Image reading in 10g reports

How can i read an image in 10g reports.
I just migrated reports and forms 6 to 10g. But images are not shown in reports.
Help me....
Thanks in advance...

I kept images in the same folder where the forms and reports kept.That usually doesn't matter. Reports source files and image files are usually in different folders. And, as I said before, this images folder has to be accessible from the server.
When you use a linked image in a report, Reports stores the whole path in the report definition. Open the report in Report Builder and look at the Source Filename property of the image item. Note that if you have them in a mapped drive (like H:\images) this will not work on the server if the Reports Server process has no H:\ drive.

Similar Messages

How to embed/show an image file (.jpeg or .jpg or .png) into a Oracle 10g report file (.rdf)

Hi All,
Morning , have an urgent requirement and need some guidance regards this.
we are currently having an existing Oracle 10g reports file (.rdf) lets say with name : Testing1.rdf .
The report output is getting generated in a pdf format . it opens up in a pdf format..
Now we want to embed an image file lets say : (logo.jpeg or logo.gif ) into the report output..at run time the image from the image file should show up in the report output.
Could someone please help as to how this could be achieved..and what approach we could follow for this...
with regards
Thanks as always !!

Hi All,
Morning ...just a follow up question to this original post : embedding the image files at runtime into an Oracle Report..
We were able to achieve this by entering the folder location where the image files are place on the server in the REPORTS_PATH env variable in the report.sh file.
Then we update this filename like file1.jpg into a table and from there we fetch this in the Oracle Reports data model directly.
for The layout field we select the option as Image.
All this works fine..
Issue : The resolution of the embedded image in the generated report output is very low ...means the image appears there but it is not very clearly visible ..is there any way we could improve the IMAGE RESOLUTION in the report output....?????
With regards

10g Reports open blank tab in Firefox

We're testing a 10g forms/reports application and the forms work fine in both IE and Firefox (Tested 6, 3.5 and 3.0 - same behavior) but when calling a 10g report from a form Firefox just opens a blank tab.
No error message. Doing a View Source on the tab shows no code at all.
The report opens fine (It's a PDF report so it either opens Acrobat within an IE tab, or in an stand-alone Acrobat window, depending on the Acrobat preferences) in Internet Explorer 6,7, and 8 but it's just Firefox where we're having this behavior.
Any ideas?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

10G Reports download in 11g

Hello All
I downloaded the sample reports for OIM in BI Publisher 10G but I want to use 11g based on better security capabilities. I was wondering if there is a way to import the 10g reports from the download into 11g? I found a couple documents on the ua.bat utility for upgrading repositories and catalogs, but I don't have a 10g install to copy any of the data from. Do you know if it is possible to install the 10g reports on the 11g server? I have the jdbc connection already setup, just need to get the report samples uploaded if possible. Any help you can give would be appreciated.
Thanks
Nick

Hello, I had the same question a while back. Response I got back from Oracle Support was that it's not possible to export a report from 10g and import into 11g. You either have to recreate the entire report or upgrade the repository.
Seems a bit short sighted to me from a migration standpoint, but that's what I know.

Oracle XE and 10g reports

Can this be done?
have installed XE, and have been using HTML DB. I am wanting more control with my reports, and I am much better with 10g reports developer than the built in html db reports.
I found this site, but I am stuck on "deploying the report" (#9/#10)
http://www.oracle.com/technology/products/database/htmldb/howtos/howto_integrate_oracle_reports.html
I coppied the rdf to $ORACLE_HOME/reports/samples/demo
then I ran "Start OC4J Instance"
But when I try to call the report in either firefox or IE like it tells me to, I can't get it to work. Page Cannot Be Found. (I replaced USER and PW too)
http://menzoberranzan:8080/reports/rwservlet?module=Invoice.rdf&userid=USER/PW@xe&destype=cache&desformat=pdf
Any suggestions as to how to do this without installing more on my computer, such as Oracle Application Server?
Thanks

No ideas about running an Oracle Report on an Express Edition DB so I can call it from a HTML DB application?

