Image publishing problem

people, help.
I have a site published and running thru iWeb. www.bingsti.ru
It was working alright, but since yesterday it started to mess with images.
All images are small jpg files.
When after making some changes, such as adding text, I upload the site, some images just dissapear.
The image in header never dissapears, but images on the page, they just come and go, without any logic.
The same image used on two pages can be succesfully uploaded at one page and give an error on another.
The error message is that "that there is a problem with the FTP server", but I checked the site folder on FTP and all images are in the folder.
The images are on the server, in the folder, but still iWeb shows the FTP error and refuses to upload jpg images.
Yes, I tried png images. didn't help.
Any ideas

Publish your site to a folder on your hard drive and open it locally.  Check to see if all photos are displaying as they should.  If they are then the issue lies in the uploading of the files. 
If that's the case you can try using a 3rd party FTP client like the free  Cyberduck to upload your site files to the server.  Then see if the online site works. 
Many user have found that the build in iWeb ftp client would fail and using CD fixed the problem.
OT

Similar Messages

  • Unexpected Publishing Problems

    I have been using iWeb for almost two months with no publishing problems. I publish to a folder then ftp it to my yahoo server. However, last night I began to experience publishing problems. iWeb publishes just the first five pages of my site then I get a message that an unexpected error occurred. No other clues as to why it could be happening.
    The last change I made was an adding a podcast. I deleted that podcast thinking that maybe iWeb didn't like the taste of it and tried to publish but it still won't work. I've tried about 10 times, with my screen saver turned off, battery charger plugged in, and no other apps running.
    Please help me!
    Ruben
    G4 17 inch Powerbook   Mac OS X (10.4.5)  

    Here's the latest...
    I realized that iWeb stopped publishing at the same page (I have 30+ pages on my site. It would always stop at the fifth one). So, I rearranged the order of that page, dragging it down to the very bottom of my site list. When I went to publish to folder, iWeb published everything then stopped again at that specific page. So here I thought I had isolated the issue.
    I created a new site and dragged the problematic page into it. I then created a brand new page in my main site and copy/pasted the old content into it. Ergo: a whole new page. I went to publish with iWeb cranking along nicely until it got to the NEW version of that page and then it crapped out. Again.
    I am guessing that one of the images (or who knows what, really) is messing with iWeb's fragile ego. I am going to reconstruct the page with brand new copies of the images that were on it. Images, by the way, that published fine for almost a month and that I didn't alter at all.
    Wish me luck all. I'll keep you posted.
    Ruben

  • I have LR5 on a mac book pro with a external hard drive with LR5 images. my problem is my external hard corrupted reformatedand have to this is expensive and i would to start over in LR5

    i have LR5 on a mac book pro with a WD external hard drive with my with my LR5 images . my problem is my external drive is corrupted .i was told by apple that my macshow the hard drive is there but it is not moumting and have to be reformat. i have to use recovery data to save my images on my external before i can refomat.iam willing to lose my images on my extenal hard drive but i would like to know can i erase my LR5 images and start over or delete LR5 and download it again

    Simply start a new catalog:
    File >> New Catalog
    Choose a new name and save.
    When the empty catalog launches you are ready to start over.

  • My iMac 27" Late 2012 has Image Persistence Problem

    I'm wondering what to do about an annoying image persistence problem on my 27" late 2012 iMac. I got the iMac just a few days ago. Monday actually, so 4 days ago.
    It's the 3.4GHz i7, 8GB, NVIDIA 680MX 1TB fusion drive model.
    Overall it has become the love of my life, but the image persistence thing is getting harder to ignore. This happens after only a few minutes of use. If I follow Apple's instruction on dealing with LCD image persistence, I can make it go away for a while, but it comes back very quickly.
    It is extremely noticeable on a plan dark background. It looks as thought he screen has been left on for a very long time with the same windows open, but it occurrs in less than 5 minutes of use with nothing more intense than a bit of web surfing.
    I've read that this is happening a great deal on these new iMacs, particularly teh 27" machines.
    While the problem seems to be known to those of us afflicted I don't know if Apple has acknowledged an issue or not.
    Here is a sample of the complaints: http://forums.macrumors.com/showthread.php?t=1509571
    I can make the ghost image vanish by bringing up an all white scree for a minute or so or using LCD Scrub.
    I'm wondering if anyone else has foun a solution other than asking for a replacement computer, which Apple seems to be granting on this issue?

