Image path displays instead of image

Firefox v20.0.1, Win7 32 bit.
This web page ( http://zone.ni.com/devzone/cda/epd/p/id/5336 ) does not display the "flowchart"image at the bottom of the page immediately following the text "The following is a map of other documents..." On a correctly working page, the image is a flowchart "navigation" image that opens new pages depending on where you click on it. In firefox only a box with an ftp path to the image is displayed in its place. I have seen the problem on other web pages as well.
Actions taken:
The pages displays correctly in IE v10. This problem happens on one computer. Different computer, same firefox version displays correctly. Different computer older firefox version (v17?) displays correctly.
* I have tried disabling all plug-ins and extensions.
* I have created a new profile. Seems like the first time I did this, the page displayed correctly, but when I refreshed (F5) the image is gone and the ftp path box is displayed. Subsequently created new profiles do not display the page correctly.
* I have tried resetting Firefox and the page still is not displayed correctly.
Troubleshooting:
Ctrl-shif-K, opened the Web Console, cleared the console output, refreshed the page by pressing Ctrl-F5. The following is several lines following the first error on the console:
[09:12:29.360] Unknown property '-moz-border-radius'. Declaration dropped. @ http://zone.ni.com/widgets/share/addthis/1.0/css/share.css:11
[09:12:29.360] Expected declaration but found '*'. Skipped to next declaration. @ http://zone.ni.com/widgets/share/addthis/1.0/css/share.css:13
[09:12:29.406] GET http://ct1.addthis.com/static/r07/core076.js [HTTP/1.1 200 OK 167ms]
[09:12:29.392] Unknown property 'size'. Declaration dropped. @ http://zone.ni.com/css/global/us/zoneprint.css:15
[09:12:29.392] Expected declaration but found '@bottom-center'. Skipped to next declaration. @ http://zone.ni.com/css/global/us/zoneprint.css:17
[09:12:29.497] GET http://zone.ni.com/css/global/us/thecore.css [HTTP/1.1 200 OK 26ms]
[09:12:29.452] Expected identifier for class selector but found ' '. Ruleset ignored due to bad selector. @ http://zone.ni.com/css/global/us/thecore.css:115
[09:12:29.453] Error in parsing value for 'filter'. Declaration dropped. @ http://zone.ni.com/css/global/us/thecore.css:259
[09:12:29.453] Error in parsing value for 'cursor'. Declaration dropped. @ http://zone.ni.com/css/global/us/thecore.css:259
Any help is greatly appreciated.

You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the affected files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Similar Messages

Getting an image path & display an image in JSp

hi
How to get image & particular image path stored in Database .in Jsp [ Image stored in anther drive ( D:\images) ]
& my webroot dir in c:\apachetomcat\webapps....
Any Help will be Appriciated
[email protected]

Crossposted in 10 forums.

Getting an image path & display an image in JSp--webserver

hi
How to get image & particular image path stored in Database .in Jsp [ Image stored in anther drive ( D:\images) ]
& my webroot dir in c:\apachetomcat\webapps....
Any Help will be Appriciated
[email protected]

Crossposted in 10 forums.

Image not displayed correctly in image control at small zoom level

I am displaying an image in an image control with a zoom factor of ~0.015 and it appears as shown in image 1.jpg. When I zoom in a little more to ~0.016 the image is displayed correctly as shown in image 2.jpg. Both images are attached.
Why is the image displayed as a "grey strip" in the first image? What do I need to do to have the image displayed correctly at any zoom factor? I am using LV 2011 with the associated vision development module on Windows 7.
Thanks,
Jonathan-LV
Solved!
Go to Solution.
Attachments:
Image 1.jpg ‏133 KB
Image 2.jpg ‏152 KB

Hi Jonathan,
Did you try resizing your image dimensions, as I suggested in my previous post? Anti-aliasing is an expected behavior; as you zoom out, the image has to be resampled in order to be displayed properly. At some point, LabVIEW assumes that the image has been resampled to the point where it no longer resembles the initial image, and so it greys the image out. In the case of your image, that is not the case. As I said, I believe an acceptable workaround would be to use IMAQ resample to half or quarter the pixel dimensions of your image, at which point it should be able to be displayed at a higher zoom factor.
Best,
Dan N
Applications Engineer
National Instruments

Images print URL instead of image

I have developed crystal report which shows multiple images(stored as URL pointing to Unix box location where images are placed). Same is publised to Infoview where i can see the images properly.When i am printing the images,its not printing the image instead just showing the URL.
Please help how to resolve this.

