Image Recovery
I tried Image recovery it is broken, if you want to see the worst case of image recovery, give it a try. Warning if you do try to restore for testing, make sure you enable administrator account before you start the recovery
works fine here - use it a lot actually. Ran the command to enable daily images. Works well and quite fast on SSD.
WBADMIN ENABLE BACKUP -addtarget:f: -schedule:00:15 -allCritical
Thank you for letting me know it works. I did discover what the issue was. I created a image only using the one drive. My system uses 2 storages spaces, one for windows and origin/games, the other for programs and users folders.
I am now going to try with the C:\ and D:\ again to see if I still get the disk is too small error.
Similar Messages
-
How can i perform system image recovery in windows 8.1 hp pavilion g6
recently i upgrade my hp pavilion g6 to 8.1pro..i need to create an system image file of my windows 8.1..so plz give me a detailed procedure...to store it on dvds/online hp backup recovery...
Is this image recovery working properly when my system got in big trouble???When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of the computer, inside the battery compartment, or on the BIOS startup/setup screen. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Please use Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is, on an external hard drive. You may also need to create a Windows "repair" disc. If your computer developes issues or you need to replace the hard drive, all you have to do is "restore" the image to the computer. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and restoring a "Windows - System Image Backup."
This process is not a system recovery and is different than using Window Restore or Refresh, or HP System Recovery.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
System Image Recovery from Network Drive - not found
Hello all!
I have been routinely backuping my OS and important files using Windows 7 backup on a NAS. It just so happened that I needed to re-image my OS drive and I got into the Windows 8 recovery boot sequence.
I booted from a windows 8 USB stick and Under the Advanced tools I selected the System Image Recovery and tried to look for the system image on the network path. Although the prompt said it was connecting to the network , the network share was
not found. the command prompt couldn't ping google.com and netsh wlan <SSID> command did not work in hopes of connecting to my local wifi.
Is there a way to connect to the wifi network where my NAS is connected to in order to re-image from the system image found on the NAS? Luckily , there was an older image on a separate local HDD that I could re-image from but I would prefer if
I could connect to the NAS during the recovery process.
Any help is greatly appreciated.Hi,
First, I have to say that in WinRE, http and wifi is not supported, that's why you cannot ping google and connect to wifi.
To access NAS, we have to make sure that your network connection is wired, and try to manually location the NAS via
\\IP address\...
I will check if the Windows 7 image backup can be restored in WinRE of Windows 8, and update your soon.
Edit:
I have tried this, and it appeared that to restore Windows 7 image backup on this computer from Windows 8 winRE is not supported.
see following error:
Kate Li
TechNet Community Support -
I am trying to find some image recovery software, I have looked at disk doctor, but it looks a bit shdey.
so basically i could do with a ligit version of something that works.
many thanksThis is what you should see:
Cisco 5500 Series Wireless LAN Controllers
•Field Recovery Image is upgraded from 7.0.112.21 to 7.6.101.1
•Bootloader is upgraded to 1.0.20
•Offline Field Diagnostics is upgraded from 0.9.28 to 0.9.35
•FPGA Revision version is upgraded to 1.7
•Environment Controller (MCU) Image version is upgraded to 1.8
•USB Console Revision version is upgraded to 2.2
The issue is if you were upgrading the FUS to 1.9.0.0, you should of had console access to see what was going on. Typically the primary will download the image and write to flash and then the secondary would upload the image from the primary and write to flash. The secondary would need to be rebooted first then the primary. If the sysinfo didn't match between the two, then you need to upload the FUS 1.9.0.0 and do it again. This is if your have AP SSO enabled. If it's an N+1 configuration, then you need to upload the FUS 1.9.0.0 to the WLC that hasn't had everything upgraded and perform the upgrade again. From the console you can choose what you want upgraded by skipping the upgraded that is up to date.
-Scott -
Factory reset and a minimized image recovery
Has anybody tried this?
I am considering doing a factory reset to restore my computer to the original, and...... then..... doing a minimized image recovery to remove all the trial applications and games software on C drive.
What else will I loose doing the minimized image recovery besides the trial applications software?
How about the programs (Cyber...etc.) that were included for the Blue ray drive..play and record that aren't trials.
Just what exactly are the trial applications ?
Any discussion or remarks on this ?
This laptop has 2 hard drives, C and D. HP's Dv7 Pavilion. Windows Home premium 64 bit O.S.
Thanks
Spring fever,mud season and computer cleaning go together.Thanks saturnwings,
My reasoning for the factory reset following with a MIR is because I have 2 physically separate hard drives installed in the laptop. Looking back, I probably should have done this when I first got it.
I did finally get a response from HP stating the only thing removed by doing a MIR was the games.They had no clue what was originally on the computer even with the ser.# ( software dejour?). I might want to take this with a bit of caution (my thought).
If I was only to do the MIR only affecting my C drive with the OS, to completely? remove the games, it would leave my D drive intact (I have 2 separate hard drives).
I loaded (installed) as many programs on to the second hard drive as I could because the C drive isn't that big. Because of this, I was worried about lingering problems, thinking I might need to reinstall programs to regain the links to the start menu.
I'm still trying to learn how to get these programs to the start menu if I was to leave the D drive intact (MIR). I am assuming there is a way?.
What I want is a setup where my computer is free of the games, and trial software, but with the programs I have installed and the data and documents I have from these programs.
Probably the easiest way is a new install of windows and wipe the slate clean,costing me $100 +/-, but I'd loose HP drivers, etc. which I've found aren't that easy to replace.
I am leaning toward a complete factory reset, MIR to remove what bloatware I can, followed by "uninstall software" from controll panel to get rid of what I haven't used in a year with a reinstall of my prefered programs and documents but I'm still looking for other suggestions or experiences.
Spring fever, mud season and computer cleaning coming together. -
I am trying to restore my laptop running windows 8 by using minimum image recovery however I have attempted this and it told me - "Restoration Incomplete". It only gives me the options "Save Log", "Details", and "Retry".
I have attached the log - if anyone can make sense of it!
Now all I have when I start my laptop is an Administrator account which is very basic and wont let me access many programs.
Also - when I start up my laptop it now reminds me that the image recovery was incomplete - when i click retry it takes me to a screen where i can start up one of two operating systems - "Windows 8" and "HP RM (ESP)", or i can use a device or troubleshoot.
All I want to do is restore my laptop to factory settings - but it didnt come with any sofware CD's. I am not sure how to proceed!
Spoiler (Highlight to read)
P2PP BurnBoot Check Failed
Possible Causes:
1. Yellow-Bang occured at Device Manager
2. Some silent-install failure of applications
3. Found failed at PININST_BBV
4. Found failed at PININST_BBV2
5. Found Memory Dump file
Suggestion:
1. Checking REGDEV_BB.LOG for drivers
2. Checking BBApps.log for applications
3. Checking MEMDUMP_BBV.log for memory dump file
Note[for ODM]:
If you know which component failed in preinstall process
after checking above files, please OTS it to the component owner.
