Image opens in CS3 not Camera Raw

Recently when i open a dng image it opens in CS3 not Camera Raw. How do I get the raw/dng images to open in Camera Raw?
Thanks
Gene

From Bridge, highlight the image(s) you want to open in Camera Raw and then press Ctrl+R.

Similar Messages

Brown splotches on image in Lightroom but not Camera RAW?

I'm using Lightroom 4.1 and Photoshop Camera RAW from CS5 version 6.6
In Lightroom I'm getting some brown splotches on the faces of the groomsmen to the right. These splotches while less noticeable also appear on the bride and groom.
Process the same RAW file in Camera RAW and there are no brown splotches anywhere on the photos.
Any thoughts on how I can get rid of this anomaly in Lightroom?
See attached photo. Lightroom file on top and camera raw file on the bottom.

That catches most at some time!!!

Photoshop cs4 opens images black and only in camera raw

I'm running Photoshop cs4 on a pc. Recently, it began having 2 issues. First, it started opening everything into Bridge Camera Raw instead of just opening the image itself. Next issue is that when I attempt to open an image from Camera Raw, it opens black. I can see the image is there in a layer, but the working screen is black. Every once in a while it will open normally. This is with all images, no matter what size the are.

On a Mac I don't know which directory it should be in.
Camera Raw preferences: Bridge: menu Adobe Bridge/ Camera Raw preferences.
Inhere you can set the wished behavior for tiff. By default it shows tiffs
only in ACR when you choose to do so with right mouse click menu (open in
Camera Raw) or if the Tiff had earlier been altered in ACR, then it opens
automatically in ACR unless you choose not to do so.
About Plug in in Photoshop, Menu Photoshop/ about Plug In

How do you open more than one image at a time in Camera Raw?

We used to be able to select more than one image from a folder and process one after the other in camera raw. Now we can only do one at a time. Is there a secret keyboard short-cut to allow this still?

Which operating system are you using?
One should still be able to open multiple files into camera raw.
Camera raw files. tiffs and jpegs.
If in the pse 13 Editor in the Expert mode you go to File>Open in Camera Raw, you aren't able to open more than one file into camera raw?

RAW (NEF) photos from my new Nikon D750 will not open with Photoshop Elements11 Camera RAW.

RAW (NEF) photos from my new Nikon D750 will not open in Camera RAS with Photoshop Elements 11. This has not been a problem with previous Nikon cameras. I'm using a MacBook Pro with OS X 10.9.5. How can I solve this problem? Thanks.

Aside from upgrading to pse 13, you can use the 8.7.1 adobe dng converter to convert the files to dng copies, which pse 11 should then open.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
how to use
Camera Raw: How to use Adobe DNG Converter - YouTube

PSE 6 Opening JPEG & TIFF in Camera Raw using Adobe Bridge

Hi there,
I just purchase PSE 6 for mac. This comes with Adobe Bridge CS3. I have purchase a tutorial book as I am brand new to Photoshop. I have become stuck at chapter 1 !!!!!!
I am trying to open a JPEG image using Camera Raw within Bridge, according to the book all you do is select the image and press cmd +R to open camera raw. I cannot get this to work, it does nothing at all. It also claims that you can open the image you can use open as and select camera raw, I do not seam to have this option
Any help would be appreciated
Chris

Try asking in the PS Elements forum.
http://forums.adobe.com/community/photoshop_elements

Mac computer: New Nikon d300s, CS3, and Camera Raw

I just purchased a Nikon d300s. I had a Nikon d50, Mac, iPhoto, CS3, and Camera Raw 4.6.0.30. With Nikon d50, no problem opening an image from iPhoto into Camera Raw/CS3. With the new D300s, the image opens into CS3 but does not open into Camera Raw. Do I have to buy CS4?

No, you do not have to. You can alternatively use the DNG Converter, which will process your D300S NEF files into DNG files, which can then be opened in CR 4.6 in CS3. The latest version of the DNG Converter, which supports the D300S, is currently in Release Candidate phase and is available here:
http://labs.adobe.com/wiki/index.php/Camera_Raw_5.5
Eric

Do I need to uninstall CS3 for Camera Raw to work on a trial CS4

I have CS4 on trial and have downloaded camera raw plug - i am not able to open my raw files do I need to uninstall CS3 for this to work?