How do I display blob (image) in a Portal Report

I am using 9ias 10222 and portal 30983 and I have a table that stores an image as a blob and have a varchar field to store the mime type. I have created a form to upload the image and can then query the form to display the image.
How do I dislay the image in a Portal Report/Dynamic Page Component. I have followed note 68016.1 but the retrieve_img_data procedure does not work it gives a wwv-11230 error.
Any ideas? Any help would be appreciated.
Thanks
Belinda

Hi,
Can you display what code you used for this? I followed note 172045.1 and everything compiles properly but when I run the report, I just get a box with a red X in it, like it is not finding the picture. I ran the procedure that downloads the image and it works fine from there. Thanks.

How to run a 10g report from command line ?

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to address an report server and run a report?
Thank you,
Dmitri

Steps to take.
(1.) In command prompt type RWSERVER SERVER=repserver1 to star the rep server.
(2.) If you get "Javaw.exe The procedure entry point psoasyn could not be located in the dynamic link library orapls10.dll." error do one of the following
        (a.) Type the full name for the server. D:\OracleDevR2\bin\rwserver SERVER=repserver1
               or, if it does not work
        (b.) Add D:\OracleDevR2\bin to the system env. variable PATH
(3.) Start OC4j
(4.) Now you can access the jobs using URL like:
    http://192.161.11.143:8890/reports/rwservlet/showjobs?server=repserver1
      where 192.161.11.143 is your machine's IP address.

10g Reports issue with XML Data Source

Hi,
Has anybody ever encountered an issue with Oracle 10g report using an XML as the data source? What happens is, some of the values in the XML are printed to the wrong column.
One of the elements in our XML file is a complex type with 10 elements under it. The first 5 are picked up properly, but the last 6 are not. Elements #6 to #9 has a minimum occurence of 0. What happens is when element #6 is present, but #7 is, the value for element #7 is passed on to element #6.
The XSD and XSL files are both valid since the reports were working when we were still using 9i. There is no hidden logic in the report which might cause this issue to come up, i.e., the report just picks up the values from the XML and prints it to the appropriate columns.
Any help will be greatly appreciated.

XSD used
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
        
        <xs:element name="TradeDetail">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="TradeType"/>
                                <xs:element ref="TradeID"/>
                                <xs:element ref="TradeDate"/>
                                <xs:element ref="FundID"/>
                                <xs:element ref="FundName"/>
                                <xs:element ref="DollarValue" minOccurs="0"/>
                                <xs:element ref="UnitValue" minOccurs="0"/>
                                <xs:element ref="PercentageValue" minOccurs="0"/>
                                <xs:element ref="OriginalTradeID" minOccurs="0"/>
                                <xs:element ref="CancellationFlag"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        <xs:element name="Instruction">
                <xs:complexType>
                        <xs:sequence minOccurs="0">
                                <xs:element ref="TradeDetail" maxOccurs="unbounded"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="InterchangeHeader">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="Instruction"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="FundID" type="xs:string"/>
        <xs:element name="TradeType" type="xs:string"/>
        <xs:element name="TradeID" type="xs:string"/>
        <xs:element name="TradeDate" type="xs:string"/>
        <xs:element name="FundName" type="xs:string"/>
        <xs:element name="DollarValue" type="xs:decimal"/>
        <xs:element name="UnitValue" type="xs:decimal"/>
        <xs:element name="PercentageValue" type="xs:decimal"/>
        <xs:element name="OriginalTradeID" type="xs:string"/>
        <xs:element name="CancellationFlag" type="xs:string"/>
</xs:schema>
XML used
<?xml version = '1.0' encoding = 'UTF-8'?>
<InterchangeHeader xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="TradeInstruction.xsd">
   <Instruction>
      <TradeDetail>
         <TradeType>Purchase</TradeType>
         <TradeID>M000038290</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>ABN Fund</FundName>
         <DollarValue>2111.53</DollarValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>Redemption</TradeType>
         <TradeID>M000038292</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>AMRO Equity Fund</FundName>
         <UnitValue>104881.270200</UnitValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>ISPurchase</TradeType>
         <TradeID>M000038312</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>MLC0011AU</FundID>
         <FundName>Cash Fund</FundName>
         <OriginalTradeID>M000038311</OriginalTradeID>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
   </Instruction>
</InterchangeHeader>
XSLT used
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
        <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
        <xsl:template match="/">
                <InterchangeHeader>
                        <xsl:for-each select="InterchangeHeader/Instruction/TradeDetail">
                        <xsl:sort select="FundName"/>
                        <xsl:sort select="TradeDate"/>
                                <TradeDetail>
                                        <TradeType><xsl:value-of select="TradeType"/></TradeType>
                                        <TradeID><xsl:value-of select="TradeID"/></TradeID>
                                        <TradeDate><xsl:value-of select="TradeDate"/></TradeDate>
                                        <FundID><xsl:value-of select="FundID"/></FundID>
                                        <FundName><xsl:value-of select="FundName"/></FundName>
                                        <DollarValue><xsl:value-of select="DollarValue"/></DollarValue>
                                        <UnitValue><xsl:value-of select="UnitValue"/></UnitValue>
                                        <PercentageValue><xsl:value-of select="PercentageValue"/></PercentageValue>
                                        <OriginalTradeID><xsl:value-of select="OriginalTradeID"/></OriginalTradeID>
                                        <CancellationFlag><xsl:value-of select="CancellationFlag"/></CancellationFlag>
                                </TradeDetail>
                        </xsl:for-each>
                </InterchangeHeader>
        </xsl:template>
</xsl:stylesheet>

