Image re-sizing issue!

Why can't I fix the size of my image in Photoshop? I try to make it, for example, 3.5" x 2.5", and have tried both the image size AND canvas size options. When I go and check the image size, it is 3.52" x 2.51", for instance. I've never encountered this before (using photoshop 12 years now), and don't know how to fix this. Any suggestions?

What is the resolution (pixel density) of the problem document? One place that you'll see it is in Image > Image Size dialogue. Maybe it is 85 ppi.

Similar Messages

  • How do I avoid sizing issues with a Bevel?

    I am designing a logo for a startup business, and a beveled filter really looks nice for this particular company. The client really likes what I came up with. The problem is the filter seems to cause sizing issues. Enlarging it is creating ugly pixelation. Is there a method for avoiding this, or can I simply not use a bevel?
    Thanks.

    In the preferences check scale strokes and effects

  • Orgchart export to image: special characters issue

    Hello,
    Using Orgchart Accelerated 2.01.
    We have an issue when exporting to image.  The issue happens when org unit name or attributes contains some special characters like é or ë (common in French).  In the jpg export, these characters are being replaced by some square characters.  In the preview and in the application, everything is displaying just fine.
    This doesn't happen for ppt export (pdf export still not functionning)
    Thanks,
    Laurent

    HI Laurent,
    This is quite unusual. As far as I am aware the OrgChart Accelerated solution only supports English at present. However, you should raise an OSS message via Service Marketplace as I would expect it to export these characters okay.
    Many thanks,
    Luke

  • Random Image PHP Scipt Issue

    I am using a
    PHP random image
    script on a site in which I have 2 different images on each
    templated page (random images throgh a site). The two images call
    to 2 different folders with the random image script in them (to get
    2 distinct images). Thus, 2 different random images. My issue is
    that it seems that most browsers at some point do not call for a
    new image but use what was there in the last page as it is the same
    name:
    http://ansano.com/asl/images/random/top/random_image.php
    or
    http://ansano.com/asl/images/random/bottom/random_image.php
    Any idea of how to force a browser to call the PHP script? Or
    how to change it so it works site wide?
    Thanks!!

    I've now been sitting looking for this for a while. I don't seem to be able to get it to work.
    Do I need to host to a folder first and then to the FTP server after?
    I don't seen to be able to find the new page (TEST PAGE) in the folder I used to publish the site to before I went online. Tried searching for it in finder but I don't get any results on (TESTPAGEfiles).
    I can see what you are talking bout I only publish to a local folder but I want to publish via the FTP option in iWeb.
    Thank you very much for helping me

  • Sizing Issue

    I'm doing a project for school and having some sizing issues
    with my pages. earlier in the project my partner and I had some
    major issues with style sheets and banner headings, but now
    whenever we preview a page it changes size. We have about 10 pages
    and when you change from page to page the main text area either
    becomes really big, shrinking the other text areas, or becomes
    extremely small letting the other text areas take over. Can anyone
    tell me what we are doing wrong and how to dix this problem?

    Can you post a link to these pages, please?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "luv4dirish" <[email protected]> wrote in
    message
    news:ekhd19$abb$[email protected]..
    > I'm doing a project for school and having some sizing
    issues with my
    > pages.
    > earlier in the project my partner and I had some major
    issues with style
    > sheets
    > and banner headings, but now whenever we preview a page
    it changes size.
    > We
    > have about 10 pages and when you change from page to
    page the main text
    > area
    > either becomes really big, shrinking the other text
    areas, or becomes
    > extremely
    > small letting the other text areas take over. Can anyone
    tell me what we
    > are
    > doing wrong and how to dix this problem?
    >

  • [svn:fx-trunk] 5367: The changes here are mostly fixing some sizing issues.

