Image selected does not match Navigator

Hi
I cannot get my navigator to match the image I am looking at.
Please help.

Click cursor on an image in the Library Grid view will show that image in Navigator.
but Hover the cursor over a thumbnail in the Filmstrip (or anywhere over the folder panel) and Navigator will show the image under the cursor.
So do not leave the mouse cursor placed above the filmstrip or folders panel- may be an answer.

Similar Messages

ERROR ITMS-9000: "File given does not match type JPEG ... Image is likely corrupt

Hi ALl,
On compliing my book get these errors with ITunes producer...I've resaved the files out with photoshop and they seems fine?
Package Summary:
1 package(s) were not uploaded because they had problems:
          /Users/Umran/Music/iTunes Producer/Playlists/9780957408654.itmsp - Error Messages:
                    Apple's web service operation was not successful
                    Unable to authenticate the package: 9780957408654.itmsp
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1cf629f[userString=An unknown error occured while parsing. Image is likely corrupt. Exception message: null]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1801285[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1e056e9[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@11d58e0[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@127c00e[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-5107: "VirtualLandscapesTheModernEra20002012.epub: Fixed-layout books must supply a text or bodymatter starting location in the guide." at Book (MZItmspBookPackage)
Any advice??? Hope someone can help!

iBookstore Publisher Support send me a fast response email which included some helpful info:
Please make sure that all image files inside the ePub end with one of the following: ".tif", ".jpg", or ".png" and that the file itself matches the file extension type. To check if the image file matches the file extension type, please right click on the image then select "Get Info". Once the info tab appears, please make sure that the file extension type of the image file matches the "Kind" found under "General".
For further information regarding embedded images, please refer to the iBookstore Asset Guide, which is available for download in the Deliver Your Content module in iTunes Connect.
And they INCLUDED THE TRANSPORTER LOG (!), the log generated by iTunes Producer as it tries to upload a book. We were able to search for the Validation Error # within the log and find out which image Producer was trying to upload when it encountered an error. Turns out the problem was a corrupted screenshot jpeg.
Grateful!

CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
Jeremy

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

The parameter name [...] in the query's selection criteria does not match..

Hi all,
I'm trying to pratice EJB 3 (which I learnt at school), with JSF and JPA, but i'm really stuck with that error :
Exception [TOPLINK-6094] (Oracle TopLink Essentials - 2.0 (Build b41-beta2 (03/30/2007))): oracle.toplink.essentials.exceptions.QueryException
Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query.
Query: ReadAllQuery(oracle.datamodel.Employees)
I will try to explain clearly what i'm trying to do :
In fact, i'm following that tutorial :
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
But, as i didn't have any oracle database, but had a mysql one on my machine, i decided to use that DB instead of the the oracle DB... So i created a set of example data (to replace the oracle example set) ...so i created the tables EMPLOYEE, and DEPARTMENT... with the correct relations (FK) and PK)
All was ok, i choose my "mysql-connector" (jdbc) instead of the oracle jdbc connector... so i could follow the tutorial.
My problem appears at the step 12 (of "Creating a Master-Detail JavaServer Faces Page"), when i run the file deptEmployees.jspx.
The information of the first departement displays correctly :
departmentID 1
departmentName ... etc
but it can't display the employees belonging to that department !
the error is :
JBO-29000: Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query. Query: ReadAllQuery(oracle.datamodel.Employees)
I think i understand what is the problem... I think that the query in charge of gathering the data of a specific departement need a parameter, but couldn't find it. But i don't know why :-/ I have tried many things and read the topics talking about that error... but it didn't solved the problem. I don't know anymore where to investigate.
I have created a Zip file of my work (it's an EJB/JSF Application.. with jdev 10.1.3.3.0)
(available here : http://dl.free.fr/mQ5esdQuS/EJB_appli.zip)
I would be glad if someone could take few minutes to help me.
Thank you in advance,
Thomas B (student)

Hello,
This is a common mistake. Java string comparisons in TopLink are case sensitive by default, and since column names are uppercase when defaulted, TopLink cannot find the "departmentID" column name. In this case, Departments ID column defaults to "DEPARTMENTID" as required by the JPA specification.
Either change Departments id annotation to     @Id
    @Column(name="departmentID", nullable = false)
    private Integer departmentID;or change Employees' ManytoOne annotation to:
    @ManyToOne
    @JoinColumn(name = "departmentID", referencedColumnName = "DEPARTMENTID")
    private Departments departments;Best Regards,
Chris

Paper detected does not match paper size or type selected

Says paper mismatch! Paper detected does not match paper size or type selected. I have a 6600. Can some help?

Hi,
Try updating the printer firmware, the latest version should improve its paper handling.
Follow these steps to get the latest update for the printer and then check for any differencex:
http://support.hp.com/us-en/product/HP-Officejet-6600-e-All-in-One-Printer---H711a/H711g/4322968/mod...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Output does not match data sheet as only 1 report was available for selecti

Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

You will need to provide much more detailed information before anybody can help.
Cheers
John
http://john-goodwin.blogspot.com/

Hp pro 8600 error Paper detected does not match paper size or type selected .

hp pro 8600 error "Paper detected does not match paper size or type selected" for Copies from tray one . There has been no change in the paper always used in tray one. Prints documents with no problem from Tray One with same paper. Copies from Tray 2, same paper, no problem. Have restarted the printer, same error. When I try to copy using Tray one, the to be copied document does not feed, and the printer kicks out a blank page using Tray One Paper.