Image Quality in PDF Reports

Hi,
I have a rectangular JPG image which is holding the company logo. Most of the image's background is coloured white.
If I import the image into MS Word for example, when I print out the document the image is very high quality, sharp, etc.
When I import this image into an Oracle Reports via menu: insert / image, although it appears fine when looking at it in Report Builder on the 'Paper Layout', when I run the report the image in the output PDF has lost quality and when printed out, the white background (which should be white) prints as as a light shade of grey.
Does anyone know how to stop the loss of quality on the image and how to stop the background of the image printing as light grey ?
I'm running Report Builder 10.1.2.0.2.
Many Thanks, Mark

This document explains how to increase the image resolution when exporting:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30407084-c51d-2b10-1f81-813488350e6f
But it's for Crystal Enterprise 8.0, do you know if Crystal Reports 11 will work the same way?

How do I embed an image in a SSRS report?

I tried the instructions as per my book. The screenshot shows what I have done so far.
Now the book says click on the Report menu item and from the drop-down, click on Embedded
Imageswindow.
Where is this "report" menu item ?
The screenshot in the book only shows the popup window for that, but not how to get that pop up box. How do I do this ?
My project structure -

1. Open the report designer.
2. In the menu, click Report then click Embedded images.
3. In the Window click new Image.
4. Click Ok twice.
5. From toolbox drag and drop the image control.
6. Select the image control and show the properties Window.
7. Change the property value source = embedded.
8. In the value property select your image.

How to run a 10g report in quiet\batch mode

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
Thank you,
Dmitri

So the server (we will call it server1) you have "Redwood Cronacle 6.0.2" installed on has a C: drive and a D: drive. On the D: drive is installed Developer 6i (D:\ORADEV6I). You can install Developer Suite 10g also on the D: drive (D:\ORADEV10G for example). After that, setup Oracle iAS on server2. The good news is you have to change very little code. You can:
Not use the iAS server at all and use the following command (similar to how you are doing it now) in Redwood:
return 'D:\ORADEV10G\BIN\RWRUN.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' batch=yes paramform=no destype=file'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE';If you want to use the iAS server, you have to consider where the report will physicall exist. You can have it exist on the reports server or you can have it brought back to the client. If you bring it back to the client you will lose the ability to run this asynchronously (or in batch mode). You will have to play with some of these parameters to get it to work perfectly, but this should be a good start. These are examples of have the report results saved locally on server1...not server2:
1. Use rwclient to submit a report request
return 'D:\ORADEV10G\BIN\RWCLIENT.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';2. Use rwservlet to submit a report request
return 'D:\ORADEV10G\BIN\RWSERVLET.EXE'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=localfile'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';I would think that Cronacle 6.0.2 can submit a url as a job and wait for the results to be streamed back, so you could look into doing that also, in which case the url you would submit for the job would be something like:
return 'http://server2:7777/reports/rwservlet?'
||' userid=:USRPWD'
||' module='
||v_path||'\'||p_module
||' paramform=no destype=cache'
||' desformat=' || v_printer_driver
||' desname=:OUTFILE'
||' cmdfile=:CMDFILE errfile=:LOGFILE'
||' server=server2';