    Revision: 5367
    Author: [email protected]
    Date: 2009-03-17 15:26:35 -0700 (Tue, 17 Mar 2009)
    Log Message:
    The changes here are mostly fixing some sizing issues.
    For the FlashContainerPlaceholder, the first child is now MyFlexContentHolder, which extends mx.flash.FlexContentHolder but meets the invariant that it has 1 child and that child is FlexContentHolderThumbnail, which I?\226?\128?\153ve added as a swc to the project. I changed this by accident last time to refer to mx.flash.FlexContentHolder, when it should've referred to a concrete instance created by Flash from a swc. I also added a chrome of 151x151 to match the FlexContentHolderThumbnail since otherwise the container itself would have no chrome at all, and this let?\226?\128?\153s it size correctly.
    Also, for sizing, in a container, rather than sizing to the size of the chrome, I now size to the size of the FlexContentHolder thumbnail that all FlexContentHolder?\226?\128?\153s have. This means in ContainerMovieClip, I don?\226?\128?\153t need to override bounds anymore.
    ContainerMovieClip now implements IVisualElementContainer.
    Also, I fixed a resizing event bug in UIMovieClip where the resize event was getting dispatched more than once.
    QE Notes: -
    Doc Notes: -
    Bugs: SDK-19271, SDK-19788, SDK-19789
    Reviewer: Glenn
    tests: checkintests
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19271
    http://bugs.adobe.com/jira/browse/SDK-19788
    http://bugs.adobe.com/jira/browse/SDK-19789
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/ContainerMovieClip.as
    flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/FlexContentHolder.as
    flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/UIMovieClip.as
    flex/sdk/trunk/frameworks/projects/utilities/build.xml
    flex/sdk/trunk/frameworks/projects/utilities/src/FlashComponentPlaceholder.as
    flex/sdk/trunk/frameworks/projects/utilities/src/FlashContainerPlaceholder.as
    Added Paths:
    flex/sdk/trunk/frameworks/projects/utilities/libs/
    flex/sdk/trunk/frameworks/projects/utilities/libs/FlexContentHolderThumbnail.swc
    flex/sdk/trunk/frameworks/projects/utilities/src/MyFlexContentHolder.as

    Hello Everyone,
    We request you all to try your applications with http://labs.adobe.com/technologies/flashplatformruntimes/air3-5/
    Release Notes - http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/shared/air3-5_flashplayer11-5 _releasenotes.pdf
    Please let us know how it goes.
    -Thanks
    Pahup

  • Croping and sizing issues

    I have been using lightroom 4 for about 5 months.  But I am having issues with croping and sizing of pictures.  When I use the crop tool it does not always draw the picture in closer. I do shoot in RAW and not in JPEG.    I was wodering if there is a setting that I am not using or its not avaiable.  Also when I export out of lightroom4 and convert them from RAW to JPEG I have sizing issues depending on what size the customer orders.  I have tried to export them out at certain sizes but its still not correct.  The only way I have found to do it is going into photoshop and sizing them correctly but its very time consumeing .  Any help would be great!!

    You didn't tell us the desired output. All you said "...but its still not correct". What output are you trying to obtain?
    Also, what do you mean "When I use the crop tool it does not always draw the picture in closer"? Normally, you drag a corner (or corners) of the crop rectangle to crop tighter. Are you doing this? Is it not working? Explain.

  • [svn] 2913: Fix SWFLoader sizing issue (SDK-16497) Refactor some classes to try to fix ASDoc build.

    Revision: 2913
    Author: [email protected]
    Date: 2008-08-19 21:55:11 -0700 (Tue, 19 Aug 2008)
    Log Message:
    Fix SWFLoader sizing issue (SDK-16497) Refactor some classes to try to fix ASDoc build.
    Review: DJL
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16497
    Modified Paths:
    flex/sdk/branches/3.0.x/frameworks/projects/airframework/src/mx/managers/WindowedSystemMa nager.as
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/controls/SWFLoader.as
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/ISystemManager.as
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/SystemManager.as

    Thanks for sharing.

