Image Quality Exporting to AVI

I have tried several ways to export to an avi file and the quality is horrible. Any suggestions - I have imported HD footage that looks fine in I Movie but not when it is a finished avi movie.

Why do you need the AVI container?
The AVI codec used by iMovie is the ancient Cinepak and it was designed for 320X240 dimensions.

Similar Messages

Poor Quality Export to AVI

Hi im a newcomer to Premier Pro and need some help in adjusting my settings for exporting my video.
The video in question is made up of 5 seperate videos (created from still jpegs with ImageVideoMachine at 1024x768 with 24fps and 1080HD Profile). When I view these videos seperately they are good quality and do not have any problems. However after i imported them to Premier Pro and added an audio track in the background and a small bit of text the quality after export is really bad in places.
I have tried lots of different settings in the export but just cant seem to get it right. The main problems that seem to occur is when the camera moves quickly from one scene to another and it seems to get very blurry and pixelated and sort of like half the scene is catching up (hope this makes sense!).
The entire video is only 4 and a half minutes long so I am not too worried about the size of the file. Any help would be greatly appreciated as im at a loss what to try next and the poor quality of the video takes away so much from my hard work in creating the presentation.
Hoping you can help
Alan

Just as further information for anyone who can help. These are the properties of one of the five .avi files I created using ImageVideoMachine. As I said these play at a good quality and without any pixelation of blurriness.
1.avi
Type: AVI Movie
File Size: 32.6 MB
Image Size: 1024 x 768
Pixel Depth: 1024
Frame Rate: 24.00
Total Duration: 00:00:41:21
Average Data Rate: 797 KB / second
Pixel Aspect Ratio: 1.0
AVI File details:
Contains 1 video track(s) and 0 audio track(s).
Video track 1:
Size is 32.58M bytes (average frame = 33.20K bytes)
There are 76 keyframes, 929 delta frames.
Frame rate is 24.00 fps
Frame size is 1024 x 768
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Now these are the properties of the best quality export from Premier Pro after I edited my video. Although this is my best quality export it is still very poor quality compared to the original videos I am using to create it.
Type: AVI Movie
File Size: 212.6 MB
Image Size: 1024 x 756
Pixel Depth: 1024
Frame Rate: 24.00
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:11:00
Average Data Rate: 867 KB / second
Pixel Aspect Ratio: 1.333
AVI File details:
Contains 1 video track(s) and 1 audio track(s).
Interleave: 1 : 24.00
Video track 1:
Size is 166.44M bytes (average frame = 36.10K bytes)
This movie appears to have DROPPED FRAMES
There are 28 keyframes, 5905 delta frames.
There are 91 empty frames.
Frame rate is 24.00 fps
Frame size is 1024 x 756
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Audio track 1:
Size is 45.95M bytes
Rate is 48000 samples/sec
Sample size is 16 bits
Hope this helps you to understand what im trying to do here.
Thanks again
Alan

How to export a fireworks file to flash while retaining image quality?

I created a banner for our website using fireworks cs3. Part of the banner has aimation (basically a slide show of 6 photos). I've tried to export the files by saving the frams to files, but when I do this, the image quality really gets bad. When I try to change the export settings and change the dither, everything but the last frame looks better and the last frame looks like a yellow color is splattered all over it....I've tried just saving the file as an .swf file but when I do so, the file doesn't work when I insert it into my web page, it doesn't work. Is there a better way to do this? Can I export as something else then import into flash and still retain my image quality? Thanks for any input and help!

How are you inserting the file?
Flash objects need to be placed in an object tag...as described here: http://kb2.adobe.com/cps/415/tn_4150.html

Export panel bridge cs5 - image quality only to 10

Hi
Is anyone else having problems with the image quality settings in the image options. It cannot seem to save the max setting of 12 it only save jpegs at 10.
Any suggestions, Thanks Andy

I had the exact same issue - except mine is limiting it to a maximum of 8
The workaround I found is to build the export profile exactly as you would like it - and let it pick whatever number it wants (8 or 10) - ignore the words of Low/High/Maximum - those just correlate to the 8 or 10 (or 12)
12 is the true maximum for the JPG export and once you run it - there is a noticeable file size increase and the images are a higher quality.
Once you have the profile built, go into the folder "Export Presets"
Macintosh HD > Users > YourUsername > Library > Application Support > Adobe > Bridge CS5 > Export Presets
Open up the file that matches the same name as what you created inside bridge
The file will likely open as an .xml file inside dreamweaver (or another XML editor)
find the line:
<imageQuality>8</imageQuality>
and set what the system set as an 8 (or a 10) to a 12
<imageQuality>12</imageQuality>
save the file and run the export again.
You will have what were 2-4MB JPG files becoming 8-12MB files with a quality of 12/Maximum
Hope that helps

!! Exporting SWF file in PDF reduces image quality.