Otherwise, suggest to contact TWN PDC NB-PreinPM or create PIN-Log and OTS it with OTS Category Image
[RegistryDevicesCheck]
Result=FAILED
FAILED DEVICE #0:
Description : USB-IF xHCI USB Host Controller
PNPDeviceID : ROOT\UOIP_BUS_DRIVER\0000
Code : [31]
[PININST_BBV]
PININST (Mini-FBI) starts at: 01:14:25 Thursday, January 17, 2013
[RunOnceThese_CMD#1]
LAUNCHED=> "C:\SYSTEM.SAV\UTIL\CLEANFBI.CMD"
START=> 01:14:28 Thursday, January 17, 2013
END=> 01:14:34 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunOnceThese_CMD#2]
LAUNCHED=> "CMD.exe /c MOVE c:\System.sav\FactoryUpdate\boot.wim c:\System.sav\2ndCap"
START=> 01:14:34 Thursday, January 17, 2013
END=> 01:14:35 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunOnceThese_CMD#3]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV1.CMD"
START=> 01:14:35 Thursday, January 17, 2013
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 01:14:46 Thursday, January 17, 2013
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#1]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\chipset_BBV.CMD"
START=> 01:14:47 Thursday, January 17, 2013
END=> 01:14:59 Thursday, January 17, 2013
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#2]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\IMEI_BBV.CMD"
START=> 01:14:59 Thursday, January 17, 2013
END=> 01:15:30 Thursday, January 17, 2013
RESULT=> Command finished in 31 seconds.
>==============================================================================
[RunThese_CMD#3]
LAUNCHED=> "CMD /C C:\System.sav\Util\TDC\MCPP\Drivers\VIDEO_S_BBV.CMD"
START=> 01:15:30 Thursday, January 17, 2013
END=> 01:15:36 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#4]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\VGA_Ix64_BBV.CMD"
START=> 01:15:36 Thursday, January 17, 2013
END=> 01:16:32 Thursday, January 17, 2013
RESULT=> Command finished in 56 seconds.
>==============================================================================
[RunThese_CMD#5]
LAUNCHED=> "CMD /C C:\System.sav\Util\TDC\MCPP\Drivers\VGA_A_BBV.CMD"
START=> 01:16:32 Thursday, January 17, 2013
END=> 01:17:38 Thursday, January 17, 2013
RESULT=> Command finished in 66 seconds.
>==============================================================================
[RunThese_CMD#6]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\AUDIO_S_BBV.CMD"
START=> 01:17:38 Thursday, January 17, 2013
END=> 01:18:54 Thursday, January 17, 2013
RESULT=> Command finished in 76 seconds.
>==============================================================================
[RunThese_CMD#7]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\SynTP_BBV.CMD"
START=> 01:18:54 Thursday, January 17, 2013
END=> 01:19:31 Thursday, January 17, 2013
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#8]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\LAN_S_BBV.CMD"
START=> 01:19:31 Thursday, January 17, 2013
END=> 01:20:07 Thursday, January 17, 2013
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#9]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\MISC_S_BBV.CMD"
START=> 01:20:07 Thursday, January 17, 2013
END=> 01:20:14 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#10]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\Fingerprint_S_BBV.CMD"
START=> 01:20:14 Thursday, January 17, 2013
END=> 01:21:15 Thursday, January 17, 2013
RESULT=> Command finished in 61 seconds.
>==============================================================================
[RunThese_CMD#11]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\TDCWIDI_BBV.CMD"
START=> 01:21:15 Thursday, January 17, 2013
END=> 01:21:16 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#12]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN_I8_BBV.CMD"
START=> 01:21:16 Thursday, January 17, 2013
END=> 01:23:58 Thursday, January 17, 2013
RESULT=> Command finished in 161 seconds.
>==============================================================================
[RunThese_CMD#13]
LAUNCHED=> "cscript.exe c:\SwSetup\powerset\sys_mem_check.vbs"
START=> 01:23:58 Thursday, January 17, 2013
END=> 01:23:59 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#14]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPePrint_BBV.CMD"
START=> 01:23:59 Thursday, January 17, 2013
END=> 01:24:10 Thursday, January 17, 2013
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#15]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\RST_BBV.CMD"
START=> 01:24:10 Thursday, January 17, 2013
END=> 01:24:11 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#16]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RaWLAN_BBV.CMD"
START=> 01:24:11 Thursday, January 17, 2013
END=> 01:24:12 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#17]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RaBtooth_BBV.CMD"
START=> 01:24:12 Thursday, January 17, 2013
END=> 01:24:19 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#18]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\QAWLAN_BBV.CMD"
START=> 01:24:19 Thursday, January 17, 2013
END=> 01:24:20 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#19]
LAUNCHED=> "CMD /C C:\System.sav\Util\TDC\MCPP\IRSTD_BBV.cmd"
START=> 01:24:20 Thursday, January 17, 2013
END=> 01:24:26 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#20]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPWBD_BBV.CMD"
START=> 01:24:26 Thursday, January 17, 2013
END=> 01:24:37 Thursday, January 17, 2013
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#21]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPDGF_BBV.CMD"
START=> 01:24:37 Thursday, January 17, 2013
END=> 01:24:53 Thursday, January 17, 2013
RESULT=> Command finished in 16 seconds.
>==============================================================================
[RunThese_CMD#22]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EFIDIAG_BBV.CMD"
START=> 01:24:53 Thursday, January 17, 2013
END=> 01:25:04 Thursday, January 17, 2013
RESULT=> Command finished in 11 seconds.
>==============================================================================
[RunThese_CMD#23]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Btooth_I_BBV.CMD"
START=> 01:25:04 Thursday, January 17, 2013
END=> 01:25:05 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#24]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPQL_BBV.CMD"
START=> 01:25:05 Thursday, January 17, 2013
END=> 01:25:21 Thursday, January 17, 2013
RESULT=> Command finished in 16 seconds.
>==============================================================================
[RunThese_CMD#25]
LAUNCHED=> "CMD.exe /c C:\System.sav\bbv\QFEList32.cmd"
START=> 01:25:21 Thursday, January 17, 2013
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 01:25:22 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#26]
LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"
START=> 01:25:22 Thursday, January 17, 2013
END=> 01:25:23 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#27]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\QABT4_BBV.CMD"
START=> 01:25:23 Thursday, January 17, 2013
END=> 01:25:25 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
PININST (Mini-FBI) exits at: 01:25:27 Thursday, January 17, 2013
[Mini-FBI]
Result=PASSED
[PININST_BBV2]
PININST (Mini-FBI) starts at: 01:27:00 Thursday, January 17, 2013
[RunOnceThese_CMD#1]
LAUNCHED=> "CMD.exe /c C:\System.sav\2ndCap\2ndCPrep.cmd"
START=> 01:27:02 Thursday, January 17, 2013
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 01:27:03 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunOnceThese_CMD#2]
LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV2.CMD"
START=> 01:27:03 Thursday, January 17, 2013
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 01:27:10 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#1]
LAUNCHED=> "cscript.exe c:\System.sav\Util\webcam.vbs"
START=> 01:27:11 Thursday, January 17, 2013
END=> 01:27:12 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#2]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSA_BBV.CMD"
START=> 01:27:12 Thursday, January 17, 2013
END=> 01:29:18 Thursday, January 17, 2013
RESULT=> Command finished in 126 seconds.