How to add image in web intelligence report?

Hi All,
I tried to add an image into web intelligence report by using the background image function available in the appearance settings. But when I tried to click on the button with ellipse, it does not show up a dialog box.
Do I miss out anything? Help is really needed.
Thanks
David Yee

Hi David,
You can try these steps to see if the Background image dialog box is appearing for a Free Standing Cell.
1. In Webi Java Report Panel, select Templates-> Free Standing Cells -> Formula and Text Cells-> Blank Cell
2. Click and drag the cell in the report.
3. Select the cell Properties
4. Under Text Format, click on the button in the Background Image property.
5. You can select the u201CImage from URLu201D or u201CImage from fileu201D.
6. If you are selecting u201CImage from URLu201D, change the u201CRead cell content asu201D property to u201CImage URLu201D under Display section in the Properties Window.
Hope this helps.

POJO How to include a Image/Picture into a report

Hi All,
the POJO Data Source support works fine but how can i include a image/picture into a Report ??
My Pojo contains a Blob and a byte[] but if i trag 'n' drop it onto the report design surface (myReport.rpt), C4E creates automatic fields for me but the Blob and the byte[] does not become available for reporting.
In the application i would like to move a image into the blob or into the byte[].
What is wrong ??
Thanks a lot for Your help
René
MY POJO
public class RhuPlakatData {
private String text11;
private Blob blob1;
private byte[] bytes;
public byte[] getBytes() {
return bytes;
public void setBytes(byte[] bytes) {
this.bytes = bytes;
public String getText11() {
return text11;
public void setText11(String text11) {
this.text11 = text11;
public Blob getBlob1() {
return blob1;
public void setBlob1(Blob blob1) {
this.blob1 = blob1;

Hi James
Unfortunately, I found no solution.
Did You found a solution??
Thanks for Your help
Greetings
René

Image Quality In Crystal Reports for Visual Studio 2010

I am using the new production release of Crystal Reports for Visual Studio 2010 and I am having an issue with image quality when adding an image to a crystal report.
The image itself is a .TIF file, and when opened in Windows, the quality of the image, which is mostly text, is very high. The image was created from a electronic PDF form and I intend to use this as a background for the crystal report, over which I will place data fields.
As soon as the image is added to the report you can see the degradation in quality in the design window and in the preview window within visual studio. The quality remains low when viewing the report in the WPF report viewer and when printing from this control.
I have ensured the "Retain Original Image Color Depth" option is checked but this has made no difference (the image is black and white anyway).
The image in the report has been left at its native size, no resizing at all. The image is 355KB in size if that's relevant.
Is there a reason the image looses quality when added to a report? Is it being compressed? More importantly, is there a way to make the image retain its native quality when adding it to a crystal report?
Thanks in advance.

The following image is the image I am trying to display. Although imageshack has converted it to a png, if you right click and save the image you can open it and zoom in with little image degradation.
http://img132.imageshack.us/i/j301.png
The following is a screen shot of how the tif file looks in the designer when zooming in:
http://img138.imageshack.us/i/j30lowquantity.jpg
The second image has lost its clarity and is unusable when printing.
I hope this helps.

