Image processor: "No source files could be opened by Photoshop."
I am also getting a "There were no source files that could be opened by Photoshop" warning when trying to save jpegs of open images (opened from a PDF) using the image processor.
Here is what I'm doing:
1. Open multiple pages of a PDF into Photoshop
2. Run the Image Processor with settings:
- Use open images
- Save to "select folder location" (choose a valid location)
- Save as jpegs
3. Run
And it gives me the warning. How can the files not be opened by Photoshop. They already are?!?
JJ, thanks for the response, and my guess is you are correct. It would be nice if Adobe would change this. My whole intention of using the Image Processor in this case was to "batch save" all the open files. As far as I know, there isn't another way to do that without creating an action or other such nonsense. ; )
At any rate, thanks for your input and explanation. At this point, I suppose the issue is as good as solved.
Similar Messages
-
when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.
I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?
-
I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.
I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data. -
TMS Error messgae: Source file could not be opened. Message: FTP Failed
Can you please help me with this error ?
I am trying to adjust the import queue on prod system, but I get this error:
TMS Error messgae: Source file could not be opened. Message: FTP Failed
SLOG:
STOP TRANSMIT BUFFER ENTR SID g 0000 20110720075455 ADMIN ulvcp743p
STOP TRANSMIT BUFFER ENTR SID g 0000 20110720075809 ADMIN ulvcp743p
START TRANSMIT BUFFER ENTR SID g 20110720075812 ADMIN ulvcp743p
STOP TRANSMIT BUFFER ENTR SID g 0000 20110720080133 ADMIN ulvcp743p
START TRANSMIT BUFFER ENTR SID g 20110720081655 ADMIN ulvcp743p
WARNING: /usr/sap/trans/tmp/SID.LOB is already in use (10), I'm waiting 2 sec (20110720081843). My name: pid 28901462 on ulvcp743p (SIDadm)
WARNING: /usr/sap/trans/tmp/SID.LOB is already in use (20), I'm waiting 1 sec (20110720081918). My name: pid 28901462 on ulvcp743p (SIDadm)
WARNING: /usr/sap/trans/tmp/SID.LOB is already in use (30), I'm waiting 5 sec (20110720081951). My name: pid 28901462 on ulvcp743p (SIDadm)
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
STOP TRANSMIT BUFFER ENTR SID g 0000 20110720082014 ADMIN ulvcp743p
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18Hi ckary,
Thanks for your post. It looks as if your computer is not seeing the driver
calls and thus it gives the error saying it cannot complete that task. Does
this happen with any other example programs you run using DAQmx? What version
of DAQmx do you have? I would first recommend getting the latest DAQmx driver
version, 8.7.1. You can find this at the following link below.
Drivers and Updates
Please post back if installing the latest driver does not
fix the problem.
Corby_B -
How do I save Lightroom image edits in source file?
My experience with the trial version of lightroom is very positive in terms of the convenient and powerful capabilities for editing images and the associated metadata. But I can't find a way to save the "develop" edits to images into the source file for the photo I am working with. So far, I am able to save the metadata into the file but not the image editing. From what I read, I fear this is not possible without silly round about exporting to new files then copying / moving multiple copies around, etc. Without this ability, I am pretty sure I will not purchase lightroom and will miss out on all the powerful features. Without an OPTION that turns on the equivalent of a SAVE button, managing my photos collection would be a nightmare.
So my question is: How do I save the edited (i.e., developed) version of a photo back into the same file where the original photo was stored?
Please, please spare me all the reponses telling me how stupid I am for wanting to do this and that the cognisenti and professionals would NEVER do this. But please just tell me there is a secret place to turn on this option in lightroom.
Thanks in advance.I had the same requirement to save in JPEGs files all non-metadata edits performed in Lightroom, in order to share modified pictures without duplicating files. By the way, I think it’s going to be more and more required by casual Lightroom users, as people get used to instant photo sharing in many situations where quantity matters more than quality
Here’s a nearly automatic (at least, scalable) solution that works, although it slightly lowers the quality by re-compressing the original pictures.