>==============================================================================
[RunThese_CMD#3]
LAUNCHED=> "c:\SwSetup\powerset\setactive.cmd"
START=> 01:29:18 Thursday, January 17, 2013
END=> 01:29:19 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#4]
LAUNCHED=> "c:\SwSetup\powerset\batterycap.cmd"
START=> 01:29:19 Thursday, January 17, 2013
END=> 01:29:25 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#5]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\IEHome_BBV.CMD"
START=> 01:29:25 Thursday, January 17, 2013
END=> 01:29:26 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#6]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPUC_BBV.CMD"
START=> 01:29:26 Thursday, January 17, 2013
END=> 01:29:33 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#7]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPREGM_BBV.CMD"
START=> 01:29:33 Thursday, January 17, 2013
END=> 01:29:34 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#8]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EngyStar_BBV.CMD"
START=> 01:29:34 Thursday, January 17, 2013
END=> 01:29:40 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#9]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EbayMetr_bbv.CMD"
START=> 01:29:40 Thursday, January 17, 2013
END=> 01:29:46 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#10]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CyberMS_BBV.CMD"
START=> 01:29:46 Thursday, January 17, 2013
END=> 01:30:37 Thursday, January 17, 2013
RESULT=> Command finished in 51 seconds.
>==============================================================================
[RunThese_CMD#11]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CyberLP_BBV.CMD"
START=> 01:30:37 Thursday, January 17, 2013
END=> 01:31:13 Thursday, January 17, 2013
RESULT=> Command finished in 36 seconds.
>==============================================================================
[RunThese_CMD#12]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BIOS_BG_BBV.CMD"
START=> 01:31:13 Thursday, January 17, 2013
END=> 01:31:34 Thursday, January 17, 2013
RESULT=> Command finished in 21 seconds.
>==============================================================================
[RunThese_CMD#13]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BIOS_BBV.CMD"
START=> 01:31:34 Thursday, January 17, 2013
END=> 01:31:35 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#14]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\YouCam_BBV.CMD"
START=> 01:31:35 Thursday, January 17, 2013
END=> 01:33:21 Thursday, January 17, 2013
RESULT=> Command finished in 106 seconds.
>==============================================================================
[RunThese_CMD#15]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WinLive_BBV.CMD"
START=> 01:33:21 Thursday, January 17, 2013
END=> 01:33:22 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#16]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Win8M_BBV.CMD"
START=> 01:33:22 Thursday, January 17, 2013
END=> 01:33:23 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#17]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Snfish_BBV.CMD"
START=> 01:33:23 Thursday, January 17, 2013
END=> 01:33:24 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#18]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SkypeM_BBV.CMD"
START=> 01:33:24 Thursday, January 17, 2013
END=> 01:33:31 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#19]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\P2Go_BBV.CMD"
START=> 01:33:31 Thursday, January 17, 2013
END=> 01:34:32 Thursday, January 17, 2013
RESULT=> Command finished in 61 seconds.
>==============================================================================
[RunThese_CMD#20]
LAUNCHED=> "CMD.exe /c C:\SWSetup\OCAMark\OCAMark.cmd"
START=> 01:34:32 Thursday, January 17, 2013
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 01:34:38 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#21]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\NTStudio_bbv.CMD"
START=> 01:34:38 Thursday, January 17, 2013
END=> 01:34:44 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#22]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\intelWD_bbv.CMD"
START=> 01:34:44 Thursday, January 17, 2013
END=> 01:35:35 Thursday, January 17, 2013
RESULT=> Command finished in 51 seconds.
>==============================================================================
[RunThese_CMD#23]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RM4Win.CMD"
START=> 01:35:35 Thursday, January 17, 2013
END=> 01:35:36 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#24]
LAUNCHED=> "cmd.exe /c c:\System.sav\bbv\defkey.cmd"
START=> 01:35:36 Thursday, January 17, 2013
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 01:35:42 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#25]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSWFK_BBV.CMD"
START=> 01:35:42 Thursday, January 17, 2013
END=> 01:35:48 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#26]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCOSE_bbv.cmd"
START=> 01:35:48 Thursday, January 17, 2013
END=> 01:35:54 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#27]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSPIP12_bbv.cmd"
START=> 01:35:54 Thursday, January 17, 2013
END=> 01:36:25 Thursday, January 17, 2013
RESULT=> Command finished in 31 seconds.
>==============================================================================
[RunThese_CMD#28]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPENVY7_BBV.CMD"
START=> 01:36:25 Thursday, January 17, 2013
END=> 01:36:26 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#29]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPENVY6_BBV.CMD"
START=> 01:36:26 Thursday, January 17, 2013
END=> 01:36:27 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#30]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCPhotM_BBV.CMD"
START=> 01:36:27 Thursday, January 17, 2013
END=> 01:36:28 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#31]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\DVD2D3D_BBV.CMD"
START=> 01:36:28 Thursday, January 17, 2013
END=> 01:38:15 Thursday, January 17, 2013
RESULT=> Command finished in 106 seconds.
>==============================================================================
[RunThese_CMD#32]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CPwrDD_BBV.CMD"
START=> 01:38:15 Thursday, January 17, 2013
END=> 01:42:01 Thursday, January 17, 2013
RESULT=> Command finished in 226 seconds.
>==============================================================================
[RunThese_CMD#33]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CPDD_BBV.CMD"
START=> 01:42:01 Thursday, January 17, 2013
END=> 01:42:57 Thursday, January 17, 2013
RESULT=> Command finished in 56 seconds.
>==============================================================================
[RunThese_CMD#34]
LAUNCHED=> "C:\System.sav\Util\WallpaperInstallBOM.cmd"
START=> 01:42:57 Thursday, January 17, 2013
END=> 01:42:58 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#35]
LAUNCHED=> "C:\SWSetup\Wallpaper\Disk1\Wallpaper.exe"
START=> 01:42:58 Thursday, January 17, 2013
Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....
Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....
END=> 01:43:04 Thursday, January 17, 2013
RESULT=> Command finished in 6 seconds.
>==============================================================================
[RunThese_CMD#36]
LAUNCHED=> "C:\System.sav\Util\wallpapertheme.cmd"
START=> 01:43:04 Thursday, January 17, 2013
END=> 01:43:05 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#37]
LAUNCHED=> "C:\System.sav\Util\wallpaperlogo.cmd"
START=> 01:43:05 Thursday, January 17, 2013
END=> 01:43:07 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#38]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\60NIS2013_bbv.CMD"
START=> 01:43:07 Thursday, January 17, 2013
END=> 01:43:08 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#39]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SymHPE_BBV.CMD"
START=> 01:43:08 Thursday, January 17, 2013
END=> 01:43:09 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#40]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HOSTEND.cmd"
START=> 01:43:09 Thursday, January 17, 2013
END=> 01:43:10 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#41]
LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"
START=> 01:43:10 Thursday, January 17, 2013
END=> 01:43:11 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#42]
LAUNCHED=> "C:\SYSTEM.SAV\FactoryUpdate\FU_6_097243_20120820_100A1\FU097243_BBV2.CMD"
START=> 01:43:11 Thursday, January 17, 2013
END=> 01:43:52 Thursday, January 17, 2013
RESULT=> Command finished in 41 seconds.
