Image resolution -not very good need help
Hello,
Im running a mac mini intel duocore 512mb or ram with a westinghouse 19" widescreen LCD with DVI cable. I have my desktop set to 1440 X 900.
Picture quality is stunning however, the video image quality is sometimes grainy and the colors are a little weak when I play a DVD or or video file.
Is ther anything I can do to enhance the video quality could it be a monitor or video card problem, maybe more RAM?
any suggestions would be appreciated thanks
This is a user to user help forum only so no one here can answer regarding what AppleCare or an Apple Store will do in this situation. Every warranty claim is on a case by case basis. If a fellow user tells you - sure Apple will exchange your iPhone and Apple doesn't exchange it due to the accidental damage, what you are told here carries no weight in this regard.
Similar Messages
-
Major Problems WIth Iphone 3G and Quality is not very good please help?
ok everyone this month i bought an iphone 3G and have experienced lots of problems,dropped calls phone turns off by itself for no reason and restarts,sometimes phone will be locked and music controls will show on the screen,i do have a dead pixel on the screen also, screen does not seem level like its not even or something, lock unlock button on top is uneven,i had the original iphone and it was built with quality this phone ***** really bad, well i made an appointment with a macgenuis to replace the phone, but today i accidently dropped it and no there is a two scratches in each corner and there seems to be a small gap between the screen and the metal on one side, this phone is really cheap quality, what i wanted to know if apple will still exchange the phone under warranty or now will they question it becuase i dropped it, but its not fair becuase the problem was before i dropped it and it was horrible and also i turn off 3G becuase sometimes i hear myself echoing and not the other person and sometimes also i hear a crackling noise.... please help what should i do
Message was edited by: dreydeyThis is a user to user help forum only so no one here can answer regarding what AppleCare or an Apple Store will do in this situation. Every warranty claim is on a case by case basis. If a fellow user tells you - sure Apple will exchange your iPhone and Apple doesn't exchange it due to the accidental damage, what you are told here carries no weight in this regard.
-
hi every i just bought an ipad 2 . en the cams resolution it's not very good. is the the max grafh. or do i need to do something to have cams hd???
Both cameras on the iPad are low resolution, something like 1 meg each (the back camera is capable of 720P HD video). But the cameras are mainly aimed at FaceTime / Skype type video calls, and unless you have very good light you are unlikely to get good stills photos or videos from the iPad - you are better off using a compact camera or even your phone.
-
Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!
That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer. -
Im not very good at troubleshooting, but I have played around with the system preferences. My airport connection is fine as well as the ethernet. Firewall says its not connected, (im not sure if that matters or not?)
I have subtracted my network from the list, restarted, and then put it back and and restarted...nothing seems to be working. Iam in the middle of a correspondace course and i really need my internet back...any suggestions would be greatly appreciated!
Thank youCould be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Then GULP, check for this...
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K. -
I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously please help?
YOur phone is in recovery mode, any data that was on there is already gone, you will have to restore your phone and use whatever backup you to restore to.
-
My ipad 2 is not very good picking up wi-fi signals
MY IPAD 2 is not very good at picking up wi-fi signials .I have a Kindle Fire and it has no problems in the same location .Is this a normal limitation for the IPAD or do I need a fix
labyrinth 2
It's possible it's that app that's the culprit.
Try syncing your apps but deselect the box next to labyrinth 2 in iTunes. Or, delete the app directly from the iPad by holding down the app until it jiggles then tap the circle with an x, then tap Delete. Press the Home button once or twice to stop all the icons from jiggling. You can always re sync the app using iTunes.
Then restart the iPad.Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
See if the screen will rotate.
If that doesn't help, try, "Reset All Settings". General / Reset. Tap Reset All Settings. That resets preferences and settings to default but contacts, calendars, and media won't be effected. -
my phone was not working only the restore button was available so i restored it and they told me i have to update my iphone 5s as well. i waited till the end the update software was downloaded successfully but then the iphone restarted by itself and now its not working. the iphone screen is shown the picture when you first time open the phone to connect it to an itunes. i connected it by it not working, i restart everything still not working:( i need help asap please. thankyou
it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.
-
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
-
Mail server not responding. Need help how to verify my account
Mail server not responding. Need help how to verify my account
There are instructions on this page for how to create a new account without giving credit card details (the instructions won't work with existing accounts) : http://support.apple.com/kb/HT2534
Unless an account is created via those instructions then credit card details will need to be entered on it before the account can be used. -
My review of X1 Carbon - Not very good...
Well, I just got my X1 Carbon yesterday. So far, not so good.
I have i7 with 8GB of RAM, 256 SSD and WWAN. Pretty much maxed out on the upgrades.
1. The computer is litterally crooked. When I place it on a hard flat surface (my kitchen counter), it doesn't lay flat. There is about 1 mm gap below the front right rubber foot and the counter. So every time I touch the trackpad, I get a click from the laptop tapping on the counter. Lovely. This is annoying as hell. Poor workmanship by Lenovo.
2. USB 3.0 Dock is an absolute joke. I am using the Targus ACP71USZ. They are all the same, regardless of which model you buy, since they all use Displaylink technology. On the m,onitors connected to the dock, the mouse responds with tiny delays, so it is very annoying and difficult to accurately point the mouse. Its bad with both HDMI and DVI. HDMI is worse. Ethernet, is pathetic. I don't even get a 1mb download speed at speedtest.net. Other computers on the same copnnection get over 20mb. Ping was 800ms vs 5ms for other computers. Absolutely pathetic. Wifi gave me 7mb with 100ms ping. Then I tried connecting the ethernet cable to the dongle that comes with the X1, directly to the X1, and not the dock. I got 18mb and 5ms ping. Much better, but this adds to the fact that the dock is a $200 peice of garbage. The only good way to use an external monitor is via the mini displayport on the X1 itself. So basically here is my setup. I have 2 external monitors. One goes to the DVI on the dock. Other to displayport on the X1. Ethernet dongle on the USB of the X1, power cable on the X1, USB to connect the X1 to the dock. I have to plug in 4 cables to the X1 just to dock it. Kind of defeats the purpose of the dock, and its worse since the dock works like crap anyway.