  • Card Image Number and Issuer Id Number

    Hi
    I want to get card image number and issuer id number of jcop card, I have tried GP command as below but getting error. Any help
    cm> /send 80CA0042
    => 80 CA 00 42 ...B
    (9096 usec)
    <= 6A 88 j.
    Status: Reference data not found

    hi Thanks for replying,
    Command you guys have suggested gives information as below, but it still does not gives issuer identification number and card image number. (unique to chip)
    IC Fabricator : 4070
    IC Type : 5072
    Operating System ID : 4051
    Operating System release date : 4204 (22.7.2004)
    Operating System release level : 2200
    IC Fabrication Date : 5049 (18.2.2005)
    IC Serial Number : 00606190
    IC Batch Identifier : 7113
    IC Module Fabricator : 4070
    IC Module Packaging Date : 0000
    ICC Manufacturer : 0000
    IC Embedding Date : 0000
    IC Pre-Personalizer : 0317
    IC Pre-Perso. Equipment Date : 1430
    IC Pre-Perso. Equipment ID : 36303631
    IC Personalizer : 0000
    IC Personalization Date : 0000
    IC Perso. Equipment ID : 00000000

  • Full Screen Slideshow image sizing issue

    Hi all,
    I am creating full screen slideshow for the first time.
    I have added the slideshow into the DEISGN mode and it all looks perfectly fine. However, once I am in PREVIEW or PREVIEW IN BROWSER mode the image is at fullscreen but it seems to be zoomed in or cropped tighter.
    The slideshow images are set to FILL FRAME PROPORTIONALLY. I have tried experimenting with different settings, page sizes, changing margins, changing header/footer guides, different image sizes etc... but no success.
    I am on a 27-inch (2560 x 1440) IMAC.
    help???
    I have attached two images to show what I mean. Notice in PREVIEW mode how the image appears to be tighter/cropped/magnified.
    Thanks

    Thanks Zac,
    So do you think I should change to Fit Content Proportionally?
    And then recrop my images so the aspect ratios match my browser window or the page dimensions in Muse?
    Sorry if these are stupid questions. I'm new to all this

  • Image Field - Scaling Issue

    Hi,
    I'm using Interactive Forms for priting sales orders. For each line item I display a small product image in an image field. For this image field I use the setting "Sizing - Scale Image Proportionally". If I use this form as a print form evrything works fine, the image is being scaled correctly. But if I use it as an interactive form (parameter /1BCDWB/DOCPARAMS-FILLABLE = 'X' ) the following occurs:
    The image is being resized to fit into the image field. It looks like using "Sizing - Scale Image to Fit Rectangle". The funny thing: If I use a default image for this field, it is being displayed correctly in the "Body Pages" tab, but not in the "PDF Preview". It's only being scaled proportionally if in the form properties the preview type is "Print Form" (or parameter /1BCDWB/DOCPARAMS-FILLABLE = ' ' ).
    In my eyes it looks like an ADS issue. But maybe somebody of you got an idea how I could fix that problem.
    Thanks & regards,
    Matthias

    hi,
            the process which u followed is correct but the thing is u hv forget to enable the check box called "embedded image"........ which will be present in the image properties.......... if u enable this check box then the image will be displayed in pdf preview.
                     I hope i solved the issue.
    Thnx,
    Vishnu

  • Odd character sizing issue

    I'm having an issue with some odd character sizing (ID cs6). The font I'm using is Avenir Next Condensed Demi Bold (although this issue is happening with other font weights within the same family). The image below shows the problem, the u is slighly larger than the other characters. Sometimes this goes away on-screen depending on how close I zoom in, but the real problem is that it's printing slightly larger too. It's the same paragraph style, and I don't have any character styles applied... any ideas on what is going on here, and more crucially, how to fix this?  Thanks kindly in advance for any help with this.

    Does this happen in other applications? How about AI, Word, LibreOffice, that sort of thing. Do you have another computer with Avenir installed you can test the font on?
    Mike

  • Image and Wireframe issue?