Hello,
I have a file with many multi-state picture frames and buttons for them. I export it in pieces in SWF format, then I put the SWF's back in the document as a new layer and export as interactive PDF. Finally everything worked fine, except that PDF opens in a larger then normal zoom and when zooming in on pictures the quality is very poor I am guessing 72ppi at the intended zoom. I check the SWF file and see that its image quality is good when zoomed, so the problem is with the way the PDF has exported the SWF.
notes: I made sure the settings were to export at 300ppi and high image quality. When I take a single multi-state frame with its associated button and export to SWF then PDF the image quality is maintained.... however I have over 150 image frames, so I rather not export them individually. Please, please reply... any suggestions will be gratefully excepted.

edit your image in photoshop and experiment with various settings/size. there's no magic high quality small file size setting.
it's a trade-off. the higher the quality and the greater the image dimensions, the greater the file size. you have to decide where those are acceptable.

InDesignCC. How to keep image quality with exporting Interactive PDF?

Hello everyone, I'm using InDesign CC, I'm exporting a PDF that has PNG images, the problem is that I'm loosing the sharpness and the pureness in the images after exporting the file into PDF Interactive... the Settings I'm using for Image Handling are Compression: Automatic , JPEG Quality: Maximum, Resolution PPI: 300..
The file size is "Letter" with web Intent (792px x 612px) the images I'm using are big and have great quality, can anyone tell me how I export into PDF interactive without loosig images quality? I want to keep this pureness and sharpness in the images
Thanks in advance

It depends on the image. Best way for us to advise you is to open your image, then go to Image > Image Size and upload a screen capture of the Image Size box with the readings.
What you might have working against you is not enough pixels. Upsampling may just make it blurred. But we will see.
300 ppi is also not carved in stone, you may get away with 200 ppi depending on where you are sending it for printing.
And lastly, if you are paying a commercial printer to do this, it's best to consult with them and see what they can do.

Poor image quality on exported version

I am trying to export versions of my photos to a folder on my external drive. Every time I do this the resulting jpg is washed out and has poor resolution + a ton of noise. The resulting image is substantially lighter than the images in my aperture window, yet the histogram does not indicate that the images should be that light or washed out.
The images are all starting as RAW images. The export settings are for image quality 12, 300 dpi, sRGB, original jpg. I have onscreen proofing turned on and set to sRGB. My print lab said that the image quality could be 10, but when they looked so horrible I bumped them up.
I had Aperture for a long time before upgrading to Aperture 2 in March. From March to August I did not have any problems, so this is a more recent problem. I have not yet upgraded to Snow Leopard. Please help!!! Thanks!!!

Hi
a. make a DiskImage first and test this with Apple DVD-player.
(File menu and down "Make a DiskImage")
b. I only use streamingDV - no .m4v or like (may be it works - I don't know)
else
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
Yours Bengt W

Image quality in ePub exports from Pages

Something changed in ePub exports of images recently, or in iBooks' rendering of them. Now they are fuzzy when double-tapped and enlarged. Originally (at beginning of iBooks) they popped up looking quite crisp.
Oddly, I can still get crisp images with double-tap if I export an ePub file from Scrivener, and import it into iBooks—using the same images I'm used in Pages.
Does this make any sense? Have others noticed this change in image quality?

Just for the sake of clearness - InDesign 5.0 = InDesign CS3
InDesign CS5 = InDesign 7.0.x
I suppose you are talking about InDesign CS5 and not something older.

Crystal Reports Developer 11 - image quality in exported pdf file

I need to create a report with many images and export it to a pdf file. The image quality in the pdf file is slightly lower than in the rpt file. Can someone tell me how to increase the image quality in pdf file?
Thanks,
Hong

This document explains how to increase the image resolution when exporting:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30407084-c51d-2b10-1f81-813488350e6f
But it's for Crystal Enterprise 8.0, do you know if Crystal Reports 11 will work the same way?

