Image Raw CR2 Thumbnails

When I press File Open in my PSE 11 and look for Camera Raw files, they all show PSE 11 icon which makes it hard to find where is the image I am looking for? How do you make these CR2 ehumbnails to show the actual image?
Thanks

Simply select a folder containing raw images in Organizer (click the two yellow pins to see the full folder structure) to edit in camera raw. Then right-click a CR2 thumbnail and choose Edit with Photoshop Elements Editor.

Similar Messages

Importer dans Lightroom 4.4 des images Raw CR2 du Canon EOS 70D?

Bonjour, comment puis je importer dans Lightroom 4.4 des images Raw CR2 prises avec mon Canon EOS 70D?
Actuellement je n'obtiens qu'un message qui me dit "Aperçu non disponible pour ce fichier. Je croyais qu'Adobe avait mis à jour Lightroom depuis aout 2013.
Dois je systématiquement convertir le format en DNG ou JPG ou bien dois je acheter Lightroom 5 ?
Merci par avance.

http://blogs.adobe.com/crawlspace/2011/03/why-doesnt-my-version-of-photoshop-or-lightroom- support-my-camera.html
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

In Organiser, can the image filename be shown below the thumbnail (RAW CR2 files)?

In Organiser, is it possible to display the fiename below the image thumbnail (RAW CR2 files)?

Okay! Fixed now... after a little more digging, it turns out I wasn't putting the CR plug-in into the root folder....
Schoolboy error....
Thanks anyway!
Ben

Raw CR2 Images Deleted when loading into Bridge.

I was loading raw cr2 images from a compact card reader into Bridge. About half way through, the program stopped, I received an error message and then when I attempted to exit all the files were deleted from the card. Only the photos that had been loaded prior to the error message survived. The camera also has a SD slot and when I then attempted to load the jpeg photos saved to the SD card, the program froze while accessing and displaying the thumbnail images and would not load any content from the SD card. Any answers as to why Bridge failed and the photos were deleted. This is not the first time this has occured.

Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto:

RAW CR2 files from my Canon G11 not displaying thumbnails in SL finder. Why

I just loaded some CR2 RAW files from my Canon G11 last night. They displayed perfectly in iPhoto 09 but when I opened the folder the image files are in SL's finder I got icon placeholders which but no image icon display. I have loaded all the latest updates... Is SL no yet compatible with G11 RAW Cr2 files? Or do I not have something set up correctly as of yet?

HI,
Go to ~/Library/Preferences and move this file: com.apple.QuickLookDaemon.plist file to the Trash and restart your Mac.
Carolyn

Import screen cannot enlarge preview thumbnail from Canon G15 raw CR2 file

Lightroom 4.3 import screen does not seem to be able to enlarge for better viewing the preview thumbnail from a Canon G15 raw CR2 file?

HI,
I do not know the answer, but I would expect, that Lr only displays the embeded jpeg preview of your raw files. And I think, that the previews are small. You can use exiftool , exiftoolgui to see what's the dimension of your previews.

Importing RAW (CR2) images to iPhoto (7.1.1)

I'm having problems importing RAW (CR2) images to iPhoto (7.1.1) from my Canon Powershot G9. It imports the JPEGs with no problem, but says the following for RAW (CR2): "The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data".

Yellowfish
That would be because the G9 RAWs are not supported at this time.
Regards
TD

Is it possible Bridge ruins images while making thumbnails?

This morning I was reorganizing images.
I use Bridge to check the files.
I noticed when Bridge was making CR2 thumbnails several of them appeared stripped of some if not most of the pixels.
I opened one image in Camera raw and became afraid the image was actually now ruined.
In Canon Digital Professional, the thumbnail looks fine, but in Digital Pro Preview they also are ruined.
I went to my external backup to find the same images were ruined!
The thumbnails looked great as Bridge was regenerating them, but as soon as it was finished the images was stripped.
It seems logical the images were ruined when I downloaded them from the camera, otherwise they would be different in both files.
I usually download twice rather than copy one to the backup, but I do not remember now.
I am sure I have looked at these May 2014 images many times and they were fine!
Help! I am afraid to use Bridge to help with 6 years of photos!
Peter Burt
Windows 7, Custom built, up-to-date, Master Collection CS5.5

I want that will be like described below (as it works in another software for captioning):

New to Lightroom, problem importing raw CR2 files.