    I just received a call from a friend that is having an odd problem n FCP 5.1. For some reason, he iis unable to toggle from image+wirframe to image. When he sets the canvas to window, the wireframe is still visible.
    I had him trash the prefs, but it still has this issue.
    Also, he is having an issue with creating a bin inside a bin. when he right-clicks on the bin and selects new bin, the bin does not show up inside the other bin. This is by no means a crucial problem, but I didn't have an answer, so I fiigured I'd through it out there.
    g5 Dual 2Ghz   Mac OS X (10.3.7)  

    Has to set the canvas to 'image" not "window" or "fit to window" which is a sizing command.
    If he right clicks on a bin, then selects create new bin, that bin will be inside the selected bin.
    Jerry

  • Anyone know Disk Utility, Ignore Ownership, and disk image DL DVD issues?

    I am currently having issues with backup DVD's I burned using Disk Utility. I can put the dual layer DVD's in and the system reads them. When I try to pull a file off the Dual Layer DVD a circle with an X appears notifying me that I cannot copy the files to my desk top.
    When I check the DVD's permissions it reads Admin (me) read and write with the ignore ownership checkbox checked...which means I should be able to pull files off the DVD. The only way I can currently get information off the DVD is to duplicate the entire disk to a new folder by selecting the DVD while holding down the Cntrl key and selecting duplicate. I have had other issues with DVD's and disk images in Leopard....including having to eject either through disk utility or by selecting the image with the Cntrl key held down. Finder eject, keyboard eject, and the menu eject selections suddenly report that the disk is in use.
    The DVD's were burned by creating a dual layer dvd image through disk utility with the read/write option checked.
    After duplicating 2-3 disks, the system itself is unable to mount any more disks from the series of backups. When I look at disk utility it reads that the disk is not mountable. I have to restart my computer so the system can continue to read the backups.
    My Itunes disk backups are marked the same way (ignore ownership) with admin read/write privlages....I have no problem pulling files off these disks.
    I have tried both logging in as root and booting from an external drive...same problem. Is this some nasty Disk Utility bug? Is anyone else having bizarre permission related issues with Disk Utility and Disk Images.

    When you create the image in Disk Utility, did you
    change the 'Partitions' setting?
    If you leave it to read 'CD/DVD', it will create a ISO9660/UDF image.
    To be able to maintain permission and extended file attributes, you
    need to select 'GUID Partition Map'.
    I assume you used iTunes to create your music backup?
    It seems it creates the correct image type for you.
    Before sending this message, I actually created a single layer image,
    copied some files to it and gave additional permissions to other users on my system.
    Afterwards I copied the files to my Desktop, verifying that the attributes are still intact.
    Best regards
    (It took quite a while to burn this 4x DVD-RW Anyways, I hope I could help)

  • Saving images and catalogue issues.

    Hi,
    I have been using LR for a few months now and have watched countless tutorials (a lot of Adobe.tv) I am having major issues with staying on top of my numbering and filing system and really need some tips. I try and explain.
    When I first open the import box I have a look through and uncheck all the photos I have decided are no good and import the rest, I use the convert to DNG route. I also shoot in both JPEG and RAW, but I don't import the JPEGs, I use them for reference, I add generic keywords and rename with the date (I've still not decided on a naming convention yet)
    I then use the compare function and delete some photos that were otherwise identical, then I work through the photos and edit them. The trouble I have generally begins here. I am happy with the export box and choose my settings, but if I decide to edit any in photoshop I do it through LR and save it as a PSD. So now I have both the PSD and the DNG. If I try and rename them the numbering systemn goes to pot because there's a PSD in there. I also find occasionally that it renames each JPEG and associated DNG file seperately so 40 photos becomes 80
    Then I export my images only to discover the colour is over saturated so I need to re-edit/ import and then this adds to the confusion as I can't replace the current image as I need to figure out what the hell I need to correct!
    In short, I seem to be getting in quite a pickle! I'm not sure I've explained it very well. All I want to do is rename, edit,  export to show off to family and friends, without taking four hours to do eight photos
    Many thanks in advance for any help offered.

    Sorry you've been overlooked.
    Yes you are making things difficult for yourself.
    I recommend you watch some videos on AdobeTV to find out how to get the most from Lightroom with the smallest effort!!
    http://tv.adobe.com/product/lightroom/

Maybe you are looking for