Image Processor not outputting correct size

It doesn't matter whether I try from Photoshop or Bridge, the result is the same: I'm doing a simple JPEG resize to fit, from 603x603 to 100x100 but they always result in a size of 101x100! What the heck could be going on? I've tried specifying a pixel less i.e. 99x100 but then it actually does it at that size. BTW, I'm running it on an IMAC OS X if anyone has any ideas, thanks.

[email protected] wrote:
> It doesn't matter whether I try from Photoshop or Bridge, the result is the same: I'm doing a simple JPEG resize to fit, from 603x603 to 100x100 but they always result in a size of 101x100! What the heck could be going on? I've tried specifying a pixel less i.e. 99x100 but then it actually does it at that size.
I've seen the same thing happen. It drove me nuts because it was in one of those
cases where the dimensions had to be exact. My solution (because I needed one
fast) was to trim off either a row or column of pixels. Probably not the best I
could have done, but I didn't have much time to work through it any deeper.
-X
for photoshop scripting solutions of all sorts
contact: [email protected]

Similar Messages

Slideshow images will not display correctly on mobile phone

Hello,
I have a website which I used several slideshows, in areas I would typically just used a rectangle and fill with photo. This was done because my client wants to be able to update the images through business catalyst. Unfortunately, when viewed on a mobile phone (I am using iOS 7) the slide show images do not display correctly.
What can be done to fix this? Is there another workaround I should try?
Thanks!

Hi Nicole
The images that you are using on parties page are stretched , if you check the image frame you can see that.
As a result the image frame is stretched over the side image , they are not showing properly. If you resize from Muse end , then also it would not be fixed because Muse remembers the image size as you have inserted and when viewed , Muse stretches the image to original size as how it was inserted.
Please resize the images outside Muse , use any image editor like Photoshop and then use the exact dimension of the image frame on page.
This would resolve the issue.
Thanks,
Sanjit

Why the photoshop image processor not appear in bridget cc?

Whythe photoshop image processor not appear in bridget cc?

Hello,
I had this problem too after I did the latest upgrade and installed Ps 2014 a day or so ago. Bridge was missing the Photoshop option under Tools. I uninstalled Ps 2014. Then for good measure I uninstalled and reinstalled Bridge. It still wasn't there then all came back after I reinstalled Ps 2014. Good luck.

Adobe pdf 8.0 not outputting correct page size from publisher 2007

i have windows vista home premium with microsoft office 2007. microsoft publisher is not outputting the correct page size when converting to pdf. In Word 2007 i have the document size 4.5 x 6, and if i convert with the adobe add in, the new pdf is exactly 4.5 x 6. In publisher i have a postcard size 8 x 5, when i print to pdf or convert using the converter, it sticks the postcard in the center of an 8.5 x 11 page with crop marks. I can't work with this, i need the pdf to output the exact page size as the microsoft publisher document. i've tried changing page sizes in page setup in the publisher print dialog box as well as the advanced settings in pdf. it doesn't make a difference. it always prints on 8.5 x 11 and centers the postcard in the middle of the page. any help is appreciated

Think of the paper size in publisher (and likely the printer options) as the setting that Publisher is trying to produce when printing. Think of the paper size in the Adobe PDF printer properties as actually putting the proper paper in the printer. If you do not do the latter, you will get the printout properly sized in terms of your setup and printed on 8X11 paper that is put in the printer. They selection of the paper in a printer is not typically an automatic feature of print drivers. One is the sizing issue of the application and the other is the actual paper that is used. If you printed to actual paper, you would actually put in the 8X5 paper or whatever in your printer. If you used 8X11 paper in the printer, then you would likely get the same result you have in the PDF.
There may be two convert options in Publisher (depending on the version of Publisher). One would be PDF Maker, the Adobe add on. The other would be a convert to PDF provided by MS. The latter started coming with OFFICE 2007. Also, with OFFICE 2007 you needed a newer version of Acrobat to get the Adobe PDF Maker (AA8 I think was a minimum). If you use PDF Maker, then you have to select the printer properties in PDF Maker for the paper.
I just did a test sample with AA5 (sorry, that is what is on this machine - but I am sure I would get the same result on my other machines). I created a word processor document with a 5X8 dimension and printed to the margins (set to 1 in). I then printed to the Acrobat Distiller printer (the old name for the Adobe PDF printer) after setting the page to a custom 5X8. The end result of the PDF was a PDF that was 5X8 with 1 in margins of my printing as I had selected. I thus printed with a custom page size in my document and matching page size in the printer properties, getting the expected result. However, I am getting inconsistent results when I try with WORD on this machine.
To be more helpful, I guess I am going to at least have to try my AA7 on my notebook with OFFICE 2003. Those are both behind your version levels, but I would expect the results to be the same. I will also try with my word process that worked out fine here, but did not retain the paper size setting in the driver, when WORD would not allow the size reduction (that is the inconsistency I mentioned!).
I will report back later. Bill