Once for all:
Download and install the wonderful Lightroom plugin “jf Run Any Command”, provided as donationware by Jeffrey Friedl here: http://regex.info/blog/lightroom-goodies/run-any-command. This “export filter” plugin allows you to run a command of your choice with each exported file, as part of the export while it’s going on. (You may also browse Jeffrey’s blog to find many other useful and beautiful things.)
In Lightroom, pre-define an export settings as follows:
Export to the hard drive, to the original picture folder, without adding the exported file to the catalog
Name the exported file “EXPORTED-{Filename}” (or anything different from the original file name)
JPEG format, 76% quality (see An Analysis of Lightroom JPEG Export Quality Settings at http://regex.info/blog/lightroom-goodies/jpeg-quality)
Keep all metadata
Here’s the interesting part, the Run Any Command settings:
Command to execute for each exported picture: copy "{FILE}" "{Path}\{LIBRARYFILENAME}" (this replaces the original file with a copy of the exported file)
Command to execute upon export completion: del {FILES} (this deletes all exported files).
NB: One could wonder why not directly export with the original file name and silently replace the original files (I believe Lightroom would allow this). It’s just a matter of error handling: in case the export goes wrong, no original file is changed at all.
The easy part: each time you want to save edits:
In Lightroom, select the pictures to save, and export them with the pre-defined settings. You're almost done. The JPEG files are ok, but inside Lightroom you see the modification effects doubled, as their specifications remain in the catalog database and they apply on modified JPEG instead of the original files.
While the entire set of "saved" pictures is still selected, in the Develop module switch Autosync on and click Reinit to erase all modification specifications from the catalog for all pictures, then press CTRL-S to write down to disk any metadata updated by Lightroom -and accept if required to confirm that Lightroom values should replace externally set values.
Stephane
PS: Papa Ben, I'm curious about the decision you finally made -
In trying to download an update I first received: "There were problems checking for, downloading, or installing this update. Firefox could not be updated because: No data was received (please try again)" It also gave a link to download manually. When I tried from the Firefox website I got: /Users/(deleted for privacy)/Desktop/Firefox 3.6.3(2).dmg.part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator. I tried this 3 times.
== This happened ==
Not sure how often
== Mon around 11 am, central time, May 17, 2010I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?
-
Every time I attempt to save a webpage (.html format) I get a message indicating that some .js-type file was not saved because the source file could not be read.
I did some "cleanup" of add-ons because there were so many. Is it possible I deactivated one that I need to read .js files, or could/would it be something else?
Thanks.Please help.
It is getting worse
Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
Please help. -
How I can diable in firefox dialog box "download error could not be saved, because the source file could not be read. " standart download manager when file not downloaded
It is possible that anti-virus software is corrupting downloaded files or is interfering otherwise.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See:
*http://kb.mozillazine.org/Unable_to_save_or_download_files
You can try to set the browser.download.manager.scanWhenDone pref on the <b>about:config</b> page to false.
*http://kb.mozillazine.org/about:config -
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
-
"ABC could not be saved, because the source file could not be read" error when downloading
Almost every time I download a file, the download gets to the end and then I get this error "<filename> could not be saved, because the source file could not be read", and then the download fails.
I checked my addons and they are not the problem. This doesn't happen when I try another Firefox profile. I tried several solutions offered in "http://kb.mozillazine.org/Unable_to_save_or_download_files" but they didn't help. It's not my antivirus.
I hate to start another profile because I have my current one just the way I like it.
Please help!You can check the file attributes of all the files in the Firefox Profile Folder to make sure that you have write permission.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Could not be saved because the source file could not be read.
I tried to download and after a while, this error message: ''[filename] could not be saved because the source file could not be read.'' I've been on google searching but I could not find the answer can someone PLEASE help me. it happened when downloading a game and I've already seen a few times before but it was less important.
sorry for the bad english I used a translator.This problem isn't only happening with Firefox 4, for windows, as the System Details, and Tags indicate.
