Image Processor : error 325

Hello, I am trying to make an image processor but a dialog box appears with the following error code 325 What is it and what can I do to make my image processor. Thank you in advance

When do you get that? Did the Image Processor Dialog display ?

Similar Messages

Photoshop Image Processor error

I'm trying to resize some images using Bridge (which I've done several times before) but this time, for some reason, it's giving me an error. This is what I'm doing: 1) click on large size JPEG. 2) under Tools > Photoshop > Image Processor > Save as JPEG > Run 3) a window pops up saying: Sorry, something major happened and I can't continue! Would you like to see more info? 4) when I hit "Yes", another window pops open saying: Error: General Photoshop error occurred. - <no additional information available> : 1344 What am I doing wrong or different and how can I fix this? HELP!

Update: I actually spoke with a Nik filter tech about this problem, because after I had her put Nik filters in the right places, the "Window does not have a constructor" error came back, and reinstalling the SL update did not work this time. She said they have seen others with similar issues using SL. If I use a different administrator account, everything works fine.
So, this appears to be a SN problem. Hope they are working on an update!
Kenny

Scripts/Image Processor Error Message

When using Image Processor on Photoshop CS5, what does the following error message mean and how can I fix this issue? ReferenceError: Window does not have a constructor : 327

Contact Adobe support, you hit a bug. I never seen that one pop up before.
But in general what it is saying is it is trying to create a window and to do so it needs to reference a constructor.
That constructor should have been automatically created or a programmer creates one from scratch, that depends on how the code was created. Since that bug normally does not appear, I would say a some code pointed to the wrong location in memory hence the word reference. (In generic terms reference means to point to a location in memory)
Try it again and see if it repeats itself. I think Adobe will tell you that you need to reinstall photoshop, but its better that they tell you that as I could easily be misinterpreting that error message.

Image Processor error

I'm trying to run a script with the Image Processor on my iMac. Here's what I am doing and the resulting error:
Open PS (CS4)
>File
>Scripts
>Image Processor
from here I select the folder to get the images from and where to save the images to and I also set size perameters for jpb, srgb as well as the action I want to run prior to saving/closing.
The images are opened in PS and it looks like the actions are being performed and then at the very end a pop up box appears that says "Sorry, I could not process the following file(s):" and it shows the file names. This has never happened before today. I tried closing PS and reopening to see if that would solve the problem but no luck. The action being peformed has a flatten/merge command built in so that's not the problem.
The strangest part of all of this is when I click OK on the error box, the action on the image completes its run and I see the photo sitting in the PS window as a jpg. I can even see the file saved as a jpg in the folder I told it to.
Any idea what's going on here? I can't do this with a bunch of photos and have to go through and close each one out individually. Sorta defeats the purpose.
Your help is appreciated!

Those actions at the bottom of your actions panel screenshot are simply
a reference to the actions themselves. Check if you actually have those
actions loaded into the actions panel.
In other words is the Kubota Mini Actions Set actually loaded into the actions panel.
MTSTUNER

Image Processor error message

Issue:
On Mac 10.9.2, running Adobe CC, I attempt to convert a selection of PSD files using Image Processor through Bridge. I get an error stating "Sorry, I could not process the following files".
Image Processor supports conversion from PSD files as far as I know. Why is this not working?
I see on the forums that this error message sometimes comes up when you are using the "Run Action" function, but I am not using this.

After a stunningly unhelpful chat session with Adobe Support, it seems that the issue stems from the fact that the PSD files were originally EPS.
You see, I actually need to end up with TIFF files, but Image Processor doesn't accept EPS.
So I thought I would have to manually go through and save each EPS file as a TIFF in Photoshop--but it doesn't even give me that option! Did some testing and this seems to be because the EPS files are in Duotone mode.
I can only choose from Photoshop, Large Document Format, Photoshop EPS, Photoshop PDF, and Photoshop Raw.
As a workaround, I decided to manually convert to PSD, thinking that then I could run them through Image Processor and get my TIFFs.
But now Image Processor is rejecting the PSD files.
What to do?

Dr. Browns Image processor: Error #1200:883

Using Dr. Browns Image processor, I have recently gotten this error message
Error #1200:883 not allowing me to process my RAW iamges. Has anyone experience with this and how I can fix this problem?
much appreciated...

I wonder if this PDF Processor script would work better for you:
http://www.ps-bridge-scripts.talktalk.net/
Look under PSCS Scripts in left most column

Image processor error - original photos gone!

I am running CS5 64bit version 12.0.1 on a windows machine. When I select a bunch of photos to be re-sized in bridge (version 4.0.2.1) the script runs, but at each photo, it asks what level of jpeg compression to save it as. Then, when the script apear to be done running, there is an error message that it could not process a list of files (all of them it has processed) and closes.
Problem is, it does not save anything into the jpeg folder it creates, but instead saves the re-sized photos in the place of the originals, efectively deleting the originals. At least the originals are still on the memory card, but what gives. Am I the only one with this error? Is there something I can do to get it working?
Thanks for any replies,
Jim

Check the image processor dialog and make the destination folder different
from the original folder and not set to Save in Same Location.
If your running an action, check for save steps in the action.
If you don't want an action to run, uncheck run action.
MTSTUNER

Image Processor Error Question

Hello,
I am trying t ouse Image Processor for the first time and I get an error that say's
Server Interface Error "Step1Icon':375
Does anyone know what that means?
Hugs,
Theresa

I"m using PSCS5.1 I've reinstalled it twice now and thinking I may have to reinstall it again? NO NO NO...I have not on purpose removed or trashed anything I am good playing with PS I've been doing it for years but I'm about a ZERO when it comes to being able to do anything else with the computer.
I use Windows 7.
I will try the ctrl-alt-shift.
OK C.Pfaffenbichler..... YOU ROCK! it worked!
Thanks thanks THANKS!

