Image Preservation during Conversion to WORD

When converting a PDF to a WORD document the text portion is converted fine.  However, the images such as notary stamps or other objects that are not word text are not recognized.  How do I preserve the images in the conversion?

What's happening to your images?  Could you try disabling the 'Recognize Text' option and converting your document again?
Let us know how it goes!
-David

Similar Messages

  • How do you keep embedded documents during conversion from Word 2007 to PDF?

    Windows 7, with all available patches.
    Word 2007, with all available patches.
    Acrobat reader 9.3.2
    I have additional documents, spreadsheets etc embedded into a Microsoft Office Word document. When this document is converted to the PDF (using the Word PDF add-in interface) the embedded objects can no longer be opened and only appear as images. 
    Is there a way to retain the embedded document during the conversion so that they can be opened from within the resulting PDF?
    Thanks in advance!

    Thanks very much for your repsonse, it's much appreciated
    I don't have Acrobat X installed at this time so am not able to create or edit PDFs (other than from Word).  I understand that creating a PDF from Word may not be an Acobat issue per se, but thought that someone on this forum may have experienced a similar problem, hence thought I'd try my luck here
    I will do as you suggest and try an MS forum
    Thanks again

  • Conversion from word problems with images

    Hi ,
    I managed to make a conversion table to structure the documents of out company.I am having a proble with images.I am importing the word file to our template with a custom EDD document.When the import finishes I am having all images at almost correct places.The issue is when i apply the custom conversion table all the images at anchored at insertion point.The correct position would be at below current line.I am stuck and I can not find a solution to this.
    My EDD is as follows:
    EDD Version is 12.0
    Structured Application: ReportPlain
    F:\FramemakerBooks\Part B -Section 3.fm
    April 14, 2014
    Element (Container): Author
    General rule:          <TEXT>
    Text format rules
    In all contexts.
    Use paragraph format: ReportAuthor
    Element (Container): Emphasis
    General rule:          <TEXTONLY>
    Text format rules
    In all contexts.
    Text range.
    Use character format: Emphasis
    Element (Equation): Equation
    Element (Container): EquationPara
    General rule:          Equation
    Text format rules
    Element paragraph format: Equation
    Element (Container): Extract
    General rule:          (<TEXT> | Emphasis | Term | Superscript | Subscript | XRef)*
    Attribute list
    Name: ID           Unique ID           Optional
    Text format rules
    In all contexts.
    Use paragraph format: Extract
    Element (Container): Figure
    General rule:          (<TEXT> | Frame)*
    Attribute list
    Name: ID           Unique ID           Optional
    Name: XRefLabel           String           Optional
    Default:          Figure
    Name: Imported           Choice           Optional
    Choices:          Yes, No
    Default:          No
    Text format rules
    In all contexts.
    Use paragraph format: Figure
    Element (Footnote): Footnote
    General rule:          <TEXT>
    Text format rules
    In all contexts.
    Use paragraph format: Footnote
    If context is: * < Table
    Use paragraph format: TableFootnote
    Element (Graphic): GRAPHIC
    Initial graphic element format
    In all contexts.
    Insert anchored frame.
    Anchored Frame Object Style:FiguredCentered
    Element (Graphic): Frame
    Initial graphic element format
    If context is: Figure[Imported = "Yes"]
    Insert imported graphic file.
    Else
    Insert anchored frame.
    Element (Container): Head
    General rule:          <TEXT>
    Text format rules
    Count ancestors named:          Section
    If level is: 1
    Context label: H1
    Use paragraph format: Heading1
    Else, if level is: 2
    Context label: H2
    Use paragraph format: Heading2
    Else, if level is: 3
    Context label: H3
    Use paragraph format: Heading3
    Else, if level is: 4
    Context label: H4
    Use paragraph format: Heading4
    Else, if level is: 5
    Context label: H5
    Use paragraph format: HeadingRunIn
    Else
    Numbering properties
    Autonumber format:
    If context is: {first} < Report
    Use paragraph format: ReportTitle
    Else, if context is: HeadingRunIn
    Use paragraph format: HeadingRunIn
    Element (Container): HeadingRunIn
    General rule:          Head, Para+
    Element (Container): Item
    General rule:          (<TEXT> | Emphasis | Term | Superscript | Subscript | XRef | Para)*
    Format rules for first paragraph in element
    If context is: List[Type = "Plain"]
    No additional formatting.
    Else, if context is: List[Type = "Bulleted"]
    Use paragraph format: Bulleted clean
    Else, if context is: {first}
    Use paragraph format: Numbered1
    Else
    Use paragraph format: Numbered
    Element (Container): List
    General rule:          Item+
    Attribute list
    Name: ID           Unique ID           Optional
    Name: Type           Choice           Optional
    Choices:          Plain, Bulleted, Numbered