Flash script image not displayed correct size

I have a contact form image on my website at the bellow URL. this is not displaying at the correct size when viewed from any firefox web brouser, but is fine when viewed from other browsers like IE9, Chrome, etc. I wonder why this is and if there is a pice of html code i could add to me web page to correct this image distortion
http://www.netprice-mobiles.co.uk/Contact_Us.php
I have found that when the contact formis viewed on firefox v10.0.2 from a computer OS windows XP SP1 that looks ok, but in vista and windows 7 it does not.
Any help appreciated.

Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Image processor not saving settings for images to process

Hello,
I have raw images taken by a Canon G9. I am trying to convert these .CR2 images to LZW tiff's. This is my process:
In Bridge, select images to process
Click tools > photoshop > image processor
Image processor window comes up. I have the following settings:
     -Open first image to apply settings
     -Save in same location
     -Save as TIFF
          -LZW
     -Include ICC profile (no idea what this is, but it's checked)
Click 'run'
First image appears.
Apply settings by clicking the pre-sets button and selecting my preset
Image looks great
Click 'Done'
Images process
At the end of the process, I get a message that says Sorry, I could not process the following files: (c:\temp\IMG-9678.CR2. Which is the first image in my process where I applied my preset for the remaining images.
The remaining images are in my TIFF folder as tiff images, but none of my preset settings from the first image carried over.
Am I missing a step?
Thanks in advance for any help. I'm lost.

I guess that could mean that Adobe Camera Raw isn’t part of Photoshop’s Document Object Model.
But I suppose in such a case it should be possible to open all the images in ACR and apply the settings to all of them in one step with the Synchronize-button and then use a Script to save all open files.
Admittedly that would be less convenient than Your proposed way, but maybe someone else has a better idea.
»-Include ICC profile (no idea what this is, but it's checked)«
Please don’t take this the wrong way, but You should read up on color-management.
Not including the profile can generally be considered unprofessional (except maybe in an internet-specific context) and a potential source of problems.
An images’ pixels’ RGB-values can be correctly translated to the originally intended color only when the »key« (the icc-profile) for said translation is known.

Image Processor not working in CS 5

I have installed CS5 Design Premium on my Mac Pro at work. (Had installed the education demo, but it turns out my school doesn't fit Adobe's critereon for eligibility - and doesn't take it back after telling you that) although we have qualified for years, and we education people in 14 countries are are the top school in the world on our subject. No biggie, the upgrade's only $50 more with the NAPP discount.
But at home it installed just fine on my Mac Pro and works great. But at work, where CS4 works flawlessly, I can't get it to run Image Processor from Bridge, or import photos into Photoshop Layers, it does do Photomerge, but it also does not do HDR PRo.
Before the settings wouldn't stick in image processor, and I fixed the issue by changing permissions on the Photoshop settings folder in my user account. Now settings stick for Image Processor, but when I tell it to process a set of images, it keeps coming up with a dialog saying "Sorry, I could not process the following files..." and then gives a list of each file with it's the path.
I'm wondering if the javascrpits running this process are broken, or have permission problems. (Image Processor, HDR Pro, etc.)
If in Bridge, I seelct Tools->Photoshop->Batch, it gives me an error dialog: "FatalError: General Photoshop error occurred. This functionality may not be available in this version of Photoshop. <No additional Information Available>"
I rely on Photoshop for a very large portion of my work. And that includes processing thousands of images. I cannot see how this problem is unique to me. Is anyone else having this problem? Is there a fix? Am I stuck with CS4 for automation? BTW, I can use Applescripts to automate Photoshop CS5. How wierd is that? Scripts I wrote work, but built-in ones appear to be broken on this machine.
Additional information: I'm on a Windows network using Active Directory and my company user account while this is happening. Where it works at home, it's just my own Mac running OS X 10.6.4. I have all the latest CS5 updates installed.