Fonts issue on 10g Reports (Linux)

A while back I posted some questions about installing fonts on Linux RHEL 5.
Currently, I'm in process of upgrading Client/Server Forms/Reports from 6i on a Windows platforms to 10g forms/reports on a Linux RHEL5 platform. No database is installed on the server since we are using the TNSNames in the Network Admin to connect to the database.
I have been able to convert all forms and all reports to 10g. I had an issue with the Arial, Arial Narrow, and Courier New fonts not displaying in output when I generated a PDF file via the screen using the WEB.SHOW_DOCUMENT command. The fonts were translating. I was able to use Metalink Note 261879.1 and run the scripts to generate the AFM files and copy the TTF fonts to the appropriate directories. When I run the reports in 10g on Linux, those 3 fonts display just fine.
However, I have 3 other fonts (Monotype Sorts, Arial Unicode MS, and one of Barcode fonts) that I need to get working. I've worked with Oracle Support and I'll be honest, the steps they are telling me either aren't very clear or just flat out aren't right.
I've tried on Windows to use the ttf2pt1 program to generate the AFM files and copied those up to guicommon/tk/admin/AFM directory. I've copied the TTF file up to the associated directory. I've modified the uifont.ali directory to include the font, to no success.
Has anyone tried to move a Windows font up to Linux (Unix) and got it to work successfully? If so, could you provide me some steps? I've really been trying to get this to work and would do anything at this point to get it to work. I've got about 5 reports that use these 3 fonts and if I get them working, I'm done.
Please provide good detail, if possible. Oracle Support has just confused me more by providing notes to read and little tidbits here and there but haven't given me something that works in a straightforward manner.
Chris