>==============================================================================
[RunThese_CMD#43]
LAUNCHED=> "C:\SYSTEM.SAV\FactoryUpdate\FU_6_097235_20120820_100A1\FU097235_BBV2.CMD"
START=> 01:43:52 Thursday, January 17, 2013
END=> 01:43:53 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#44]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSIOB_BBV.CMD"
START=> 01:43:53 Thursday, January 17, 2013
END=> 01:44:44 Thursday, January 17, 2013
RESULT=> Command finished in 51 seconds.
>==============================================================================
[RunThese_CMD#45]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSIOBPC_BBV.CMD"
START=> 01:44:44 Thursday, January 17, 2013
END=> 01:45:35 Thursday, January 17, 2013
RESULT=> Command finished in 51 seconds.
>==============================================================================
[RunThese_CMD#46]
LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\QABT4_BBV2.CMD"
START=> 01:45:35 Thursday, January 17, 2013
END=> 01:45:36 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#47]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\DTICON_BBV.CMD"
START=> 01:45:36 Thursday, January 17, 2013
END=> 01:45:37 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
[RunThese_CMD#48]
LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\HOTSTART_BBV.CMD"
START=> 01:45:37 Thursday, January 17, 2013
END=> 01:45:38 Thursday, January 17, 2013
RESULT=> Command finished in less than 1 seconds.
>==============================================================================
PININST (Mini-FBI) exits at: 01:45:41 Thursday, January 17, 2013
[Mini-FBI]
Result=PASSED
[C:\System.sav\Logs\BB\60NIS2013.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Audio_S.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BIOS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BIOS_BG.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\BTBHOST.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Btooth_I.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Chipset.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CPDD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CPwrDD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CyberLP.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\CyberMS.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\DTICON_BBV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\DVD2D3D.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EbayMetr.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EFIDIAG.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\EngyStar.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Fingerprint_S.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU097210.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU097235.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU097235_BBV2.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU097243.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU097243_BBV2.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\FU097293.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU097439.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU097480.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU097483.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU097612.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU097690.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU097713.log]
Result=PASSED
[C:\System.sav\Logs\BB\FU_CTO.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HOTSTART_BBV.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPCOSE.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPCPhotM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPDGF.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPENVY6.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPENVY7.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPePrint.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPQL.log]
Result=PASSED
[C:\System.sav\Logs\BB\HPREGM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSA.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSIOB.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSIOBPC.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSPIP12.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPSWFK.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPUC.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\HPWBD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IEHome.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IMEI.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\intelWD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\IRSTD.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\LAN_S.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Misc_S.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\NTStudio.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\NVVGA.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\OCAMark.log]
Result=PASSED
[C:\System.sav\Logs\BB\P2Go.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\PureOSSR.log]
Result=PASSED
[C:\System.sav\Logs\BB\QABT4.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\QABT4_2.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\QAWLAN.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\RaBtooth.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\RaWLAN.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\RM4Win.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\RST.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\SkypeM.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Snfish.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\SymHPE.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\TDCWIDI.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\TouchPad_S.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\VGA_Ix64.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Video_S.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WallpaperOk.log]
Result=PASSED
[C:\System.sav\Logs\BB\Win8M.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\WinLive.log]
Result=PASSED
[C:\System.sav\Logs\BB\WLAN_I8.LOG]
Result=PASSED
[C:\System.sav\Logs\BB\Youcam.log]
Result=PASSED
[LogFiles]
NumOfLogs=76.
[DumpFile]
Result=PASSED
[WinSAT]
Result=PASSED
[ 1:50:01.52] Sysprep_succeeded.tag does not exist ...
[ 1:50:01.52] ------------------------------------------------------------------------------------------
[ 1:50:01.52] BBVLast.cmd : [20x] CTOError.flg is detected at the end of BBV process...
[ 1:50:01.52] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[ 1:50:01.52] ------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------P2PP BurnBoot Check Failed------------------------------------------------------------------------------------------------------Possible Causes:1. Yellow-Bang occured at Device Manager2. Some silent-install failure of applications3. Found failed at PININST_BBV4. Found failed at PININST_BBV25. Found Memory Dump file------------------------------------------------------------------------------------------------------Suggestion:1. Checking REGDEV_BB.LOG for drivers2. Checking BBApps.log for applications3. Checking MEMDUMP_BBV.log for memory dump file------------------------------------------------------------------------------------------------------Note[for ODM]:If you know which component failed in preinstall processafter checking above files, please OTS it to the component owner.Otherwise, suggest to contact TWN PDC NB-PreinPM or create PIN-Log and OTS it with OTS Category Image------------------------------------------------------------------------------------------------------[RegistryDevicesCheck]Result=FAILEDFAILED DEVICE #0escription : USB-IF xHCI USB Host ControllerPNPDeviceID : ROOT\UOIP_BUS_DRIVER\0000Code : [31] [PININST_BBV]*************************************************************************************************************PININST (Mini-FBI) starts at: 01:14:25 Thursday, January 17, 2013*************************************************************************************************************[RunOnceThese_CMD#1]LAUNCHED=> "C:\SYSTEM.SAV\UTIL\CLEANFBI.CMD"START=> 01:14:28 Thursday, January 17, 2013END=> 01:14:34 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunOnceThese_CMD#2]LAUNCHED=> "CMD.exe /c MOVE c:\System.sav\FactoryUpdate\boot.wim c:\System.sav\2ndCap"START=> 01:14:34 Thursday, January 17, 2013END=> 01:14:35 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunOnceThese_CMD#3]LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV1.CMD"START=> 01:14:35 Thursday, January 17, 2013Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....END=> 01:14:46 Thursday, January 17, 2013RESULT=> Command finished in 11 seconds.>==============================================================================[RunThese_CMD#1]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\chipset_BBV.CMD"START=> 01:14:47 Thursday, January 17, 2013END=> 01:14:59 Thursday, January 17, 2013RESULT=> Command finished in 11 seconds.>==============================================================================[RunThese_CMD#2]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\IMEI_BBV.CMD"START=> 01:14:59 Thursday, January 17, 2013END=> 01:15:30 Thursday, January 17, 2013RESULT=> Command finished in 31 seconds.