I am new to Lightroom and am having trouble importing my CR2 raw photo files. In the "import" section I select my SD card that contains the raw image files. All .jpeg files on the card show up as thumbnails but the CR2 files show "preview not available for this file." I select one of the CR2 thumbnails anyway, select a destination folder on my external hard drive and click "import." A window pops up that says, "this file is not recognized by the raw support format in Lightroom." I'm using Lightroom 4.4 and am working with a Windows Vista operating system (on an old, junky laptop). My camera is a Canon 70D and am shooting in RAW+JPEG. I also downloaded the Adobe .DNG converter 6.3 to try to convert the files before importing them into Lightroom and it is also not recognizing and importing my CR2 files. Not sure what to do at this point. Any suggestions?

I would recommend downloading DNG Converter 8.2 which is compatible with Vista.
The latest version 8.6 requires W7 or W8
Use this download link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5646

RAW CR2 files cause Bridge / PS CS3 to quit after Snow Leopard

OS: Snow Leopard Fresh Install
Camera: Canon XTi
Files: Canon RAW CR2
Issue: Access of ANY kind to a RAW file causes the app(s) to quit.
Detail: Everything was fine in Leopard but for various reasons I did a fresh install of Snow Leopard. Wiped the drive and installed clean. Installed iLife 09 and then did any Apple updates. I then installed CS3 and did all the Adobe updates (Almost 600 MB). Used PS for some graphic stuff with no issue and thought everything was good until today. Went to Bridge and simply tried to navigate to my RAW photos and it quit. Tried opening a RAW in PS... same thing. Checked the ACR version and is was 4.6 but I reinstalled anyway... same. So, I uninstalled the fresh copy of CS3 and reinstalled to be safe... same. OK, now it was testing time. Navigated to the RAW files in Finder and can view them fine. I can quick preview them, open them in preview etc, so the OS raw support is fine. Same thing happens just trying to open the file with PS CS3 since it open using RAW.
I removed the RAW plugin and Bridge stayed open fine and displayed the files as generic thumbs. Put the plugin back and it dies again.
In Leopard the RAW Prefs were set to store the settings in the RAW database instead of sidecar files and I have tried putting the database file in from the pre-snow leopard backup. No luck. I am totally stumped any any ideas are welcome. I am about to restore the Leopard image.
Thanks in advance,
Razz

Thanks for the idea Carolyn.
Unfortunately it did not fix it. I had tried it before and tried it again after your post. Thing is, it can't be the cache since the install of bridge has never been used. As soon as I load it and try to go view my files it quits. I would expect this from an upgraded SL install but an erase & install with fresh CS3 and all the OS and Adobe updates should be smooth. I really don't want to go back to Leopard but have to be able to mess with my photos. Why would removing the raw plugin stop the failure? It is 1 file, the correct version and fresh installed. Not sure what to do except maybe start over and yet that could still fail and takes a LONG time. I hate to upgrade to CS4 since I am not sure where the issues is.
Maybe install SL again over the top as an upgrade?
Any other ideas?
Thanks, Razz

Canon Raw (CR2) import issues, Windows Vista home premium

I can import JPEG files directly from my camera (EOS 400D)using Lightroom but I cannot import my raw CR2 files, for some reason Lighroom simply does not recognise that they are there.
I therefore use another program to import my Raw files onto my hard drive.
Once they are on my hard drive Lightroom will let me import my raw files.
My question is how do I get lightroom to import my raw CR2 files directly from my camera?

Plus multiple other good reasons/benefits of using a card-reader... such as...
No cord to accidently get pulled and camera to fall to floor, can download card and still go out and use camera, and can copy pictures to ANY computer without having special software installed... plus can use card as portable flash drive for other file types.
I personally don't allow Adobe to copy from my card even from a card-reader after their initial problems with 1.0... I copy all my files to a folder on HD, ensure all have been copied, then allow LR to Move and Import photos from that temporary holding location. This also allows me to do other things (like geotag the images) before I actually do my import into LR.