    Default:          Bulleted
    Automatic insertions
    Automatically insert child:          Item
    Element (Container): Para
    General rule:          (<TEXT> | Emphasis | Term | Superscript | Subscript | XRef | Footnote | Table )*
    Attribute list
    Name: ID           Unique ID           Optional
    Text format rules
    If context is: {after Head }
    Use paragraph format: Body
    Else, if context is: {after List}
    Use paragraph format: BodyAfterHead
    Else
    Use paragraph format: Body
    Element (Container): Part
    Valid as the highest-level element.
    General rule:          (Para | Footnote | Table | Section )*
    Attribute list
    Name: ID           Unique ID           Optional
    Control flags: Read-only
    Automatic insertions
    Automatically insert child:          Head
    Text format rules
    Element paragraph format: Body
    Element (Container): Purpose
    General rule:          <TEXT>
    Text format rules
    Element paragraph format: ReportPurpose
    Element (Container): Section
    General rule:          (Section,Head |Section | Para | List  | Table | Figure  | HeadingRunIn )*
    Attribute list
    Name: ID           Unique ID           Optional
    Name: XRefLabel           String           Optional
    Default:          Section
    Automatic insertions
    Automatically insert child:          Head
    Element (Container): Subscript
    General rule:          <TEXTONLY>
    Text format rules
    In all contexts.
    Text range.
    Font properties
    Superscript/Subscript: Subscript
    Element (Container): Superscript
    General rule:          <TEXTONLY>
    Text format rules
    In all contexts.
    Text range.
    Font properties
    Superscript/Subscript: Superscript
    Element (Table): Table
    General rule:          TableTitle?, TableHead?, TableBody
    Attribute list
    Name: ID           Unique ID           Optional
    Control flags: Read-only
    Name: XRefLabel           String           Optional
    Default:          Table
    Control flags: Read-only
    Initial table format
    In all contexts.
    Table format: Format A
    Element (Table Body): TableBody
    General rule:          TableRow+
    Element (Table Cell): TableCell
    General rule:          (<TEXT> | Emphasis | Term | Superscript | Subscript | XRef | Frame| Para)*
    Text format rules
    Element paragraph format: Bodycell
    Element (Table Heading): TableHead
    General rule:          TableHeadRow+
    Element (Table Cell): TableHeadCell
    General rule:          <TEXT>
    Element (Table Row): TableHeadRow
    General rule:          TableHeadCell+
    Element (Table Row): TableRow
    General rule:          TableCell+
    Element (Table Title): TableTitle
    General rule:          <TEXT>
    Text format rules
    Element paragraph format: TableTitle
    Element (Container): Term
    General rule:          <TEXTONLY>
    Text format rules
    In all contexts.
    Text range.
    Use character format: Emphasis
    Element (CrossReference): XRef
    Attribute list
    Name: IDRef           ID Reference           Required
    Control flags: Read-only
    Limit values for format change list properties
    First indent
    Maximum: 39.0"
    Minimum: 0.0"
    Left indent
    Maximum: 39.0"
    Minimum: 0.0"
    Right indent
    Maximum: 39.0"
    Minimum: 0.0"
    Space above
    Maximum: 32767.0 pt
    Minimum: -32767.0 pt
    Space below
    Maximum: 32767.0 pt
    Minimum: -32767.0 pt
    Line spacing
    Maximum: 32767.0 pt
    Minimum: -32767.0 pt
    Tab stop position
    Maximum: 39.0"
    Minimum: 0.0"
    Font size
    Maximum: 400.0 pt
    Minimum: 2.0 pt
    Spread
    Maximum: 1000.0%
    Minimum: -1000.0%
    Stretch
    Maximum: 1000.0%
    Minimum: 10.0%
    Cell margins
    Top
    Maximum: 32767.0 pt
    Minimum: 0.0 pt
    Bottom
    Maximum: 32767.0 pt
    Minimum: 0.0 pt
    Left
    Maximum: 32767.0 pt
    Minimum: 0.0 pt
    Right
    Maximum: 32767.0 pt
    Minimum: 0.0 pt
    And my conversion table is:
    Wrap this object or objects          In this element          With this qualifier
    TC:          TableCell
    P:Body          Para
    P:Normal          Para
    P:Heading 5          Head          head5
    E:Head[head5],(Para | Frame | List | Table )*          Section          section5
    P:Heading 4          Head          head4
    E:Head[head4],(Para | Frame | List | Table |  [section5])*          Section          section4
    P:Heading 3          Head          head3
    Head[head3],(Para | List | Frame | Table | [section4])*          Section          section3
    P:Heading 2          Head          head2
    Head[head2],(Para | List | Frame | Table | [section3])*          Section          section2
    P:Heading 1          Head          head1
    Head[head1],(Para | List | Frame | Table | [section2])*          Section          section
    T:Table          Table (promote)
    TT:          TableTitle
    TH:          TableHead
    TB:          TableBody
    TF:          FOOTING
    TR:          TableRow
    RE:RootElement          Part
    P:List Paragraph          Item
    Item+          List
    G:          GRAPHIC(promote)
    RE:RootElement          Part
    I am almost done with the template"Application"I just need to place the pictures in the correct position.Can anyone point me to the right direction?
    Thanks a lot in advance

