Image S4i In-Ear Headset and iPhone 4 upgrade

I have the 3GS and am probably going to preorder the 4G tomorrow. I have the S4i In-Ear Headset- http://www.klipsch.com/na-en/products/image-s4i-overview/ -which are excellent for functionality and sound quality with the iPhone. Does anyone have any idea if these earphones will work with the new iPhone?
Thanks

Yes, I know you will be able to plug it in and hear the sound but what I'm asking is if the functionality will be there. The volume control, next song, last song, voice control, etc.

Similar Messages

Problen Pairing Jawbone Headset and iPhone

Anyone having problems pairing Jawbone headset and iPhone? I get a paired status but then the device wheel keeps spinning .... The Jawbone thinks it's paired but the phone doesn't. I've tried like 30 times and got it to work one. The Jawbone worked fine with my Sony/Ericsson.
Thanks!
John

So just wanted to post my approach to this problem. I love my jawbone. it has amazing sound quality. recently when apple sent out the software update to the iphone it wiped my iphone and required that i fully restore the settings from my computer. i did so but discovered that all of my bluetooth headset pairings had been deleted. i tried to restore it using the approach suggested in the support materials but received a constantly spinning wheel with the message "not discoverable." jawbone was recognized but said "not paired." jawbone kept timing out on the discovery sequence. finally i shut off the bluetooth function on my iphone and then turned off my jawbone device. i turned iphone back on and then activated the pairing function on the jawbone. on the iphone i exited the bluetooth menu (still spinning eternally). once i did that i activated my jawbone. on the iphone the menu to input the password came up. i input "0000". meanwhile back on the iphone bluetooth menu there was still endless spinning but now my jawbone was listed as "paired". exiting that i went to make a call to my vm and was gratified to see "audio" replace "speaker" in the upper righthand corner. hope this helps.

Email images not loading on iPad and iPhone 4

Images are not loading in certain emails on both my iPad and iPhone 4 over wifi. They're showing up as blue boxes with a white question mark inside. Also in the iPad app store, certain app icons are showing as whited out. If i shut off wifi on the phone, the images will load in the emails through 3g. Does anyone have any idea what would cause these issues and how to correct the problem?

Who is your ISP?
I had similar problems with both my iphone and ipad when using my wifi, but not when using cellular. Turned out to be a Comcast issue with their implementation of DNSSEC validation. You can see my full explanation on my blog at http://blog.trif.com/?p=295. The site is being blocked by Comcast because the Microsoft portal does not meet DNSSEC validation rules. This applies to Comcast DNS Servers 75.75.75.75 and 75.75.75.76.

The calendar app on MacBook won't recognize and sync with IPad and Iphone after upgrading to Yosemite and Server 4.0

After upgrading to Yosemite on our mac mini (from OS X 10.9) and V4.0 to Server (from 3.2), the calendar app on MacBook won't recognize the account and won't sync with IPad and Iphone. Even after giving password over and over again. I get the following message:
De server reageerde met
'500'
op de bewerking 'CalDAVAccountRefreshQueueableOperation'.
(Server responded with '500' on task 'CalDAVAccountRefreshQueueableOperation'
Anyone idea?

update to my original post: after searching since for the past 10 days - I did want to pass along to others with an iphone calendar sync problem the following resource:
Mac OS X: Resetting the SyncServices folder
http://support.apple.com/kb/TS1627
This is the preferred solution for problems with sync with calendar and other apps between iphone and MaciOS. This did solve the problem which developed that no items from iCal were copying to Iphone, such as new calendars I would add, but the original problem has not been fixed by this reset.

How do I export Illustrator images for iOS 7 iPads and iPhones

How do I take assets I've created in Illustrator and save them to the proper resolutions for iOS (retina, non-retina, iPhones and iPads, etc)?
I've looked at these pages, but they didn't help me understand what to do in Illustrator to get the intended result:
http://beageek.biz/how-to-create-launch-images-app-xcode-ios/
http://www.idev101.com/code/User_Interface/launchImages.html
http://www.axialis.com/tutorials/make-ipad-icons.html
Please do not give answers about Flash, Adobe AIR, or Photoshop. Those applications including Adobe AIR are not what I need help with.
The question is about Adobe Illustrator.
I'm building an application in xcode on a MacBook Pro and using Adobe Illustrator CC.
Thanks,
W

Should be OK to create your image in the respective pixel dimensions and then export at 72 ppi.

