Image scrambled position with doctype transitional

Good Mornig.
I have made a site, using a Photoshop CS4 to get an table slicing page, then work in DWCS4.    In the top of the page, in first row we have include an swf, en second row two gif's with a link, in third row -split in two cols- we have included anhother swf and text from db.
the problem is that usign a transitional doctype the upper swf some times show any place in the page but not a its position.  We fixed in css rule, and now the two gifts are playing around the page.  The problem gets worst, due that in a  IE8 / Vista the problem doesn't show but in IE8/xp  the problem shoews, but doesn't happend always.  
any idea why this happen.
Thaks for your help

Got a link to your website?
It's easier than trying to visualize written descriptions.

Similar Messages

  • Need help with CS4 transitions

    Hi,
    I am trying to use a cross dissolve transition. To make it simple, I have two clips. I'm obviously doing something wrong here. I've watched the Adobe TV tutorial and all the guy does is to select cross dissolve from the effects box, and drags it over to the clip on the timeline. I think I am doing the exact same thing, but when I play my clip back, I can see no transition effect played back.
    Maybe I'm putting it in the wrong place I thought, so I tried putting it in front of the split between the two clips. Then again at the beginning of the second clip. Neither of them worked, so I shut CS4 down, and booted it up again. I started a new project, and put two new clips in it. I put the dissolve transition at the beginning of the second clip, and it worked like a charm. Then to see if that was a fluke, went to a point about 3 minutes earlier in the timeline. So now I am on clip one. I go and make a cut in the timeline, and try to place another Cross dissolve at this spot. It appears to place the transition there because it creates the rectangular box, and it has the name cross dissolve in that rectangular box,but when I try to play it to see the transition, it isn't working. Go back to the beginning of the second clip, and that one still works perfectly.
    I noticed that there is a difference in the appearance of the two cross dissolve rectangular boxes. The one that works has a single diagonal line that goes from lower left to upper right in the cross dissolve box, and then there are a whole series of diagonal lines that go from upper left to lower right all across the cross dissolve box . It looks like a whole bunch of dark gray and white backslashes. In the one that doesn't work, there is just that single diagonal line that goes from lower left to upper right. No backslashes on this one. What am I doing right in the first one, but not in the second?
    I find that it will work perfectly if I put in a new clip. If I put in the Cross Dissolve at the beginning of a new clip that I add to the timelime,  it will work perfectly. It is only when I try to split a clip that is already on the timeline, and then put the cross dissolve in at that point.
    Perhaps it is not possible to do what I am attempting to do. Maybe you can't split a clip and place the transition at that point?

    When I am shooting video, it is not unusual for me to be taping a scene of a mountain, for example, and then put the camera on pause, while I briefly position myself to take video of the river that is flowing at my feet. That is what is happened on this clip that I am attempting to put the transition in between. Rather than having the scene just instantly change at this point, from the mountain to the river, it would be nice to have a smoother transition then that.
    My mind was working on the problem while sleeping last night, and I think I might understand how to handle it. It might have been too simple for me to think about yesterday. I haven't tried it yet, but would it not work, to insert the mountain scene from my source monitor into the timeline, and then go back and insert the river scene into the time line instead of inserting both of them at the same time. Would these not now be two separate clips on the timeline, and the transition could now be applied?
    Your analogy with the DJ is very good, but it isn't quite the same. You are correct in that he would be only fading from one song to the same spot on the same song. In my case I am going from an image of a mountain to an image of a river. Same clip, but different images. I appreciate the help, and your thoughts.
    Terry Lee Martin
    Date: Sat, 22 Aug 2009 23:15:55 -0600
    From: [email protected]
    To: [email protected]
    Subject: Need help with CS4 transitions
    From a creative standpoiint, I don't understand the desire to transition from one clip to the exact same spot on that same clip.  That's like a DJ at a night club fading from one song to the exact same spot on that same song being played on a second CD player.  What's the point?
    >

  • Help for WindowedApplication resizing with the transition from center to foursquare?