Catherine Cotton 1 wrote:
i don't understand "navigate to the root of the local disk" but i have found "library/application/support/adobe but can't see "plug-ins"
You are looking at the WRONG Library, Catherine. What you describe is the Library in your user folder (home folder) and you don't want that.
You want the Library at the ROOT level of your hard disk, not your user Library.
This image shows ACR 4.x installed for CS3:
Click on thumbnail for full-size image. Command-Click on thumbnail for faster opening in a new browser tab.
And here's the Path for ACR 5.2 in CS4, which is the same for ACR 5.3:
Catherine Cotton 1 wrote:
- is there an easier way to install this -
No.
If you have CS3 only and your camera is not supported by ACR 4.6, then you also need to download the free, stand-alone Adobe DNG Converter 5.3 which does not need any version of Photoshop to run. You need to launch it, convert your raw files to DNGs, then open the DNGs in Camera Raw 4.6 hosted by CS3.
Here's a list of which version of Camera Raw supports which camera models:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407111&sliceId=2
You can skip the DNG Converter step if you upgrade to Photoshop 11.0.1 ("CS4") and update to ACR 5.3, which is a far more powerful and versatile version of Camera Raw.

Problem with Photoshop CS6. If I open a file using Camera RAW

I have a new problem with Photoshop CS6. If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to. I don't know if I changed something by accident or not.
Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..." The save as window opens showing the file name and format. The default format seems to be .PSD. I use the drop down to select .jpg. The file saves normally as a .jpg. When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite but it always used to do that. This adds a few extra steps when closing a document and it really slows me down.
In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
Any ideas?
Thanks in advance

You are in the wrong forum; You actually need Photoshop forum at this link:
<http://forums.adobe.com/community/photoshop?view=discussions>
Hope you can repost your question at the correct link.

Photoshop on start or opening a photo in camera raw puts computer in Restart mode.

When I start my computer and try to open Photoshop or open a photo in camera raw the computer some of the time will go into restart mode and again and again. I have removed all of Photoshop CC2014 and reloaded from adobe and have the same problem. Any ideas as to what might be happening?

Quite likely the problem is not Photoshop as an application like that should not be able to crash/restart your OS.
Please read these (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

How to open smart object in camera raw

Hi,
As the subject line reads, I'm having trouble opening a smart object in camera raw. Every tutorial I read or watch says, "double click on your smart object thumbnail to open the image in camera raw." But every time I do, all it does is open a copy of the image as a .psb file.
Before you ask,
-The images I work with are stock images, JPG's.
-I've tried to find an option in Photoshop > Preferences that will let me open smart objects in camera raw all the time;
-I've tried opening these files directly in camera raw. When I do, there's a little link below the image that reads something like,
Adobe RGB (1998); 8 bit; 2008 by 3000 (6.0 MP); 240 ppi
I click on it, and there's a 'click box for "open in Photoshop as smart objects"; clicking this will allow me to open the image in Camera Raw upon double clicking on the thumbnail. But it will only work that way for that one instance of that one image.
Anyway to make this happen?
Thanks,
KP

What is the .extension after your filename on this file? Needs to be .jpg, .tif or .psd. Then choose open, and change format to Camera raw.
If you are saving as .jpg, the smart object has been bitmapped, and is a no longer smart object.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Applescript: open a JPG in Camera Raw

Hi,
I am trying to open a jpg in Camera Raw unfortunately without success. The applescript command
open <file> as Camera Raw
opens the jpg as a normal document and not within Camera Raw as I would have guessed. Is it even possible with applescript?
A workaround could be to make the open dialog appear so that the user selects the file and chooses Camera Raw as format manually (the photoshop preference to open all jpg in Camera Raw as default is not an option here). Unfortunately the command
Photoshop open dialog
takes no arguments and defaults every time to the desktop folder from where the user has to navigate to the correct location. Is it possible to change the start location of that open dialog?
Thanks in advance.

I hesitate to revive a thread from 2009, but I'm trying to do the same thing with CS 6.
I have the program set to open JPG and TIF files by default via the camera raw setting. However, I've tried various Applescript commands to do the same thing, and it always opens without the Camera Raw dialogue. I'd like to know what specific Applescript command I need to put in, please.
Many thanks...

Opening multiple jpegs in Camera RAW

I can open a single jpeg in Camera RAW by changing the format option to Camera RAW. If I want to process several images at the same time, in Camera RAW, I lose the format option for Camera RAW.
Is it possible, in Elements, to open multiple jpegs in Camera RAW format?
Mary Lou

As mentioned above that multiple JPEGs can't be opened. I am also a huge fan of Camera Raw and recently moved to Lightroom which gives wonderful flexibility to use all these controls for various file formats with ultimate ease... Would recommend to start with Trial....
http://photoshopelementsbyadobe.blogspot.com/search/label/Adobe%20Camera%20Raw

Open Photoshop files in camera raw

Is there a way to open Photoshop files in camera raw
Thanks
Bob

Only tiff, jpeg, and camera raw files will open in ACR.
Detailed info: Creative Suite * Navigate, open, and save images in Camera Raw
Gene

Image opens in CS3 not Camera Raw

Similar Messages

Maybe you are looking for