>==============================================================================[RunThese_CMD#3]LAUNCHED=> "CMD /C C:\System.sav\Util\TDC\MCPP\Drivers\VIDEO_S_BBV.CMD"START=> 01:15:30 Thursday, January 17, 2013END=> 01:15:36 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#4]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\VGA_Ix64_BBV.CMD"START=> 01:15:36 Thursday, January 17, 2013END=> 01:16:32 Thursday, January 17, 2013RESULT=> Command finished in 56 seconds.>==============================================================================[RunThese_CMD#5]LAUNCHED=> "CMD /C C:\System.sav\Util\TDC\MCPP\Drivers\VGA_A_BBV.CMD"START=> 01:16:32 Thursday, January 17, 2013END=> 01:17:38 Thursday, January 17, 2013RESULT=> Command finished in 66 seconds.>==============================================================================[RunThese_CMD#6]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\AUDIO_S_BBV.CMD"START=> 01:17:38 Thursday, January 17, 2013END=> 01:18:54 Thursday, January 17, 2013RESULT=> Command finished in 76 seconds.>==============================================================================[RunThese_CMD#7]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\SynTP_BBV.CMD"START=> 01:18:54 Thursday, January 17, 2013END=> 01:19:31 Thursday, January 17, 2013RESULT=> Command finished in 36 seconds.>==============================================================================[RunThese_CMD#8]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\LAN_S_BBV.CMD"START=> 01:19:31 Thursday, January 17, 2013END=> 01:20:07 Thursday, January 17, 2013RESULT=> Command finished in 36 seconds.>==============================================================================[RunThese_CMD#9]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\MISC_S_BBV.CMD"START=> 01:20:07 Thursday, January 17, 2013END=> 01:20:14 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#10]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\Fingerprint_S_BBV.CMD"START=> 01:20:14 Thursday, January 17, 2013END=> 01:21:15 Thursday, January 17, 2013RESULT=> Command finished in 61 seconds.>==============================================================================[RunThese_CMD#11]LAUNCHED=> "C:\system.sav\Util\TDC\MCPP\TDCWIDI_BBV.CMD"START=> 01:21:15 Thursday, January 17, 2013END=> 01:21:16 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#12]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WLAN_I8_BBV.CMD"START=> 01:21:16 Thursday, January 17, 2013END=> 01:23:58 Thursday, January 17, 2013RESULT=> Command finished in 161 seconds.>==============================================================================[RunThese_CMD#13]LAUNCHED=> "cscript.exe c:\SwSetup\powerset\sys_mem_check.vbs"START=> 01:23:58 Thursday, January 17, 2013END=> 01:23:59 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#14]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPePrint_BBV.CMD"START=> 01:23:59 Thursday, January 17, 2013END=> 01:24:10 Thursday, January 17, 2013RESULT=> Command finished in 11 seconds.>==============================================================================[RunThese_CMD#15]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Drivers\RST_BBV.CMD"START=> 01:24:10 Thursday, January 17, 2013END=> 01:24:11 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#16]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RaWLAN_BBV.CMD"START=> 01:24:11 Thursday, January 17, 2013END=> 01:24:12 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#17]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RaBtooth_BBV.CMD"START=> 01:24:12 Thursday, January 17, 2013END=> 01:24:19 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#18]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\QAWLAN_BBV.CMD"START=> 01:24:19 Thursday, January 17, 2013END=> 01:24:20 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#19]LAUNCHED=> "CMD /C C:\System.sav\Util\TDC\MCPP\IRSTD_BBV.cmd"START=> 01:24:20 Thursday, January 17, 2013END=> 01:24:26 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#20]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPWBD_BBV.CMD"START=> 01:24:26 Thursday, January 17, 2013END=> 01:24:37 Thursday, January 17, 2013RESULT=> Command finished in 11 seconds.>==============================================================================[RunThese_CMD#21]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPDGF_BBV.CMD"START=> 01:24:37 Thursday, January 17, 2013END=> 01:24:53 Thursday, January 17, 2013RESULT=> Command finished in 16 seconds.>==============================================================================[RunThese_CMD#22]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EFIDIAG_BBV.CMD"START=> 01:24:53 Thursday, January 17, 2013END=> 01:25:04 Thursday, January 17, 2013RESULT=> Command finished in 11 seconds.>==============================================================================[RunThese_CMD#23]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Btooth_I_BBV.CMD"START=> 01:25:04 Thursday, January 17, 2013END=> 01:25:05 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#24]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPQL_BBV.CMD"START=> 01:25:05 Thursday, January 17, 2013END=> 01:25:21 Thursday, January 17, 2013RESULT=> Command finished in 16 seconds.>==============================================================================[RunThese_CMD#25]LAUNCHED=> "CMD.exe /c C:\System.sav\bbv\QFEList32.cmd"START=> 01:25:21 Thursday, January 17, 2013Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....END=> 01:25:22 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#26]LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"START=> 01:25:22 Thursday, January 17, 2013END=> 01:25:23 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#27]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\QABT4_BBV.CMD"START=> 01:25:23 Thursday, January 17, 2013END=> 01:25:25 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================*************************************************************************************************************PININST (Mini-FBI) exits at: 01:25:27 Thursday, January 17, 2013*************************************************************************************************************[Mini-FBI]Result=PASSED[PININST_BBV2]*************************************************************************************************************PININST (Mini-FBI) starts at: 01:27:00 Thursday, January 17, 2013*************************************************************************************************************[RunOnceThese_CMD#1]LAUNCHED=> "CMD.exe /c C:\System.sav\2ndCap\2ndCPrep.cmd"START=> 01:27:02 Thursday, January 17, 2013Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....END=> 01:27:03 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunOnceThese_CMD#2]LAUNCHED=> "CMD.exe /c C:\System.sav\Util\Pre-BBV2.CMD"START=> 01:27:03 Thursday, January 17, 2013Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....END=> 01:27:10 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#1]LAUNCHED=> "cscript.exe c:\System.sav\Util\webcam.vbs"START=> 01:27:11 Thursday, January 17, 2013END=> 01:27:12 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#2]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSA_BBV.CMD"START=> 01:27:12 Thursday, January 17, 2013END=> 01:29:18 Thursday, January 17, 2013RESULT=> Command finished in 126 seconds.>==============================================================================[RunThese_CMD#3]LAUNCHED=> "c:\SwSetup\powerset\setactive.cmd"START=> 01:29:18 Thursday, January 17, 2013END=> 01:29:19 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#4]LAUNCHED=> "c:\SwSetup\powerset\batterycap.cmd"START=> 01:29:19 Thursday, January 17, 2013END=> 01:29:25 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#5]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\IEHome_BBV.CMD"START=> 01:29:25 Thursday, January 17, 2013END=> 01:29:26 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#6]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPUC_BBV.CMD"START=> 01:29:26 Thursday, January 17, 2013END=> 01:29:33 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#7]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPREGM_BBV.CMD"START=> 01:29:33 Thursday, January 17, 2013END=> 01:29:34 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#8]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EngyStar_BBV.CMD"START=> 01:29:34 Thursday, January 17, 2013END=> 01:29:40 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#9]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\EbayMetr_bbv.CMD"START=> 01:29:40 Thursday, January 17, 2013END=> 01:29:46 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#10]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CyberMS_BBV.CMD"START=> 01:29:46 Thursday, January 17, 2013END=> 01:30:37 Thursday, January 17, 2013RESULT=> Command finished in 51 seconds.>==============================================================================[RunThese_CMD#11]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CyberLP_BBV.CMD"START=> 01:30:37 Thursday, January 17, 2013END=> 01:31:13 Thursday, January 17, 2013RESULT=> Command finished in 36 seconds.