--Which viewer you are using to Print ? ( DHTML, ActiveX, Java ?? )
--Whatever viewer you were using, can you change it in 'preferences' and see if you get same error in toher viewers?
--Are you flexible in using Printing the report after it get exported to PDF ? If yes, you can use this setting from CMC ?
--If you export the report to PDF and print from Infoview, does the images print fine?

Image name shows instead of image?

i have done several homepages in iWeb.
when i tried to make one new today, as usually i dragged the picture from media archive into the page.
instad of showing the image on my iweb page, the filename shows.
and i cant find whats wrong. i want to use the image ...right now i just see file name?

i read some about backing up iweb ...and located the file "domain.sites2"
might klicked it of misstake i dont know.
when i drag an image to the page its wierd...i just see the linkname still....if i leave mouse pointer over image name ill see the path to the domain.sites2 folder...
adding pictures not been used before maybe klicking that file will insert, images used earlier wont show, just file name...

Display image from image path (ASP)

Help needed please. Sorry if the topic has already been
discussed. I did a search but it returned nothing.
My problem.
I can display images on my website by choosing the datasource
and the image path from by database. No issues here. What I want is
to be able to open up a larger image by clicking on this image.
I created another page. On this page is an image placeholder.
The source again is the datasource with the image path to a larger
image. I used a behaviour to open this page however, it shows the
same image (the 1st record in my recordset) whichever image you
click on my origianl page.
Can someone please tell me how to do it? It would be
appreciated.

I'm assuming that you are using a repeat region to display
the original
images.
You will need to pass the Primary Key to the new page, and
filter the
recordset on the new page based on that Primary Key.
For example, this would be the link to the new page:
<a
href="page2.asp?ID=<%=(rsImages.Fields.Item("ImageID").Value)%>"
Then on the new page filter the recordset SQL based on the
ImageID,
something like this:
<%
Dim rsImage__MMColParam
rsImage__MMColParam = "1"
If (Request.QueryString("ID") <> "") Then
rsImage__MMColParam = Request.QueryString("ID")
End If
%>
<%
Dim rsImage
Dim rsImage_cmd
Dim rsImage_numRows
Set rsImage_cmd = Server.CreateObject ("ADODB.Command")
rsImage_cmd.ActiveConnection = MM_connImage_STRING
rsImage_cmd.CommandText = "SELECT * FROM tblImages WHERE
ImageID = ?"
rsImage_cmd.Prepared = true
rsImage_cmd.Parameters.Append
rsImage_cmd.CreateParameter("param1", 5,
1, -1, rsImage__MMColParam) ' adDouble
Set rsImage = rsImage_cmd.Execute
rsImage_numRows = 0
%>
Ken Ford
Adobe Community Expert - Dreamweaver
Fordwebs, LLC
http://www.fordwebs.com
"leeweatherill" <[email protected]> wrote in
message
news:ft00gm$spm$[email protected]..
> Help needed please. Sorry if the topic has already been
discussed. I did a
> search but it returned nothing.
>
> My problem.
> I can display images on my website by choosing the
datasource and the
> image
> path from by database. No issues here. What I want is to
be able to open
> up a
> larger image by clicking on this image.
>
> I created another page. On this page is an image
placeholder. The source
> again
> is the datasource with the image path to a larger image.
I used a
> behaviour to
> open this page however, it shows the same image (the 1st
record in my
> recordset) whichever image you click on my origianl
page.
>
> Can someone please tell me how to do it? It would be
appreciated.
>

Podcast image not displaying! Help please!