IPhoto Slideshow Image Quality when export to IDVD

Aloha ... I have two issues that I am having problems with when I export to IDVD. My images look very fuzzy (originals are very high res and print quality images} when exported to iDVD and a DVD is made. Also in the show my vertical images look fine and fill the screen yet on iDVD they are made shorter/squatier and upper and lower parts of the original image are lost. The format is wide screen as is the show. I am using a LCD wide screen TV if that helps. Any ideas out there?

Welcome to the Apple Discussions. Are you cropping your photos to the 16:9 ratio before creating the widescreen slideshow in iPhoto and exporting them to iDVD for a widescreen project? Most digital camera images are in the 4:3 size ratio and don't convert well to the widescreen. Also check the aspect ratio that you're playing the dvd in as that can have an effect on how the slideshow looks.
Also remember that the images going to iDVD will be reduced to 640 x 480 (normal TV) and slightly larger for the widescreen version. So the pixel dimensions of the original image are not that relevant.
Happy Holidays
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Poor image quality in export to powerpoint

When I export a presentation to powerpoint format, the image quality of some elements is poor. Is there any way to preserve the image quality upon export?

Hello Ido:
Here is a paste of the last communication I had over email with Fergus:
When using photoshop, save the files a BMPs.
When .jpg image is inserted into Crystal Reports it is converted into bitmap format and as the
result of the conversion the report may loose some quality and scale.
When an image is saved as a .bmp, then there is no conversion required and thus the quality
of the image should be preserved.
Best practice: save the image with high resolution and required size as a .bmp format then
insert this image into Crystal Reports.
One more thing. Many people like to use jpg files as they are smaller than bmp files. However,
as far as Crystal Reports is concerned, this is inconsequential. The report file will be the same
size if a file is inserted as a jpg or a bmp. This is due to the jpg conversion to bmp Crystal Reports
does internally.
I am not sure if that helped, but Fergus did say that he was going to adjust his approach to how he handles the images. Hopefully that did help. And many thanks for bringing up the Fergus thread. I'll update it with the above info.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

SWF Export Image Quality Issue

I'm having an issue with a flip eFlyer myself and a colleague are working on in InDesign CS4 and need some input. We've created a eFlyer with page curl transitions and exported the swf file. When viewing the swf however, the page images vary in quality depending on whether the page curl is moused over or not. For example, the swf file resolution appears somewhat low without a mouseover, however when I mouseover the page curl in the corners, the resolution of the file noticeably improves (ie the image becomes clearer and more legible to read). Can't figure out why this is the case. Any thoughts?

I guess what´s happening "under the hood" is that flash player creates a bitmap copy of the page when ever user moused over, page curl effect is done with that bitmap, not with the actual page....
I think you have couple of ways to improve your document´s quality
1) prepare your images in photoshop, resize them to resolution 100ppi or even 120ppi, when you export your SWF, use Losless(do nothing) compression..
2) Or use high resolution images and export your SWF with larger size, for instance heigth of 1000px. Go to Adobe Marketplace:
http://www.adobe.com/cfusion/marketplace/index.cfm?event=marketplace.offering&offeringid=1 7503&marketplaceid=1
Downoad and install eDokcer, open eDocManager AIR-software and browse your SWF to it and hit Publish Locally button, eDocManager creates you a SWF with user interface and shrinks your large SWF to smaller, then resolution gets better.
You may use eDocManager for 3 days without license key... but that should be enough for making your flyer...
I´m not sure if either of those tricks really solves your problem, but I think that way you get better quality anyway...

Export to avi with the same quality. How ?!

Hello,
I'm using Adobe Premiere Pro CS5 to edit my video but i don't know how to export to avi file with the same quality...?!
In the previous version Premiere Pro CS3 i can export the video into avi with the same quality using Windows Media Video 9 Codec but in Premiere Pro CS5 i don't know how to do it...!!
Best Regards,
Q8Xbox

After you have downloaded and installed Lagarith and UT, reboot and just choose to Export to MS AVI, and then in the Compressor drop-down, choose the one that you want.
Good luck,
Hunt
I am agree with you Bill but how can we import these codecs into adobe premiere pro.Because it expects only .epr extension for importing presets.Is there any other way then let me know.Thanks in advance

Does Export Version reduces image quality?

