Image of song is not following the song

I have a problem with my Itunes, because I am putting a list of songs to play, when the song start, I can see the image of the song on the left side of the screen, but, when the song was finish and start the next one, the image does not follow the new song in order to show me the image of the new song that is played.
Could you help me top solve this problem ?
Thanks
Ing. Arturo Ponce

Above the artwork image there is a small bar that says either "Now Playing", "Selected Song". You probably have it set on "Selected Song", which does exactly what it sounds like -- it displays the artwork of the song you selected to start playing it.
Click the bar to change it to "Now Playing".

Similar Messages

  • When I updated by iphone with IOS7, my calendar entries did not follow the icloud.  I am only showing pre set calendar entries for the year?

    When I updated by iphone with IOS7, my calendar entries did not follow the icloud.  I am only showing pre set calendar entries for the year and lost all other calendar entrie and it will not take any new entries.  They show up in my outlook, but not on my iphone, which they did before I updated my software to the new i0s7

    Before syncing, select each calendar on your Mac and back it up by going to File>Export>Export.  If anything goes missing, you can use these to restore your calendars.
    Have you tried simply force closing the calendar app on your iPhone?  To do this, double-tap the home button, locate the calendar app, then swipe up on the image above the app icloud to close it and tap the home bottom.  Then test your calendar again.

  • Rejected...We found that your app does not follow the iOS Data Storage Guidelines,

    Where and how do I fix this?
    We found that your app does not follow the iOS Data Storage Guidelines, which is required per the App Store Review Guidelines.
    In particular, we found that on launch and/or content download, your app stores 3.54MB. To check how much data your app is storing:
    - Install and launch your app
    - Go to Settings > iCloud > Storage & Backup > Manage Storage
    - If necessary, tap "Show all apps"
    - Check your app's storage
    The iOS Data Storage Guidelines indicate that only content that the user creates using your app, e.g., documents, new files, edits, etc., should be backed up by iCloud.
    Temporary files used by your app should only be stored in the /tmp directory; please remember to delete the files stored in this location when the user exits the app.
    Data that can be recreated but must persist for proper functioning of your app - or because customers expect it to be available for offline use - should be marked with the "do not back up" attribute. For NSURL objects, add the NSURLIsExcludedFromBackupKey attribute to prevent the corresponding file from being backed up. For CFURLRef objects, use the corresponding kCFURLIsExcludedFromBackupKey attribute.

    You're submitting a Newsstand app, right? This error is still under investigation, but the current workaround is create SD (1024x768/768x1024) cover images for your HD (2048x1536) folio renditions and try again.
    More info here:
    http://forums.adobe.com/message/4730637#4730637

  • Clearing Document Date do not follow the define clearing date in F-03.

    Hi,
    Clearing Document Date do not follow the define clearing date  BKPF-BUDAT in F-03.
    My user received the unpresented check statement from the bank on 31 Dec 2010. As 1 Jan 2011 is holiday and he came back to the office on 5 jan 2011. He post manual upload (Debit : Bank Outgoing and Credit : Unpresented Cheque) posting date 31.12.2010 (period 12/2010 and 01/2011 still open) . Hence the next step (same date on 5 Jan 2011) is to clear the Bank outgoing using F-03. He put 31.12.2010 as his Clearing date BKPF-BUDAT but when the system post the clearing date is 04/01/2011.
    Please help

    Hello,
    Hope it helps.
    But i can recall for the EBS bank statement upload into a previous fiscal year, ie, 31.12.2010.  I had to close the current fiscal year temporarily.
    See what happens in your system when it tries to clear with F-03.  Though as mentioned re-check as F-03 will default to the system date --- today.
    Regards
    Waza

  • Process does not follow the routing ends up in complete status

    Installed Adobe LiveCycle server ES 2.5 with SQL Server 2008 as database
    And followed the tutorial ‘Create Your First LiveCycle Application’
    Deployed it on the server when I test the same
    i.e. when the workspace user fills in form details and hits complete button it ends up as status complete
    And not assigned to next user in the route
    The process does not follow the routing it ends up in complete status
    And nothing shows up when trying to record and play back the process
    Tried invoking Via workbench too
    no errors in the server log
    Could this be an installation issue any pointers appreciated
    Please advise

    Issue with Jboss as it was taking longtime time to start due to low CPU ideally it should not take more than 3 to 5 minutes
    Process works now

  • All photos does not follow the stream

    Seemingly only random pictures does not follow the photo stream from iphone to macbook - any clues how that can happen, or where I start the troubleshooting..?