    Avoiding image persistence on Apple (IPS) displays
    Avoiding image persistence on Apple LCD displays
    If you cannot resolve the issue yourself, then return the computer for a replacement. You may do this freely within 14 days from date of purchase, so don't delay.

  • Getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep

    getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep while deploying persistance with ejb sample application into cloud. can any one please tell me why i am getting this?

    Hi Goutham,
    I am facing the same issue. Please let me know how you have resolved it.

  • Problem: codebase, jar and image reloading problem please help!

    Hi Java Gurus,
    I have written an applet that extends JApplet for viewing webcam. In order to reduce the download time I put my classes into a doorcam.jar file. The following is my <applet> tag in my html file.
    <applet code="CameraApplet.class"
    archive="doorcam.jar"
         codebase = "webcam/classes"
         width="375" height="475">
    <param name="imagePath" value="http://judge/webcam/images">
    <param name="webCamImage" value="door.jpg">
    <param name="COMPort" value="COM2">
    <param name="frameRate" value="10"> <!-- could not exceed more than 10-->
    <param name="host" value="judge">
    </applet>
    The fist problem is that my class file does not get loaded from the jar file if i provide the "codebase" attribute as above. Instead the browser load every single class file from the webserver. This has some problem too. Coz the browser sometimes just thorough NullPointerException or ClassNotFoundException. After much of debugging I found out that the problem is the IE browser which seldom fails to load classes or image file from the server. If i referesh the browser the applet and all its classes loaded successfully and runs smoothly. This behaviour never occurs when running with "appletviewer".
    I wanted all my classes to be loaded from my jar file. After much of trial and error I found out that if i remove "codebase" attribute the browser loads the classes from my jar file and applet loads very fast. This is where the second problem comes in. The browser does not reload my webcam image file so that the webcam become alive with live images, like before.
    If I run on "appletviewer" everything works fine my web cam is displayed properly. But in IE browser the image does not get reloaded when I refresh my image to give live to my webcam display. The refresh method is given below.
    private void refresh(final URL url) {
    Image webCamImage =getImage(url);
    webCamImage.flush(); // flush out the previous image
    webCamImage = getImage(url); // get a new image
    webCamImageIcon.setImage(webCamImage); webCamImageIcon.paintIcon(webCamLabel, webCamLabel.getGraphics(), 15, 15);
    When I add the "codebase" attribute back, the image gets reloaded for every refresh() and everything works fine. But the classes are also loaded from the server. And occasionally also suffers Class loading and image loading problem. As I presented earlier, when I do refreshing in the browser everything gets loaded and the applet function correctly with web cam displaying very well.
    The problem is so strange that I could not find any way to solve it.
    It would be a great help to me if somebody provide me some work around to the problem.
    I tested on Windows 2000, Windows XP, IE 5.5, IE 6 with J2SDK 1.4.0.
    Thank you all very much in advance.
    best regards,
    Judge

    Thank you so much for the suggestions. I did tried the way u suggested. The problem still the same.
    I think its the problem between IE browser and Java Plug-in.
    I which SUN would find these incompatibilities and solve these problems.
    I even tried using java SDK and plug-in 1.4.1 it even worst. It can't even load an applet. And it does not show any loading messages nor any error messages. It just show a cross sign on the upper left coner.
    I would be so glad, if Sun would try to eliminate the inconsistancies such as caching, loading, initializing etc between browser and its Java plug-In. For example, applets behave well in appletviewer and behave unpredictably in browser environment.
    I have seen so many people in the forums with all sorts of problems because of this.
    Right now I m desperately looking for work around to my problem.
    If somebody would provide me with the solution to my problem it would be a great help to me.
    thank you all so much.
    best regards,
    Judge

  • SSRS indicator image display problem!!