    Any idea to resolve the WindowedApplication window to resize with the transition from center to foursquare?
    thanks a lot!
    David

    Use the Tween class to transition the window's current width and height properties to their final width and height. Register a function to receive one of the tween's "motionChange" event so you can reposition the window accordingly when its w and h are changed. You'll need to measure the window's bounds and position at each step to make sure it's not outside the screen bounds, or smaller/larger than allowed. How you resize the interior stage content is up to you...

  • Spry navbar position with other page elements.

    2 questions on positioning  a horizontal navbar with other page elements.
    1.) I replaced a standard horizontal navbar with a spry horizontal bar.
    Below the navbar is a simple image div- centering an image on the page.
    The image is placed with auto margins r/l to stay centered.
    After I replaced the standard navbar with the Spry navbar, the centered image now appears to the right.
    What I want is the original design-  the Spry navbar to be positioned above the image, drop down menu items can appear over the centered image.
    My edited Spry page is not live until it works correctly- the original page without the new menu bar is here- michael-davidson.com)
    2.) My plan is to keep the navbar on all my pages- so I'll set it up in a template.
    Many of my pages wil consist of simpleviewer galleries- like this; simpleviewer gallery- will it work to put a drop down above the gallery?
    Will there be a problem having the Spry navbar drop down over the simpleviewer gallery?
    thank you.
    btw- I did search for the answer to this positioning question, but could not find it. If there is a guide for positioning a Spry navbar, I'd love to read it!
    thank you

    I may have missed it, but I didn't see any style rule that positions your div#navbar. I may be wrong, but it seems to me that if you don't style the div, it will sit on the left of your page.
    When you put Spry Menubars above Flash elements, Flash will as a rule put itself in front of other elements.
    Try changing this:
    AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','width','632','height','238','src','home-flash','quality','high','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','home-flash' ); //end AC code  
    To this:
    AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wmode','opaque','width','632','height','238','src','home-flash','quality','high','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','home-flash' ); //end AC code 
    This is from another thread: http://forums.adobe.com/thread/419243
    Beth

  • Unable to write an image to excel with report generation toolkit

    I am unable to write an image to excel with the report generation toolkit. The VI works fine for word, but when I select Excel the speadsheet pens but remains blank.

    Ranjeet
    I am using Labview 2013 or 8.0, but here is an image of the very simple test VI.
    Regards
    Steve

  • Images in XML with DataShell

    I'm playing around with the Data Set Shell with Accordion.
    Here is the HTML page sample:
    http://www.nerealestatephotos.com/Janseneering/RC1.html
    // click on the "News" panel in the Accordion...
    and one of the XML pages:
    http://www.nerealestatephotos.com/Janseneering/news.xml
    I need an image to load with the data that is in the
    <desc> element and display it in the appropriate table cell.
    I've tried giving the <desc> element an <img src="">
    attribute, I've tried to load the image using a full URL
    encapsulated in CDATA, etc etc. No luck. As you can see, I'm a bit
    of a newbie.
    I've had moderate success with putting <img src={image}
    alt="" /> within the detailregion like this:
    <div spry:detailregion="dsShell" class="SpryHiddenRegion">
    <table border="1" class="detail">
    <tr>
    <th>
    <img src={image} alt="" />{desc}</th>
    </tr>
    </table>
    The problem with this is that it displays on *every* page,
    even the ones that don't have images. Not a problem with Firefox,
    Safari and Opera since they just don't display anything if there is
    no <image></image> element in the XML. IE on the other
    hand gives me the dreaded red "X".

    Hi,
    You would put something like:
    spry:if="'{image}' != 'undefined'"
    in your IMG tag.
    <img src={image} alt="" spry:if="'{image}' !=
    'undefined'"/>
    That will only print the tag if there is some value for
    {image}.
    Hope this helps.
    Don

  • HT201210 I tried to do an update to the Ios 5 but it failed tried to restore my iphone however all im left with is an image of itunes with a usb connector please help as my phone will no longer work!!

    Hi I tried to do an update on my Iphone 4 hardware but it failed (dont knoyw why) I followed instructions to restore my Iphone unfortunatel all im left with is an image of itunes with a usb and a dead phone can someone help???

