Image pop-up button

I am trying to create a text button where an image pops up when it is selected. The image needs to pop up next to the text button, not replace it. Any suggestions?
PowerMac7,3 Mac OS X (10.2.x)

This comes up all the time, Layered Menus work, but can be unrelaible. These threads (and others) discuss this
http://discussions.apple.com/message.jspa?messageID=3102055#3102055
http://discussions.apple.com/thread.jspa?messageID=2951183&#2951183
For layered menus check out this
http://www.dvdstepbystep.com/layersover.php

Similar Messages

Vertical column pop-up button-"OPEN"-with left " " appears-bottom right corner Firefox screen-Independent of web-site visited-Am "secured" against virus-Have not touched button: "Danger, Will Robinson." Appreciate any help. Thnx. DanDeren

Occasionally and sporadically - I cannot reproduce this issue - a small vertical column-ed pop-up button appears in the lower right corner of my (Firefox) browser screen. It is not clear what causes this - I thought perhaps that it had something to do with Google's new gmail format which I have, so far refused to adopt, although when it forces me to do so, I Accept and then re-configure back to the old look. I don't think the problem is with gmail, though since tonight I was accessing the New York Time subscription web-site. However, tonight - 31JAN2012 - this button popped up, stuck around for maybe 30 seconds and then went away. It is small - about a quarter inch wide; perhaps one-half to three quarters of an inch tall. It displays on the top of the button the "<" followed underneath by the word "OPEN" (displayed vertically). I know better than to push an OPEN button whose function is absolutely opaque to me - fool me once... My desktop has the latest version of Firefox - 9.0.1 and I just loaded the latest update. I am running Windows XP Version 5.1 (Build 2600.xpsp_sp3_gdr.111025-1629 : Service Pack 3). Further info re. operating system: Microsoft Windows XP Home Edition Service Pack 3 - that was probably pretty clear from the Version and Build info above. Hardware: ACER-42041E6643 - ACPI Multiprocessor PC - Chip/Processor: Intel Atom CPU 230 @ 1.60 GHz (2 of these). I can provide more system and configuration information, as necessary. As it is, I go to System Info and it will not let me copy all of the system info above - I had to copy it brute-force manually. I have managed tech support organizations in the past. The first question you ask the user is: "What changed?" or perhaps "What did you change?" Like every other user with an issue, my response is: Nothing of which I am aware. I certainly am not going to push this button - perhaps it toggles between something and something else - more than like so - or it opens "something" - I will not find out what since I refuse to push it. I am guessing this is some benign "feature" of which I am unaware. Any assistance with this will be greatly appreciated. Thanks and best, Dan Deren.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

Bad Image pop up

Does anyone know how to fix the
AcroRd32.exe - Bad Image pop up window?
This is what the whole message says:
C:\\Windows\PCTBDCore.dll is either not designed to run on Windows or it contains error.
Try installing the program again, using the original installation media or contact your system
administrator or the software vendor for support.
This window pops up every time I open a PDF or open adobe alone. After several clicks of the ok button
it goes away and operates as suppose to.
I have uninstalled and redownloaded adobe twice now.
Can someone point me in the right direction?

If this is a video driver issue.
How do I fix this? I am not sure where I have to go.
My computer is only 8 months old, so I pretty much have the newest bells and whisltes.
Which confuses me on how to fix this.
In advance-Thank you for your help!

How to use same actions for differ pop-up buttons

Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethi

Hi ,
u can use the method SUBSCRIBE_TO_BUTTON_EVENT of the IF_WD_WINDOW interface ... to handle the event fired by the popup .....used this method after creating the popup window ...
regards
Yash

Pop-up button issue: Mac vs PC

Hello-
I'm creating an interactive form for my company and having an issue when the pdf is used on a PC.
Here's the run down:
First off, this is my first attempt at creating an interactive pdf so please forgive any incompetence on my part. 90% of the form was created in InDesign and the rest finished in Acrobat on a Mac.
The form itself has many roll-over and pop-up features so that definitions or additional information can be accessed by hovering the cursor over particular fields. I have gone over the tab order in detail and am certain that all pop-up buttons have been set up so that they do not interfere with any text fields.
Here is the form when first opened:
And here is how the roll-over function works (without issue on my Mac):
Note that the trigger in this case is also a text field where the project name is typed.
Now, when the pdf is opened on a PC (using Acrobat Pro 9 on a Windows 7 machine) this is what happens:
The text that appears in the pop-up button then appears in the following "submitted by" text field and will not go away—it cannot be selected, deleted or otherwise modified.
I have tested this form extensively on my Mac and have not had any issues. Any suggestions or ideas as to why this would be a problem when the same pdf is opened on a PC?
Any help would be greatly appreciated!
Trevor