Hello,
any help on this would be greatly appreciated as I've been troubleshooting for the past month and can't seem to fix this...
i recently had my podcast channel approved but the podcast image is still not displaying...
when I followed the instructions given by Apple on their podcast start up page, I opened iTunes, clicked File, clicked Subscribe to Podcast and entered my RSS feed address. Everything displayed fine, image was working an everything.
however, the channel has now been approved and the image is still not showing up in the iTunes store....
does it usually take a while for images to display?
my image is 1900x1902 and is 2.5 MB.
Does it have to be perfectly square in order for it to be displayed? If so, how come it displayed when I entered the feed url after clicking 'Subscribe to Podcast' in the iTunes File menu?
Is there a size limit? Again, if so, how come it displayed when I entered the feed url after clicking 'Subscribe to Podcast' in the iTunes File menu?
THank you for your help.
regards,
J

The image filesize is much too large at 2.5MB: it must be less than 500kB and I'm surprised your feed wasn't rejected in the first place because of this. I would recommend reducing the dimensions to 1400 x 1400 to be on the safe size, and reducing the file size to below 500kB is essential (and it must be JPG or PNG).
When you've changed it, also change the file name, amend the feed and reupload it. It will take quite some days before the image appears in the Store.
The image appears in My Podcasts view when subscribing but probably the iTunes application - which is completely separate from the Store - isn't so fussy. The Store caches the image so you can see why they would want to limit the filesize, given the many thousands of podcasts in the Store.
When you have a question please always post the URLs of your Store page and of your feed. I was able to give you an answer this time, but in most cases it's necessary to be able to look at the feed.

InDesign CS5 to PDF and Image Paths

Hi, all
When I export my InDesign layouts as PDFs, is it possible to include somewhere, somehow in the PDFs the image-path information of all images in the layout?

This is not a one-step solution, but it would give you what you want:
Choose File > Package. At the bottom of the dialog, click Report... This will save a text file with all the information you'd want about the file, including the path of all linked graphics. If you wish to could create a PDF of that text file, and merge it or send it along with the PDF for the document.

Display SWFs instead of images?

Hi all,
I built some dynamic pages using ADDT, and on some of the pages, the customer wants .swf files to display instead of an image. I added a field in my mysql database that holds the path to the flash files (for example...."flash/file-1.swf"), and then I tried to put a "placeholder" and bind the field from the recordset I created. However, this didnt work.
Is there a way to pull and place an swf onto a dynamic page like this? What am I doing wrong?
Any help is appreciated
John

Hi Shane,
I didnt think it would be hard to do either, and maybe its just because I am juggling 5 other projects that I dont have the focus right now and its making this more difficult.
Ok, I can post code but Ill tell you what I did. I created several flash files for each page (i.e. 1.swf, 2.swf, 3.swf, etc) and then in my MySQL database, I added a field to hold the path to those files for each page.
In my page I created a filtered recordset. I place in the swf file where i wanted it and then went to the file field (this is in Dreamweaver) then opened the dialog box. Then I hit "Data Sources" and selected the correct field from my recordset that holds the path in the db.
When I got to test the page, nothing comes up where the swf should be. When I look at the code, it is correctly bringing up the source from the database, its just not showing the file.
Any ideas?

Image path sets ( servername) instead of \\servername

Due to a hardware meltdown I have had to rip the NW server out of the tree
and install a new one.
I have re-installed the server NW65sp8 and reinstalled ZENworks for Desktops
7
Now, When I set an imaging job on a workstation I browse to the server etc
and set the file path.
When I click apply or ok leave the object and go back in the path has
changed;
eg
(ZFDSRVSR) USER\zenimg\ws_master.zmg
instead of
\\ZFDSRVSR\USER\zenimg\ws_master.zmg
Any ideas on how I fix this?
Manual imaging works ok. I have deleted the ws object and re imported into
eDir
Tom