>==============================================================================[RunThese_CMD#12]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BIOS_BG_BBV.CMD"START=> 01:31:13 Thursday, January 17, 2013END=> 01:31:34 Thursday, January 17, 2013RESULT=> Command finished in 21 seconds.>==============================================================================[RunThese_CMD#13]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\BIOS_BBV.CMD"START=> 01:31:34 Thursday, January 17, 2013END=> 01:31:35 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#14]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\YouCam_BBV.CMD"START=> 01:31:35 Thursday, January 17, 2013END=> 01:33:21 Thursday, January 17, 2013RESULT=> Command finished in 106 seconds.>==============================================================================[RunThese_CMD#15]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\WinLive_BBV.CMD"START=> 01:33:21 Thursday, January 17, 2013END=> 01:33:22 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#16]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Win8M_BBV.CMD"START=> 01:33:22 Thursday, January 17, 2013END=> 01:33:23 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#17]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\Snfish_BBV.CMD"START=> 01:33:23 Thursday, January 17, 2013END=> 01:33:24 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#18]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SkypeM_BBV.CMD"START=> 01:33:24 Thursday, January 17, 2013END=> 01:33:31 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#19]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\P2Go_BBV.CMD"START=> 01:33:31 Thursday, January 17, 2013END=> 01:34:32 Thursday, January 17, 2013RESULT=> Command finished in 61 seconds.>==============================================================================[RunThese_CMD#20]LAUNCHED=> "CMD.exe /c C:\SWSetup\OCAMark\OCAMark.cmd"START=> 01:34:32 Thursday, January 17, 2013Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....END=> 01:34:38 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#21]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\NTStudio_bbv.CMD"START=> 01:34:38 Thursday, January 17, 2013END=> 01:34:44 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#22]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\intelWD_bbv.CMD"START=> 01:34:44 Thursday, January 17, 2013END=> 01:35:35 Thursday, January 17, 2013RESULT=> Command finished in 51 seconds.>==============================================================================[RunThese_CMD#23]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\RM4Win.CMD"START=> 01:35:35 Thursday, January 17, 2013END=> 01:35:36 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#24]LAUNCHED=> "cmd.exe /c c:\System.sav\bbv\defkey.cmd"START=> 01:35:36 Thursday, January 17, 2013Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....END=> 01:35:42 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#25]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSWFK_BBV.CMD"START=> 01:35:42 Thursday, January 17, 2013END=> 01:35:48 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#26]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCOSE_bbv.cmd"START=> 01:35:48 Thursday, January 17, 2013END=> 01:35:54 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#27]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSPIP12_bbv.cmd"START=> 01:35:54 Thursday, January 17, 2013END=> 01:36:25 Thursday, January 17, 2013RESULT=> Command finished in 31 seconds.>==============================================================================[RunThese_CMD#28]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPENVY7_BBV.CMD"START=> 01:36:25 Thursday, January 17, 2013END=> 01:36:26 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#29]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPENVY6_BBV.CMD"START=> 01:36:26 Thursday, January 17, 2013END=> 01:36:27 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#30]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPCPhotM_BBV.CMD"START=> 01:36:27 Thursday, January 17, 2013END=> 01:36:28 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#31]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\DVD2D3D_BBV.CMD"START=> 01:36:28 Thursday, January 17, 2013END=> 01:38:15 Thursday, January 17, 2013RESULT=> Command finished in 106 seconds.>==============================================================================[RunThese_CMD#32]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CPwrDD_BBV.CMD"START=> 01:38:15 Thursday, January 17, 2013END=> 01:42:01 Thursday, January 17, 2013RESULT=> Command finished in 226 seconds.>==============================================================================[RunThese_CMD#33]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\CPDD_BBV.CMD"START=> 01:42:01 Thursday, January 17, 2013END=> 01:42:57 Thursday, January 17, 2013RESULT=> Command finished in 56 seconds.>==============================================================================[RunThese_CMD#34]LAUNCHED=> "C:\System.sav\Util\WallpaperInstallBOM.cmd"START=> 01:42:57 Thursday, January 17, 2013END=> 01:42:58 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#35]LAUNCHED=> "C:\SWSetup\Wallpaper\Disk1\Wallpaper.exe"START=> 01:42:58 Thursday, January 17, 2013Pre-Process=> This is 32bit OS. Skip disabling WOW64 File Redirection....Post-Process=> This is 32bit OS. Skip enabling WOW64 File Redirection....END=> 01:43:04 Thursday, January 17, 2013RESULT=> Command finished in 6 seconds.>==============================================================================[RunThese_CMD#36]LAUNCHED=> "C:\System.sav\Util\wallpapertheme.cmd"START=> 01:43:04 Thursday, January 17, 2013END=> 01:43:05 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#37]LAUNCHED=> "C:\System.sav\Util\wallpaperlogo.cmd"START=> 01:43:05 Thursday, January 17, 2013END=> 01:43:07 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#38]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\60NIS2013_bbv.CMD"START=> 01:43:07 Thursday, January 17, 2013END=> 01:43:08 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#39]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\SymHPE_BBV.CMD"START=> 01:43:08 Thursday, January 17, 2013END=> 01:43:09 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#40]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HOSTEND.cmd"START=> 01:43:09 Thursday, January 17, 2013END=> 01:43:10 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#41]LAUNCHED=> "C:\System.sav\Util\_RTEND.CMD"START=> 01:43:10 Thursday, January 17, 2013END=> 01:43:11 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#42]LAUNCHED=> "C:\SYSTEM.SAV\FactoryUpdate\FU_6_097243_20120820_100A1\FU097243_BBV2.CMD"START=> 01:43:11 Thursday, January 17, 2013END=> 01:43:52 Thursday, January 17, 2013RESULT=> Command finished in 41 seconds.>==============================================================================[RunThese_CMD#43]LAUNCHED=> "C:\SYSTEM.SAV\FactoryUpdate\FU_6_097235_20120820_100A1\FU097235_BBV2.CMD"START=> 01:43:52 Thursday, January 17, 2013END=> 01:43:53 Thursday, January 17, 2013RESULT=> Command finished in less than 1 seconds.>==============================================================================[RunThese_CMD#44]LAUNCHED=> "C:\System.sav\Util\TDC\MCPP\HPSIOB_BBV.CMD"START=> 01:43:53 Thursday, January 17, 2013END=> 01:44:44 Thursday, January 17, 2013RESULT=> Command finished in 51 seconds.>==============================================================================[RunThese_CThis is WiDi. You can download latest version from Intel.
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22016&ProdId=3227&lang=eng -
I was planning on doing a System Recovery when i saw this new option called "Minimized Image Recovery". My question is what programs/software will i start with when i do it? Will i start with Internet explorer,Norton,etc..? Will this delete my recovery partition?
See this page.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02638587&cc=us&lc=en&dlc=en#N121
Minimized Image Recovery does the following:
Re-installs the original operating system.
Re-installs all original hardware drivers.
Re-installs HP essential software (i.e., HP Support Assistant, HP Recovery Manager, etc.).
Does not install trial applications or trial games.
If there are user-created partitions on the hard drive, the HP Recovery Manager prompts you for permission to remove them or leave them intact. -
Minimized Image Recovery option still available?
I used to have an HP Mini netbook. If I needed to format the hard drive, I would use the HP Recovery Manager program. What made this program really nice is that there was an option called Minimized Image Recovery. This would format the hard hard, reinstall the operating system, a few HP maintenance programs, and the necessary drivers. Most importantly, NO "bloatware" was reinstalled. It was a truly clean format of the hard drive.
Do today's HP notebooks still offer the Minimized Image Recovery option, or has that been removed?
This question was solved.