Hello-
I'm creating an interactive form for my company and having an issue when the pdf is used on a PC.
Here's the run down:
First off, this is my first attempt at creating an interactive pdf so please forgive any incompetence on my part. 90% of the form was created in InDesign and the rest finished in Acrobat on a Mac.
The form itself has many roll-over and pop-up features so that definitions or additional information can be accessed by hovering the cursor over particular fields. I have gone over the tab order in detail and am certain that all pop-up buttons have been set up so that they do not interfere with any text fields.
Here is the form when first opened:
And here is how the roll-over function works (without issue on my Mac):
Note that the trigger in this case is also a text field where the project name is typed.
Now, when the pdf is opened on a PC (using Acrobat Pro 9 on a Windows 7 machine) this is what happens:
The text that appears in the pop-up button then appears in the following "submitted by" text field and will not go away—it cannot be selected, deleted or otherwise modified.
I have tested this form extensively on my Mac and have not had any issues. Any suggestions or ideas as to why this would be a problem when the same pdf is opened on a PC?
Any help would be greatly appreciated!
Trevor

Can't get rid of background image of toolbar buttons

I am just a front-end developer and responsible for the front-end look of an ADF application that we are creating: We are using jDeveloper 11.1.1.4.0 (and we cannot upgrade due to being told no...so I cannot USE the skin editor which when I tried to use, migrates the files).
I have created the necessary directories and files per tutorials I have been reading up on...
skins directory - (new directory)
skin.css (new file)
Web-Inf -
trinidad-skins.xml (new file and correctly configured)
trinidad-config.xml (existing file but updated to use the new skin)
Within the trinidad-skins.xml file I have the the new skin specified and is extending the "fusionFx-v1.desktop" default theme being used.
Now the problem... I cannot get the background images to be overwritten or disabled for af|toolbar::item within the .css file
I have looked up information about how to overwrite this and I tried to use the
-tr-inhibit: background-image; within the .css declaration like this
<code>
af|toolbar::item {
-tr-inhibit: background-image;
</code>
That was unsuccessful. I even just tried standard background {none;} and that was a no go as wel.
What am I doing wrong here? This is driving me nuts... they made this skinning stuff way too complicated IMO. I don't see why I can't just add a class to the component within the property inspector of that component and then be able to reference it via normal css conventions... but nope BREAKS grrr... And I'm advanced level CSS coder! This stuff has me absolutely clueless and ready to just quit!
Any suggestions or help is appreciated! And again... I cannot use the skin editor! Everytime I tried to, it prompted me to migrate the application and I cannot do this since there are about 5 other developers working on this application (we use clearcase for version control).
Thanks,
Michael