    Hello ALL;
    I am having problem with displaying indicator image in DEV report manager. but same rdl works in QA environment. Both server has SP1 installed. Any Idea? Appreciate for your help. Thanks,

    Hi Techchi,
    Based on the limited information, I cannot figure it out for this issue. As per my understanding, I think this issue can be caused by the browser that run the report manager. If you use IE explorer to render the report, I suggest that you can try to run
    it in compatibility mode. If you are using another browser, I recommend that you should use IE explorer to render the report to check the issue again.
    If this issue still exists, in order to solve the problem more efficiently, I need to clarify some information.
    Are all reports with indicator image cannot render well in DEV report manager? Or just this one report?
    What is the phenomenon about the indicator image display problem? Could you please post a screenshot about this?
    It is benefit for us to do further analysis. Thank you for your understanding.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Having a image alignment problem using clearbox

    Hi,
    I'm having an image alignment problem. I cannot figure it out. I'm using the clearbox - lightbox dreamweaver widget. Using Dreamweaver CS6.
    Actual page located here. Any help would be appreciated.
    http://dirtysouthink.com/gallery/dustin2.html

    This has very little to do with Dreamweaver. DW is merely a tool to assist you in building a web site. It is purely a matter of styling (CSS).
    When I look at the structure, I see
    BODY-CONTENT (width: 490px)
         GALLERY (width: 452px)
              CONTAINER (width: 500px)
                   ITEM (width: 150px)
    From this I can deduce that:
    GALLERY will fit inside BODY-CONTENT
    CONTAINER will NOT fit inside GALLERY or BODY-CONTENT
    ITEM will fit three times into CONTAINER
    To start with, I would reduce the size of the CONTAINER so that it fits inside of its parent. Then I would adjust the width of the ITEM so that only two of them fit inside of the CONTAINER.

  • Publishing Problems - a Solution?

    For a long time I'd sympathised with all you people who'd been having publishing nightmares, even though I've been updating pretty much error free since iWeb 1.0
    Then last night after updating my blogs and making a few changes, I finally got the dreaded error messages. Tried a few times, got frustrated, and decided to sleep on it.
    Same this morning ... grrr ... but then I noticed that my iDisk had failed on auto-synchronisation.
    I'd only mounted my iDisk recently to amend my Podcast feed, so on a hunch I unmounted iDisk, rehit the Publish button in iWeb, and holy shmoly – it worked straight off!
    I reckon that publishing iWeb kicks off the iDisk auto-sync, and then you've got a conflict with iDisk and .Mac trying to outsync each other.
    Anybody else found this? if this solves publishing problems for a few of you then great. If it works for a lot of you, even better. If the majority of you get sorted, then that's a revelation!
    Dual 2.3 GHz PowerPC G5   Mac OS X (10.4.6)  

    My message to Apple stated:
    "My pages go through the "create" process then start
    on the "publishing" process then come back with an
    error message that tells me to check my internet
    connection (which is fine at 2 different locations. I
    spent 13 hours fighting this yesterday. It has
    created a major problem for me -- and this just after
    I paid an extra hundred dollars to upgrade my
    broadband. Your telephone people tell me you're
    working on this. Please advise when it will be fixed
    so I don't waste another 13 hours today."
    Regards,
    Richard M.
    Richard, thank you for writing this. I would like to know how this all shakes out, and I am glad that it is an Apple server problem and not mine.
    Meanwhile, I want to say how helpful it is to have this iWeb forum, and also thank the very generous and thoughtful souls who take the time to help beyond what normally would be expected. Those people know who they are, but I also am grateful to everyone.
    For example, I was greatly relieved to read that I was not the only person getting Network Failure messages, since it meant that probably I was not working with a defective application -- one that started out fine but somehow went south on me and would not be replaced by Apple. This may seem a trifling thing to some, but when you are in a spot that you perceive as Hot, assurance from the outside is very much appreciated.
    I hope that when you all finish your websites, you post the URL so we can all see it; after all, in a sense we are all comrades in arms (because sometimes it can seem like a war, due to the Fear Factor) and our fates are somehow connected even though we are all so-called strangers.
    — Lorna in Southern California