View Solution.I don't have one of the latest with Windows 8 but the 9 month old DV6t 7000 loaner with Windows 7 I am using has Minimized Image Recovery. I think it is a lasting feature that HP realizes a lot of owners like.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
System Image Recovery on Win 7 - Spectre XT 13
There is no issue of creating a system image onto my seagate external Freeagent goflex hard disk. However, an issue is encountered during the restoring process in which the USB3.0 port turned out to be unavailable during pre-boot.
The solution I discovered is to plug the hard disk onto the USB2.0 port. I hope this will save someone several hours of trying to figure out where goes wrong.Yes, that is a known issue that affects several recovery softwares including HP's
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02906094&cc=us&dlc=en&lc=en -
How to create a full windows image recovery partition ?
Hi,
It's been about a month since I remplaced my HDD, because the original one which has the recovery partition was currupted...
So, I had to do a clean windows 8.1 x64 installation using my embedded windows 8 key
Now I would like to create a recovery partition with a full windows image that can be executed with F10 on the start up. just like the one that came with the original HDD
Please help...
Thanks in advance !Be sure and request a usb recovery flashdrive. The cost is usually around $30.00 USD
Ordering recovery media from HP
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Image Recovery for Cisco Aironet 1300 Outdoor Access Point
We purchased two 1300 APs for outside. There is a new release for the image that we wanted to use so, we have the latest security updates. We downloaded, logged onto the access point just fine, but the image never took. After four hours with a direct connection, it was still going and this morning we came in and it just keep rebooting. Our network guy states it looks like a corrupt image. We can barely do anything and since there is no "mode" button like the earlier models, I have not found anything on web sites or forums to help us reload a good image to the access point. I would appreciate any insight someone has and/or where to look for this. I logged on and downloaded about every manual on the 1300 I could find, but have not found a good way to fix this. Not even the upgrade tool will connect since it just keeps rebooting.
Hi Bruce,
Because (as you correctly noted) the 1300 does not have a mode button you could try this method;
Complete the steps in this section in order to reset Cisco IOS Software-based bridges:
If the privileged command prompt ap# is available in the CLI, the write erase command and the reload command erase the startup configuration and reset the unit.
If the GUI is available, choose System Software > System Configuration. Press the Reset to Defaults button.
Aironet 1300 Series Bridges do not have a MODE button to reset the AP to factory defaults. So, if neither the GUI or CLI is available with sufficient privileges, complete these steps to delete the current configuration and return the entire bridge settings to the factory defaults using the CLI.
Open the CLI with a Telnet session or a connection to the bridge console port.
Reboot the bridge by removing and reapplying power.
Allow the bridge to boot until the command prompt appears and the bridge begins to inflate the image.
Press ESC when you see lines that are similar to these on the CLI:
Loading "flash:/c1310-k9kw-7mx.v122_15_ja.200040314-k9w7-mx.v122_15_ja.20040314"
...#############################################################################Note: In order to access the boot loader, you must press ESC twice. But this action depends on the terminal-emulation software that you use.
Messages that are similar to these appear:
Error loading "flash:/c1310-k9kw-7mx.v122_15_ja.200040314-k9w7-mx.v122_15_
ja.20040314"
Interrupt within 5 seconds to abort boot process.
Boot process terminated.
The system is unable to boot automatically. The BOOT environment variable needs to
be set to a bootable image.
C1310 Boot Loader (C1310-BOOT-M), Version 12.2 [BLD-v122_15-ja_throttle.20040314 100]
bridge:At the bridge: prompt, issue the dir flash: command in order to view a directory of the Flash file system.
The directory is similar to this directory:
bridge: dir flash:
Directory of flash:/
2 -rwx 0 env_vars
5 drwx 384 C1310-k9w7-mx.v133_15_JA.20040314
3 -rwx 1128 config.txt
4 -rwx 5 private-config
3693568 bytes available (4047872 bytes used)
bridge:Delete or rename the files config.txt and env_vars, and reboot the bridge.
Note: Do not forget the / character before the filenames.
bridge: delete flash:config.txt
Are you sure you want to delete flash:/config.txt (y/n)?y
File "flash:/config.txt" deleted
bridge: delete flash:/env_vars
Are you sure you want to delete "flash:/env_vars" (y/n)?y
File "flash:/env_vars" deletedIssue the boot command in order to reboot the bridge at the bridge: prompt, or simply power cycle the bridge.
After the bridge reboots, reconfigure the bridge with the web browser interface, the Telnet interface, or Cisco IOS Software commands.
Note: The bridge is configured with the factory default values that include:
The IP address, which is set to receive an IP address with DHCP. If you do not have a DHCP server, you can access the bridge using the default IP address of 10.0.0.1 using HTTP/HTTPS or Telnet. Once you gain access to the bridge via Telnet or GUI, you can modify the IP address of the bridge.
Note: This default IP address of 10.0.0.1 becomes available only for a short period. So, make sure that you assign your own IP address to the bridge within that period of time.
The default username and password, "Cisco".
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#ca_1310_ser
One other thing, be careful with the new IOS that you aren't loading a LWAPP Recovery Image. (it almost sounds like what may have happened)
Hope this helps!
Rob -
Problem with Field image recovery software
Dears,
I updated cisco wlc 5508 FUS image, but field recovery image stayed the same, does this mean that fus is not upgraded, what can i do?
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.0.110.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS + LDPE
System Name...................................... NW2-WLC01
System Location.................................. Level 11 Server Room
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. SSO
IP Address....................................... 10.10.12.8
IPv6 Address..................................... ::
Last Reset....................................... Software reset
System Up Time................................... 0 days 21 hrs 29 mins 51 secs
System Timezone Location......................... (GMT +4:00) Muscat, Abu Dhabi
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180This is what you should see:
Cisco 5500 Series Wireless LAN Controllers
•Field Recovery Image is upgraded from 7.0.112.21 to 7.6.101.1
•Bootloader is upgraded to 1.0.20
•Offline Field Diagnostics is upgraded from 0.9.28 to 0.9.35
•FPGA Revision version is upgraded to 1.7
•Environment Controller (MCU) Image version is upgraded to 1.8
•USB Console Revision version is upgraded to 2.2
The issue is if you were upgrading the FUS to 1.9.0.0, you should of had console access to see what was going on. Typically the primary will download the image and write to flash and then the secondary would upload the image from the primary and write to flash. The secondary would need to be rebooted first then the primary. If the sysinfo didn't match between the two, then you need to upload the FUS 1.9.0.0 and do it again. This is if your have AP SSO enabled. If it's an N+1 configuration, then you need to upload the FUS 1.9.0.0 to the WLC that hasn't had everything upgraded and perform the upgrade again. From the console you can choose what you want upgraded by skipping the upgraded that is up to date.
-Scott -
Pdf image recovery from corrupt pdf files
the pdf file in which i kept my pictures gt corrupt. i used image extractor tools but for nothing. please help me. i am clueless what to do?
How silly was I as I had been using PDF files since the day I learned to operate the computer system and didn’t know anything about them. Then one day I realized that why don’t I learn something about PDF to become a mater in it.
As we know in these days, PDF files are most commonly used by worldwide. Belong to any part of the society, we as an individual or an organization use PDF files. Therefore it has become very essential element in computer service.