If I were to just use the X1 as a laptop, then it would be fine. But this machine absolutely stinks when used with a dock.
I am alrerady considering putting it on ebay.As for the T430s and the Series 3 dock I have, keep in mind it's the 135W dock I bought when I received the ThinkPad W510 for work. The problem I see with my dock and the T430s is that the T430s doesn't remember the configuration and state. So when I dock the notebook and boot it, it doesn't always display on the attached monitors. Or it changes which monitor is the primary. Or it displays only on one monitor at 800x600 resolution.
In short, it is unpredictable and very frustrating.
I have seen enough reports from other ThinkPad Optimus based models in this generation to know it isn't just me. There seems to be some issues with the chipset, drivers, and hardware integration.
There were no such issues with the T420 or T420s.
It is sad to see products take a step backward. You always think and expect continual improvement from generation to generation but it simply isn't true. You roll the dice each time. -
Windows Xp not detecting Ipod Need help
When i plug my ipod in to my desktop my ipod starts charging but it doesnt detect my ipod.I have even tried to do that restore thing where you hold menu/center button then when the apple logo appears hold center button/play or pause.I really really need help with getting my computer to detect my ipod.
Actually, the "vice-versa" part works, Macs can read and write Windows formatted iPods, but you can only manage music manually (syncing does not work until it it is restored for Mac). But back to the topic...
And it seems like this is a situation where the iPod has been working and now it does not. Please correct me if this assumption is wrong.
You have to eliminate the possible problems one by one, as many as possible. Starting at the computer... Note: These are separate things to try, not a single procedure.
Power down and restart the computer, if you have not already.
Try a different USB port.
Try a different docking cable, if possible. The connectors can become worn. Only two pins handle the power, so it is very possible for it to charge yet not connect for data.
The dock connector on the iPod may be worn out or have become faulty. Not much you can do about that, except have it replaced.
The "thing where you hold menu/center button" is not a restore. It is a reset (think rebooting your PC). Make sure you do it again following these instructions precisely.
http://support.apple.com/kb/HT1320
If this does not help, put the iPod into disk mode, and then connect it to the computer.
http://support.apple.com/kb/HT1363
If you manage to get iTunes to recognize the iPod, you may then want to do a restore (think reformatting your PC's hard drive and reinstalling Windows). This will erase the iPod and initialize its software. Then you can sync your iTunes library again. -
My Genius mixes is not working. Need help here. please...
I did reinstall my itunes 5 times and updated my Genius mixes many times as i could and yet the result is the same. i cant have my Genius mixes. Does anyone know how to fix this? please help. Thanks
Reset, hold both home and power buttons until the iPhone restarts. Usually takes about 10 seconds of holding both buttons. See if better. If not, Restore iPhone with iTunes on computer. See if better. If not you may need to replace the LCD Display or the iPhone may be beyond repair and you need a new phone.
-
Adobe reader not working. Needs help badly!!
I get this error message and will not read or open my PDF files pissing me off Please read and why is this doing this and how
do I fix this. Not happy!!
My error messge I get. I need help badly to fox this !!
Adobe reader could not open micro niche 14 Internet Marketing (1) zip because it is either not supported file type because the file
has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Can anybody Please help me !!!!!!!!!!!!!!!!!!!!!!!!!!
Michael Ladd and email is [removed]Adobe Reader cannot open ZIP files. It only opens PDF files.
-
Error msg. 1327 Drive not found REALLY NEED HELP
Hello,
I recently installed iTunes and ever since then whenever I try to install new software from a website I.E. Adobe.com "Reader" I get an error message saying F:\ drive not found, which there is not F:\ drive.
I have gone to administrative tools but have only found C:\ drive. Now, when I go to "Run" in the Start menu I see in the browse menu "F:\iTunes.exe and iTunesHelper.exe
My iTunes does work properly but on start-up do get an msg. saying it was not installed proberly and to re-install.
I do not want to re-install iTunes for fear I will get the same msg. and not be able to complete install.
Really need help on this because I need to install Acrobat Reader for work.
Thanks
Mark
[email protected]Doublechecking something.
Could you confirm for us both that error message number and message?
Checking, because the 1327 error message number usually comes with an "invalid drive" message rather than a "drive not found" message.
Maybe you are looking for
-
Can I create a home network withous dsl connection with airport express
can I create a home network without dsl connection with airport express? So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid conne
-
Can I jump between two presentations without exiting presentation mode?
is it possible to quickly jump between two separate presentations without having to go out of presentation / play mode ??
-
PP- MPS on Planning mode 2 (Re-Explode) create PldOrders
Dear all, We want to RUN MPS for Products (MRP type M0) only for Re-explode Bom components and not for PldOrd creation . We are running a background Job for re-explode with following parameters: Processing key - NETCH planning mode - 2 schedule line
-
Startup the Mobile Engine via Eclipse
Dear all, In our company, we are using the MAM for a couple of years. I am doing all the developments via Eclipse. For debugging the MAM or starting up the MAM from my development environment, I've made a small startup class which starts up the Mobil
-
InfoPath form failed to use NTLM authentication to load data - Invalid authorization specification
I knew this might be discussed in other places but I've searched over the web but still do not have a clue how to fix my issue. I am using SharePoint 2010 and I created an InfoPath form that reads data from a database using data connection file (udcx