobe for some reason.
> thanks :)
>

Images not visible in Web Dynpro

Hi All,
I am trying to show pictures from KM in a Web Dynpro for Java application but I have some issues with some pictures created and modified in Macintosh.
Pictures/images created in Adobe Photoshop CS2 Macintoch are not visible.
Any idea?
Regards,
Ridouan

Hi Armin,
The format is 240 by 340 px, the size is 85kb.
The browser is displaying the images correctly and I can't open the images with MS Paint.
I am using Windows viewer to view these images.
The URL is correct as I have other images (not created in Macintoch) and Web Dynpro is displaying these images just fine. The size is here 10KB.
If I place a link to the image then it will be displayed but not with the KM code.
wdContext.currentContextElement().setImage("/irj/go/km/docs/documents/Telefoongids/" + klaccount + ".jpg");
IPublicTelGidController.IDetailsElement details = wdContext.currentDetailsElement();
          String klaccount = wdContext.currentDetailsElement().getKlaccount();
          String foto_ok = wdContext.currentDetailsElement().getFoto_Ok();
          String manager = wdContext.currentDetailsElement().getManager();
          if (foto_ok.equals("X") && manager.equals("X")){
               IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
               IUser sapUser = wdClientUser.getSAPUser();
               com.sapportals.portal.security.usermanagement.IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
               //Getting the Resource...
               IResourceContext resourseContext = new ResourceContext(ep5User);
               IResourceFactory resourseFactory = ResourceFactory.getInstance();
               String path = "/documents/Telefoongids/" + klaccount + ".jpg";
               RID pathRIDimg = RID.getRID(path);
               com.sapportals.wcm.repository.IResource resourceimg =
               resourseFactory.getResource(pathRIDimg, resourseContext);
               //Reading the image file...
               BufferedInputStream bufIn =
               new BufferedInputStream(resourceimg.getContent().getInputStream());
               byte[] imagebyte = new byte[bufIn.available()];
               bufIn.read(imagebyte);
               //Mapping the image as a WebResourceu2026.
               //IWDWebResource webResource = WDWebResource.getWebResource(imagebyte,WDWebResourceType.GIF_IMAGE);
               IWDWebResource webResource = WDWebResource.getWebResource(imagebyte,WDWebResourceType.JPG_IMAGE);
               wdContext.currentContextElement().setImage(webResource.getURL());
            else{
                 wdContext.currentContextElement().setImage("");
            catch (Exception e)
            e.printStackTrace();

Images not visible in LR4

LR4 only shows 15 images in a folder of 800 images. I processed these 15 images previously. When I go back into the folder, they are the only ones LR4 makes visible to me. Help!

When I first loaded the folder, I experienced no problems. I processed 15 images and stopped. The next day, when I tried to go in, problems started. The 15 processed images were visible, but the other 800-odd images were covered with a "film", looked grayish. They were not accessible. I could not click on them to process them. I have never had this particular problem happen. I tried reloading the "grayish" images - LR4 showed loading, then when the operation was complete, "No images in folder." I tried deleting the folder, then reloading it. It didn't change - only the 15 images loaded. I moved the 15 processed images into a separate folder, then loading the folder containing the remaining images - "No images in folder." Weird. I use Windows 7 on a Dell PC.

Images not visible in applet

Dear all
I have this applet for which i designed a toolbar.This toolbar has image icons that display some of the more used controlls. When i test it inside Eclipse i can see if perfectrly. But when i load it inside a browser i get some unexpected behaviour. The images for the image icons that are supposed to be in the tool bar are not visible. I checked the console output but it doesnt give me any permission errors. In the policy file that i placed in the same directory as the .html file i said to give all permisions.
Is there anything i am missing? (My images are in a diferent subdirectory then the ones where the class files are)
I know it is some sort of permission problem but dont know how to work it out. I tried by creating a signed applet too. But i think there must be something i am doing wrong.
Cheers
Dan

This is the code i am using to set the image for the button:
JToggleButton eraser = new JToggleButton( new ImageIcon("ToolbarIcons/eraser.JPG"));
eraser.setMargin(new Insets(0,0,0,0));
The result i get is the button with all the functionality but it is totaly grayed out without the image. So i am guessing the image does not get loaded.
And the second instance where i am getting the images is :
Toolkit tk = Toolkit.getDefaultToolkit();
Image img1 = tk.getImage("Cursors/rubbermouse.gif");
I am using the second case to load some images and cursors.
Cheers
Dan

Background Image not visible in a PDF report

Hi Experts!
I create a WORD 2007 template for BI Publisher 11g. I use a background image.
When I test the template locally as a PDF, the background image is visible, but when I open the Report with the BI Publisher, there is no image.
Has anyone an idea?
Regards Norbert

The size of the images was too big after compressing it. It worked fine.

Please help my flv video file works perfectly localy...but its not visible in remote ftp why??

hi All,
Please help me. my flv video file works perfectly localy in
my computer...but its not visible when i uploaded the flv html and
flash files to ftp?
thanks in advance

This suggestion worked to see the hidden folder(s). Thanks very much, but I feel like I am miles away from moving my ipod music to my new computer and getting it all to work. Here is why...
1. First when I plug the ipod in, in disk mode, to the USB slot it shows up as a K drive for a minute or so and then disappears. itunes keeps opening, asking me to sync (which will erase all my music on the ipod!) and the K drive (ipod) vanishes.
2. I pod help says to drag the itunes file out to the desktop and then drag the itunes file on the ipod into the "my music" file within documents and settings. However, there is an "ipod control" file (was hidden) and within this there is the following: artwork, itunes (with 13 subfolders of its own), device, and music. So do I just drag the itunes file inside ipod control into My music? Or do I drag the whole ipod control file? or other?
3. Additionally there are K drive (ipod) files for calendar, photos, contacts, notes, and ipod control (was hidden). I don't care about any content in the first four, but are they needed to operate? Do I drag these over also to the My music file?
Whew, very frustrating. Thanks, Ric

Images not visible in epubs in Ibook

Hi.
I try to create an epub containin lots of images. All the images are of maximum size 500*500.
When trying to view the epub in ipad, a few of the images are not seen. Only their captions are visible.
But when I double tap the place where the images should be actually present, the images open fine in full screen.
At times, the imae just appears for one second and then vanishes.
Has anybody faced similar issues? All imaes I use are jpg files.
Any help in this regard will be greatly helpful.

By George, that did it! I had regenerated previews, but I missed the main issue.
Why would thumbnails disappear like that?
Thanks for your help.
Steve

Image not visible on remote site

Similar Messages

Maybe you are looking for