“Generally a PDF or Portable Document Format file is a self-contained cross-platform document which appears same as in the form of soft copy or hard copy. PDF files are used by all of us as they contain the complete formatting of the original document, including fonts and images, PDF files are highly compressed, allowing complex information to be downloaded efficiently.”
PDF is very popular due to its easiest form of transferring the files over and through the internet as it maintains the original formatting and secures the documents so nicely that other files’ formats don’t.
Any PDF file contains text or images and sometimes both i.e. text and images. It can be used for office presentation, school assignment or personal collection. But sometimes we don’t need the text part which is inside our PDF file. Occasionally, we need only the pictures from our PDF files. That time we usually do this: copy the images or pictures from the PDF files and then paste them in other new PDF file. That process of copy and paste takes a long time and makes us tired. So that time we need an application which can easily extract all the images and pictures from our PDF files in very short point of time.
But just think about this: How can you extract images and pictures from a PDF file which is corrupted. Because there is not any software application which can extract the images and pictures from a corrupt PDF file. Did I say no?
Actually there is a tool which can easily extract the images and pictures from not only a normal PDF file but also from a corrupt PDF file. With the help of this tool anyone can easily extract the images and pictures from a single or multiple PDF files of all versions such as 1.3/1.4/1.5/1.6/1.7, from Adobe Acrobat 3.x to Adobe Acrobat X either it is normal or corrupted as it is very simple to use. After extracting the images and pictures, it allows you to save them in different formats such as JPEG, BMP, PNG and GIF. It is one of the fastest extracting tools which does extraction process in no more time.
i used this tool as it was refered earlier in this thread, and i am totally satisfy from this tool : PDF Image Extractor from SysInfoTools. What a utility excellent work done by experts.
http://www.sysinfotools.com/recovery/pdf-image-extractor.html -
Can't do image recovery on 1250
Hi,
First of all I've read the link https://supportforums.cisco.com/docs/DOC-14636 and a lot of other pages.
What I have on the AP is:
ap: set
CRASH_LOG=yes
DEFAULT_ROUTER=10.0.0.1
ENABLE_BREAK=no
IOS_DEFAULT_DOMAIN_NAME=company.local
IOS_STATIC_DEFAULT_GATEWAY=10.4.254.1
IP_ADDR=10.0.0.1
MANUAL_BOOT=no
NETMASK=255.255.255.224
ROM_PERSISTENT_UTC=1298238069
TERMLINES=0
(I also have these lines as a wild shoot)
SERVER=10.0.0.3
TFTP_SERVER=10.0.0.3
so AP is default setting
I've also run the commmands:
load_helper
flash_init
ether_init
tftp_init
and then:
ap: tar -xtract tftp://10.0.0.3/c1250-rcvk9w8-tar.152-4.JB3.tar.default flash:
tftp://10.0.0.3/c1250-rcvk9w8-tar.152-4.JB3.tar.default: connection timed out
However no matter what I try it can't find the TFTP server. Which is really strange since I get an arp entry in the AP
ap: arp
255.255.255.255 ff:ff:ff:ff:ff:ff 0 40
10.0.0.3 f0:de:f1:17:29:7a 0 230
On the TFTP server (just a regular laptop) I've shut down the windows firewall (it's works with other devices so it's now a tftp server or FW issue).
What gets me really confused is I don't see an arp entry for the AP in the computer. I've tried with and without gateway (with the AP being the gateway and another address). I've tried with static arp entries and no matter what I do I can't find the AP on the computer. I've also had wireshark running on the interface on the computer that runs the tftp server I haven't seen anything from the ap at all. The AP doesn't respond to arp request from the computer (I've seen this in wireshark).
Anyone know what can cause all this and how it might be resolved. I can't be a physical conenction issue can it since I get the arp entry on the AP.
Thankful for any help.Hi Peter,
Did you try this using mode button ? If not try that method & see
1. Rename your recovery image "c1250-rcvk9w8-tar.152-4.JB3.tar" like "c1250-k9w7-tar.default"
2. Configure your PC 10.0.0.2 with Mask 255.0.0.0 & GW 10.0.0.1 & put that image on a TFTP server running on that PC
3. Directly connect AP ethernet to your PC & power on the AP while pressing the MODE button
4. Release the mode button after 20-30s & monitor your AP console output
5. You should see AP loaded the recovery image from your TFTP server
This post demonstrate this process & refer it for more detail
http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/
HTH
Rasika
**** Pls rate all useful responses **** -
ASA 5585-X IPS SSP system image recovery?
SSP-10 in slot 0
IPS SSP-60 in slot 1
This is not a supported configuration but does it actually work?
On one chassis the system image is missing from IPS SSP-60. I attempted hw-module recovery from tftp but it just gets stuck in recovery mode. IPS SSP console says pretty much says its in boot loop because it does not have a valid image.
The procedure I used
http://www.cisco.com/en/US/docs/security/ips/7.1/installation/guide/hw_system_images.html#wp1371782
I can download the image via tftp to flash but the recovery for IPS SSP just does't load from tftp.
When there are two modules in the chassis, the management port for IPS SSP-60 comes up (green) but I don't see management 1/0 port. Is it still referenced by management 0/0 on IPS SSP console?It sounds surprisingly about ASA5515 and SCM 4.3
coz of following URLs:
http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-4/release/notes/csmrn44.html#wp70531
Cisco Security Manager 4.4
In addition to resolved caveats, this release includes the following new features and enhancements:
•The following devices are now supported in Security Manager 4.4:
–ASA 9.0(1).
–ASA 9.1 and its compatible ASDM.
–ASA 8.4(5).
–Cisco Catalyst 7600 Series ASA Services Modules (ASA-SM).
–ASR backward compatibility support.
http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-5/release/notes/csmrn45.html#wp362107
Support for additional devices (for detailed compatibility information, refer to Supported Devices and Software Versions for Cisco Security Manager 4.5 ):
–IPS 7.1(8) and 7.2(1)
–ASA 8.4(6)
–ASA 9.1(2) and 9.1(3) (both standalone ASA and ASA-SM)
–ISR 4451 with IOS-XE 3.9 image
Maybe you are looking for
-
HELP! My phone won't let me text or call people. I can't open any messages or send messages. It freezes, the screen turns white and then closes.
-
How do I get my songs back on my computer after erroneously deleting them
I erroneously deleted all the songs I had purchased from i-Tunes from my computer. I re-installed i-Tunes and am trying to get my songs back on my computer. How doI do that?
-
File to mail scanario Dynamic name for e-mail attachments
Hi , I am using standard mail package for Dynamic name in the mail attachment. Content_Disposition : = attachment Content_Type = file name I am taking from DynamicConfiguration Now I received mail , but file name have (abc.txt.dat) extension .dat
-
Statistical postings for Internal oder
Hi During the month end as usual we settle the AUC documents to the asset,Once the settlement is done the values will be flown to the Financial acounting.menaing to say all the line items will be settled to the particular asset. Now lets say if i hav
-
3 options missing for Scan - Computer
I used to have 3 options on the Scan -> Computer screen. Now I only have the Photo to File Option and this creates a jpeg I believe. How can I get the 3 options back. I've done a reset to factory defaults and used HP's Scan Doctor app. Thanks Thi