    ..and a little bit more specific:
    I noticed that some photos in the iPhone photo album doesn´t appear in the photo stream. I cannot find a continous error in this behaviour: this summer I noticed that every other picture was missing in the stream, but just from one weekend. Last weekend just ONE picture in the album was missing in the stream.
    It´s really odd, wouldn´t you say?
    I haven´t really made full follow-up during the autumn, since I hoped this phenomena would "disappear" along with the continous upgrading of iPhone, Macbook, iPhoto etc. So, it must be the Cloud that behaves strangely...?
    The one picture from last weekend was imported to iPhoto when connecting iPhone and macbook "by cord" along with the videos,
    The thing with the iCloud photo stream shod be that you wouldnt have to keep track of your photos by counting them or relying on cord connection, right?
    Any ideas, anyone?

  • Adding an image when signing, but not in the signature field, in Reader

    Hi,
    I would like to know if it is possible to add an image to a pdf document when I sign the document in Reader.
    I do not want to add the image in the signature field as a signature, but rather below the signature field. The image is 'n barcode providing me with more information on the signature.
    I have looked at the Stamper example, but this functionality is not avialable in Reader.
    Thank you,
    Magda

    If you insert after signing you will break the signature!!   You need to do any such stamping BEFORE signing.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Wed, 26 Oct 2011 23:54:15 -0700
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: Adding an image when signing, but not in the signature field, in Reader
    Re: Adding an image when signing, but not in the signature field, in Reader
    created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3992619#3992619

  • Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email"  I did not follow the link but I can't quit safari.  Can't shut down either Safari stops my request

    Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email"  I did not follow the link but I can't quit safari.  Can't shut down either Safari stops my request. How do I get Safari to be normal again?

    Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email"  I did not follow the link but I can't quit safari.  Can't shut down either Safari stops my request. How do I get Safari to be normal again?

  • Connection is not following the Sticky database when one router is comming to up state.

    Dear Team,
    We have 2 routers configured  in Cisco ACE.( Router 1: 10.250.226.4,Router 2: 10.250.226.6) and VIP 10.250.226.19. In a normal scenario all the client connections are perfectly handled by ACE and Its sending to client request to router as per the sticky database. When the router 10.250.226.4 is down, ACE cleared all the sticky database entry belongs to the 10.250.226.4. All the client connections are shifted to router 10.250.226.6.
    when router 10.250.226.4 is  comes, backup connections are not loadbalance properly. That is connection not following sticky database for second connections of the same ip and giving issue in establishing IPSEC connectivity. Please find the below output.
    switch/RRI# sh sticky database client 10.239.10.86
    sticky group : STIK-RRI-FRM
    type         : IP
    timeout      : 1440          timeout-activeconns : FALSE
      sticky-entry          rserver-instance                 time-to-expire flags
      ---------------------+--------------------------------+--------------+-------+
      10.239.10.86          CISCO-7206-06:0                  65274          -
    switch/RRI# show conn | i 10.239.10.86
    1517152    2  in  UDP   90   10.239.10.86:4500     10.250.226.19:4500    --
    1427552    2  out UDP   9    10.250.226.4:4500     10.239.10.86:1637     --
    3051606    2  in  UDP   90   10.239.10.86:500      10.250.226.19:500     --
    3049659    2  out UDP   9    10.250.226.6:500      10.239.10.86:44977    --
    Please find the below sample configuration we are done in ACE.
    parameter-map type connection UDP_PARAM_MAP
      set timeout inactivity 86450
    sticky ip-netmask 255.255.255.255 address source STIK-RRI-FRM
      replicate sticky
      serverfarm RRI-FRM
    class-map match-all RRI-VIP
      2 match virtual-address 10.250.226.19 any
    policy-map type loadbalance first-match RRI-VIP-l7slb
      class class-default
        sticky-serverfarm STIK-RRI-FRM
    policy-map multi-match RRI
      class RRI-VIP
        loadbalance vip inservice
        loadbalance policy RRI-VIP-l7slb
        loadbalance vip icmp-reply
        connection advanced-options UDP_PARAM_MAP
    interface vlan 90
      ip address 10.250.226.17 255.255.255.240
      peer ip address 10.250.226.18 255.255.255.240
      access-group input ALL
      access-group output ALL
      service-policy input REMOTE_MGMT
      service-policy input RRI
      no shutdown
    As per the analysis its looks seems to be tthe bug CSCsv63364, CSCsu95356. Kindly suggest how we can resolve this issue.
    Image version: A2(3.4)
    Thanks in advance.
    Regards,
    Ranjith

    Hi,
    Its important to know whether there was a sticky entry when the router went down and the time it came back up. Leastconnection shouldn't be a problem here.
    If the IPSEC connection is active but not the UDP 500 connections, after timeout the UDP 500 connections will be removed as well as the sticky entry. If the current active IPSEC connection suddently needs to refresh SA's a new UDP 500 connection will be open and it could be sent to a different server. There is no evidence that this is the problem but want to try a higher sticky timeout has a fix for this.
    Siva

  • Background image in a table not in the document

    hello forum, i would like to put a background image in a table so that I am able to put things on top of the image and so it moves with the table.  I can only figure out how to do it in the page properties so that it is static on the page. Can anyone please tell me if what I am trying to do is possible? thank you in advance. Jim.