I have resolved this.
>>> On 21/07/2010 at 12:54 p.m., in message
<[email protected]>,
Tom Cummings<[email protected]> wrote:
> This is turning out to be serious ant not server related. I installed a
> new
> ZFD7 server into a new container. Setting an image path on using that
> server reproduces the same problem.
>
> Help! :‑(
>
>
>
>>>> On 20/07/2010 at 9:07 AM, in message
> <[email protected]>,
> Tom Cummings<[email protected]> wrote:
>> Due to a hardware meltdown I have had to rip the NW server out of the
>> tree
>> and install a new one.
>>
>> I have re‑installed the server NW65sp8 and reinstalled ZENworks for
>> Desktops
>> 7
>>
>> Now, When I set an imaging job on a workstation I browse to the server
>> etc
>> and set the file path.
>>
>> When I click apply or ok leave the object and go back in the path has
>> changed;
>>
>> eg
>>
>> (ZFDSRVSR) USER\zenimg\ws_master.zmg
>>
>> instead of
>>
>> \\ZFDSRVSR\USER\zenimg\ws_master.zmg
>>
>> Any ideas on how I fix this?
>>
>> Manual imaging works ok. I have deleted the ws object and re imported
>> into
>> eDir
>>
>> Tom

How to display Image as Error instead of Error Message from Resource Bundle

hi,
I want to display images as error instead of error message from Application Properties in struts1.1
Ex:
I want to prompt a user to type password length min. of 6 char. If failed, need to show simple image as error rather
"Length should be min. 6".
reagrds
parthiban.

BalusC wrote:
RahulSharna wrote:
in the respective resource bundle modify the value by something was below
error.password.length=<img src="/images/password-Length.gif" alt="Password Length Issue" align="center"/>
OK, it apparently allows HTML in error messages.Yes struts allows it :)

Getting image path from database( Remote server) & display in jsp page

hai frnds,
i have one doudt regarding in my web application Development
. I want to Getting image path from database( **Remote server**) & display in jsp page here iam forwarding my control through Servlets
how this will passiable
Thanks in Advance
SonyKamesh
[email protected]

hai
I think ur doubt will be...
1) Getting a Image From Remote Server( & U stored a only path name in Data Base)
2) Image r stroed in saparate Drive( Not in Webroot-- where u Created domine )
Please Any Help Will be Appriciated
[email protected]
Edited by: Sonykamesha on Dec 18, 2007 11:02 PM

Desktop background displays path in middle of image

Regardless of the background image I choose, the path displays in large white text across the image. How can this be fixed?

Regardless of the background image I choose, the path displays in large white text across the image. How can this be fixed?

Need to capture multiple image paths for responsive design when only one will be displayed at a time

I'm new to CQ and am having enough trouble following the documentation on image components as it is (why is there no master reference for all this?). I have a requirement where we need to capture three versions of an image and put the URLs into three attributes of a tag. The appropriately sized image will be selected via JavaScript based on the browser/device capabilities. I need to know how to capture those images when seemingly only one at a time can be dropped onto the page. Or perhaps there is a more CQ solution to this.

Hi,
You need to customize image component. I mean selected image is a asset in the repository and each asset by default has 3 rendtion generated when the image is uploaded in the dam.
For example when you upload image.jpg file into the DAM, standard workflow is launched and after a while inside the repository (see paths) are created following renditions:
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.140.100.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.319.319.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.48.48.png
This process can be customized by changing /etc/workflow/models/dam/update_asset.html workflow and modifing "Thumbnail creation" step by adding in the Process tab -> Arguments field new values for new rendition. So for example if you add there [400,400] new rendition will be created in the path
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.400.400.png
Next step is to customize jsp for image component. Using path to the drag and dropped image from a component attributes you can easily take all renditions iterating on the /content/dam/project/image/yourimage.jpg/jcr:content/renditions node and then set paths to all renditions in the tag attributes. Then like you wrote using js you can select proper rendition.
I hope that it hepls you.
Regards,
Adam

Image path displays instead of image

Similar Messages

Maybe you are looking for