Hello marathonmama,
Welcome to the HP Forums.
I see that you are having an issue with a Paper Mismatch error on the printer.
Please click the following link that deals with an HP Single-Function and Multifunction Printers - 'Paper Mismatch,' or 'Paper Size Mismatch' Error Mes....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Print Res Unchecked, Image does not match native resoltuion

Many of my images already have their resolution and height/width dimensions set in PS. My understanding is that when the print resolution checkbox is unchecked in LR, then the image should be at its native resolution and size and will print the same size as when printed from PS.
However, I find that when I uncheck the resolution checkbox, the image size as shown in LR Print module does not match the native resolution and size. For example a psd file in PS CS3 shows an image size of 16 x 10.25 @ 200 ppi. In LR the same image shows a print size of 15.3 x 9.81 @ 209 ppi. I have checked both tif and psd files, and similar discrepancies exist.
I wonder if I am doing something wrong or misunderstanding something? Thanks for your help

That was Page Setup, sorry (which actually opens a Print Setup dialogue, at least on a PC). There you can choose printer and paper size. Then in Layout panel you choose how to arrange the picture(s) within the page, and the combination of the two will determine the print size, right?
Anyway, I believe I understand your concern now, which is about printing at 100% of the size indicated by the TIFF or PSD file, as PS can do. I did not find a way to direct LR to do the same.
The Print Resolution, when unchecked, doesn't behave like you expect. If you check it, LR will re-sample the image to print it at the resolution you indicated there, whatever the output size. If you un-check it, LR will not re-sample the image; still it will re-size it based on your Page Setup and Layour settings, and the printer driver/printer will do the needed re-sampling. At least this is my understanding.

CS4 Upgrade, the serial number you have entered does not match the product you have selected

I have a valid CS2 premium license and have installed CS4 upgrade to a new machine but get the dreaded error "the serial number you have entered does not match the product you have selected" Now I got this error when I originally installed in 2009, back then I could call customer service and get the problem resolved but now when I phone I get an automated message saying phone support is not available for CS4? Does anyone know of a work around or a UK number where I can get this resolved? Any help would be appreciated.

Please see: http://www.hp.com/country/us/en/mda/windows7/upgrade/index_ww.html to select your correct country or region.
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

PhotoSmart3210 All in one "Paper detected does not match paper size or type selected."

All of a sudden i cannot copy any document with my 3210 All In One. I keep getting the message shown above on the screen.

Hi @nunzio317
I would like to help you with your Photosmart 3210. I understand that when you copy you see a message on the printer that says "Paper detected does not match paper size or type selected". Does this also happen when you print from the computer, or only when you copy? Have you tried copying a different size paper, and what size paper are you currently using?
Are you able to print a self test report? If you are unsure, please try, and let me know;
Load plain white paper into the tray.
Press the Setup button.
Press 1 to display the Print Report menu.
Press 1 again to select Self-Test Report. The self-test report prints.
- Source
If this also happens when you print from the computer, please use the following document as it can help you to resolve the issue; 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
I hope this helps.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Windows 8 error "product key does not match any of the Windows images available for installation"

Hi Experts
My HP Pavilion laptop came with window 8. I made the USB recovery for windows 8 using hp recovery manager. My windows was corrupted, while I was trying to install windows 7 in dual boot.
I used above USB recovery to restore factory default. But every time it is giving me error "HP Recovery Manager Failed error code = 0xefffff08"
Then I downloaded the OEM ISO mage for windows 8 and tried to do the clean install but now installation process is giving me error "The product key entered does not match any of the Windows images available for installation. Enter a different product key"
Please help me. To whom I have to contact?

Hi ghost-rider,
Thank you for your query, I will do my best to assist you.
I understand you tried to do a recovery and you received this error "oxefffff08".
First I would suggest you run a hardware diagnostics. Testing for Hardware Failures (Windows 8)
If no hardware failures are located, you have ruled that possibility out.
Here is a link to Troubleshooting HP System Recovery Problems (Windows 8) that may help.
If you are still having an issue doing a recovery, I suggest contacting HP support and explain the issue you are having with doing a recovery. They may have another option available for you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap
The clean install from an OEM image is looking for the product code as it does not match the one that came with the computer, You would need a new code.
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

The product key entered does not match any of the Windows images available for installation. Enter a different product key.

how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "

That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

The software that you choose does not match the Selected Printer

Hi Friends,
I am trying to install a network Printer suing my Win Xp SP3 PC.
Since there is no drivers installed in this PC, I tried to select Have Disk option in the Bonjour Printer Setup Wizard and selected the INF file provided by the Manufaturer. When i select the INF file and click ok, It prompts with message "The software that you choose does not match the Selected Printer".
But the Manufaturer name is listed under the Manufacturer Tab and nothing on the Model Tab.
Any idea why i am getting this error message. Please help me if anyone is aware of this.

I haven't seen Apple use a "shared secret". and believe this must be a message from the magazine app. I suggest asking the magazine, as this appears not to be an Apple problem.

Routing does not match selection ID 01

Hi all,
I have query while run the costing (CK11N) for Assembly Material. Error displays as "Material X: Routing does not match selection ID 01".
This Assembly Material has Routing with 2 Direct and 5 In-direct opeartions as well as defined the Labor for Direct Operations with respect to the CC assigned in WC.
Can anyone help me out why this error occurs?
Regards,
Sundhu

Dear Sundareswari,
Goto OKKN->select the Costing variant that you have used in CK11N and under control tab goto quantity structure control
>check the value or ID assigned for routing selection.
As per this your routing gets selected in CK11N or CK40N.
Check and revert
Regards
S Mangalraj

Image selected does not match Navigator

Similar Messages

Maybe you are looking for