Hi,
I got smaller file size when I "export version" at "original size". My master was jpeg of 5.1MB and I exported in jpeg format, I got 3.6MB. If I "export master", I do get 5.1MB. What does Aperture do to the jpeg image that reduces the file size?
Then I played around with "image quality", which is 10 by default. If I set it to 11, I got a file of 4.1 MB, still smaller than the original 5.1MB. Set it to 12 I got a file of 10.4MB. I am kind of confused. I guess the "image quality" relates to degree of jpeg compression, and a 12 setting means that Aperture compresses the jpeg image at a lower compression ratio than my camera? Does Aperture uncompress jpeg image and re-compress it when "export version"?
The bottom line is, how do I preserve image quality after adjustments? In other words, I would like to export at the same image quality as my original photo, or as close as possible (I assume Aperture reduces jpeg image quality a bit every time I apply adjustments to the image via export). Thanks much for your time.

Wanderzhuanyou wrote:
2) When I make adjustments in Aperture I actually work on the image Aperture produces out of the master file - which should be about 73MB in my computer memory as the size of the image is 2848 x 4272 and Aperture works in 16 bit.
Internally, Core Image (which Aperture uses) actually works in 32-bit, but your basic idea is right.
3) When I export, Apertures compresses this 73MB image (assume adjustments don't make much difference to the image size) to a jpeg file.
First the image will be reduced to the bit depth of your export preset. Image adjustments will make quite a difference to the final file size because areas of high definition detail and a large tonal range will both increase the file size for a given compression setting. So any sharpening, for example, will increase the file size.
As a test, export an image with no sharpening applied, then add some edge sharpening and export it again. You should see a noticeable difference in file sizes.
Correct?
Pretty much.
Ian

Lightroom export file size: why so small? How can I maximize image quality?

My image file sizes are much smaller after editing and exporting through Lightroom. Is it impossible to maintain original file size to preserve image quality? Will this smaller file size have negative impact on prints? Any help is appreciated!

Per Berntsen wrote:
My view on this is somewhat different ...
Jpgs should never be edited, except as a last resort. And it defeats the purpose of working with raw files if you export a jpg, and then edit it.
Agreed. Unfortunately there are many cameras that only output JPEG format files. The camera file (or any other original JPEG file) is your "raw" unedited file inside LR. If you need to send the file to someone else for further editing who doesn't have LR then Exporting with 100% Quality setting might make sense. I say "might" because it's still possible to get very good results using lower Quality setting JPEGs if you only re-save the file one (1) time after further editing. I agree that 16 bit, ProPhoto RGB, TIFF Export files are best for "critical" work and when using 'Edit in Photoshop' from LR.
I suggest taking a look at the JPEG compression image tests on Jeffrey Friedl's Blog. It's a wealth of information! LR's Quality settings range from 0% to 100% or 100 Quality levels. In reality there are only 13 Quality levels, which are the same as in PS.
JPEG QUALITY SETTINGS
Photoshop
Description
Lightroom
0
Low
0-7%
1
Low
8-15%
2
Low
16-23%
3
Low
24-30%
4
Low
31-38%
5
Med
39-46%
6
Med
47-53%
7
Med
54-61%
8
High
62-69%
9
High
70-76%
10
Max
77-84%
11
Max
85-92%
12
Max
93-100%
I use LR JPEG Quality settings of 77-84% for outside printing and LR 62-69% for web posting. I've yet to see any compression artifacts using these settings and I am a pixel-peeper!
Per Berntsen wrote:
If someone gives me a jpg to edit, I always save it as a tiff and convert to 16-bit, to minimize furhter deterioration. I realize that this will not be true 16-bit - no information is added to the image - but my impression is that it will withstand heavy editing better, and not end up with a comb-like histogram.
Why not simply Import the JPEG file into LR and do all your editing non-destructively? There's no need to convert the JPEG file to TIFF unless you need to use LR 'Edit in PS.' Lightroom uses a16 bit/color, ProPhoto RGB, Linear Gamma workspace for all images even when editing sRGB JPEG files.

Image Quality Exporting to AVI

Similar Messages

Maybe you are looking for