I can't use the stand alone skin editor since it will want me to migrate the project files (developed in 11.1.1.4) and all files are source controlled via ClearCase.
I have been experimenting...This is the code on the .jspx page
<code>
<af:panelGroupLayout id="header" styleClass="headerParent">
<af:panelGroupLayout id="topLinkBar" layout="horizontal" styleClass="topLinkBar AFStretchWidth">
<af:outputLabel value="#{customeradminportalviewcontrollerBundle.CUSTOMER_ACCOUNT}" styleClass="customerLabel"/>
<af:outputText value="outputText2012" styleClass="customerOutput"/>
<af:toolbox id="topLinkToolBox" styleClass="topLinkToolBox">
<af:toolbar id="topLinkToolBar" styleClass="topLinkToolBar">
<af:commandToolbarButton text="#{customeradminportalviewcontrollerBundle.HELP}" id="ctb2"/>
<af:commandToolbarButton text="#{customeradminportalviewcontrollerBundle.POWER_INVOICE}" id="ctb1"/>
<af:commandToolbarButton text="#{customeradminportalviewcontrollerBundle.CONTRACT}" id="ctb3"/>
<af:commandToolbarButton text="#{customeradminportalviewcontrollerBundle.SIGNOUT}" id="ctb4"/>
</af:toolbar>
</af:toolbox>
</af:panelGroupLayout>
</af:panelGroupLayout>
</code>
Here is the CSS code
<code>
#topLinkToolBar af|commandToolbarButton {
background-image: none;
background-color: transparent;
border: 0;
</code>
That WILL NOT get rid of the background images on the buttons! However if I do the !important hack within the CSS like this:
<code>
#topLinkToolBar af|commandToolbarButton {
background-image: none!important;
background-color: transparent!important;
border: 0!important;
</code>
Then BOOM it works... I do NOT want to use the !important hack since that will cause problems in CSS inheritance and cascading...
What am I doing wrong?
Also how do I (if possible) target a specific ID used? For example the af:toolbar has an ID of "topLinkToolBar" how can I target that within the CSS? I know I can target it via class attribute like this:
<code>
af:toolbar.topLinkToolBar
</code>
but how would I do the same if I wanted to only apply to a component with a particular ID?
Thank you everyone for all your patience, suggestions and help with this... I'm totally new to this type of environment and it's been a slow and frustrating learning experience!
Michael

How to link an image to a button in Flash Builder 4

I am new to Flash Builder 4 and have trouble to link an image to a button in Flash Builder 4.
For example, I want an image of a round green button to replace the default retangle button in Flash Builder 4.
Can anyone help me up?
Thanks

You could also use the mx:Image control and just add a click event handler:
function(){return A.apply(null,[this].concat($A(arguments)))}
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/mx"
        width="500" height="400">
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            protected function image1_clickHandler(evt:MouseEvent):void {
                Alert.show("You clicked the image");
        ]]>
    </fx:Script>
    <mx:Image source="http://helpexamples.com/flash/images/image1.jpg"
            click="image1_clickHandler(event);" />
</s:Application>

Anchored images outside of button frame

Hi Experts
I am trying to find a way of getting an image to become visible on rollover on a button I've created, without having the image positioned within the button frame. The images are large & I have several small buttons on the page, each linked to text frames with anchored text objects (the images.) Anchoring the images outside the text frame is no problem, but visibility is limited to the button frame.How do I link large images to small buttons that only activate on rollover? Any ideas? PLEASE help!

Convert that image you want to appear to separate button, and attach show/hide buttons action to your real button. Use rollover as trigger for showing your image, and rollout for hiding it again....

t:inputcalendar i want an image instead of button?

Hi
i am using tomhawak inputdate and inputcalendar in my appliation. i want to use an image insated of button.
Please some one let me know how can we do that
thansk in advnace
sreedevi.

Hi,
i have tried the following tag image is displaying on the button.
<t:inputCalendar id="dtTo" value="#{selectPlan.timeFrame.endingDate}" renderAsPopup="true" size="14" popupDateFormat="yyyy Week w" readonly="true" required="true" onclick="validateTimeFrameDate()" renderPopupButtonAsImage="true" popupButtonImageUrl="images/calendar.gif" />
Thanks,
N.Kishore

Is there a way to add images , text and button in the individual marquee of a carousel

Is there a way to add images , text and button in the individual marquee of a carousel ?

Write a custom carousel. Usually carousel components are just ULs that use something like jQuery to rotate through the LIs. The foundation carousel component is really just designed for some specific use cases. Generally I would just recommend rolling your own.

Change Image of a Button

Hey,
I'm searching for the command for changing the image of a button, after that is clicked. (iPhone OS)
I added an outlet to my app:
IBOutlet UIButton *myOutlet1;
But I don't know how to change the picture after the click!
Can someone please give me the code to do that?
I'm new to iPhone development.
THANK YOU VERY MUCH!!!