    Dimitris,
        I know you originally posted this question on the general FrameMaker forum. I suggest below that you post a follow-up question there.
       The structure-based part of the issue is that neither a conversion table nor an EDD can change properties of an existing anchored frame. It seems that when you open your Word document in FrameMaker, the graphics come in positioned at the insertion point. That doesn't change when you apply the conversion table. Your EDD does specify object style FiguredCentered as the initial format for GRAPHIC elements. The keyword here is "initial". The EDD can indicate a style for new anchored frames that are created by inserting an element. It does not allow you to change existing anchored frames.
      So the real problem is how to make a global change to all existing anchored frames (either assigning an object style or changing the position to Below Current Line) so that you don't have to change them one at a time. I am not aware of a way to do so with existing FrameMaker commands. You could use a script or plug-in, or save the document as MIF and make a global change with a text editor in the MIF file. You might ask on the general FrameMaker forum if someone there knows an easier approach.
           --Lynne

  • Missing Few fields during Conversion

    Hello SAP GURUS,
    I have mapped each and every single field from the legacy system to SAP. Now, we are doing the conversion. And the conversion team have few questions such as, in table xxxx the field is missing xxxx. For example, they say Asset Class field is missing in xxxx table and field when they try to upload. How can they mapp Asset class table and field? I don't think it is required during conversion.  Because they are using the transaction t-code AS91. Asset Class is a mandatory field right......Once the asset is created it has to be there.....
    Also same thing with Depreciation Areas. They say the value is missing for area 02, 03, 11 etc..... I don't think they have to upload the depreciation areas because it would be created in configuration.
    Your input is highly valuable.
    Thanks,
    Mohid

    Hi,
    Firstly for uploading r u using BDC or LSMW, when u upload the data u have to give all the data for asset creation. U can check with in foreground mode. It will shows the error.
    When we upload the data system will check all the fields and values in your excel/text file. for example Asset class, without asset class system will not create asset. please check your file.
    for depreciation areas is it warning mesage or error message, if it is warning there is no problem in your asset creation.
    points assign
    regards,
    Gopi.P