Image Processor Errors (Message #1344) - CS2 & 3

Just started having this issue. Basically the machine tells me: SORRY, I could not process the following file: (file location/file name).
I have searched the forums and found nothing which would help.
As of last Thursday (3/12/09) the processor worked fine. Since the problem began I HAVE been able to re-process a jpg file (previously converted from NEF) but it will NOT handle tiffs, psd or nef format. This is true of both CS2 and & CS3.
Early in the process I got a message asking if I wanted more information about the error and it gave me a small window saying it was error message #1344. I have not been able to find information about that error number.
I have re-installed CS3 but this has not made any difference.
Thank you now for any suggestions.
Macbook - 2ghz Intel Core 2 Duo
OS 10.4.11
3 GB 667MHZ RAM
Memory set at 70%.

It means that your old account is corrupt.
You could start by running Disk Warrior and Repairing Permissions.
Then try doing an Archive & Install followed by updating to the current OSX version by using the COMBO updater (you can download that from Apple).
Then try pulling the whole Prefs. folder out of your old Account and letting new Prefs form themselves for everything and only add back any old prefs that you find that you really need.
Lots of luck

How do I fix an access rights error when launching Image Processor in Adobe Bridge CC?

Often when I am working on files and want to batch process Jpegs for clients I get an error message from Image Processor. It will state "I am unable to create a file in this folder. Please check your access rights to this location ...."
I have cleared cache and up'd my history levels. I checked to make sure the files were not locked and read/write was enabled. I am not sure why this error keeps occurring. I am using Adobe Photoshop CC 2014 (2014.2.2 release) with Adobe Bridge CC (6.1.0.115)

It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Error message when trying to use image processor in CS2

Hi
I am trying to use image processor to condense 500 proofs for my website - however although I have done many times before with no problem, now when I hit the Image processor button before I even get to key in details it is bringing up the sorry something major has happened message and I can't continue - the details of this message are as follows - ref error : this.dlgMain.ddset on Change is not a function :810 - does this mean anything to anyon? Any ideas on how to overcome would be much appreciated.
thanks

Go to Russell Brown's website and download his package for CS2. His 1-2-3 Processor is much more flexible than the one provided by Photoshop.

Why am I getting this error when trying to do Image Processor?

Ok I am using Bridge & Image Processor to add a water mark to multiple photos at a time with my ready made action. But for some reason I seem to be getting this error message every few pictures?
I've never had problems with other photo sets doing this before, but it was just recently that it started.
But it will successfully add the water mark to some of them via the Image Processor

Actually, my DVD multi-drives are I:\ and J:\, as my C:\ thru H:\ drives are my individual internal HDD's. Even on my laptop, my multi-drive is F:\. I always list my internals in order, and my multi-drives afterwards. In my case, it's simple layout for simple minds. I am also keen on having my internals listed at the hardware level as 0 = C:\, 1 = D:\, 2 = E:\, 3 = F:\ and so on. Once let a builder deviate from this order and it bit me big time - never again!
Now, you are possibly correct that the D:\ might be the OP's D:\ is the multi-drive, and now some source disc is not in it. To keep this sort of thing from happening, I ALWAYS Copy my Assets to an internal from my externals (usually), my NAS, and from any archive discs. Importing/Opening from a DVD/CD is often asking for trouble.
Good luck to the OP,
Hunt

PSCS4 Memory Error with Image Processor

When I use the image processor in PSCS4 to process a large number of raw files using ACR 5.1 (Nikon D3 NEFs), I consistently receive an error message after about 10-11 files have been processed that the instruction at 0x696336ab tried to read memory at 0x6C (or thereabouts) and the memory could not be read. I am saving as JPEGs with the color space set to sRGB.
I de-installed and reinstalled PSCS4, but the error persists. The image processor worked fine with PSCS3. A workaround that solves the problem is to process the files as a batch using a simple action to accomplish the task.
I am running Windows XP Pro Service Pack 3 with a dual Xeon processor and 2G of error correcting memory.

Hmm.. I was getting a similar error with CS3 and was very happy to find that it appeared to be cured in CS4. The CS3 issue would appear if I tried to process more then 100 NEFs. My workaround was to do them in smaller batches (60-75). Perhaps you might try reducing the memory alotted to PS or run it without any other apps running?
Russell

Image Processor CS4 Cannot batch process from psd to jpg ERROR MSG

I have been receiving the error message "Sorry, I could not processes the following files:" when ever I try to change DNG or PSD files to jpg in camera raw. It does not matter if I try this with one file or 100. I am running CS4 on a Mac OSX 10.5.8. I have enough memory, have cleared trash, purged cache....I don't know what to do to make this run correctly. Please help!

Thank you for responding and yes, I would be more than happy to elaborate.
In Bridge I normally change my images from psd or dng using the following steps:
Tools
Photoshop
Image Processor
change to jpg with a quality of 10
This has always worked in the past on CS3 and worked a few times once I upgraded to CS4.
I can do one image or a number of images. I started receiving the error message stated above
when doing these steps.
I have purged Bridge cache, have memory on system...startup disks are not full.
I cannot figure out why I keep getting this message or how to fix it.
Any and all help is much appreciated!!!

Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?

Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week.

Image Processor : error 325

Similar Messages

Maybe you are looking for