Image preview not working with 3rd party photo apps in iPhoto/Image Capture

I haven't had a problem until recently with the iPhone 4. Pictures taken with third party photo apps such as Shake It Photo or Hipstamatic no longer generate a thumbnail preview in either iPhoto or Image Capture. It's just a generic jpg icon. All pictures taken with Apple's camera app appear just fine. I also had a problem where I couldn't import any of the photos, but I restarted the phone a couple times and that seemed to fix the importing issue, but not the thumbnail preview issue. This is particularly weird because i've been importing pictures since the first day this phone came out, and it's only been doing this since yesterday.
I know a lot of people are having problems getting their iPhoto to recognize the phone at all or that there are photos on the phone, but is anyone else having the same problem as me? Any solutions? I have iPhoto 8.1.2.
Thanks!
Message was edited by: Bud Inski

I have this issue but didn't recognize it until I read your post. I thought it was 2 bad photos.
I'll subscribe to this tread to see if anyone comes up with a fix.

Similar Messages

Firewire iSight not working with 3rd party software on Leopard

I just installed OSX Leopard and not able to use firewire isight on any program other than ichat. I use 3rd party software for video conferencing (educational setting) and need an external iSight so as to position the camera on larger groups. Anyone have any suggestions?

My external iSight is working fine with QuickTime Pro, iMovie, Photo Booth (v2).
If http://docs.info.apple.com/article.html?artnum=93240 does not get things working, and especially if your problem is only with your 3rd party app, contact the developer to see if there are known issues with Leopard.
Jim Destin

IPod 30GB will not work with 3rd party USB 2.0 PCI card

I've had an IOGear PCI USB 2.0 card (GIC220U-BIO) in my Sawtooth for some time now, and have been using it flawlessly with my Canon i860 printer, and Canon LiDE 30 Scanner.
Just recently I received a Video iPod (30GB) and wanted to take advantage the high speed USB bus offered on that card to sync my iPod. The problem is, when I plug in the iPod to the USB port on that card, I get the transparent gray box telling me that I need to restart my mac by pushing the reset switch, or holding the power button for several seconds (in other words, freezes).
The iPod works fine with the built-in USB ports (albeit slow), as well as the high speed port on my iBook G4. Why am I getting this error? There are no drivers or firmware updates for this PCI card available.
Is there a solution?

Yes, use a different USB 2.0 PCI card, like from Sonnet. I use a Sonnet in a G5 and it works great. There are (at least) 2 USB chipsets and I find the TI ones are great and the other not so great.
The fact it works on 1.1 and the 2.0 on the G4 at least tells you it is not the iPod and a USB 2 card is $20 or $30 at the most.

I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon for that event is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

Video Stabilisation not working in 3rd Party Apps

Hello,
I did some searching but couldn't dig up an answer, and perhaps the answer lies in the hands of the developer.
So yesterday I bought a Z1 Compact to do a very specific job. It's sole purpose is to be used as a dash-cam on my 2-wheeler and as such the contender for my choice had to be waterproof, have a full-hd or good quality camera, and have image stabilisation due to all the vibrations associated with this task and where it will be mounted.
I'm using an app called VideoRegPro, within the app it says it supports video stabilisation, although it also says it may not work with some devices (presumably because IS is not available on all phones yet), however it makes no difference to the recording and IS seems to be off no matter what I select with this option.
I've also tried using the following apps:
AutoGuard Blackbox
DailyRoads Voyager
Kimgisa Black Box
but all have the same issue even though the developer may state they support IS.
I'm running 4.4.2, and the exact model number is: D5503
I hope someone can help, as this is the last piece to the puzzle to get this all working.
Thanks!

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Provided the function works with the default application then unfortunately this would be down to the third party application developers to work in the compatibility sorry.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

IPhone Photo Edits Not Saved with 3rd Party Apps

I have been using Postagram successfully for some time. However, now, when I take a photo with my iPhone and save/done the edits I make, this version of the image is not uploaded to Postagram-only the original, unedited image is uploaded.
In short, I take the picture, I edit the picture, I click save/done and the edited image lives in my Camera Roll; however, only the original version is uploaded to Postagram.
Has anyone experienced this or have a solution?
Thanks.
lsb

I have this issue but didn't recognize it until I read your post. I thought it was 2 bad photos.
I'll subscribe to this tread to see if anyone comes up with a fix.

Zoom not working and fullscreen image preview not working. !