  • Received HTTP response code 500 : Error during conversion of XI message

    hi
    Facing the error , "Received HTTP response code 500 : Error during conversion of XI message"
    This is the fist time i am configuring the sender soap ( Axis Framework in the SOAP Adapter) (Quality of service Best effort) communication channel and i am getting the above error did any body face this error.
    01.09.2011 12:02:32     Information     The message status was set to DLNG.
    01.09.2011 12:02:32     Error     SOAPFault received from Integration Server. ErrorCode/Category: XIServer/ATTRIBUTE_INITIAL; Params: Manifest cid:6D90482BF678436D75928FC8B9930519; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Attribute Manifest cid:6D90482BF678436D75928FC8B9930519 is initial
    01.09.2011 12:02:32     Error     Transmitting the message using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during conversion of XI message.
    regards
    sandeep
    Edited by: pendyalas on Sep 1, 2011 12:20 PM

    I found a link with respect to similar error , sap note 1522630 has been used to resolve this error.
    i will try and see if it works.
    AXIS Sender Adapter Failure after upgrade to PI 7.11 SP06
    regards
    sandeep

  • Http-Status:  500 Error during conversion of XI message

    i am getting this error, Could you please help us in resolving this
    http-Status:  500 Error during conversion of XI message
    Payload:
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    <SOAP:Header>
    </SOAP:Header>
    <SOAP:Body>
    <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during conversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSER">UNEXPECTED_VALUE</SAP:Code><SAP:P1>Main/@versionMajor</SAP:P1><SAP:P2>000</SAP:P2><SAP:P3>003</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>XML tag Main/@versionMajor has incorrect value 000; expected value is 003
    </SAP:Stack></SAP:Error></detail></SOAP:Fault>
    </SOAP:Body>
    </SOAP:Envelope>
    Thnaks, ajay

    XML tag Main/@versionMajor has incorrect value 000; expected value is 003
    as mentioned above @versionMajor is expecting 003 as the input....if it a DataType in XI then check if there is some restriction imposed on the above attribute.....if you are importing some XSD/wsdl then check if it has some restriction.......if the restriction is not needed then try removing it....so that versionMajor will accept all the values
    Regards,
    Abhishek.

  • Received return code 500 ( Error during conversion of XI message )

    Hello Experts,
    I am configuring the WSRM for SD in SAP. I have only configured services CreditWorthinessQuery_Out and CreditWorthinessQuery_In on soamanager to carry out credit checks.
    while i am creating sales order i am getting below error.
    Received return code 500 ( Error during conversion of XI message )
    In debug i checked the string of error it showed me below string :
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">#<SOAP:Hea
    der>#</SOAP:Header>#<SOAP:Body>#<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.o
    rg/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during c
    onversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30
    </faultactor><detail><SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.co
    m/xi/XI/Message/30"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSE
    R">UNEXPECTED_VALUE</SAP:Code><SAP:P1>Main/@versionMajor</SAP:P1><SAP:P2>000</SA
    P:P2><SAP:P3>003</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMess
    age namespace=""/><SAP:Stack>XML tag Main/@versionMajor has incorrect value 000;
    expected value is 003##</SAP:Stack></SAP:Error></detail></SOAP:Fault>#</SOAP:Bo
    dy>#</SOAP:Envelope>#
    Does anyone have any idea about this? I am not integrating with PI/XI system.

    Hi
    Can you check this out?
    Transaction SXMB_ADM  Integration Engine Configuration
    For an application system you have to maintain the role of the business system as an application system. Set the corresponding Integration Server as an HTTP destination (for example, dest://INTEGRATION_SERVER). Create the destination in transaction SM59 and set the type to HTTP Connections to R/3 System. Test the connection by using the Connection Test button; you should get HTTP 500 u2013 Empty HTTP Request received, because no u201Ereal‟ XML document is sent during this test.
    A HTTP return code 500 (Internal Server Error) is OK.
    Regards
    Pothana

  • File conversion to word - uploading is showing but nothing is happening

    Hi
    Iv'e just purchased the online file conversion to word, i've just logged in and the adobe reader document shows it's updloading file to Adobe Export PDF online but it's taking ages and doesnt' seem to be working.
    My boss needs this done super urgent - can you please???