Here is an example of how you might set up a button to handle all four states. This assumes that the images are in your bundle (in Xcode, you have added them to the project in the "Resources" section).
[myOutlet1 setImage:[UIImage imageNamed:@"DOA_NORMAL.jpg"] forState:UIControlStateNormal];
[myOutlet1 setImage:[UIImage imageNamed:@"DOA_HIGHLIGHTED.jpg"] forState:UIControlStateHighlighted];
[myOutlet1 setImage:[UIImage imageNamed:@"DOA_DISABLED.jpg"] forState:UIControlStateDisabled];
[myOutlet1 setImage:[UIImage imageNamed:@"DOA_SELECTED.jpg"] forState:UIControlStateSelected];

How to change an image only when button is pressed

is there an easy way to make the image in a uiimageview change to a different image while a button is being pressed? then, once the user stops pressing the button, the image view needs to return to the first image.
thanks in advance!

Hey , U can handle that with Touches ,
But in a simply way
Use Touchupinside to show the pressed image ,
and use Touchupouside to show the normal image.
This may give you the same impression.
Thanks
Srikanth

Is possible to add a image in a button?

I know it can assign a icon for <mx:Button ...>
my button is created programly:
var but:Button = new Button();
but.width=20;
but.addEventListener("click",indent);
myRTE.toolbar.addChild(but);
I want to assign a image on this button. Who has idea how to
do it?

try this:
[code]
<mx:Button styleName="myButton" label=""/>
<mx:Style>
.myButton
upSkin: Embed(source="../forum.gif");
overSkin: Embed(source="../forum.gif");
downSkin: Embed(source="../forum.gif");
disabledSkin: Embed(source="../forum.gif");
[/code]

Safari Pop up buttons / javascript

I want to be able to select a specific item in a list of a pop up button in safari, i can do it by using a repeat statement and get value of button, with key codes simulating down arrow. This is tediously slow to the say the least. When i go view source of the page there is an identifier for the option i want, option value="f724". Is there a way to set the value of the pop up button to this number, i cant seem to do it. I was reading around the forum and found some mentions of the term do javascript but i have no idea how to implement it in this case, or if it at least possible.

My search_replace(x, y, z) subroutine was a very basic attempt at encoding the URL properly. As it happens omitting the handler entirely and just setting keyword to text returned of result works the same in this case. The spaces get replaced with %20 by default, and the Discussions search app doesn't seem to mind.
This style of search & replace is known as a "text item delimiters" or TIDs for short. You may have heard of a tab-delimited file. These contain cells of information separated by tabs. In the case of AppleScript's text item delimiter, we can set it to tab or any other character, and then ask for a string's "text items" provided in list form. So the steps taken by the handler in pseudo code are:
1. Pass the text returned of the display dialog command to the search_replace handler, along with the search string "space" and the replace string "+"
result: {"yellow fever", space, "+"}
2. save whatever the current value of text item delimiters is
This is to avoid potential conflicts with other code that may be using the delimiters property.
result: {"[… anything]", ""}
3. change the value of text item delimiters to space
By defining " " (space) as a delimiter, we are effectively stripping every occurrence of the space character out of our string. This is because it can now be seen as a special delimiter character, as opposed to a literal one.
4. get the text items of our string as a list
result: {"yellow", "fever"}
5. change the value of text item delimiters to the + symbol
While our text string is a list, we are going to be sneaky and change the delimiter property from space to plus sign, like the one found in our original URL at Apple Discussions.
6. coerce the list of text items back to a string
When AppleScript coerces a list into a string, it automatically inserts the delimiter character you have defined in between each item.
result: "yellow+fever"
7. set the delimiter back to the way we found it in step 2
The way I've written all this in actual code is highly abbreviated. To help read it easier remember that I'm addressing a reference to the delimiters, so every time you see the word "contents," that is referring to the text item delimiters. Also note that
set {a, b} to {"a", "b"}
is the same thing as
set a to "a"
set b to "b"
The only difference is that the former is written in one line, and the latter is written on two lines.

Actions menu wheel image and Go button image

Hello ,
In APEX 4 Interactive Reports, the actions menu wheel image and the go button are coming as html buttons instead of the wheel image and go button image.
Is there a way I can rever to the old wheel img and go button .
Thanks,
Dippy

Within the IR, under Search Bar, you can set Actions Menu Image to '/i/ws/action_32x24.gif' - this is the green wheel but does not have little arrow. I will contact our image guru and see if the old one is sitting somewhere. As for 'Go', this does not support an image but you can change the word if you need to (using Search Button Label) and set a button template to match your application.
-- Sharon

Image pop-up button

Similar Messages

Maybe you are looking for