  • How to solve the image display problem in the iTunes Store

    Hi guys!
    I just want to give a work-around for all of you having the image display problem in the iTunes Store. In my case only the square images in the slider sections won't load:
    I had this in my last W7-installation and got it again in W8 after the first few weeks.
    There are a lot of reports about this problem out there and adhoc solutions like 'clear the cache' or 'reinstall and drink ice tea' that do not work. It is obviously a file request error. It is all about finding out which server addresses get blocked by your computer.
    Solution: Go to your firewall and your Anti-virus-program. There must be a whitelist option. In Kaspersky, check the web-options, the banner-options and the firewall-options, because the all have whitelists. The following addresses have to be whitelisted:
    *.apple
    *.mzstatic.apple.com.akadns.net
    *.mzstatic.com.edgesuite.net
    *.da1.akamai.net
    *.itunes.apple.com
    se.itunes.apple.com
    upp.itunes.apple.com
    ax.init.itunes.apple.com
    xp.apple.com
    *.mzstatic.com
    client-api.itunes.apple.com
    www.apple.com.edgekey.net
    www.isg-apple.com.akadns.net
    Press Ctrl + R in the iTunes Shop then and browse throught the music sections. All images should be displayed correctly now.
    If not, there might be more Apple servers involved in your case. You can find them by running a DNS sniffing tool like the DNS query sniffer by Nirsoft or Wireshark.

    Phone restarting randomly could be loose battery. Tighten by putting a small strip of electrical tape on the back edge.
    THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN.

  • Image reading problem in servlet

    Image reading problem in servlet
    I am reading an image in servlet and writing it to ServletOutputStream
    The following code works fine unless I change the size of the byte array (for increasing download speed) from 8 to something like 128 or any other higher value
    If I change the value of byte array size the image does not get downloaded properly, I mean the quality of the image changes, it does not looks like the original imageURL url = new URL("http://www.mysite.com/images/img1.jpg");
    URLConnection con = url.openConnection();
    con.setUseCaches(false);
    BufferedInputStream in = new BufferedInputStream(con.getInputStream());
    BufferedOutputStream out = new BufferedOutputStream(response.getOutputStream());
    byte b[] = new byte[8];
    while(in.read(b) != -1)
         out.write(b);
         out.flush();               
    out.close();
    in.close();what do I change
    byte array size
    or use the constructor of BufferedInputStream with 2 parameter
    or use the constructor of BufferedOutputStream with 2 parameter
    or use flush outside while loop or what else

    Change your while loop to:
    int count;
    while((count = in.read(b)) != -1)
         out.write(b, 0, count);
         out.flush();               
    }The penultimate time read is called, it may not fill the entire byte array. You only want to write out however much was read into the array.
    For better performance, you should move the flush() outside of the loop too. BufferedOutputStream will flush automatically when its internal buffer is full.

  • Image refresh problem

    hi, i have an image inside an iframe that i'm trying to
    change upon the click of a button. i use the following code:
    <SCRIPT language="JavaScript" type="text/javascript">
    function swapImage(intImage){
    var
    imgs=["images/pic0.jpg","images/pic1.jpg","images/pic2.jpg","images/pic3.jpg","images/pic 4.jpg",
    "images/pic5.jpg"];
    parent.frames['cont'].document.getElementById('mgmnt_pic').src =
    imgs[intImage];
    alert(parent.frames['cont'].document.getElementById('mgmnt_pic').src)
    </SCRIPT>
    then in body:
    <p><a href="javascript:; "
    onclick="frames['cont'].swapImage(0);">Management
    Team</a></p>
    i know from the alert that it is changing the source of my
    image, the problem is that the image itself is not changing at all.
    has anyone experienced this before? what can i do to fix it?