My uifont.ali:
# Corrected uifont.ali - Matt Jernigan, Brown University, 31 MAR 2010
# Corrected [ Global ] aliasing standard Windows fonts.
# Corrected [ PDF:Subset ] Arial Unicode MS and less standard fonts.
# Note: These corrections do not necessarily match Oracle docs.
# 05 APR 2010 - Decided to subset Arial, Arial Narrow, Courier New,
# and Times New Roman in addition to Arial Unicode MS due to lack of
# support of UTF-8 in Oracle's PDF engine at this time. A charset
# conversion feature for specific fonts would be nice but nothing was
# found that was working such as arial.....=helvetica.....WE8ISO8859P1
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2004, Oracle. All rights reserved.
# $
# $Revision: tk2/admin/uifont.ali#0 $
# Copyright (c) 1994, 2004, Oracle. All rights reserved.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
#     <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
#                      <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
#     Styles                Numeric value
#       Plain                      0
#       Italic                     1
#       Oblique                    2
#       Underline                  4
#       Outline                    8
#       Shadow                    16
#       Inverted                  32
#       Overstrike                64
#       Blink                    128
#     Weights               Numeric value
#       Ultralight                 1
#       Extralight                 2
#       Light                      3
#       Demilight                  4
#       Medium                     5
#       Demibold                   6
#       Bold                       7
#       Extrabold                  8
#       Ultrabold                  9
#     Widths                Numeric value
#       Ultradense                 1
#       Extradense                 2
#       Dense                      3
#       Semidense                  4
#       Normal                     5
#       Semiexpand                 6
#       Expand                     7
#       Extraexpand                8
#       Ultraexpand                9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
#        Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
#    o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#MJJ# - Unix apparently lowercases what it reads from the Report
# and this case must be corrected.
# Arial = Helvetica will not work. Likely due to Oracle not supporting
# Regular as a weight such as Arial...Regular = Helvetica...Medium
#arial               = Arial
#"arial narrow"      = "Arial Narrow"
#"courier new"       = "Courier New"
#"times new roman"   = "Times New Roman"
"ms sans serif"         = "MS Sans Serif"
"microsoft sans serif" = "Microsoft Sans Serif"
# Note: I'm not providing AFM files for the Sans Serifs. I'll let
# the engine do with them as it sees fit. Best to avoid use of them.
# Arial Narrow is not really standard enough to be included here
# so limit use to clients that are known to have it installed.
# Consider moving Arial Narrow TTF's to the server and subsetting it.
#MJJ# - Alternative mappings to the above. The PDF engine appears to
# take liberty with mapping Courier New to Courier and Times New Roman
# to Times and, if wanted, these mappings appeared to correct this
# behavior. Note: not thoroughly tested. Changing the AFM files
# from CourierNewPS to CourierNew and such may produce more compatible
# results on Mac (just a guess) -- though leaving at Courier would be
# most compatible.
#arial..Italic.Bold..                = "Arial-BoldItalicMT"..Italic.Bold..
#arial...Bold..                      = "Arial-BoldMT"...Bold..
#arial..Italic...                    = "Arial-ItalicMT"..Italic...
#arial                               = "ArialMT"
#"courier new"..Italic.Bold..        = "CourierNewPS-BoldItalicMT"..Italic.Bold..
#"courier new"...Bold..              = "CourierNewPS-BoldMT"...Bold..
#"courier new"..Italic...            = "CourierNewPS-ItalicMT"..Italic...
#"courier new"                       = "CourierNewPSMT"
#"times new roman"..Italic.Bold..    = "TimesNewRomanPS-BoldItalicMT"..Italic.Bold..
#"times new roman"...Bold..          = "TimesNewRomanPS-BoldMT"...Bold..
#"times new roman"..Italic...        = "TimesNewRomanPS-ItalicMT"..Italic...
#"times new roman"                   = "TimesNewRomanPSMT"
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York"        = times
#geneva            = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC      = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS      = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC           = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS           = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman             = palatino
Script            = "itc zapf chancery"
FixedSys          = courier
System            = helvetica
# Mapping from Macintosh
"Avant Garde"     = "itc avant garde gothic"
# Mapping from Motif display
fixed             = courier
clean             = times
lucidatypewriter = courier
lucidabright      = times
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC      = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS      = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC           = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS           = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman             = palatino
Script            = "itc zapf chancery"
FixedSys          = courier
System            = helvetica
# Mapping from Macintosh
"Avant Garde"     = "itc avant garde gothic"
# Mapping from Motif display
fixed             = courier
clean             = times
lucidatypewriter = courier
lucidabright      = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica         = univers
times             = "cg times"
clean             = "antique olv"
fixed             = courier
lucida            = univers