Jabra headset and iPhone issue

I have connected my iPhone to Jabra Extreme BT headset. But I can't hear SMS tone receiving. Is there any setting that resolve this

Hi Saima,
With the Cisco 7942, you would leverage the setting under
the product specific porting of the config via device>phone
and set Wireless Headset Hookswitch Control to Enabled
http://headsetplus.com/PDF/Jabra-EHS-guide.pdf
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen

Recommedation for on the ear headset for iphone 3

I don't find any of the in ear sets to be very comfortable for any length of time so am looking for a "on ear" style (a padded styles) headset that is comfortable but not too bulky. I would prefer the mic be the wand style as I use my phone frequently while walking the dog or riding my bike and the in-line mics pic up too much other noise. The headset brands and styles vary so much I'm not even sure where to start.
Thanks in advance for any suggestions.

Only purpose is to restore failed devices with firmware

Bose Mobile on ear headset not compatible with 3GS-hear no send

Just a heads up: have Bose Mobile on ear headset with in line microphone.
Was compatible with Apple 3G but not new 3GS. Probably a simple fix.
Sound in fine; just cuts out all the time or totally no transmit. Had Bose call me several times and same with other calls. At best very hard to hear reported on other end to no audio at all. Hope Bose/Apple can fix near future.

any news on developments here? Have just received my Bose on ear headset and get sound ok but receivers get choppy sound from me...really cannot use...have a 3GS 32GB
Nic

Can u suggest me the best in ear headset for my iphone 4s .. i am much confused...

i am confused in selecting the product of in ear headset,,, for my iphone 4s///// i am fond of music,,,
Bang & olufsen ---- Beo 3
Klipsch image S4i
Klipsch image x10i
urBeat in ear headset,

This is not the appropriate forum for this. You need to go to a product review website. Once you've chosen a headset, if you have problems using it with your phone then please don't hesitate to write back.

I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak - I think that my ear piece and mike have both got magnetised how do fix the problem

I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak -
I think that my ear piece and mike have both got magnetised how do fix the problem
Please help

I have the same problem!! It lead to many other problems with my phone
I just arranged a repair with apple. Yes its inconvenient to be without a phone for a while but if your phone is in warranty its good to get it looked at professionally!

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

Mixed results on iPad and iPhone 6 Plus with background image. How to fix this?