    Hi,
    chk the link
    http://javascript.internet.com/miscellaneous/random-image.html
    shanthi

  • Publish Problems

    More Publish Problems!
    Ok... So now that I have been working on my sites when I publish I get "Publish Error" an unknown? Help... I am using iWeb 1.1.1 and thought that this word be an easy way for students to get access to some pod casts... Now what? This worked before using 1.1.1
    Sometimes it works and most of the time it will not publish? What can I do?
    Thanks
    David
    imac G5 and an older G5 + a Powerbook and an iBook   Mac OS X (10.4.7)  

    Oh my god I am not a lunatic idiot after all!
    I am currently in discussion with Apple Support for exactly the same problems as you guys, all I did was add a new video to my site. The first few times the update timed out as it was taking more than 30 minutes to upload (I am on broadband and the new page was only 7 meg). Then I got the ".Mac servers were busy please try later" message, then I got the "check your isp.." gubbins. Then when I tried again it said the update was successful but when I visited the site (via a number of different computers and networks) I either could not access the site at all, or it partly loaded, or the welcome page loaded correctly but when going to other pages I got nothing!
    I am currently waiting for Apple Support to " get back to me"
    MacBook 1.1 White 1.83ghz iBook 12 iBook 14   Mac OS X (10.4.7)   Remember, A good friend will bail you out of jail, but a best friend will help you bury the body!

  • Netinstall image  installation problem

    Hi, I'm new in MacOSX Server and trying to do image file with System Image Utility 10.6.2 - MacOS10.6 and additional packeges (MacOSXUpdCombo10.6.2, iWork'09, iLife'09) with "AddPackages and Post-Install Script". By making a image no problem but when I start the installation occurs the following problem.
    MacOs10.6 install correct but other programs added in "AddPackages and Post-Install Script" is not installed, and in Macintosh HD is created a folder named Install.76443 with locked directories.
    Where is the problem why the additional packages not installed.
    My SIU configuration is :
    Define Image Source: MacOSXInstallDVD
    Add Packages and Post-Install Scripts
    - MacOsx10.6.2. Update Combo
    - iLife'09.pkg
    - iWork'09.pkg
    Create image
    type: Netinstall
    Install Volume: Macintosh HD
    Save to: Documents
    Image Name: Netinstall of Mac OS X Install DVD
    Network Disk: Netinstall of Mac OS X Install DVD
    Image Index: 1533
    Description: Netinstall of Mac OS X Install DVD
    i want to create one image for all packages and updates and install it from network to all computers in my office.
    thanks

    I think this is covered in a different thread but, in short, the 10.6.2 update will fail to install on top of the 10.6 DVD. YMMV with the iLife & iWork packages as they may run pre-install scripts that will also cause them to fail.

  • RH8 image map problem

    I created an image map back in RoboHelp 6 and it worked perfectly. When I converted my project recently to RoboHelp 8, the image map pop-ups are not working correctly. I've checked the properties of the image map and they are correct. But the pop-up boxes do not display correctly. I'm going to attached an example of how the same one displays in RH6 and RH8 and a screen shot of my settings.
    Can anyone help me with this?

    After much trial and error testing around this image map issue, I cannot seem to find a fix for image maps within RoboHelp 8. No matter what I've tried (and it was a lot), nothing seems to fix the image map problem. Even creating a new image map on a new page with totally different info, pop up pages, image, etc. and turning OFF all breadcrumbs - the image map does not display correctly once generated (nor in preview).
    I have found a VERY TEDIOUS workaround for this (that I'm not happy about). If I take my original pop-up topic htm pages (9 of them) from my RoboHelp 6 project and the original eHlpDhtm.js file from RH6 and place them in my output Help file from RH8 (overwriting the RH8 with the RH6 files), then the image map works correctly.
    The eHlpDhtm.js file has many more scripts in it than just the image map triggers, so I'm not sure what all else I'm affecting when I'm fixing one problem (i.e. not sure how many more problems I'm creating at the same time when fixing one problem.)
    It's almost like the "breadcrumbs" feature in RH8 has broken the image maps feature in RH8.
    I'm still up for more suggestions as how to fix this if anyone has any ideas.

Maybe you are looking for