I have updated the latest mountain lion. After this i am not able to zoom in using the control key and two finger upside slide on trackpad and also the image preview which before i could see fullscreen by spreading out two fingers is not working now. Please help me up with this issue if anyone possibly could as i have adapted these features in my designing life.
Thank You.

Mine is even weirder, but maybe I can help.
First, a number of people are reporting that the zoom feature seems to stop working after the computer goes to sleep. You get it back if you reboot. However, a simpler solution is that you can move the cursor to a screen corner - one you have set up to start a screen saver - and when you move the cursor away to stop the screen saver, the zoom works again. Still a bug, but fairly easy to deal with until your computer goes to sleep again.
Mine is really weird because, as I was working to try to get zoom to work before finding out this other stuff, somehow I ended up with a situation where if I turn on zoom, the screen instantly zooms and I can't get it to unzoom except by turning off zoom. However, even though zoom is then turned off, I can zoom the screen as if it is on!
So, besides trying the trick of activating the screen saver, you might try turning off zoom and see if it will still zoom.

Lollipop: DSP not working in 3rd party apps

DSP doesn't work in the 3rd party applications after lollipop update. Works in Walkman.
I remember similar situation on KitKat. It was resolved eventually with firmware update, though.
Should I submit a bug and where to do it? Or I just can leave it here?

That's not a Sony issue but the third party apps developers have to address this issues. contact them directly.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Internet Not Working on 3rd Party Network (Please help!!!)

Hey guys,
Cool forum. Hopefully cool enough to solve this weird problem.
I own a BlackBerry Tour and live in Sweden part of the year. Since I put the 3rd party SIM in my phone and activated the account, I cannot get internet to work. I can use BIS services etc., but browsing the internet does not work....when I try it says "Could not connect tog the internet, please try again".
The weird thing is that sometimes I can browse google etc. through the BlackBerry Help! app...but other apps don't work. I'm thinking maybe it has to do with APN settings?
PLEASE HELP!!!!
Mitchell
Ps! BTW, I have tried all the usuals....resetting, pulling battery, resending service books, host routing tables...the problem is with WAP, not BIS.

Hi !
Don't panic yet
I think you didn't select the Flash with SFCommand in the HTML tab inside the Template dropdown menu, that's the reason your Actions Scripts doesn't work in the html view.
To access hold down CTRL+SHIFT+F12--->HTML tab--->The first dropdown menu at the top
Hope this solve your problem.

Will not charge with 3rd party chargers when asleep

My iphone 3g does not charge when plugged into a 3rd party charger and the phone is asleep. I can confirm that its not charging because the phone is still out of battery even after being plugged in overnight, and the griffin charger has a LED indicator that shows if its actively charging or not. I tired this with both a Griffin iphone charger and a Belkin charger.
When waking up the phone though, it of course shows that its charging. It took me a while to figure out that it wasnt chargin when it was asleep.
Does this happen to anyone else?

Do these chargers say that they are made to work with iphone?
The iphone 3g does not charge via firewire pins as the original did. This could be your problem.
There are many posts on charging issues due to firewire compatibility. You can do a forum search to find out more.

Airplay no longer working with 3rd party after upgrading to Maverick.

I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

I woke up this morning with the same problem (all was fine last night). Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me). All appears okay so far today (except some of my accessories in the menu bar are gone).
I sure hope an update comes SOON. In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