I'm using a Mac laptop (OS X 10.5.8 -- Leopard), using Firefox 6, and have been having this problem with large files for quite a while ... possibly since FF 4, but definitely with FF 5. The large files I've had the problem with are in the 500 - 900 MB range, and from commercial sites as well as most recently with a zip file containing photos from a friend which he uploaded to dl.dropbox.com ... attempted it numerous times, after trying the various suggested "fixes", and each time at around 255 MB, the download quits, with the error that file cannot be read from the server.
The various proposed solutions I've found on the web -- resetting the user configured options connected to downloads in FF config (about:config); deleting the compreg.dat file in the FF profile folder, don't pause the download (never have done this) etc.
Others have opined that the problem is flaky intermittent WiFi, or Security/Anti Virus software interfering with FF's accessibility to the file during the download; or a caching problem at one's ISP -- HOWEVER Safari doesn't experience this problem at all. Each time that I've experienced it in FF, I launch Safari, and can download the file completely without any errors.
Would really like to see someone from Mozilla respond to this ... lots of us are experiencing it.
Whatever happened to Netscape's ability to recover from download interruptions and resume a download at the point where it had been interrupted (like when a dial up modem dropped the line in the middle of the download) -- sure would be useful to see that feature come back in FF.
Thanks,
Muiz -
\Lightroom_4_LS11_win_4_4.exe.part could not be saved, because the source file could not be read.
When updating Lightroom 4.1 to 4.4 I get this message-LS11_win_4_4.exe.part could not be saved, because the source file could not be read.
Hi,
Please Uninstall Lightroom 4.1 and then download the latest version to install. It should work.
Regards,
Abhijit -
ITunesSetup.exe.part could not be saved, because the source file could not be read.
I keep getting this error message when I try to download itunes. I have windows vista. please help?
iTunesSetup.exe.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator.Hi,
Please Uninstall Lightroom 4.1 and then download the latest version to install. It should work.
Regards,
Abhijit -
Ap3505500k.wmv.part could not be saved, because the source file could not be read.
I try to download a movie and I receive this error message:
ap3505500k.wmv.part could not be saved, because the source file could not be read.
I have never had any issues like this before.Hi,
Please Uninstall Lightroom 4.1 and then download the latest version to install. It should work.
Regards,
Abhijit -
I am having trouble dating to version 3.6.14 or updating to the Beta testing. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb
Solved for me.
I set the owner/permissions of my profile's mozilla folder's (and all the files in it) to read/write access, and the problem disappeared.
in linux:''
* cd /home/myusername/.mozilla
* chown -cR myusername:mygroup ./
* chmod -cR +rw ./
'''Never do that with root privs (nor with sudo)'''
Maybe you are looking for
-
Search for [Remote Key] and [Remote System] in Data Manager
Hello all I would like to be able to search on the remote key and the remote system in the MDM Data Manager is that not possible? I thought I remembered seeing that possibility under the Free-Form Search but now I can't find it. I have, however, foun
-
Music from one ipod to another
Since I apparently lost all my music in my music library, and I am planning to buy a new ipod (30g video)how can I move all my songs from my mini to another ipod?
-
Classification for Merchandise Category
Hi all, I am an MM consultant but new to Retail. I am trying to set up classification for Merchandise category. I have created a characteristic profile and i assigned some characteristics in this profile (e.g ingredients, size, etc). Then i went to W
-
"Literal Match Doesnot match format string" error
Hi All, i created a view based on the querry below. The view runs fine and gives me correct result. but when i add the view to report it trows me oracle error ORA-01861 which is literal match doesnot match format string. did anyone face this problem
-
Within this update, two iMovie 6 items are addressed: 1. Console no longer reports a series of "Quartz Composer QuickTime Component" messages for iMovie '06 when applying a Ken Burns clip or image. 2. Addresses an issue for iMovie HD and Mac OS X 10.