How do I import raw CR2 files from camera into LR5? I get an error message

I'm trying to import raw CR2 files from my camera into LR5. I get a message "Files appear to be unsupported or damaged." I know they are not damaged. Does LR5 support raw files? I can do this in Bridge and it converts them to dng files. This would be ideal for me if both could be done in LR5.

Not sure what the problem is if you say the files re recognized in Bridge? You could test the CR2 files by downloading the free Adobe DNG converter - latest version 8.6 (keep your CR2 originals as backups and for use in the camera manufactures software)and then import the DNG’s. It’s an extra step but I use it all the time to batch process into final folders.
Windows download (.exe file) click here DNG Converter 8.6
Mac download (.dmg file) click here DNG Converter 8.6
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

LR3 shows image as CR2 & JPG

I seem to have loaded images as CR2 + JPEG and I know they are both present in the folder as in Explorer I can see both. In LR3 I can only see the CR2 file.
How do I get to see my JPEG file in LR3 please. Or do I have to re-import them as separate files if I want to do that.

Preferences, General...check Treat JPEG files next to raw files as separate photos.
Otherwise LR just adds a reference to these files in the catalog but does not show them separately

Please Help, Very Frustrated - iPhoto 11 & Canon Raw(.cr2) files

I recently started shooting raw(.cr2) with Canon 6D (on the list), while on vacation of course.... while there I loaded all my images to my Ipad to save room, due to only having my 16gb memory card with me, yesterday I decided to take them off the ipad and store them in iPhoto where all my work is stored and back it up to my external harddrive, I have tried for 4 hoursto figure out why it won't upload to iPhoto 11, nothing works, it acts as if its uploading and then after 30 mins it says unrecognizable format(see screen capture below).
I have read several other different forums and similar questions all the way back to 2005 and nothing seems to help, I tried making a smart album, updating the software, but iPhoto will not recognize the pics. I did find one forum that said use Image Capture and do it that way, It worked to move them off the ipad but only to my extrenal hard drive with no image preview, saying it cannot open the file, all I eally want to do is have them load like all my other images into iPhoto which I use almost everyday and not have to go back to shooting jpeg along...PLEASE HELP any suggestions??

Thanks everyone...I tried and even downloaded the specific software released from Canon specific for Mac for my camera a Canon 6D... Nothing worked... IPhoto never would recognize the images....
BUT ..... in case someone else has this problem... I had to jump through hoops to figure it out... but finally with the help of several forums on here... I figured out a way to save my images and have them in a jpeg format to save for my memory folder for my daughter....so I did figure out a way to make it work...
If you transfer for images from camera(in raw format .cr2) to your ipad...... and cannot load them to iphoto like me....here is how to do it....
1. I searched my Mac, it comes with a software installed called "Image Capture" find it and load your pictures on
          your ipad to a folder on your desktop for easy finding.
2. Search Google and Download Program Called Rawker....
3. Open Rawker... go to File
                              a. Select Batch - Select source Location - Select your file you saved your images in
                              b. Select File Batch - Select Source Destination - either make a file on your desktop or
                                        select where you want your newly converted RAW/jpeg images to be placed
                              c. Select File batch and Start Batch...
4. After its done with the convert - you can import that new .jpeg folder of images to your iphoto
Bunch of crazy circles because I was told it was better to shoot in Raw .cr2 ... NOT ... It might be if you have the right program but I guess none of the ones I tried worked....
Until I find a better way I will just go back to shooting in jpeg fine.
Thanks again Everyone

Camera Raw CR2 import fail

Hi Guys
Doing some timelapse stuff at the moment and trying to use cr2 raw files with CS4 After Effects
I have Camera Raw plug-in 5.7
The .CR2 open fine in Photoshop but I get the good old error 45::35 cannot parse file when I try to open in After Effects. I'd normally check the colour space/format but in this case I'm using a 3rd party program that suggests a workflow which imports Raw CR2's into AE.
Is this possible to import CR2's into AE or do I have to convert everything to tiff's/jpegs first?
Cheers
Rob.

You have two alternatives:
(1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software) Try a differnt download (7.3 the latest) if DNG did not work before.
Windows download click here DNG Converter 7.3
Mac download click here DNG Converter 7.3
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Image Raw CR2 Thumbnails

Similar Messages

Maybe you are looking for