    Hi John,
    thanks for your hint, now I've got it. And so I was able to integrate/to play with Gramps hint in some variations too.Hans-G.

  • Inspite of specifying my homepage, firefox is not following the command?

    Although, the internet connection is renewed, the opening page still says internet connection expired. I went through the the options to change the homepage to www.google.com, but it is not accepting the change.

    *"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    *"Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies
    See also http://kb.mozillazine.org/Error_loading_websites - "Error_loading_some_websites"

  • How can i check the image is avilable or not in the MIMS folder

    Dear All,
                       My requierment is, the resource of the Imge will come from the backend. so i nedd to check there is any IMGE avilable in the MIMS folder. Any one help me how to do this.

    Hi Bhargava,
    The following code will throw a 'File not found exception' if the file mentioned is not present in the mimes->components->application folder
         try {
              String resourcePath = WDURLGenerator.getResourcePath(wdComponentAPI.getDeployableObjectPart(),"XYZ.jpeg");
              IWDResource resource = WDResourceFactory.createResource(new FileInputStream(new File(resourcePath)),"XYZ.jpeg",WDWebResourceType.JPG_IMAGE,true);
         } catch (WDAliasResolvingException e) {
              wdComponentAPI.getMessageManager().reportException(e.getMessage(),true);
         } catch (FileNotFoundException e) {
              wdComponentAPI.getMessageManager().reportException(e.getMessage(),true);
    Also check with these image Resource types. This holds good if the image type is either gif or png. The code given above will check for the JPG images.
    WDWebResourceType.GIF_IMAGE
    WDWebResourceType.PNG
    I hope this helps!
    Thanks and Regards,
    Pravesh

  • PIR net price not follow the condition screen

    Hi all,
    I have a question regarding my pricing condition maintained in a PIR.
    In one of my PIR record, there is two validity line records in the pricing condition with the following date range and value:
    1 - 2008.04.01 to 2010.12.31 ==> PB00 is USD853,00/1 PC
    2 - 2011.01.01 to 2999.12.31 ==> PB00 is USD853,00/1 PC
    However, the strange thing is that in the Purchasing Org screen in the PIR, the NET price value is "879,00 per 1pc" even with the VALID-TO field value as "2999.12.31".
    May I know why the the Net price in this view not picking up the USD853? Something go wrong in the PIR?
    (in between the Pr Date Category is 2-delivery date).
    Please help.
    tuff

    Hi Jurgen,
    I am still a little bit confuse as of why in the Purchasing Org screen in the PIR, the NET price value is "879,00 per 1pc" even with the VALID-TO field value as "2999.12.31".
    Question1-
    Shouldn't the above field automatically pick-up what is maintained in the condition screen of the most latest pricing record which is the USD853,00 for the second line item I described previously?
    Question2 -
    What have caused the 879,00 being inserted into the Purchasing Org screen in the PIR, the NET price field? where is this USD879,00 coming from??
    Thanks and please help.
    Tuff

  • Dbca does not follow the maxsize values within .dbc for the tablespaces

    Does someone nows if dbca has some sort of bug when reading a .dbc file and following what is writen there?
    Here is a tablespace example where maxsize simples is not considered:
    <Name id="2" Tablespace="UNDOTBS1" Contents="UNDO" Size="26" maxsize="2G" autoextend="true" blocksize="8192">{SYSTEM_DG}/oradata/{DB_UNIQUE_NAME}/undotbs01.dbf</Name>
    Am I setting maxsize in a wrong manner?
    Is there some place which explains what exactly are the possible keywords for each tag and its valid values?
    I'd really appreciate any help.
    Thanks,
    Fred

    dbc is the extention of dbca templates. If you have existing database where UNDOTBS has option MAXSIZE XXXX, then using DBCA you can generate new template and then investigate what tags uses DBCA for such option.

  • Images open showing grid, not all the colors

    Hello:
    I'm having a problem opening my images.  When I select open and select an image, it just opens with the square grey & white blocks in a grid.  The only way I can get the image to fully show with color is when I go to the channels on the lower right, and constantly select Ctrl+2 on the keyboard, for the image to then come in.  I should not have to do this, it should open with all the colors showing up front.
    Can someone help me where I can just open an image w/o manually selecting the color channels everytime?  Thanks.
    Photoshop CS5

    The grid indicates transparency everywhere so is the Opacity set to 0 or have you applied a Layer Mask with Hide Everything set?  Do another screen capture with the Layers pallet visible instead of Channels.
    If the Layers are setup correctly, have you tried turning off OpenGL in Edit / Preferences / Performance?  There may be some incompatibility with your video card or its drivers.
    Did things used to work and suddenly stopped?  Have you updated to PS CS5 12.0.3 recently? 
    Another odd thing is that your image is indicated as being 1280x1024 in the tab-title area, but the onscreen representation appears square.

Maybe you are looking for