    Hey, I aggree with Tempelton for the most part, but if you are an advanced user on the computer on the phone, there is one thing you can try. There is a program called RecBoot, which might help you, and here is a page that might help you. http://jaxov.com/2010/05/recboot-iphone-recovery-mode/ If you are not an advanced user, I would NOT recomend using RecBoot, and just proceeding with the restore. A little consolation could be that you probably had Photo Stream on, and you might have been backing up to iCloud, which should mean you'll have some stuff after the resote. Sorry this happened!

  • Adding item positions with reference to contract in sales order

    Hi all,
    I would be very grateful if some of you could help on this:
    I have a requirement to add lines with reference to a contract while the user is creating or modificating it via VA01 or VA02. The logic flow will be as follows:
    if the user enters a new item position with reference to a contract, and the qty entered exceeds the qty in the position selected of the contract, we have to skip the standard error message and try to spli the quantities in several positions with the same material in the contract.
    As an example:
    the contract 000000000001 has 5 lines:
    line     material       qty
    01       mat1           100
    02       mat1           50
    03       mat1           50
    04       mat2           n/a
    05       mat2           n/a
    if the user picks up the line 02 of the contract to create a new line in the sales order, and enters 180 as qty, the sap standard will raise an error, saying the qty has exceeded the contract qty. Ok, we have to skip that error (maybe could we set it as a warning??) and 'split' the qty as follows:
    in the sales orders, 3 lines will be created automatically
    line    material     qty
         mat1         100
         mat1         50
         mat1         30
    and of course, the released quantities in the contract must be updated: i.e the contract should be as follows:
    line     material       available qty
    01       mat1           0
    02       mat1           0
    03       mat1           20
    Any ideas? : )
    What i've done by the moment is to check is that 'split' is possible, in userexit_save_document. If not (e.g. if the user enters 220 for mat1 in the previous example), a custom error will appear. If it is possible, then the sales order will be created (only with the line the uswer entered) and I will trigger somehow a FM processed in background to modify the sales order.
    my question now is: how can i add lines to the created sales order, making reference to some contract lines?
    I've seen BAPI BAPI_SALESORDER_CREATEFROMDAT2 is used to create a document with reference, but can i use it to MODIFY an existing sales order?
    any help would be greatly appreciated.
    thanks a lot for your help.
    regards.

    Hello,
    there's a function module called 'BAPI_SALESORDER_CHANGE', which could change a sales order. The problem could be,that these BAPI's enque the salesorder. So if you start them in background via an userexit, you have to be sure that the salesorder is updated and dequeued by posting.
    An other way could be to use the exit 'userexit_check_vbap' in MV45AFZB. It's called after creating a new position or changing a position. All existing positions at that time in a internal table 'XVBAP', which you could change. (But be carefull, that you don't create an endless loop !).  
    The check about the contract quantity is in a form routine called 'vbep-wmeng_pruefen_folgebeleg(sapfv45e)'.
    Have a look into the form 'vbap_pruefen_ende' in FV45PFAP_VBAP_PRUEFEN_ENDE. There's the whole thing done including the call of the userexit.
    Regards Wolfgang

  • Imported image's position moves when updated in Indesign CS6. Why??

    After modifying an imported image from illustrator, the imported image's position moves within the frame of Indesign CS6 when the link is updated.

    You have not provided any relevant information, so nobody can know. you can simply have added content that expands the bounding box. Well, whatever, ask in the relevant forums and be much more specific.
    Mylenium

  • Billing Document positions with zero

    Hi Guys,
    I am having an error when creating SD Billing Document. I have a sales order with some position with net value 0 and when I create the billing document I dont want this positions to be copied.
    I know I can reject this positions on the sales order, but this process is something automatic and there is no control.
    Is there anything I can do on the control copy to avoid copying values on 0 from sales order to billing document?
    I hope you can hel me.
    J. Garibaldi

    Hi,
    You can create a new item category " ZXXX"and make it as not relevant for billing in billing relavancefield and also maintain the item category determintaion settings.
    Now when you have line item with 0 value change the item category to "ZXXX" and save the document . So when you create a billing for the respective sales order the particular line item with item cat as "ZXXX" will not be copied.
    OR
    You can create a new routine in the transaction VOFM and assign it in the copy control of order --> billing at item cat level.
    Please go through the below link to create the new routine
    http://saptechsolutions.com/pdf/VOFMCopyRequirementRoutines.pdf
    Hope this will help you to resolve your issue!!
    Regards,
    Krishna O