But all the
files that are in my home directory (Snow Leopard 10.6.5) give that error.
Do you have a beta of Snow Leopard, to my best knowledge 10.6.4 is the
latest version??
I'm going to format
the drive on Monday and restore my system from Backup and see what that does.
First try the uninstall CS5 suite using the uninstaller that is in each
application folder. Also erase your serial number from computer and run the
clean script:
http://www.adobe.com/support/contact/cs5clean.html
It is useless to reformat and after that reinstall from Back Up when you
also re install the current preferences, highly likely you will end up with
the same problem because you copied the old prefs again

Adobe Photoshop CS3 Image Processor not converting files to sRGB Profile

I have been experiencing a problem with Photoshop CS3 Image Processor no longer converting profiles to sRGB. It converts all of the files from Camera Raw to JPEG, but not sRGB as well. I used to be able to batch convert an entire folder of RAW images to JPEG, sRGB through the Image Processor.
My Photoshop CS3 Working Space is Adobe RGB (1998). I need to convert an entire folder of images selected in Bridge to sRGB working space in order to publish a photo album from one of the on-line publishing companies. I can open each individual Camera Raw file in Photoshop and convert each to JPEG, sRGB, but this takes a tremendous amount of time.
The following procedure has worked for me in the past, but for some reason no longer works:
I select the images in the desired Bridge CS3 folder. Upper tool bar, "Tools" > "Photoshop" > "Image Processor". In Image Processor:
Section 1 - ""Process files from Bridge only (11)" Whether or not I place a checkmark by "Open first image to apply settings", it makes no difference in the outcome.
Section 2: "Save in same location"
Section 3 - "Checkmark by "Save as JPEG, quality 12". Also a checkmark by "Convert Profile to sRGB"
Section 4 - Checkmark by "Include ICC Profile"
I replaced my iMac one month ago and reinstalled Photoshop CS3, but this Image Processor problem had been occurring even with my old computer.
Not sure if you need this information:
I'm currently on Mac OS X Version 10.6.4
Processor: 2.93 Ghz Intel Core i7
Memory: 8 GB 1333 Mhz DDR3
I don't know if it's related, Photoshop CS3 on my old computer was running in Rosetta. I don't know if it's running in Rosetta now, the name does not appear when Photoshop boots up. How do I get it to run in Rosetta again?

Heh heh heh. It's always true that we find the answer just after making public our problems, which in turn we did after trying to find the problems ourselves for hours.
Thanks for following up with the answer.
-Noel

Animated Gif Image does not render correctly on screen

I have added animated gif image to the scene it does not render correctely.it shakes on the screen. plz give me any suggestion
i use following code
Image logo= new Image(getClass().getResourceAsStream("images/image.gif"));
logoLabel.setGraphic(new ImageView(logo));

Hello user,
I think gif are rendered smoothly.
Are you sure you are not making many object of same images everytime?
Thanks.
Narayan

Image Processor Not Working

Hi,
I used the Image Processor feature to resize and save in a separate folder all the time in Bridge CS3. I recently upgraded to CS4 and I can't get the Image Processor to work. When I select the feature, it opens photoshop but nothing happens...it just opens the photoshop window but does nothing. Can anyone help? Does the feature not function in the same way for CS4? How do I properly use Image Processor in Bridge CS4? Thank you!

But all the
files that are in my home directory (Snow Leopard 10.6.5) give that error.
Do you have a beta of Snow Leopard, to my best knowledge 10.6.4 is the
latest version??
I'm going to format
the drive on Monday and restore my system from Backup and see what that does.
First try the uninstall CS5 suite using the uninstaller that is in each
application folder. Also erase your serial number from computer and run the
clean script:
http://www.adobe.com/support/contact/cs5clean.html
It is useless to reformat and after that reinstall from Back Up when you
also re install the current preferences, highly likely you will end up with
the same problem because you copied the old prefs again

Image Processor not working for me. Help!