Flash Professional CC
I'm having an issue with adding images on iPhone 6 plus and iPad. I'm getting mixed results with two items: 1) a background image and 2) a button that should appear at the bottom left-hand corner on any device. In one case the background image appears enlarged and only shows about 30% of itself. In the other case, the bottom left-hand button appears about 50 pixels to the left when x=0. I also get different results when I set the following:
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
This does not produce the expected results. I would like to have consistent results across iPad and iPhone 6 plus, which seams to be an issue. The immediate fix for this is to leave the images on the stage instead of using addChild. I could then just stretch the background image so that it spans the whole screen. But I want to add the items dynamically for greater flexibility.
Here are two cases:
Case #1:
This an iPhone 6 plus and you should notice 2 things. 1) There is black and white on both sides. The blue background SHOULD APPEAR ACROSS THE WHOLE SCREEN. 2) The red button in the corner SHOULD APPEAR IN THE LEFT MOST CORNER OF THE
SCREEN.
Case #2:
This an iPhone 6 plus and I have set the scale X, Y to the stage.stageWidth/Height:
mc_stageBackground_Main.scaleX = stage.stageWidth;
mc_stageBackground_Main.scaleY = stage.stageHeight;
This results in a close up of the background image.
Here is the code that I'm using:
import com.greensock.TweenLite;
import com.greensock.easing.*;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
//When this is active the background image spans across the device (iPhone 6 plus) correctly. The main logo image does not line up correctly.
/*stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;*/
var main_logo:MC_LOGO_MAIN = new MC_LOGO_MAIN();
var mainBackground_2208: MC_MAIN_BACKGROUND_2208 = new MC_MAIN_BACKGROUND_2208();
var mainBackground_1024: MC_BACKGROUND_1024 = new MC_BACKGROUND_1024();
var mainCorner: MC_MAINCORNER = new MC_MAINCORNER();
var chapters: MC_CHAPTERS = new MC_CHAPTERS();
var _stageWidth = 1024;
if (stage.stageWidth > _stageWidth)
    //Add bigger background if the stage is bigger than 1024
    mainBackground_2208.x = stage.stageWidth/2;
    mainBackground_2208.y = stage.stageHeight/2;
    addChild(mainBackground_2208);
    //Using this code results in a very close up view of the stage on iPhone 6 plus
    /*mc_stageBackground_Main.scaleX = stage.stageWidth;
    mc_stageBackground_Main.scaleY = stage.stageHeight;*/
    //Adds corner to the main screen.
    mainCorner.y = stage.stageHeight;
    mainCorner.x = (stage.stageWidth - stage.stageWidth);
    addChild(mainCorner);
    TweenLite.from(mainCorner, 1,{ height: 0, width: 0, delay:1, ease:Elastic.easeOut});
    //add logo to sit at 50 pixels from the top of the stage
    /*main_logo.x = stage.stageWidth/2;
    main_logo.y = (stage.stageHeight -stage.stageHeight + main_logo.height *.6);
    addChild(main_logo);
    TweenLite.from(main_logo, 1,{ y: -main_logo.height, ease:Elastic.easeOut});*/
else
    trace ("The stage is 1024 or smaller");
    //Add 1024 background if stage is 1024 or smaller
    mainBackground_1024.x = stage.stageWidth/2;
    mainBackground_1024.y = stage.stageHeight/2;
    addChild(mainBackground_1024);
    //Adds corner to the main screen.
    mainCorner.y = stage.stageHeight;
    mainCorner.x = (stage.stageWidth - stage.stageWidth);
    addChild (mainCorner);
    TweenLite.from(mainCorner, 1,{ height: 0, width: 0, delay:1, ease:Elastic.easeOut});
    //adds chapters
    chapters.x = (stage.stageWidth - stage.stageWidth)+75;
    chapters.y = stage.stageHeight - 120;
    addChild(chapters);
    TweenLite.from(chapters, 1,{ height: 0, delay:.5, ease:Elastic.easeOut});
    //adds the Main logo to sit at 50 pixels from the top of the stage
    main_logo.x = stage.stageWidth/2;
    main_logo.y = (stage.stageHeight -stage.stageHeight + main_logo.height *.6);
    addChild(main_logo);
    TweenLite.from(main_logo, 1,{ y: -main_logo.height, ease:Elastic.easeOut});

On all of the devices go to settings - facetime - iphone cellular calls - oFF, this part of Apple continuity.

For some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store.

for some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store. my old iphone 4s audio jack was messed up but i just got a new one with my warranty , can anyone help me please.

It doesn't matter what it is in your backup that's causing the problem because you can not selectively restore things from your backup. It's all or nothing.
Set you phone up as a new device and start over.

My IT department transferred images from my Blackberry to my Iphone, they are in "Photo library". there is 1500 images, many are duplicates and when I hit edit, delete is not an option. how do i delete the duplicate images?

my IT department set up my Iphone and transferred the images from my Blackberry. I have over 1500 images showing in "Photo Library" and lots of them are duplicates (same image). When I hit edit it will not allow me to delete them, delete is not an option shown. How do I get rid of the duplicates?
In Photo library, when I hit edit the only avail options are share or add to. Please help, i dont want 1500 images on the phone.

Are they really duplicates or are you simply referring to the Photo Library?
Just as a song is in your itunes library and the exact same song can be accessed via a playlist, all synced photos are in the Photo Library and those exact same photos ( not duplicates) can be accessed from the chose folder/album.
You delete these pica the same way you put them there. The sync process. Deselect them in itunes and sync.

I have proplem in my iphone 5 in ear phone and i want send my iphone 5 for you how can ?

i have proplem in my iphone 5 in ear phone and i want send my iphone 5 for you how can ?

Try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If you try restoring from a backup and that doesn't fix the problem, try restoring to factory settings and synching your apps. You'll lose the app data and settings, but if the problem is due to a corrupt cache or settings file, that should cure it. If that still fails to correct the problem, take or send the iPhone to Etisalat for replacement.
Regards.

Image S4i In-Ear Headset and iPhone 4 upgrade

Similar Messages

Maybe you are looking for