  • Embed Video PDF InDesign Booklet with Page Transitions & Playable Video

    e.g.
    http://help.adobe.com/en_US/InDesign...3D6C6A460.html
    also such as:
    http://www.page-flip.com (although yet to implement  feature...)
    So...
    Is there any way to get embedded video within pdf - once placed in  InDesign - to export (either swf or xfl) creating a booklet-type  publication with page transitions (curl/ page-flip) with the videos  playable?

    Only Adobe Acrobat or Reader can show those PDFs (and many others) correctly. Are you sure that the PDF was opened in one of these 2 applications and not in Apple Preview or Ghostviewer or something else?
    Only Adobe Reader 9 and X and Acrobat 9 and X can show PDFs with Flash content correctly. If you have an older version, let us say Version 8 or older, you are not able to see Flash content at all. If you have a newer version, that is Reader XI or Acrobat XI you need additional Adobe Flash player have installed on that computer and allow access to your PDFs. Can you check, if these substantial requirement are fulfilled?

  • Space between DIV with image and DIV with image background

    I have just about finalized the new design on my website. The only issue I am having now is on the gallery page.  There is a thin space between a DIV with an image and DIV with an image background.  I am using these DIV's to give the illusion of a blue border. If you look at any of the other main pages on the site the space is not there. Any ideas? 
    http://liquidfirefishing.com/index.php
    http://liquidfirefishing.com/gallery/main.php
    Here are a couple of screenshots to show exactly what I mean.

    Hello, 
    both my "IE8" and my "FF 7.01" show the blue boundary lines. Here my screenshots, left side IE8, right side FF:
    Header 1
    Header 2
    Hans-Günter

  • Cannot view embedded images in emails with iPad mini

    Hi there - I can't view embedded images in emails with iPad mini. Any reason why?
    Can anyone help?

    I am having the same problem + I cannot download pdf attachment effectively.
    This all happened after I upgraded the iOS to 7.x.  In iOS 6.x, everything was working fine. I was able to see all the images in the email and, when I clicked on the pdf attachment, it would ask me if I want to save the pdf file to iBook.  Right now, I cannot have either ones working.
    I am using iPad 2. 

  • Why are some jpg images scrambled when they appear in my screen saver?   The same images look fine in Preview and Finder.  Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

    Why are some jpg images scrambled when they appear in my screen saver?   The same images look fine in Preview and Finder.  Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

    The desktop image is fine, taken from the exact same pool of jpg photos.  However, as soon as the slide show screen saver comes on, the images are scrambled.  What is it about the apple screen saver algorithm that scrambles the pics?

  • No thumbnail images in icons with Preview since reinstall of Tiger

    Since a HDD crash and reinstall of Tiger at Apple Store with updates to 10.4.11, Preview.app is now NOT making image thumbnails but only shows an icon with the Preview logo and file type, ie. JPEG, PNG.
    Also in Folders most images, but not all, are not showing up as they used to with miniature images.
    This makes it very hard to tell what the image is merely with a number for the filename.
    I tried deleting the plist but that didn't help. Anyone have any suggestions how to get real thumbnails back?

    Hi BDAqua,
    Thanks for the suggestions. I tried it several times to no avail and noticed that an older version of Preview which had been archived on an external drive was 13.2 MB on disk while the one which the Apple Store put onto the new hard drive was only 3 MB, even though they are both v3.0.9 (build 409) I've tried both and there doesn't appear to be any difference in functionality.
    Still no thumbnails except on a few .jpgs. They do work from iPhoto if they are normal .jpg pictures if I drag the pic to the desktop from the iPhoto Library, but not panoramas which have been stitched, photos which have been cropped, modified or .gif or .tiff.
    Guess we'll just have to keep looking for the answer to why they won't show up all the time.
    Thanks anyway.
    If anyone else has any ideas about this Preview weirdness, please join in...

Maybe you are looking for