In a nearby thread I've reached a stumbling block. Image Processor in CS4's PS is not working for me. I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
"This layered Photoshop file was not saved with a composite image"
I've verified in my Preferences > File Handling that image previews are always saved. (But I've been using PS for a long time and previews are always available with all my manually saved work.)
So here's what happens when I invoke File > Scripts > Image Processor...
In section 1 of the menu I select the source folder where the psd files reside
In section 2, I select 'Save in same location'
In section 3, I select 'Save as JPEG'
In section 4, I change nothing. No special actions. Include ICC profile is checked.
When I select run I get an error message: "Sorry, I could not process the following files:"
And then it lists what appears to be 3 lines per psd file in the source directory:
The path to the source dir
The name of the source dir
The [source_dir]/[filename.psd]
What am I doing wrong?

mrdior wrote:
I have a folder of psd's generated on the fly via File > Export > Data Sets as File... and now I'm trying to process those psd's to generate a JPEG of each. The only strange characteristic of the auto-generated PSD files is that there is no image preview available within the Finder. When a psd is selected the preview pane reads:
The part I don't understand is the "export" Part. File > Export > Data Sets as File.. on my machine is grayed out so I don't know how this feature is used. Is Export > Data Sets as File... used with CSV data sets and Photoshop variables?
Check your Photoshop preferences and make sure you have set in the file handling tab "Maximize PSD and PSB File Compatibility:" to Always using the pull down menu. If that is not your current setting try setting that to see if the exported PSD files contain composite previews. When I use save as PSD on my system I alway see Photoshop save through up a popup window stating generating composite preview image.

Image Processor not available

I have CS3 and in Bridge, I do not have the Image Processor option available. Does anyone know what may be causing that? I do have it available in PhotoShop but I want to access it through Bridge. Using OS 10.5
thanks

I looked in my preferences for Bridge and cannot find anywhere that mentions
Image Processor.
It should be visible in the Start up scripts section of the Bridge
preferences.
But if it did work before and suddenly stopped a restart for Bridge holding
down option key to refresh preferences should do the trick.
If it never worked and it is present and working in PS itself but not
visible in the Bridge Start up preferences your install did not work
properly I'm afraid.

Photoshop CC Can't convert to jpegs; image processor not opening

I'm on Windows 7. When I open a psd document in PS CC, I don't have the option to convert to jpeg, and a lot of other types, for that matter. Also, when I click on Tools/Photoshop/Image processor it will not open up. Any suggestions? Thank you.

It was already disabled when I checked. I enabled it and tried again, still didn't work. Anything else that might be wrong? i'm getting desperate lol

Image Processor not closing Images

When I use the image processor from Bridge, I specify that I want it to process the images selected in Bridge, save as a PSD and run a set of actions. The files do get saved to a PSD folder, but they do not get closed, so they all remain open. This slows the process down dramatically and it used to close them all, as it should. Any help in getting it to close the files after processing them would be helpful!
Thanks!
Jamaica

Hi R_Kelly,
I am using CS6 (the newest version) and OSX v 10.7.5 currently.
I tried putting a save in the action, but since I'm batching raw files, it wants to pop up a save as box at the end of every image. No bueno.
I tried each of the three actions, that I have combined into one action, individually and the system closes them all just fine.
Here are a couple of screen shots to see what the error is, the PSDs are created and put into the PSD folder (great!), but they don't close!
The action is made up of several actions that I use. As I said, they all play fine individually and close as they should, but once they are all together, they won't close.
If you can figure it out, I'd be soooo grateful!
Thanks!
Jamaica

Uploaded image files not displayed correctly

Hello everyone,
I used the following article(on o'reilly) as reference for file upload:
http://www.onjava.com/pub/a/onjava/2001/04/05/upload.html?page=1
While it works fine for most files types, there are problems with image files.(I am using PrintStream, BufferedOutputStream,FileOutputStream to write the files on the server).
When links to these image files are clicked, the uploaded gif and jpeg image files are not displayed correctly.When directly opening the files on the server, it gives a 'error opening file' message.But other word docs , text files do not give an error.
If anyone else has come across the same problem and could help out , I would appreciate it.
Thanks in advance.

I do not want to enter into the logic which you are following to upload the file. I did the upload process successfully even as a blob datatype.
For this I followed the logic given in http://www.java.isavvix.com/codeexchange/codeexchange-viewdetail.jsp?id=22.
Here you can download the complete sourse code, which is working fine for gif and jpeg, I tested.
Please go with this. Also let me know, if you still have problem.
Regards.

Image Processor not outputting correct size

Similar Messages

Maybe you are looking for