Image cache not working with Firefox and apex

Hi,
I'd like to cache all my images to save page rendering time and bandwidth because my images are all static and never change.
I use the John Scott's caching technique Link: [http://jes.blogs.shellprompt.net/2007/05/18/apex-delivering-pages-in-3-seconds-or-less/], in a few words this technique consists of adding a header line "Expires: date in the future" in the http response.
It works very well in IE, the images are cached and the same image can be accessed several times (within the same session or in different sessions) without issuing an http request to the server each time.
with Firefox it does not work, the same image is asked again and again to the server (i'm using FF 3.5 and APEX 3.2).
- Is it a date format problem? no, because when i type about:cache in FF, i can find my image in the cache with an expire date in the future.
The weird thing here is that the counter is incremented each time u request the image, so FF knows it is in the cache and even if the expire date is in the future, FF asks it again to the server.
- Is it a FF bug? If u read the http specs or if u google a little, u can come to the conclusion that FF does not follow the standards,
but... images.google.com for example manages to get its images cached with FF.
They use an http response header "cache-control: public, max-age=604800".
I tried the same and all kinds of combinations but without success.
When i compare my image with the one from google in the FF cache, they both have the same attributes.
- It's not an apex issue neither because it works with IE, most probably an incompatibility between apex and FF?
Maybe the use of cookie? or the http request (not the response) containing "cache-control: max-age=0"?
I've found so far 2 half solutions:
1) use ETag and modified date, see the Tyler Muth's note Link: [http://tylermuth.wordpress.com/2008/02/04/image-caching-in-plsql-applications/].
with this technique FF continues to send request each time but the answer is shorter because it's just a "304 not modified" instead of "200 OK" (200 response is bigger as it contains the image).
it's better than nothing but you still have 1 request + 1 response for nothing.
Another problem is that you need SYS access to implement this, which is not possible on an hosted server. (note that for images from the file system it is already foreseen by apex 3.1, Tyler's note is for images from the db)
2) if you preload the image (using myimage=new Image();myimage.src='...';), then there is max 1 request per browser session.
There are 2 minor issues here:
- no caching across sessions
- if u don't want to preload all the images (example a page with lots of thumbnails, when user clicks it show a bigger image, in that case the thumbnails can be preloaded but overkill for the big images), then you need to load the image, wait until the image has loaded before displaying it, it does not slow down the execution, but requires some extra JS.
I'm not asking anyone to investigate it, i can live with the 2 workarounds,
but just in case someone encountered the same problem and already fixed it.
Let me know if u managed to use the John Scott's technique with Firefox. (U can use Firebug to see the http traffic)
Thx
Tim

Hi Anshul, hope these help. Let me know if you need to see anything else.
Best,
Menu Settings:
Tab Hyperlink:
Label Text with with hyper link option not available (works as a hyperlink in chrome and IE though):
Thanks for the help in advance!

Flash Builder Design Preview Not Working With Catalyst Objects On Stage

Hi there,
I'm working with a flash catalyst component from a flex project library, and it will not preview in desing mode. Anyone ever run into this? It seems that it may be a memory issue as the custom components themselves will preview, but now a bunch of custom components all displayed in a view.
Any insight would be greatly appreciated! For now I'm back to guessing x & y coords...

Going to answer my own thread here. This issue doesn't seem to be with Flash Builder, I think the issue lies in the browser not being able to register the button modes, namely Firefox 4. I've seen it happen in other browsers too, like Chrome, where the fix is to embed the swf as param.wmode = "window". Hope this helps someone out.

MDT - Custom Reference Image does not work with Task Sequence, normal Windows 7 Enterprise Iso media works fine.

Hi,
Our MDT server is acting strange!
I have previously had this system running without problem - i could both capture and deploy computers as is and no changes have been made to mdt.
But my latest capture does not work. When i capture my reference maching in my VM environment it completes without errors and i can import the latest wim file.
When i deploy the tast sequence, it install the custom Wim image, but it ends up with "login" screen as the administrator i have entered for the capture/deploy sequence, but it goes to stop at this point and applications is not installed.
If i change the ISO in the task sequence under Install OS step, to a clean Win7 install media then the capture completes and install applications.
I have also tried to:
Capture reference without password
Capture reference without Windows updates
Customsettings.ini, bootstrap, BDD.log and SMSTS.log to be found here: https://onedrive.live.com/redir?resid=ED5029A20300B814!365&authkey=!AALV1b2ubD0laEE&ithint=folder%2cini
Hope you will be able to assist,
Regards,
Anders

if you have noticed your smsts.log, there is same error multiple -
Executing in non SMS standalone mode. Ignoring send a task execution status message request
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
User did not specify local data drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume A:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume D:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume X:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume Z:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
TSM root drive = TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
We do not find an available volume to store the local data path
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Save the current environment block TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
pszPath[0] != L'\0', HRESULT=80070057 (c:\qfe\nts_sms_fre\sms\framework\core\ccmcore\path.cpp,58)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\tscore\environmentlib.cpp,639)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save environment to (80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,842)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
SaveEnvironment(), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,420)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to persist execution state. Error 0x(80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save execution state and environment to local hard disk
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Start executing an instruciton. Instruction name: Gather local only. Instruction pointer: 1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSCurrentActionName=Gather local only
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
what about the mass storage driver in your boot image, is it updated?
Md.Waseem Please remember to click “Mark as Answer” on the post that helps you. Thank you.

Image preview not working with 3rd party photo apps in iPhoto/Image Capture

Similar Messages

Maybe you are looking for