Image Placement when moving from all images to Quick collection

It would be nice if your position in the main catalog would remain intact when you move from the main group of imgages to the Quick Collection. Presently, you scroll down through thousands of images in the main collection and find an image that you feel might be similar to one you've already added. You go to check the Quick Collection to review your selection and when you go back to continue searching the main collection, the cursor takes you back to the very top of the page of the main collection. You then have to scroll through thousands of images you've already looked at. Is there currently a way around this anyone?
An even better option would be the ability to open the Quick collection or any other Collection and view the images in side by side windows with the main collection. Aperture allows viewing in this manner. this would be a nice addition to Lightroom.

Absolutely agree. My request is here:
http://www.adobeforums.com/cgi-bin/webx/.3bc3473c/0

Similar Messages

When moving from a list of threads view to a thread would be nice to jump to last thread read.

When moving from a list of threads being viewed to a thread, it would be nice to jump to last thread read or first unread thread.
Sometimes the threads get rather long. Sometimes I haven't read a thread in awhile & I forget where I have left off reading a thread. It would be nice to have an icon to click on to move to your last read post or the first non-read post.
Seems this could be implemented in javascript without too much problem. Might be a problem of when to get rid of the tracking data.
Robert

This would be a new capability. I didn't know you could jump directly to the last post in a thread by clicking on the posters name in your discussions. However, I am interested in jumping to the first post that I haven't read.
Since writing my original post, I realize that software doesn't know what posts I have read. Lets say there are are 26 posts in a thread. Lets assume these are divided into three pages with at most 10 items in a page:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z
The software know that I have viewed the first three pages. It doesn't know what post on the pages I have read. The software would need to assume I have read all the available posts on a page.
Now lets assume that 12 more post were added. This results in:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z, aa,bb,cc,dd
page 4 -- ee,ff,gg,hh,ii,jj,kk,ll
It would be nice if I could go to aa.
Jumping to the last post in the thread doesn't hack it. You have to spend a lot of time finding where you left off your reading.
Intesting, the list of your posts on your homepage usings the term Last Activity were as Your Discussions uses the term Last Post. The terminalogy should be the same & should act the same. For the existing capability of going the the last post, I was thinking of Goto Last Post.

Performance issue when moving from 4.6c to 6.0

Looks like we took a performance hit when moving from 4.6c to 6.0 on the same hardware.
For example, our PGI on outbound deliveries now takes several seconds longer in 6.0 then it did in 4.6c. We've noticed other SAP area's are taking longer as well. With an ST05 sql trace on the PGI in 6.0, we see more tables being accessed, same tables being access differently taking longer. All leading to more time to do a PGI in 6.0.
Has anyone else noticed this increase in Response time when upgrading to 6.0 ?
Thanks,
David

Hello.
Yes, in our system we noticed the same thing at start. The general performance seemed to get worse after upgrading. In fact, database became bigger and more memory is consumed. However, it was tuned up by our system administrator and now seems ok.
Run the optimizer statistics and see if it get's better.
Regards.
Valter Oliveira.

I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

What should I do to setup a new MacBook pro for first time when moving from a PC?

What should I do to setup a new MacBook pro for first time when moving from a PC?

you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
http://support.apple.com/kb/HT4796

Can you keep your playlist when moving from computer running xp to computer running vista. v

can you keep your playlist when moving from computer running xp to computer running vista as i keep losing my playlists when using computer with vista running on it.ipod touch 3rd gen set up originally on computer running xp.thanks.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

When moving from one master block to detail block it must save record.

when moving from master block to detail block it must save record or it will give message like 'save changes '....
when i write it ,but this message will be coming.
But if i save record message will appear two times.
plz Help me.
Thanks & Regards
Venkata.
Message was edited by:
venkata

Hi,
you could ask for Form_Success when moving to detail_block (in wehn-new-block-instance i.e.) and if not form_success you could show an alert to ask for commit changes...
Jose.

Iphone5 - lost my contacts when moving from BT Yahoo to BT Mail. I do not back up to iCloud and I did not use my mail account for contacts. Can anyone help to find and restore my contacts?

IPhone5. I have lost my contacts when moving from BT Yahoo to BT Mail. I do not backup to iCloud and do not use my mail account to store contacts. Can anyone help find the contacts on my phone and restore them?

Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
Have you failed to use the device as designed?

Flex app doesn't work when moved from original location

I'm trying to make an image gallery in flex. It works when I run it in Flex Builder perfectly fine. The html and swf files from the bin-debug folder work perfectly fine when opened in any browser also, but ONLY when those files and all related files are opened from the default location that the application was built in. When I export a build to a different folder, the swf loads but none of the information from the xml file displays. I tried setting all of the paths of the reference files (namely the xml) in the flex app to the exact absolute location on the server, and it still didn't work when I uploaded it to the server.
I've tried several approaches starting from scratch and they have all come up with the same issue. I'm working with an educational license for Flex Builder, I'm not sure if they jip you on those and ruin the compiled swf.
Please help! I'm losing my mind over this.I think it has to do with something else besides the code since it works fine when I hit "Run", but if anyone thinks it will help to post the code let me know.

when you build an application using one of the wizards (like coldfusion flex application wizard) it hard codes
paths to cold fusion CFC's, and sometimes gets it wrong.
If your application references cfc's (or other remote objects) then it may be necessary to adjust the flex code
when moving the code into a different base folder.
For example in my own application, the url is http://localhost/crm_dev_flex and the built application gets put into
c:\inetpub\wwwroot\crm_dev_flex\bin-debug
References in the code to components found in c:\inetpub\wwwroot\crm_dev_flex\bin-debug\components\cfgenerated
(in the flex code these looks like crm_dev_flex.bin-debug.components.cfgenerated.<mycomponent> )
These need to change when you move the code to somewhere else.
Also, if you are using wizard generated cfc's then these also contain similar references that need to be changed.
IHTH.
Cheers

ML Automatically sorts files by name when moving from one folder to another.

Hello, i usually used to move a bunch of files like images or mp3s from one folder to another and in Lion, when moving like 20+ files to another folder, they was being placed where you clicked.
Seems that in ML when i move the same amount of same files, rather than placing them at the cursor, it just moves them and sorts by name. How to avoid this?

Anonymous User,
Links just request pages. Maybe the requested page could run the procedure in a before/after header process.
Scott
P.S. If you like, you can show your name in this forum instead of a numeric ID not only by signing your posts, but also by clicking on 'Forum Settings' and setting 'Name visible to others' to Yes. Unsigned, anonymous posts do not always elicit the most thoughtful or immediate responses from volunteer contributors to the forum.

Remove copy from server 'when moved from inbox' option for POP accounts

Is this option supposed to work in all cases? (or could it be buggy?:-)
I can't get it to work with my POP account: messages are still left on the POP server, even after when they are moved from the inbox to another local mailbox on my Mac...
Manual selective removal of messages from the server does work (thru the 'Get info' window of the 'Gear' menu at bottom of Mailboxes pane), so this does seem to be a problem with the POP server.
Or do I by any chance misinterpret the meaning of this option?
PowerBook G4 Mac OS X (10.4.7) Mail version 2.1 (752/752.2)

You've interpreted correctly how it should work, as long as you take the following considerations into account:
1. Messages aren't supposed to be removed from the server immediately, but rather the next time Mail connects to the POP server.
2. It may have no effect on messages that had already been downloaded prior to you choosing that option.
And, yes, it sometimes doesn't work as expected. It could be buggy or Mail might have problems communicating with the server.

Reports with prompting stop working when moved from Crystal10 to crystal 11

Issue:
We are having trouble with Crystal Reports XI. It appears that the Crystal 10 runtime included the ability to process reports that used prompting. If we run the same report with the Crystal XI runtime, it fails.
I can send a sample of the report.
Error Dialog:
Title: Internet Explorer Script Error
Error Details:
An error has occurred in the script on this page
Line: 1
Char: 1
Error: invalid character
Code: 0
URL: file: /// C:/Program%20Files/Business%20Objects/3.0/crystalreportsviewers11/prompting/js/promptengine_strings_en.js
Do you want to continue running scripts on this page?
Yes/No
Our Configuration:
We use Merge Modules that install Crystal Reports through the browser via a CAB file that we created. It runs a setup executable
The setup executable project that installs CR XI uses the following Merge Modules:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of your hot fixes)
Observation:
When the install is finished, the folder structure under u2026. Crystalviewers11/prompting do not have any files like they do if we install the development environment.
Question:
What do we need to do to correct this situation?
*why the reports with*
*prompting stops working when it is moved from a Crystal 10 to Crystal 11*
*environment. I believe that it has something to do with Merge Modules*
*because the files under the prompting folder do not populate with the*
*merge module like they do with the full install of Crystal Reports.*
Please help.
Best Regards,
Peter Freeman
Edited by: Vivek Kumar Sharma on May 19, 2009 3:43 PM