    I do not know what the problem is; it's possible that there is a problem with the ExportPDF server?
    If it's super urgent, what I would do is download the free trial of Acrobat Pro, and run the conversion with Acrobat for now.
    [topic moved to ExportPDF forum]

  • How to open an image when clicking in a word.

    Im working in a demo for an interactive book for ipad using the Digital Publishing Suite > Folio Builder and i need to be able to open a specific image when clicking in a word. I havent found any tutorial that shows how to do this can somebody please point me in that right direction?  thx so much

    Download Bob Bringhurst's DPS Tips app from the app store and/or watch my lynda.com DPS Essentials Course. If you don't have a subscription you can get a free one week trial here: lynda.com library | Trial Subscription

  • I want to manage my pdf conversion to word account, but when I click on manage I get an error message saying Heading too Large.  How do I get into manage

    I want to manage my pdf conversion to word account, but when I click on manage I get an error message saying Heading too Large.  How do I get into manage

    Hi,
    May i know which service you are using?
    Would it be possible for you to send me the screenshot of the error?
    Regards,
    Florence

  • I am trying to upload a pdf file for conversion to Word but keep getting an error on your part?

    I am trying to upload a pdf file for conversion to Word but keep getting an error on your part?

    I received your Scan.pdf sent to [email protected] and had no problem to convert it via Export PDF service. Could you try again?
    Jyh-Jiun Liou

  • PSE 10.0 freezes up during conversion from 8.0

    The 10.0 freezes up during conversion of the 8.0 at precisely the 34% point. Numerous suggestions have been tried to no avail.

    Having searched for similar issues with other PSE users, it is apparent Adobe does not intend to respond - none of the numerous questions on serial numbers have received a response. I found the answer to my question, but the solution will not help anyone who can't locate their original installation disks.
    There is an apparent difference in the serial numbers that are issued on-line during product downloads and those that are printed on the box / disk sleeve. I managed to dig up the six year old install disk and initiated setup.The first pop up box requests a serial number and I entered my original number. The installation proceed without incident, other than requesting a file update which I obtained from Adobe downloads. The serial number which was rejected when downloading a copy of PSE 7.0 from Adobe works just fine in the identical disk based install.
    And, a note in passing to "Manjo Kumar:" PSE 7.0 runs just fine under Win 8.1. Please stop using the excuse that Win 8.1 is not supported and give users the real answer: "If you download a copy, you need a downloaded serial number. If you originally installed from disk, you need to re-install from disk. A disk based serial number won't work on a download copy."
    Short sighted attempt by Adobe to force users to purchase another copy of previously installed software.

  • Black screen during conversation

    Can anyone help me with this? I own an iPhone 3GS and during conversations, screen becomes totally black, so I can't reach KEYBOARD, SPEAKERS, and so on. Any suggestions, please? Thanks and best regards!!!

    Stop using foul or abusive language
    Your choice to test water proof effectiveness
    As the phone is waterproof then the speakers will loose some clarity
    The update is a small bug fix which most phones have had
    Don't have a Z3 so wait for someone else to possibly answer your queries but mind your language
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Can't reset incoming call during conversation after upgrade to IOS 5

    Right after migration to IOS 5 I discovered that it's impossible to drop incoming call during conversation. I mean when you pressed power button twice in IOS 4 call must be transferred to voice mail or resetted. It was fine before migration to 5th version pf OS. I tried to reset my phone to manufacture settings but result was the same.
    Does anyone met the same with new IOS?

    Weird, I can't edit my messages here...
    It doesn't matter once or twice the button was pressed - both calls are resetted.

  • Unsuccessful Conversion to Word

    I exported my first PDF file for conversion to Word. I downloaded the results and there was nothing but random characters and the formatting was all messed up. What next?

    Just as badly.  I contacted support and have cancelled my subscriptions.
    On Thu, Feb 21, 2013 at 4:53 PM, David Kastendick

Maybe you are looking for