lucidabright      = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal          = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis    = lucida.....jeuc
Script.....sjis   = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis   = lucida.....jeuc
.....sjis         = .....jeuc
# Mapping from MS Windows
Roman             = lucida
Script            = lucidabright
FixedSys          = fixed
System            = lucida
# Mapping from Macintosh
"Avant Garde"     = helvetica
"Bookman"         = times
#===============================================================
[ Display:CM ]     # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink          = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline.     = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold          = Bold
*..Underline      = Underline
*..Inverted       = Reverse
*                 = Plain                # The font of last resort
#===============================================================
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ]         - Used for font aliasing and Multibyte language support
# [ PDF:Embed ]   - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Subsetting entry. Entries
# in Font Subsetting will take precedence over the entries in Font Embedding
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold..       = "Arialb.ttf"
# helvetica..Italic...     = "Ariali.ttf"
# helvetica.....           = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
# Subsetting TrueType Collection fonts:
# Typically, a TTC font contains several fonts in one file. For example,
# the TTC file, msgothic.ttc consists of three fonts in the order -
# MS Gothic, MS PGothic and MS UI Gothic. To subset MS PGothic, the
# entry in the PDF:Subset section of uifont.ali would be:
# "MS PGothic" = "msgothic.ttc,1"
#MJJ# - Removed old subset mappings.
"arial unicode ms".....             = "ARIALUNI.TTF"
arial..Italic.Bold..                = "arialbi.ttf"
arial...Bold..                      = "arialbd.ttf"
arial..Italic...                    = "ariali.ttf"
arial                               = "arial.ttf"
"arial narrow"..Italic.Bold..       = "arialnbi.ttf"
"arial narrow"...Bold..             = "arialnb.ttf"
"arial narrow"..Italic...           = "arialni.ttf"
"arial narrow"                      = "arialn.ttf"
"courier new"..Italic.Bold..        = "courbi.ttf"
"courier new"...Bold..              = "courbd.ttf"
"courier new"..Italic...            = "couri.ttf"
"courier new"                       = "cour.ttf"
"times new roman"..Italic.Bold..    = "timesbi.ttf"
"times new roman"...Bold..          = "timesbd.ttf"
"times new roman"..Italic...        = "timesi.ttf"
"times new roman"                   = "times.ttf"
tahoma...Bold..                     = "tahomabd.ttf"
tahoma.....                         = "tahoma.ttf"
# Tahoma is a narrower adaption of Verdana more appropriate for print.
# Tahoma also has more charsets such as Arabic, Hebrew and Thai.
# No italics. Verdana and Tahoma were designed for screen anyhow.
#MJJ# Miscellaneous Notes:
# oracle::devlpar4:/u01/app/oracle/Forms1/fonts
# ARIALUNI.TTF arialbd.ttf   courbd.ttf    tahomabd.ttf verdana.ttf
# arial.ttf     cour.ttf      tahoma.ttf    times.ttf
# PFA's might be found here: /usr/lib/X11/fonts/type1
My screenprinter.ppd:
*% Corrected screenprinter.ppd - Matt Jernigan, Brown U, 31 MAR 2010
*% Reverted baseline from hp4mp6_1.ppd back to datap462.ppd (Oracle's
*% default). Added Arial, Arial Narrow, Arial Unicode MS, Courier New,
*% Tahoma, and Times New Roman.
*% 05 APR 2010 - ArialUnicodeMS wants to be before the other Arials
*% for some unknown reason, else it is not found for subsetting.
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
*OpenUI *Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1
*CloseGroup: InstallableOptions
*UIConstraints: *Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
    true
    dup    % potential password
    statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
    (WARNING : Cannot perform the exitserver command.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
    true
    dup    % potential password
    statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
    (WARNING : Cannot reset printer.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
(          ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {(                ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*%DefaultFont: Error
*DefaultFont: Courier
*Font ArialUnicodeMS: Special "(Version 1.01)" Special ROM
*Font ArialMT: Special "(Version 3.06)" Special ROM
*Font Arial-BoldMT: Special "(Version 3.06)" Special ROM
*Font Arial-BoldItalicMT: Special "(Version 3.06)" Special ROM
*Font Arial-ItalicMT: Special "(Version 3.06)" Special ROM
*Font ArialNarrow: Special "(Version 2.40)" Special ROM
*Font ArialNarrow-Bold: Special "(Version 2.40)" Special ROM
*Font ArialNarrow-BoldItalic: Special "(Version 2.40)" Special ROM
*Font ArialNarrow-Italic: Special "(Version 2.40)" Special ROM
*Font CourierNewPSMT: Special "(Version 2.90)" Special ROM
*Font CourierNewPS-BoldMT: Special "(Version 2.90)" Special ROM
*Font CourierNewPS-BoldItalicMT: Special "(Version 2.90)" Special ROM
*Font CourierNewPS-ItalicMT: Special "(Version 2.90)" Special ROM
*Font TimesNewRomanPSMT: Special "(Version 3.06)" Special ROM
*Font TimesNewRomanPS-BoldMT: Special "(Version 3.06)" Special ROM
*Font TimesNewRomanPS-BoldItalicMT: Special "(Version 3.06)" Special ROM
*Font TimesNewRomanPS-ItalicMT: Special "(Version 3.06)" Special ROM
*Font Tahoma: Special "(Version 3.15)" Special ROM
*Font Tahoma-Bold: Special "(Version 3.15)" Special ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
   count 1 gt
     exch dup str 6 94 getinterval cvs
     (/) print print (:) print
     FontDirectory exch known
     {(Yes)}{(No)} ifelse =
   {exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

Image reading in 10g reports

Similar Messages

Maybe you are looking for