We have JDK 1.6 installed. The License Merge Module is not related to
this issue.
The files under \Program Files\Common Files\Business
Objects\3.0\crystalreportviewers11\prompting are not being installed.
If we copy files, into this folder structure the reports work.
One of the Business Object's Merge Modules should install the files
there rather than just an empty folder structure.
I got was able to figure out how to enter a customer support message.
They said that they could not support us because we were not on CRXIR2
(Crystal Reports 11 Release 2).
I found a download for CRXIR2SP4 (same thing service pack 4).
I installed it the Merge Module names changed to include a "_5"
Was:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of
your hot fixes)
Now:
CrystalReports11_5_RDC_Reportengine.msm
CrystalReports11_5_RDC_Runtime.msm
CrystalReports11_5_RDC_License.msm (should have been included)
*CrystalReports11_HotFix_Merge.msm (not needed anymore)
I will try to put a installer together with these. If this work there
will be some complexity around uninstalling the old one and installing
the new one.

UTF issue when moving from cf5 to cfmx7

It's been long overdue so am moving from CF5 to cfmx7 on my hosting account.
The issue is that my hosting account has disabled cfcontent.
I am getting gibberish outputting utf data from my database. It works fine on cf5 but on cfmx7 I read someplace that you have to use cfcontent to output utf-8 correctly.
Is there any work around without having to use cfcontent?
I tried using cfprocessingdirective and cfheader tags to show utf but it didn't work. Any pointers or suggestions appreciated.
Best Regards
Sanman

ok, since it's "N" you should be good to go with transferring the data (it's
actually pretty simple). in cf5, write a page that does a simple query against
the table(s) containing your data, i guess just select TOP 100 or so rows with
the PK & the nText columns. simply output that query using a delimiter that you
can parse easily (commas between columns & quotes for the nText would be my
default choices). have a look at the output to make sure it's readable. if all's
well, on the cf7 (or whatever) box do a cfhttp call to that cf5 page & dump out
the cfhttp.fileContent or result if you use that. if it's still readable, then
you can do the real xfer by:
- backing up the original table
- double checking that the backup is ok
- triple checking that the backup is ok
- adding another table w/just PK & nText columns
- filling that with the properly encoded data
- then do a join UPDATE against the old table

ITunes Match account when moving from France to USA.

Hi guys,
I'm moving from France to California for work in a few month. I have a french iTunes account / iTunes Match account.
I was wondering how to transfert them as a US account (for iTunes account I'm pretty sure it's easy, but I don't really know for iTunes Match Account).
Thanks for you help and Hayppy New year

You cannot transfer iTunes Store accounts across stores. If you will wish to use the US store you will have to switch over completely and start using that store. iTunes Match will have to be canceled and re-subscribed if you switch stores. See this User Tip for more information: How to Change Country with iTunes Match

NotSerializableException exception (when moving from 7.0 to 8.1 SP3)

When migrating from WL 7.0 to WL8.1SP3, I get the following exception
weblogic.utils.AssertionError: ***** ASSERTION FAILED ***** - with nested exception:
[java.io.NotSerializableException: com.test.ClientContext$ClientAccount]
at weblogic.rmi.internal.CBVWrapper.copy(CBVWrapper.java:55)
at com.test.lookup.BClient_dykqq8_EOImpl_CBV.getActiveClients(Unknown Source)
at com.test.gui.ClientHandler.getAllClients(ClientHandler.java:86)
I don't get this error if I add <enable-call-byreference> to True in my WL8.1 weblogic-ejb-jar.xml file.
I never had this tag <enable-call-byreference> in my original WL8.1 weblogic-ejb-jar.xml file.

The default for call-by-reference was true before 8.1. You'll have to explicitly set it to true in 8.1 and later.
-- Rob

Image Placement when moving from all images to Quick collection

Similar Messages

Maybe you are looking for